mi mi / SDFileSystemDMA Featured

first 2016/02 SDFileSystemDMA inherited from Official SDFileSystem.

Dependents:   SDFileSystemDMA-test DmdFullRGB_0_1

Fork of SDFileSystemDMA by mi mi

SDFileSystemDMA is enhanced SDFileSystem library for STM32 micros by using DMA functionality.
Max read transfer rate reaches over 2MByte/sec at 24MHz SPI clock if enough read buffer size is set.
Even though minimum read buffer size (512Byte) is set, read transfer rate will reach over 1MByte/sec at 24MHz SPI Clock.
( but depends on the ability of each SD card)

Test program is here.
https://developer.mbed.org/users/mimi3/code/SDFileSystemDMA-test/

/media/uploads/mimi3/sdfilesystemdma-speed-test3-read-buffer-512byte.png

/media/uploads/mimi3/sdfilesystemdma-speed-test-buffer-vs-spi-clock-nucleo-f411re-96mhz.png

Supported SPI port is shown below table.

(v): Verified. It works well.
(w): Probably it will work well. (not tested)
(c): Only compiled. (not tested)
(f): Over flash.
(r): Only read mode. (when _FS_READONLY==1)
(u) Under construction
(z): Dose not work.

Caution

If your board has SRAM less than or equal to 8KB, the buffer size must be set to 512 Bytes.

Supported Boards:
Cortex-M0

BoardSRAMSPI1SPI2SPI3
NUCLEO-F030R88KB(v)
DISCO-F051R88KB(w)
NUCLEO-F031K64KB(f)
NUCLEO-F042K66KB(r)
NUCLEO-F070RB16KB(w)
NUCLEO-F072RB16KB(w)
NUCLEO-F091RC32KB(c)

Cortex-L0

BoardSRAMSPI1SPI2SPI3
DISCO-L053C88KB(c)
NUCLEO-L053R88KB(c)
NUCLEO-L073RZ20KB(c)

Cortex-M3

BoardSRAMSPI1SPI2SPI3
DISCO-F100RB8KB(v)(v)-
BLUEPILL-F103CB20KB(w)(w)-
NUCLEO-F103RB20KB(v)(v)-
NUCLEO-L152RE80KB(v)(w)-
MOTE-L152RC32KB(w)(w)-

Cortex-M4
F3

BoardSRAMSPI1SPI2SPI3
DISCO-F303VC40KB-(v)(v)
NUCLEO-F303RE64KB(w)(w)(w)
NUCLEO-F302R816KB--(c)
NUCLEO-F303K812KB(c)--
DISCO-F334C812KB(c)--
NUCLEO-F334R812KB(c)--

F4

BoardSPI1SPI2SPI3
ELMO-F411RE(w)-(w)
MTS-MDOT-F411RE(u)-(u)
MTS-DRAGONFLY-F411RE(w)-(w)
NUCLEO-F411RE(v)-(v)
NUCLEO-F401RE(w)-(w)
MTS-MDOT-F405RG(u)-(u)
NUCLEO-F410RB(c)-(c)
NUCLEO-F446RE(c)-(c)
NUCLEO-F429ZI(c)-(c)
B96B-F446VE(c)-(c)
NUCLEO-F446ZE(c)-(c)
DISCO-F429ZI(u)-(u)
DISCO-F469NI(c)-(c)

Information

This library is set to use "short file name" in SDFileSystemDMA/FATFileSystem/ChaN/ffconf.h . ( _USE_LFN=0)
You can change this option to _USE_LFN=1 .

SDFileSystemDMA.h@3:23e0dcc750fe, 2016-02-13 (annotated)

Committer:
mimi3
Date:
Sat Feb 13 22:03:36 2016 +0900
Revision:
3:23e0dcc750fe
Parent:
2:0e871408d51b
Child:
21:41129109d6ab
Quiet warning ?

Who changed what in which revision?

UserRevisionLine numberNew contents of line
mimi3 0:853a612ffb16 1 /* mbed Microcontroller Library
mimi3 0:853a612ffb16 2 * Copyright (c) 2006-2012 ARM Limited
mimi3 0:853a612ffb16 3 *
mimi3 0:853a612ffb16 4 * Permission is hereby granted, free of charge, to any person obtaining a copy
mimi3 0:853a612ffb16 5 * of this software and associated documentation files (the "Software"), to deal
mimi3 0:853a612ffb16 6 * in the Software without restriction, including without limitation the rights
mimi3 0:853a612ffb16 7 * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
mimi3 0:853a612ffb16 8 * copies of the Software, and to permit persons to whom the Software is
mimi3 0:853a612ffb16 9 * furnished to do so, subject to the following conditions:
mimi3 0:853a612ffb16 10 *
mimi3 0:853a612ffb16 11 * The above copyright notice and this permission notice shall be included in
mimi3 0:853a612ffb16 12 * all copies or substantial portions of the Software.
mimi3 0:853a612ffb16 13 *
mimi3 0:853a612ffb16 14 * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
mimi3 0:853a612ffb16 15 * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
mimi3 0:853a612ffb16 16 * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
mimi3 0:853a612ffb16 17 * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
mimi3 0:853a612ffb16 18 * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
mimi3 0:853a612ffb16 19 * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
mimi3 0:853a612ffb16 20 * SOFTWARE.
mimi3 0:853a612ffb16 21 */
mimi3 0:853a612ffb16 22 #ifndef MBED_SDFILESYSTEM_H
mimi3 0:853a612ffb16 23 #define MBED_SDFILESYSTEM_H
mimi3 0:853a612ffb16 24
mimi3 0:853a612ffb16 25 #include "mbed.h"
mimi3 0:853a612ffb16 26 #include "FATFileSystem.h"
mimi3 0:853a612ffb16 27 #include <stdint.h>
mimi3 0:853a612ffb16 28
mimi3 0:853a612ffb16 29 /** Access the filesystem on an SD Card using SPI
mimi3 0:853a612ffb16 30 *
mimi3 0:853a612ffb16 31 * @code
mimi3 0:853a612ffb16 32 * #include "mbed.h"
mimi3 0:853a612ffb16 33 * #include "SDFileSystem.h"
mimi3 0:853a612ffb16 34 *
mimi3 0:853a612ffb16 35 * SDFileSystem sd(p5, p6, p7, p12, "sd"); // mosi, miso, sclk, cs
mimi3 0:853a612ffb16 36 *
mimi3 0:853a612ffb16 37 * int main() {
mimi3 0:853a612ffb16 38 * FILE *fp = fopen("/sd/myfile.txt", "w");
mimi3 0:853a612ffb16 39 * fprintf(fp, "Hello World!\n");
mimi3 0:853a612ffb16 40 * fclose(fp);
mimi3 0:853a612ffb16 41 * }
mimi3 0:853a612ffb16 42 */
mimi3 0:853a612ffb16 43 class SDFileSystem : public FATFileSystem {
mimi3 0:853a612ffb16 44 public:
mimi3 0:853a612ffb16 45
mimi3 0:853a612ffb16 46 /** Create the File System for accessing an SD Card using SPI
mimi3 0:853a612ffb16 47 *
mimi3 0:853a612ffb16 48 * @param mosi SPI mosi pin connected to SD Card
mimi3 0:853a612ffb16 49 * @param miso SPI miso pin conencted to SD Card
mimi3 0:853a612ffb16 50 * @param sclk SPI sclk pin connected to SD Card
mimi3 0:853a612ffb16 51 * @param cs DigitalOut pin used as SD Card chip select
mimi3 0:853a612ffb16 52 * @param name The name used to access the virtual filesystem
mimi3 0:853a612ffb16 53 */
mimi3 3:23e0dcc750fe 54 SDFileSystem(PinName mosi, PinName miso, PinName sclk, PinName cs, const char* name, uint32_t hz = (6*1000000));
mimi3 0:853a612ffb16 55 virtual int disk_initialize();
mimi3 0:853a612ffb16 56 virtual int disk_status();
mimi3 0:853a612ffb16 57 virtual int disk_read(uint8_t* buffer, uint32_t block_number, uint32_t count);
mimi3 0:853a612ffb16 58 virtual int disk_write(const uint8_t* buffer, uint32_t block_number, uint32_t count);
mimi3 0:853a612ffb16 59 virtual int disk_sync();
mimi3 0:853a612ffb16 60 virtual uint32_t disk_sectors();
mimi3 0:853a612ffb16 61
mimi3 0:853a612ffb16 62 protected:
mimi3 0:853a612ffb16 63
mimi3 0:853a612ffb16 64 int _cmd(int cmd, int arg);
mimi3 0:853a612ffb16 65 int _cmdx(int cmd, int arg);
mimi3 0:853a612ffb16 66 int _cmd8();
mimi3 0:853a612ffb16 67 int _cmd58();
mimi3 0:853a612ffb16 68 int initialise_card();
mimi3 0:853a612ffb16 69 int initialise_card_v1();
mimi3 0:853a612ffb16 70 int initialise_card_v2();
mimi3 0:853a612ffb16 71
mimi3 0:853a612ffb16 72 int _read(uint8_t * buffer, uint32_t length);
mimi3 0:853a612ffb16 73 int _write(const uint8_t *buffer, uint32_t length);
mimi3 0:853a612ffb16 74 uint32_t _sd_sectors();
mimi3 0:853a612ffb16 75 uint32_t _sectors;
mimi3 0:853a612ffb16 76
mimi3 0:853a612ffb16 77 void set_init_sck(uint32_t sck) { _init_sck = sck; }
mimi3 0:853a612ffb16 78 // Note: The highest SPI clock rate is 20 MHz for MMC and 25 MHz for SD
mimi3 0:853a612ffb16 79 void set_transfer_sck(uint32_t sck) { _transfer_sck = sck; }
mimi3 0:853a612ffb16 80 uint32_t _init_sck;
mimi3 0:853a612ffb16 81
mimi3 0:853a612ffb16 82 SPI _spi;
mimi3 0:853a612ffb16 83 DigitalOut _cs;
mimi3 0:853a612ffb16 84 int cdv;
mimi3 0:853a612ffb16 85 int _is_initialized;
mimi3 3:23e0dcc750fe 86 uint32_t _transfer_sck;
mimi3 0:853a612ffb16 87 };
mimi3 0:853a612ffb16 88
mimi3 0:853a612ffb16 89 #endif