File content as of revision 154:fb8e0ae1cceb:

/* mbed Microcontroller Library
 * Copyright (c) 2013 Nordic Semiconductor
 *
 * Licensed under the Apache License, Version 2.0 (the "License");
 * you may not use this file except in compliance with the License.
 * You may obtain a copy of the License at
 *
 *     http://www.apache.org/licenses/LICENSE-2.0
 *
 * Unless required by applicable law or agreed to in writing, software
 * distributed under the License is distributed on an "AS IS" BASIS,
 * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
 * See the License for the specific language governing permissions and
 * limitations under the License.
 */
#ifndef MBED_PINNAMES_H
#define MBED_PINNAMES_H

#include "cmsis.h"

#ifdef __cplusplus
extern "C" {
#endif

typedef enum {
    PIN_INPUT,
    PIN_OUTPUT
} PinDirection;

#define PORT_SHIFT  3

typedef enum {
    //MCU PINS
    P0_0  = 0,
    P0_1  = 1,
    P0_2  = 2,
    P0_3  = 3,
    P0_4  = 4,
    P0_5  = 5,
    P0_6  = 6,
    P0_7  = 7,
    P0_8  = 8,
    P0_9  = 9,
    P0_10 = 10,
    P0_11 = 11,
    P0_12 = 12,
    P0_13 = 13,
    P0_14 = 14,
    P0_15 = 15,
    P0_16 = 16,
    P0_17 = 17,
    P0_18 = 18,
    P0_19 = 19,
    P0_20 = 20,
    P0_21 = 21,
    P0_22 = 22,
    P0_23 = 23,
    P0_24 = 24,
    P0_25 = 25,
    P0_26 = 26,
    P0_27 = 27,
    P0_28 = 28,
    P0_29 = 29,
    P0_30 = 30,  
   
    //MICROBIT EDGE CONNECTOR PINS
    P0  = P0_3,
    P1  = P0_2,
    P2  = P0_1,
    P3  = P0_4,
    P4  = P0_5,
    P5  = P0_17,
    P6  = P0_12,
    P7  = P0_11,
    P8  = P0_18,
    P9  = P0_10,
    P10 = P0_6,
    P11 = P0_26,
    P12 = P0_20,
    P13 = P0_23,
    P14 = P0_22,
    P15 = P0_21,
    P16 = P0_16,
    P19 = P0_0,
    P20 = P0_30,
 
    //PADS
    PAD3 = P0_1,
    PAD2 = P0_2,
    PAD1 = P0_3,
    

    //LED MATRIX COLS
    COL1 = P0_4,
    COL2 = P0_5,
    COL3 = P0_6,
    COL4 = P0_7,
    COL5 = P0_8,
    COL6 = P0_9,
    COL7 = P0_10,
    COL8 = P0_11,
    COL9 = P0_12,

    //LED MATRIX ROWS
    ROW1 = P0_13,
    ROW2 = P0_14,
    ROW3 = P0_15,

    //NORMAL PIN (NO SPECIFIED FUNCTIONALITY)
    //PIN_16

    // BUTTON A
    BUTTON_A = P0_17,
    

    //NORMAL PIN (NO SPECIFIED FUNCTIONALITY)
    //PIN_18
    
    //TARGET RESET
    TGT_NRESET = P0_19,

    //NORMAL PIN (NO SPECIFIED FUNCTIONALITY)
    //PIN_20

    //MASTER OUT SLAVE IN
    MOSI = P0_21,
    
    //MASTER IN SLAVE OUT
    MISO = P0_22,

    //SERIAL CLOCK
    SCK = P0_23,

    // RX AND TX PINS
    TGT_TX = P0_24,
    TGT_RX = P0_25,

    //BUTTON B
    BUTTON_B = P0_26,
    
    //ACCEL INTERRUPT PINS (MMA8653FC)
    ACCEL_INT2 = P0_27,
    ACCEL_INT1 = P0_28,

    //MAGENETOMETER INTERRUPT PIN (MAG3110)
    MAG_INT1 = P0_29,

    // Not connected
    NC = (int)0xFFFFFFFF,

    RX_PIN_NUMBER = TGT_RX,
    TX_PIN_NUMBER = TGT_TX,
    CTS_PIN_NUMBER = 31, //unused  ** REQUIRES A PROPER FIX **
    RTS_PIN_NUMBER = 31, //unused 

    // mBed interface Pins
    USBTX = TX_PIN_NUMBER,
    USBRX = RX_PIN_NUMBER,

    LED1    = PAD1,
    LED2    = PAD2,
    LED3    = PAD3,
    LED4    = P0_16,

    //SDA (SERIAL DATA LINE)
    I2C_SDA0 = P0_30,

    //SCL (SERIAL CLOCK LINE)
    I2C_SCL0 = P0_0

} PinName;

typedef enum {
    PullNone = 0,
    PullDown = 1,
    PullUp = 3,
    PullDefault = PullUp
} PinMode;

#ifdef __cplusplus
}
#endif

#endif