An I/O controller for virtual pinball machines: accelerometer nudge sensing, analog plunger input, button input encoding, LedWiz compatible output controls, and more.

Dependencies:   mbed FastIO FastPWM USBDevice

Fork of Pinscape_Controller by Mike R


This is Version 2 of the Pinscape Controller, an I/O controller for virtual pinball machines. (You can find the old version 1 software here.) Pinscape is software for the KL25Z that turns the board into a full-featured I/O controller for virtual pinball, with support for accelerometer-based nudging, a real plunger, button inputs, and feedback device control.

In case you haven't heard of the concept before, a "virtual pinball machine" is basically a video pinball simulator that's built into a real pinball machine body. A TV monitor goes in place of the pinball playfield, and a second TV goes in the backbox to serve as the "backglass" display. A third smaller monitor can serve as the "DMD" (the Dot Matrix Display used for scoring on newer machines), or you can even install a real pinball plasma DMD. A computer is hidden inside the cabinet, running pinball emulation software that displays a life-sized playfield on the main TV. The cabinet has all of the usual buttons, too, so it not only looks like the real thing, but plays like it too. That's a picture of my own machine to the right. On the outside, it's built exactly like a real arcade pinball machine, with the same overall dimensions and all of the standard pinball cabinet hardware.

A few small companies build and sell complete, finished virtual pinball machines, but I think it's more fun as a DIY project. If you have some basic wood-working skills and know your way around PCs, you can build one from scratch. The computer part is just an ordinary Windows PC, and all of the pinball emulation can be built out of free, open-source software. In that spirit, the Pinscape Controller is an open-source software/hardware project that offers a no-compromises, all-in-one control center for all of the unique input/output needs of a virtual pinball cabinet. If you've been thinking about building one of these, but you're not sure how to connect a plunger, flipper buttons, lights, nudge sensor, and whatever else you can think of, this project might be just what you're looking for.

You can find much more information about DIY Pin Cab building in general in the Virtual Cabinet Forum on Also visit my Pinscape Resources page for more about this project and other virtual pinball projects I'm working on.


  • Pinscape Release Builds: This page has download links for all of the Pinscape software. To get started, install and run the Pinscape Config Tool on your Windows computer. It will lead you through the steps for installing the Pinscape firmware on the KL25Z.
  • Config Tool Source Code. The complete C# source code for the config tool. You don't need this to run the tool, but it's available if you want to customize anything or see how it works inside.


The new Version 2 Build Guide is now complete! This new version aims to be a complete guide to building a virtual pinball machine, including not only the Pinscape elements but all of the basics, from sourcing parts to building all of the hardware.

You can also refer to the original Hardware Build Guide (PDF), but that's out of date now, since it refers to the old version 1 software, which was rather different (especially when it comes to configuration).

System Requirements

The new config tool requires a fairly up-to-date Microsoft .NET installation. If you use Windows Update to keep your system current, you should be fine. A modern version of Internet Explorer (IE) is required, even if you don't use it as your main browser, because the config tool uses some system components that Microsoft packages into the IE install set. I test with IE11, so that's known to work. IE8 doesn't work. IE9 and 10 are unknown at this point.

The Windows requirements are only for the config tool. The firmware doesn't care about anything on the Windows side, so if you can make do without the config tool, you can use almost any Windows setup.

Main Features

Plunger: The Pinscape Controller started out as a "mechanical plunger" controller: a device for attaching a real pinball plunger to the video game software so that you could launch the ball the natural way. This is still, of course, a central feature of the project. The software supports several types of sensors: a high-resolution optical sensor (which works by essentially taking pictures of the plunger as it moves); a slide potentionmeter (which determines the position via the changing electrical resistance in the pot); a quadrature sensor (which counts bars printed on a special guide rail that it moves along); and an IR distance sensor (which determines the position by sending pulses of light at the plunger and measuring the round-trip travel time). The Build Guide explains how to set up each type of sensor.

Nudging: The KL25Z (the little microcontroller that the software runs on) has a built-in accelerometer. The Pinscape software uses it to sense when you nudge the cabinet, and feeds the acceleration data to the pinball software on the PC. This turns physical nudges into virtual English on the ball. The accelerometer is quite sensitive and accurate, so we can measure the difference between little bumps and hard shoves, and everything in between. The result is natural and immersive.

Buttons: You can wire real pinball buttons to the KL25Z, and the software will translate the buttons into PC input. You have the option to map each button to a keyboard key or joystick button. You can wire up your flipper buttons, Magna Save buttons, Start button, coin slots, operator buttons, and whatever else you need.

Feedback devices: You can also attach "feedback devices" to the KL25Z. Feedback devices are things that create tactile, sound, and lighting effects in sync with the game action. The most popular PC pinball emulators know how to address a wide variety of these devices, and know how to match them to on-screen action in each virtual table. You just need an I/O controller that translates commands from the PC into electrical signals that turn the devices on and off. The Pinscape Controller can do that for you.

Expansion Boards

There are two main ways to run the Pinscape Controller: standalone, or using the "expansion boards".

In the basic standalone setup, you just need the KL25Z, plus whatever buttons, sensors, and feedback devices you want to attach to it. This mode lets you take advantage of everything the software can do, but for some features, you'll have to build some ad hoc external circuitry to interface external devices with the KL25Z. The Build Guide has detailed plans for exactly what you need to build.

The other option is the Pinscape Expansion Boards. The expansion boards are a companion project, which is also totally free and open-source, that provides Printed Circuit Board (PCB) layouts that are designed specifically to work with the Pinscape software. The PCB designs are in the widely used EAGLE format, which many PCB manufacturers can turn directly into physical boards for you. The expansion boards organize all of the external connections more neatly than on the standalone KL25Z, and they add all of the interface circuitry needed for all of the advanced software functions. The big thing they bring to the table is lots of high-power outputs. The boards provide a modular system that lets you add boards to add more outputs. If you opt for the basic core setup, you'll have enough outputs for all of the toys in a really well-equipped cabinet. If your ambitions go beyond merely well-equipped and run to the ridiculously extravagant, just add an extra board or two. The modular design also means that you can add to the system over time.

Expansion Board project page

Update notes

If you have a Pinscape V1 setup already installed, you should be able to switch to the new version pretty seamlessly. There are just a couple of things to be aware of.

First, the "configuration" procedure is completely different in the new version. Way better and way easier, but it's not what you're used to from V1. In V1, you had to edit the project source code and compile your own custom version of the program. No more! With V2, you simply install the standard, pre-compiled .bin file, and select options using the Pinscape Config Tool on Windows.

Second, if you're using the TSL1410R optical sensor for your plunger, there's a chance you'll need to boost your light source's brightness a little bit. The "shutter speed" is faster in this version, which means that it doesn't spend as much time collecting light per frame as before. The software actually does "auto exposure" adaptation on every frame, so the increased shutter speed really shouldn't bother it, but it does require a certain minimum level of contrast, which requires a certain minimal level of lighting. Check the plunger viewer in the setup tool if you have any problems; if the image looks totally dark, try increasing the light level to see if that helps.

New Features

V2 has numerous new features. Here are some of the highlights...

Dynamic configuration: as explained above, configuration is now handled through the Config Tool on Windows. It's no longer necessary to edit the source code or compile your own modified binary.

Improved plunger sensing: the software now reads the TSL1410R optical sensor about 15x faster than it did before. This allows reading the sensor at full resolution (400dpi), about 400 times per second. The faster frame rate makes a big difference in how accurately we can read the plunger position during the fast motion of a release, which allows for more precise position sensing and faster response. The differences aren't dramatic, since the sensing was already pretty good even with the slower V1 scan rate, but you might notice a little better precision in tricky skill shots.

Keyboard keys: button inputs can now be mapped to keyboard keys. The joystick button option is still available as well, of course. Keyboard keys have the advantage of being closer to universal for PC pinball software: some pinball software can be set up to take joystick input, but nearly all PC pinball emulators can take keyboard input, and nearly all of them use the same key mappings.

Local shift button: one physical button can be designed as the local shift button. This works like a Shift button on a keyboard, but with cabinet buttons. It allows each physical button on the cabinet to have two PC keys assigned, one normal and one shifted. Hold down the local shift button, then press another key, and the other key's shifted key mapping is sent to the PC. The shift button can have a regular key mapping of its own as well, so it can do double duty. The shift feature lets you access more functions without cluttering your cabinet with extra buttons. It's especially nice for less frequently used functions like adjusting the volume or activating night mode.

Night mode: the output controller has a new "night mode" option, which lets you turn off all of your noisy devices with a single button, switch, or PC command. You can designate individual ports as noisy or not. Night mode only disables the noisemakers, so you still get the benefit of your flashers, button lights, and other quiet devices. This lets you play late into the night without disturbing your housemates or neighbors.

Gamma correction: you can designate individual output ports for gamma correction. This adjusts the intensity level of an output to make it match the way the human eye perceives brightness, so that fades and color mixes look more natural in lighting devices. You can apply this to individual ports, so that it only affects ports that actually have lights of some kind attached.

IR Remote Control: the controller software can transmit and/or receive IR remote control commands if you attach appropriate parts (an IR LED to send, an IR sensor chip to receive). This can be used to turn on your TV(s) when the system powers on, if they don't turn on automatically, and for any other functions you can think of requiring IR send/receive capabilities. You can assign IR commands to cabinet buttons, so that pressing a button on your cabinet sends a remote control command from the attached IR LED, and you can have the controller generate virtual key presses on your PC in response to received IR commands. If you have the IR sensor attached, the system can use it to learn commands from your existing remotes.

Yet more USB fixes: I've been gradually finding and fixing USB bugs in the mbed library for months now. This version has all of the fixes of the last couple of releases, of course, plus some new ones. It also has a new "last resort" feature, since there always seems to be "just one more" USB bug. The last resort is that you can tell the device to automatically reboot itself if it loses the USB connection and can't restore it within a given time limit.

More Downloads

  • Custom VP builds: I created modified versions of Visual Pinball 9.9 and Physmod5 that you might want to use in combination with this controller. The modified versions have special handling for plunger calibration specific to the Pinscape Controller, as well as some enhancements to the nudge physics. If you're not using the plunger, you might still want it for the nudge improvements. The modified version also works with any other input controller, so you can get the enhanced nudging effects even if you're using a different plunger/nudge kit. The big change in the modified versions is a "filter" for accelerometer input that's designed to make the response to cabinet nudges more realistic. It also makes the response more subdued than in the standard VP, so it's not to everyone's taste. The downloads include both the updated executables and the source code changes, in case you want to merge the changes into your own custom version(s).

    Note! These features are now standard in the official VP releases, so you don't need my custom builds if you're using 9.9.1 or later and/or VP 10. I don't think there's any reason to use my versions instead of the latest official ones, and in fact I'd encourage you to use the official releases since they're more up to date, but I'm leaving my builds available just in case. In the official versions, look for the checkbox "Enable Nudge Filter" in the Keys preferences dialog. My custom versions don't include that checkbox; they just enable the filter unconditionally.
  • Output circuit shopping list: This is a saved shopping cart at with the parts needed to build one copy of the high-power output circuit for the LedWiz emulator feature, for use with the standalone KL25Z (that is, without the expansion boards). The quantities in the cart are for one output channel, so if you want N outputs, simply multiply the quantities by the N, with one exception: you only need one ULN2803 transistor array chip for each eight output circuits. If you're using the expansion boards, you won't need any of this, since the boards provide their own high-power outputs.
  • Cary Owens' optical sensor housing: A 3D-printable design for a housing/mounting bracket for the optical plunger sensor, designed by Cary Owens. This makes it easy to mount the sensor.
  • Lemming77's potentiometer mounting bracket and shooter rod connecter: Sketchup designs for 3D-printable parts for mounting a slide potentiometer as the plunger sensor. These were designed for a particular slide potentiometer that used to be available from an seller but is no longer listed. You can probably use this design as a starting point for other similar devices; just check the dimensions before committing the design to plastic.

Copyright and License

The Pinscape firmware is copyright 2014, 2021 by Michael J Roberts. It's released under an MIT open-source license. See License.

Warning to VirtuaPin Kit Owners

This software isn't designed as a replacement for the VirtuaPin plunger kit's firmware. If you bought the VirtuaPin kit, I recommend that you don't install this software. The VirtuaPin kit uses the same KL25Z microcontroller that Pinscape uses, but the rest of its hardware is different and incompatible. In particular, the Pinscape firmware doesn't include support for the IR proximity sensor used in the VirtuaPin plunger kit, so you won't be able to use your plunger device with the Pinscape firmware. In addition, the VirtuaPin setup uses a different set of GPIO pins for the button inputs from the Pinscape defaults, so if you do install the Pinscape firmware, you'll have to go into the Config Tool and reassign all of the buttons to match the VirtuaPin wiring.

Sat Apr 18 19:08:55 2020 +0000
TCD1103 DMA setup time padding to fix sporadic missed first pixel in transfer; fix TV ON so that the TV ON IR commands don't have to be grouped in the IR command first slots

Who changed what in which revision?

UserRevisionLine numberNew contents of line
mjr 35:e959ffba78fd 1 // UPDATES
mjr 35:e959ffba78fd 2 //
mjr 35:e959ffba78fd 3 // This is a record of new features and changes in recent versions.
mjr 35:e959ffba78fd 4 //
mjr 35:e959ffba78fd 5
mjr 35:e959ffba78fd 6 // January 2016
mjr 35:e959ffba78fd 7 //
mjr 35:e959ffba78fd 8 // Dynamic configuration: all configuration options are now handled dynamically,
mjr 35:e959ffba78fd 9 // through the Windows config tool. In earlier versions, most configuration options
mjr 35:e959ffba78fd 10 // were set through compile-time constants, which made it necessary for everyone
mjr 35:e959ffba78fd 11 // who wanted to customize anything to create a private branched version of the
mjr 35:e959ffba78fd 12 // source repository, edit the source code, and compile their own binary. This
mjr 35:e959ffba78fd 13 // was cumbersome, and required way too much technical knowledge to be worth the
mjr 35:e959ffba78fd 14 // trouble to a lot of people. The goal of the new approach is that everyone can
mjr 35:e959ffba78fd 15 // use the same standard binary build, and set options from the Windows tool.
mjr 35:e959ffba78fd 16 //
mjr 56:195d891653c6 17 // TSL1410R and 1412R high-speed scanning: the software now takes advantage
mjr 56:195d891653c6 18 // of the KL25Z's fastest hardware features to scan the optical sensors at much
mjr 56:195d891653c6 19 // higher speed than in the past. The software can now read these sensors at
mjr 56:195d891653c6 20 // full resolution in about 2.5ms, which means a frame rate of about 400 frames
mjr 56:195d891653c6 21 // per second. That's fast enough that we can capture images of the plunger
mjr 56:195d891653c6 22 // moving at full release speed without any significant motion blur, and fast
mjr 56:195d891653c6 23 // enough to capture the position throughout a release motion without any
mjr 56:195d891653c6 24 // aliasing from the bounce-back at the end of the travel. In past versions,
mjr 56:195d891653c6 25 // the frame rate wasn't high enough to avoid either blur or aliasing, so it
mjr 56:195d891653c6 26 // was necessary to use heuristics to guess when a release was happening. The
mjr 56:195d891653c6 27 // heuristics worked pretty well, but at the cost of some slight lag while we
mjr 56:195d891653c6 28 // waited to see what was happening. The new higher rate allows for essentially
mjr 56:195d891653c6 29 // zero lag, as well as more precise position sensing.
mjr 35:e959ffba78fd 30 //
mjr 39:b3815a1c3802 31 // Keyboard mappings for buttons: button inputs can now be mapped to keyboard
mjr 39:b3815a1c3802 32 // keys. Joystick buttons are of course also still supported. Some software on
mjr 39:b3815a1c3802 33 // the PC side is easier to configure for keyboard input than for joystick
mjr 39:b3815a1c3802 34 // input, so many users might prefer to map some or all buttons to keys. If
mjr 39:b3815a1c3802 35 // you map any buttons to keyboard input, the controller device will have
mjr 39:b3815a1c3802 36 // two entries in the Windows Device Manager list, one as a joystick and
mjr 39:b3815a1c3802 37 // the other as a keyboard. This is automatic; the keyboard interface will
mjr 39:b3815a1c3802 38 // appear automatically if you have any keyboard keys mapped, otherwise only
mjr 39:b3815a1c3802 39 // the joystick interface will appear.
mjr 39:b3815a1c3802 40 //
mjr 39:b3815a1c3802 41 // "Pulse" buttons: you can now designate individual button inputs as pulse
mjr 39:b3815a1c3802 42 // mode buttons. When a button is configured in pulse mode, the software
mjr 39:b3815a1c3802 43 // translates each ON/OFF or OFF/ON transition in the physical switch to a
mjr 39:b3815a1c3802 44 // short virtual key press. This is especially designed to make it easier
mjr 39:b3815a1c3802 45 // to wire a coin door switch, but could be used for other purposes as well.
mjr 39:b3815a1c3802 46 // For the coin door, the VPinMAME software uses the End key to *toggle* the
mjr 39:b3815a1c3802 47 // open/closed state of the door in the simulation, but it's much easier
mjr 39:b3815a1c3802 48 // to wire a physical on/off switch to the door instead. Pulse mode bridges
mjr 39:b3815a1c3802 49 // this gap by translating the on/off switch state to key presses. When
mjr 39:b3815a1c3802 50 // you open the door, the switch will go from OFF to ON, so the controller
mjr 39:b3815a1c3802 51 // will send one short key press, causing VPinMAME to toggle the simulated
mjr 39:b3815a1c3802 52 // door to OPEN. When you close the door, the switch will go from ON to
mjr 39:b3815a1c3802 53 // OFF, which will make the controller send another short key press, which
mjr 39:b3815a1c3802 54 // in turn will make VPinMAME toggle the simulated door state to CLOSED.
mjr 39:b3815a1c3802 55 // There are other ways to solve this problem (VP cab builders have come
mjr 39:b3815a1c3802 56 // up with various physical devices and electronic timer circuits to deal
mjr 39:b3815a1c3802 57 // with it), but the software approach implemented here is a lot simpler
mjr 39:b3815a1c3802 58 // to set up and is very reliable.
mjr 39:b3815a1c3802 59 //
mjr 39:b3815a1c3802 60 // Night mode: you can now put the device in "night mode" by configuring a
mjr 39:b3815a1c3802 61 // physical button input to activate the mode, or by sending a command from
mjr 39:b3815a1c3802 62 // the PC config tool software. When night mode is activated, outputs that
mjr 39:b3815a1c3802 63 // you designate as "noisemaker" devices are disabled. You can designate
mjr 39:b3815a1c3802 64 // any outputs as noisy or not. This feature is designed to let you use your
mjr 39:b3815a1c3802 65 // virtual pinball machine during quiet hours (e.g., late at night) without
mjr 39:b3815a1c3802 66 // disturbing housemates or neighbors with noise from flippers, knockers,
mjr 39:b3815a1c3802 67 // shaker motors, and so on. You can designate outputs individually as
mjr 39:b3815a1c3802 68 // noisy, so you can still enjoy the rest of your feedback features during
mjr 39:b3815a1c3802 69 // night play (e.g., flashers and other lighting effects).
mjr 39:b3815a1c3802 70 //
mjr 40:cc0d9814522b 71 // Gamma correction: each output can now optionally have gamma correction
mjr 40:cc0d9814522b 72 // applied. This can be set in the configuration individually for each
mjr 40:cc0d9814522b 73 // output attached to an LED or lamp. Gamma correction translates the
mjr 40:cc0d9814522b 74 // computer's idea of linear brightness to the human eye's logarithmic
mjr 40:cc0d9814522b 75 // brightness curve, which makes make the perceived brightness level of a
mjr 40:cc0d9814522b 76 // lamp more linear. This can greatly improve the appearance of fading
mjr 40:cc0d9814522b 77 // effects and the fidelity of color mixing in RGB devices. Without gamma
mjr 40:cc0d9814522b 78 // correction, fades tend to saturate on the bright end of the scale, and
mjr 40:cc0d9814522b 79 // mixed colors tend to look washed out.
mjr 40:cc0d9814522b 80 //
mjr 39:b3815a1c3802 81 // USB fixes: the low-level USB device code had some serious bugs that only
mjr 39:b3815a1c3802 82 // very occasionally manifested in past versions, but became much more
mjr 39:b3815a1c3802 83 // frequently triggered due to other changes in this release (particularly
mjr 39:b3815a1c3802 84 // the USB keyboard input feature). These should now be fixed, so the USB
mjr 39:b3815a1c3802 85 // connection should now be very reliable.
mjr 39:b3815a1c3802 86 //