Diff: TARGET_LPC54114/TOOLCHAIN_ARM_STD/PinNames.h

Revision:

171:3a7713b1edbc

Parent:

148:fd96258d940d

diff -r e95d10626187 -r 3a7713b1edbc TARGET_LPC54114/TOOLCHAIN_ARM_STD/PinNames.h
--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/TARGET_LPC54114/TOOLCHAIN_ARM_STD/PinNames.h	Thu Nov 08 11:45:42 2018 +0000
@@ -0,0 +1,146 @@
+/* mbed Microcontroller Library
+ * Copyright (c) 2006-2013 ARM Limited
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *     http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+#ifndef MBED_PINNAMES_H
+#define MBED_PINNAMES_H
+
+#include "cmsis.h"
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+typedef enum {
+    PIN_INPUT,
+    PIN_OUTPUT
+} PinDirection;
+
+#define PORT_SHIFT  5
+
+typedef enum {
+    P0_0 = 0,
+    P0_1 = 1,
+    P0_2 = 2,
+    P0_3 = 3,
+    P0_4 = 4,
+    P0_5 = 5,
+    P0_6 = 6,
+    P0_7 = 7,
+    P0_8 = 8,
+    P0_9 = 9,
+    P0_10 = 10,
+    P0_11 = 11,
+    P0_12 = 12,
+    P0_13 = 13,
+    P0_14 = 14,
+    P0_15 = 15,
+    P0_16 = 16,
+    P0_17 = 17,
+    P0_18 = 18,
+    P0_19 = 19,
+    P0_20 = 20,
+    P0_21 = 21,
+    P0_22 = 22,
+    P0_23 = 23,
+    P0_24 = 24,
+    P0_25 = 25,
+    P0_26 = 26,
+    P0_29 = 29,
+    P0_30 = 30,
+    P0_31 = 31,
+
+    P1_0 = 32,
+    P1_1 = 33,
+    P1_2 = 34,
+    P1_3 = 35,
+    P1_4 = 36,
+    P1_5 = 37,
+    P1_6 = 38,
+    P1_7 = 39,
+    P1_8 = 40,
+    P1_9 = 41,
+    P1_10 = 42,
+    P1_11 = 43,
+    P1_12 = 44,
+    P1_13 = 45,
+    P1_14 = 46,
+    P1_15 = 47,
+    P1_16 = 48,
+    P1_17 = 49,
+
+    LED_RED   = P0_29,
+    LED_GREEN = P1_10,
+    LED_BLUE  = P1_9,
+
+    // mbed original LED naming
+    LED1 = LED_RED,
+    LED2 = LED_GREEN,
+    LED3 = LED_BLUE,
+    LED4 = LED_RED,
+
+    //Push buttons
+    SW1 = P0_24,
+    SW2 = P0_31,
+    SW3 = P0_4,
+
+    // USB Pins
+    USBTX = P0_1,
+    USBRX = P0_0,
+
+    // Arduino Headers
+    D0 = P0_8,
+    D1 = P0_9,
+    D2 = P0_10,
+    D3 = P1_12,
+    D4 = P1_13,
+    D5 = P0_29,
+    D6 = P1_0,
+    D7 = P1_14,
+    D8 = P1_16,
+    D9 = P1_15,
+    D10 = P1_1,
+    D11 = P0_20,
+    D12 = P0_18,
+    D13 = P0_19,
+    D14 = P0_26,
+    D15 = P0_25,
+
+    I2C_SCL = D15,
+    I2C_SDA = D14,
+
+    // Not connected
+    NC = (int)0xFFFFFFFF,
+
+    A0 = P0_30,
+    A1 = NC,
+    A2 = P1_8,
+    A3 = P1_10,
+    A4 = P1_4,
+    A5 = P1_5
+} PinName;
+
+
+typedef enum {
+    PullNone = 0,
+    PullDown = 1,
+    PullUp   = 2,
+    PullDefault = PullUp
+} PinMode;
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif