Library for Modtronix NZ32 STM32 boards, like the NZ32-SC151, NZ32-SB072, NZ32-SE411 and others
nz32s_default_config.h
- Committer:
- modtronix-com
- Date:
- 2016-08-19
- Revision:
- 17:86034c970ea0
- Parent:
- 15:3fd3c1ce01be
File content as of revision 17:86034c970ea0:
/** * File: nz32s_default_config.h * * Author: Modtronix Engineering - www.modtronix.com * * Description: * * Software License Agreement: * This software has been written or modified by Modtronix Engineering. The code * may be modified and can be used free of charge for commercial and non commercial * applications. If this is modified software, any license conditions from original * software also apply. Any redistribution must include reference to 'Modtronix * Engineering' and web link(www.modtronix.com) in the file header. * * THIS SOFTWARE IS PROVIDED IN AN 'AS IS' CONDITION. NO WARRANTIES, WHETHER EXPRESS, * IMPLIED OR STATUTORY, INCLUDING, BUT NOT LIMITED TO, IMPLIED WARRANTIES OF * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE APPLY TO THIS SOFTWARE. THE * COMPANY SHALL NOT, IN ANY CIRCUMSTANCES, BE LIABLE FOR SPECIAL, INCIDENTAL OR * CONSEQUENTIAL DAMAGES, FOR ANY REASON WHATSOEVER. */ #ifndef MODTRONIX_NZ32S_NZ32S_DEFAULT_CONFIG_H_ #define MODTRONIX_NZ32S_NZ32S_DEFAULT_CONFIG_H_ //This file requires a file called "modtronix_config.h" to exist in the project! //Use this file to override any of the default defines below. Do NOT edit this file! #if !defined(NO_MODTRONIX_CONFIG) #include "modtronix_config.h" #endif // Copy from here to custom nz32s_defines.h file ////////////////////////////// //Set to 0 to disable A13 and A14 from being used(are SWD serial program/debug ping). Must be done if //debugging is going to be used. These pins are used by ST-Link for programming debugging, but also used //for battery level monitoring, and enabling fast battery charge. Setting this define to 0 will disable these //functions, but will enable programming and debugging via SWD (ST-Link) #if !defined(NZ32S_USE_A13_A14) #define NZ32S_USE_A13_A14 0 #endif //Defines is Windowed or Independent Watchdog timer should be used. Windowed Watchdog Timer, is topped during //low power mode, but Independent is NOT(will reset CPU). Use WWDG if CPU will go to low power mode #if !defined(NZ32S_USE_WWDG) #define NZ32S_USE_WWDG 1 #endif // End of contents to copy to custom nz32s_defines.h file ///////////////////// #endif /* MODTRONIX_NZ32S_NZ32S_DEFAULT_CONFIG_H_ */