File content as of revision 7:6ec33d31f87f:

/* 
 / _____)             _              | |
( (____  _____ ____ _| |_ _____  ____| |__
 \____ \| ___ |    (_   _) ___ |/ ___)  _ \
 _____) ) ____| | | || |_| ____( (___| | | |
(______/|_____)_|_|_| \__)_____)\____)_| |_|
    (C)2015 Semtech

Description: MBED LoRaWAN example application

License: Revised BSD License, see LICENSE.TXT file include in the project

Maintainer: Miguel Luis and Gregory Cristian
*/
#include "stm32f103c8t6.h"
#include "mbed.h"

#include "lmic.h"
#include "debug.h"

/*!
 * When set to 1 the application uses the Over-the-Air activation procedure
 * When set to 0 the application uses the Personalization activation procedure
 */
 
#define SINGLE_CHANNEL_GATEWAY                      1
#define OVER_THE_AIR_ACTIVATION                     1

#if( OVER_THE_AIR_ACTIVATION == 0 )

/*!
 * Defines the network ID when using personalization activation procedure
 */
#define LORAWAN_NET_ID                              ( uint32_t )0x00000000

/*!
 * Defines the device address when using personalization activation procedure
 */
#define LORAWAN_DEV_ADDR                            ( uint32_t )0x12345679

#endif

/*!
 * Defines the application data transmission duty cycle
 */
#define APP_TX_DUTYCYCLE                            60000 // 5 [s] value in ms 1min
#define APP_TX_DUTYCYCLE_RND                        50000 // 1 [s] value in ms

/*!
 * LoRaWAN Adaptative Data Rate
 */
#define LORAWAN_ADR_ON                              1
//#define LORAWAN_ADR_ON                              1

/*!
 * LoRaWAN confirmed messages
 */
//#define LORAWAN_CONFIRMED_MSG_ON                    1
#define LORAWAN_CONFIRMED_MSG_ON                    1
/*!
 * LoRaWAN application port
 */
#define LORAWAN_APP_PORT                            15

/*!
 * User application data buffer size
 */
#if ( LORAWAN_CONFIRMED_MSG_ON == 1 )
#define LORAWAN_APP_DATA_SIZE                       6

#else
#define LORAWAN_APP_DATA_SIZE                       1

#endif

//////////////////////////////////////////////////
// CONFIGURATION (FOR APPLICATION CALLBACKS BELOW)
//////////////////////////////////////////////////

//fe dc ba 98 76 54 32 10
// application router ID (LSBF)
static const uint8_t AppEui[8] =
{
   0xb8, 0x27, 0xeb, 0xff, 0xff, 0xef, 0x00, 0x62
};

// unique device ID (LSBF)
static const u1_t DevEui[8] =
{
0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00
};

// device-specific AES key (derived from device EUI)
static const uint8_t DevKey[16] = 
{
    
    0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 
    0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00
};

#if( OVER_THE_AIR_ACTIVATION == 0 )
// network session key
static uint8_t NwkSKey[] = 
{ 
    0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
    0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00
};

// application session key
static uint8_t ArtSKey[] = 
{ 
    0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
    0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00
};

#endif

// LEDs and Frame jobs
osjob_t rxLedJob;
osjob_t txLedJob;
osjob_t sendFrameJob;
DigitalOut  myled(LED1);

// LED state
static bool AppLedStateOn = true;

//////////////////////////////////////////////////
// Utility functions
//////////////////////////////////////////////////
/*!
 * \brief Computes a random number between min and max
 *
 * \param [IN] min range minimum value
 * \param [IN] max range maximum value
 * \retval random random value in range min..max
 */
int32_t randr( int32_t min, int32_t max )
{
    return ( int32_t )rand( ) % ( max - min + 1 ) + min;
}

//////////////////////////////////////////////////
// APPLICATION CALLBACKS
//////////////////////////////////////////////////

// provide application router ID (8 bytes, LSBF)
void os_getArtEui( uint8_t *buf )
{
    memcpy( buf, AppEui, 8 );
}

// provide device ID (8 bytes, LSBF)
void os_getDevEui( uint8_t *buf )
{
    memcpy( buf, DevEui, 8 );
}

// provide device key (16 bytes)
void os_getDevKey( uint8_t *buf )
{
    memcpy( buf, DevKey, 16 );
}

//////////////////////////////////////////////////
// MAIN - INITIALIZATION AND STARTUP
//////////////////////////////////////////////////

static void onRxLed( osjob_t* j )
{
    debug_val("LED2 = ", 0 );
}

static void onTxLed( osjob_t* j )
{
    debug_val("LED1 = ", 0 );
}

static void prepareTxFrame( void )
{
    LMIC.frame[0] = AppLedStateOn;
#if ( LORAWAN_CONFIRMED_MSG_ON == 1 )
    LMIC.frame[1] = LMIC.seqnoDn >> 8;
    LMIC.frame[2] = LMIC.seqnoDn;
    LMIC.frame[3] = LMIC.rssi >> 8;
    LMIC.frame[4] = LMIC.rssi;
    LMIC.frame[5] = LMIC.snr;
#endif    
}

void processRxFrame( void )
{
    switch( LMIC.frame[LMIC.dataBeg - 1] ) // Check Rx port number
    {
        case 1: // The application LED can be controlled on port 1 or 2
        case 2:
            if( LMIC.dataLen == 1 )
            {
                AppLedStateOn = LMIC.frame[LMIC.dataBeg] & 0x01;
                debug_val( "LED3 = ", AppLedStateOn );
            }
            break;
        default:
            break;
    }
}

static void onSendFrame( osjob_t* j )
{
    prepareTxFrame( );
    LMIC_setTxData2( LORAWAN_APP_PORT, LMIC.frame, LORAWAN_APP_DATA_SIZE, LORAWAN_CONFIRMED_MSG_ON );

    // Blink Tx LED
    debug_val( "LED1 = ", 1 );
    os_setTimedCallback( &txLedJob, os_getTime( ) + ms2osticks( 25 ), onTxLed );
}

// Initialization job
static void onInit( osjob_t* j )
{
    // reset MAC state
    LMIC_reset( );
    //LMIC_setAdrMode( LORAWAN_ADR_ON );
    LMIC_setAdrMode(0);
    LMIC_setLinkCheckMode(0);
    LMIC_disableTracking ();
    LMIC_stopPingable();
   // LMIC_setDrTxpow(DR_SF7,14);
    
#if defined(CFG_eu868)
    //LMIC_setDrTxpow( DR_SF12, 14 );
    LMIC_setDrTxpow(DR_SF12,14);
#elif defined(CFG_us915)    
    LMIC_setDrTxpow( DR_SF10, 14 );
#endif

    // start joining
#if( OVER_THE_AIR_ACTIVATION != 0 )
    LMIC_startJoining( );
#else
    LMIC_setSession( LORAWAN_NET_ID, LORAWAN_DEV_ADDR, NwkSKey, ArtSKey );
    onSendFrame( NULL );
#endif
    // init done - onEvent( ) callback will be invoked...
}

int main( void )
{

  #ifdef SINGLE_CHANNEL_GATEWAY
   //MAX_CHANNELS = 1;
   //MAX_BANDS = 1;
   //LIMIT_CHANNELS = 1;
  for (int i=1; i<16; i++)
   LMIC_disableChannel(i);
    #endif
    //confSysClock();
    //DigitalOut  myled(LED1);
    myled = 0;      // turn the LED on
    
    osjob_t initjob;
    // initialize runtime env
    os_init( );
    // setup initial job
    os_setCallback( &initjob, onInit );
    // execute scheduled jobs and events
    os_runloop( );
    // (not reached)
}

//////////////////////////////////////////////////
// LMIC EVENT CALLBACK
//////////////////////////////////////////////////
void onEvent( ev_t ev )
{
    bool txOn = false;
    debug_event( ev );

    switch( ev ) 
    {
    // network joined, session established
    case EV_JOINED:
        debug_val( "Net ID = ", LMIC.netid );
        txOn = true;
        break;
    // scheduled data sent (optionally data received)
    case EV_TXCOMPLETE:
        debug_val( "Datarate = ", LMIC.datarate );
        // Check if we have a downlink on either Rx1 or Rx2 windows
        if( ( LMIC.txrxFlags & ( TXRX_DNW1 | TXRX_DNW2 ) ) != 0 )
        {
            debug_val( "LED2 = ", 1 );
            os_setTimedCallback( &rxLedJob, os_getTime( ) + ms2osticks( 25 ), onRxLed );

            if( LMIC.dataLen != 0 )
            { // data received in rx slot after tx
                debug_buf( LMIC.frame + LMIC.dataBeg, LMIC.dataLen );
                processRxFrame( );
            }
        }
        txOn = true;
        break;
    default:
        break;
    }
    myled = 1;      // turn the LED off
    if( txOn == true )
    {
        //Sends frame every APP_TX_DUTYCYCLE +/- APP_TX_DUTYCYCLE_RND random time (if not duty cycle limited)
        os_setTimedCallback( &sendFrameJob,
                             os_getTime( ) + ms2osticks( ((APP_TX_DUTYCYCLE) + randr( 10000, 60000 ))*2 ),
                             onSendFrame );
        myled = !myled;      // turn the LED on
        ////Sends frame as soon as possible (duty cylce limitations)
        //onSendFrame( NULL );
    }
}