File content as of revision 104:b9ad9a133dc7:

/*
** ###################################################################
**     Compilers:           Keil ARM C/C++ Compiler
**                          Freescale C/C++ for Embedded ARM
**                          GNU C Compiler
**                          IAR ANSI C/C++ Compiler for ARM
**
**     Reference manual:    K64P144M120SF5RM, Rev.2, January 2014
**     Version:             rev. 2.5, 2014-02-10
**     Build:               b140604
**
**     Abstract:
**         Extension to the CMSIS register access layer header.
**
**     Copyright (c) 2014 Freescale Semiconductor, Inc.
**     All rights reserved.
**
**     Redistribution and use in source and binary forms, with or without modification,
**     are permitted provided that the following conditions are met:
**
**     o Redistributions of source code must retain the above copyright notice, this list
**       of conditions and the following disclaimer.
**
**     o Redistributions in binary form must reproduce the above copyright notice, this
**       list of conditions and the following disclaimer in the documentation and/or
**       other materials provided with the distribution.
**
**     o Neither the name of Freescale Semiconductor, Inc. nor the names of its
**       contributors may be used to endorse or promote products derived from this
**       software without specific prior written permission.
**
**     THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
**     ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
**     WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
**     DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE FOR
**     ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
**     (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
**     LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
**     ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
**     (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
**     SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
**
**     http:                 www.freescale.com
**     mail:                 support@freescale.com
**
**     Revisions:
**     - rev. 1.0 (2013-08-12)
**         Initial version.
**     - rev. 2.0 (2013-10-29)
**         Register accessor macros added to the memory map.
**         Symbols for Processor Expert memory map compatibility added to the memory map.
**         Startup file for gcc has been updated according to CMSIS 3.2.
**         System initialization updated.
**         MCG - registers updated.
**         PORTA, PORTB, PORTC, PORTE - registers for digital filter removed.
**     - rev. 2.1 (2013-10-30)
**         Definition of BITBAND macros updated to support peripherals with 32-bit acces disabled.
**     - rev. 2.2 (2013-12-09)
**         DMA - EARS register removed.
**         AIPS0, AIPS1 - MPRA register updated.
**     - rev. 2.3 (2014-01-24)
**         Update according to reference manual rev. 2
**         ENET, MCG, MCM, SIM, USB - registers updated
**     - rev. 2.4 (2014-02-10)
**         The declaration of clock configurations has been moved to separate header file system_MK64F12.h
**         Update of SystemInit() and SystemCoreClockUpdate() functions.
**     - rev. 2.5 (2014-02-10)
**         The declaration of clock configurations has been moved to separate header file system_MK64F12.h
**         Update of SystemInit() and SystemCoreClockUpdate() functions.
**         Module access macro module_BASES replaced by module_BASE_PTRS.
**
** ###################################################################
*/

/*
 * WARNING! DO NOT EDIT THIS FILE DIRECTLY!
 *
 * This file was generated automatically and any changes may be lost.
 */
#ifndef __HW_CMP_REGISTERS_H__
#define __HW_CMP_REGISTERS_H__

#include "MK64F12.h"
#include "fsl_bitaccess.h"

/*
 * MK64F12 CMP
 *
 * High-Speed Comparator (CMP), Voltage Reference (VREF) Digital-to-Analog Converter (DAC), and Analog Mux (ANMUX)
 *
 * Registers defined in this header file:
 * - HW_CMP_CR0 - CMP Control Register 0
 * - HW_CMP_CR1 - CMP Control Register 1
 * - HW_CMP_FPR - CMP Filter Period Register
 * - HW_CMP_SCR - CMP Status and Control Register
 * - HW_CMP_DACCR - DAC Control Register
 * - HW_CMP_MUXCR - MUX Control Register
 *
 * - hw_cmp_t - Struct containing all module registers.
 */

#define HW_CMP_INSTANCE_COUNT (3U) /*!< Number of instances of the CMP module. */
#define HW_CMP0 (0U) /*!< Instance number for CMP0. */
#define HW_CMP1 (1U) /*!< Instance number for CMP1. */
#define HW_CMP2 (2U) /*!< Instance number for CMP2. */

/*******************************************************************************
 * HW_CMP_CR0 - CMP Control Register 0
 ******************************************************************************/

/*!
 * @brief HW_CMP_CR0 - CMP Control Register 0 (RW)
 *
 * Reset value: 0x00U
 */
typedef union _hw_cmp_cr0
{
    uint8_t U;
    struct _hw_cmp_cr0_bitfields
    {
        uint8_t HYSTCTR : 2;           /*!< [1:0] Comparator hard block hysteresis
                                        * control */
        uint8_t RESERVED0 : 2;         /*!< [3:2]  */
        uint8_t FILTER_CNT : 3;        /*!< [6:4] Filter Sample Count */
        uint8_t RESERVED1 : 1;         /*!< [7]  */
    } B;
} hw_cmp_cr0_t;

/*!
 * @name Constants and macros for entire CMP_CR0 register
 */
/*@{*/
#define HW_CMP_CR0_ADDR(x)       ((x) + 0x0U)

#define HW_CMP_CR0(x)            (*(__IO hw_cmp_cr0_t *) HW_CMP_CR0_ADDR(x))
#define HW_CMP_CR0_RD(x)         (HW_CMP_CR0(x).U)
#define HW_CMP_CR0_WR(x, v)      (HW_CMP_CR0(x).U = (v))
#define HW_CMP_CR0_SET(x, v)     (HW_CMP_CR0_WR(x, HW_CMP_CR0_RD(x) |  (v)))
#define HW_CMP_CR0_CLR(x, v)     (HW_CMP_CR0_WR(x, HW_CMP_CR0_RD(x) & ~(v)))
#define HW_CMP_CR0_TOG(x, v)     (HW_CMP_CR0_WR(x, HW_CMP_CR0_RD(x) ^  (v)))
/*@}*/

/*
 * Constants & macros for individual CMP_CR0 bitfields
 */

/*!
 * @name Register CMP_CR0, field HYSTCTR[1:0] (RW)
 *
 * Defines the programmable hysteresis level. The hysteresis values associated
 * with each level are device-specific. See the Data Sheet of the device for the
 * exact values.
 *
 * Values:
 * - 00 - Level 0
 * - 01 - Level 1
 * - 10 - Level 2
 * - 11 - Level 3
 */
/*@{*/
#define BP_CMP_CR0_HYSTCTR   (0U)          /*!< Bit position for CMP_CR0_HYSTCTR. */
#define BM_CMP_CR0_HYSTCTR   (0x03U)       /*!< Bit mask for CMP_CR0_HYSTCTR. */
#define BS_CMP_CR0_HYSTCTR   (2U)          /*!< Bit field size in bits for CMP_CR0_HYSTCTR. */

/*! @brief Read current value of the CMP_CR0_HYSTCTR field. */
#define BR_CMP_CR0_HYSTCTR(x) (HW_CMP_CR0(x).B.HYSTCTR)

/*! @brief Format value for bitfield CMP_CR0_HYSTCTR. */
#define BF_CMP_CR0_HYSTCTR(v) ((uint8_t)((uint8_t)(v) << BP_CMP_CR0_HYSTCTR) & BM_CMP_CR0_HYSTCTR)

/*! @brief Set the HYSTCTR field to a new value. */
#define BW_CMP_CR0_HYSTCTR(x, v) (HW_CMP_CR0_WR(x, (HW_CMP_CR0_RD(x) & ~BM_CMP_CR0_HYSTCTR) | BF_CMP_CR0_HYSTCTR(v)))
/*@}*/

/*!
 * @name Register CMP_CR0, field FILTER_CNT[6:4] (RW)
 *
 * Represents the number of consecutive samples that must agree prior to the
 * comparator ouput filter accepting a new output state. For information regarding
 * filter programming and latency, see the Functional descriptionThe CMP module
 * can be used to compare two analog input voltages applied to INP and INM. .
 *
 * Values:
 * - 000 - Filter is disabled. If SE = 1, then COUT is a logic 0. This is not a
 *     legal state, and is not recommended. If SE = 0, COUT = COUTA.
 * - 001 - One sample must agree. The comparator output is simply sampled.
 * - 010 - 2 consecutive samples must agree.
 * - 011 - 3 consecutive samples must agree.
 * - 100 - 4 consecutive samples must agree.
 * - 101 - 5 consecutive samples must agree.
 * - 110 - 6 consecutive samples must agree.
 * - 111 - 7 consecutive samples must agree.
 */
/*@{*/
#define BP_CMP_CR0_FILTER_CNT (4U)         /*!< Bit position for CMP_CR0_FILTER_CNT. */
#define BM_CMP_CR0_FILTER_CNT (0x70U)      /*!< Bit mask for CMP_CR0_FILTER_CNT. */
#define BS_CMP_CR0_FILTER_CNT (3U)         /*!< Bit field size in bits for CMP_CR0_FILTER_CNT. */

/*! @brief Read current value of the CMP_CR0_FILTER_CNT field. */
#define BR_CMP_CR0_FILTER_CNT(x) (HW_CMP_CR0(x).B.FILTER_CNT)

/*! @brief Format value for bitfield CMP_CR0_FILTER_CNT. */
#define BF_CMP_CR0_FILTER_CNT(v) ((uint8_t)((uint8_t)(v) << BP_CMP_CR0_FILTER_CNT) & BM_CMP_CR0_FILTER_CNT)

/*! @brief Set the FILTER_CNT field to a new value. */
#define BW_CMP_CR0_FILTER_CNT(x, v) (HW_CMP_CR0_WR(x, (HW_CMP_CR0_RD(x) & ~BM_CMP_CR0_FILTER_CNT) | BF_CMP_CR0_FILTER_CNT(v)))
/*@}*/

/*******************************************************************************
 * HW_CMP_CR1 - CMP Control Register 1
 ******************************************************************************/

/*!
 * @brief HW_CMP_CR1 - CMP Control Register 1 (RW)
 *
 * Reset value: 0x00U
 */
typedef union _hw_cmp_cr1
{
    uint8_t U;
    struct _hw_cmp_cr1_bitfields
    {
        uint8_t EN : 1;                /*!< [0] Comparator Module Enable */
        uint8_t OPE : 1;               /*!< [1] Comparator Output Pin Enable */
        uint8_t COS : 1;               /*!< [2] Comparator Output Select */
        uint8_t INV : 1;               /*!< [3] Comparator INVERT */
        uint8_t PMODE : 1;             /*!< [4] Power Mode Select */
        uint8_t RESERVED0 : 1;         /*!< [5]  */
        uint8_t WE : 1;                /*!< [6] Windowing Enable */
        uint8_t SE : 1;                /*!< [7] Sample Enable */
    } B;
} hw_cmp_cr1_t;

/*!
 * @name Constants and macros for entire CMP_CR1 register
 */
/*@{*/
#define HW_CMP_CR1_ADDR(x)       ((x) + 0x1U)

#define HW_CMP_CR1(x)            (*(__IO hw_cmp_cr1_t *) HW_CMP_CR1_ADDR(x))
#define HW_CMP_CR1_RD(x)         (HW_CMP_CR1(x).U)
#define HW_CMP_CR1_WR(x, v)      (HW_CMP_CR1(x).U = (v))
#define HW_CMP_CR1_SET(x, v)     (HW_CMP_CR1_WR(x, HW_CMP_CR1_RD(x) |  (v)))
#define HW_CMP_CR1_CLR(x, v)     (HW_CMP_CR1_WR(x, HW_CMP_CR1_RD(x) & ~(v)))
#define HW_CMP_CR1_TOG(x, v)     (HW_CMP_CR1_WR(x, HW_CMP_CR1_RD(x) ^  (v)))
/*@}*/

/*
 * Constants & macros for individual CMP_CR1 bitfields
 */

/*!
 * @name Register CMP_CR1, field EN[0] (RW)
 *
 * Enables the Analog Comparator module. When the module is not enabled, it
 * remains in the off state, and consumes no power. When the user selects the same
 * input from analog mux to the positive and negative port, the comparator is
 * disabled automatically.
 *
 * Values:
 * - 0 - Analog Comparator is disabled.
 * - 1 - Analog Comparator is enabled.
 */
/*@{*/
#define BP_CMP_CR1_EN        (0U)          /*!< Bit position for CMP_CR1_EN. */
#define BM_CMP_CR1_EN        (0x01U)       /*!< Bit mask for CMP_CR1_EN. */
#define BS_CMP_CR1_EN        (1U)          /*!< Bit field size in bits for CMP_CR1_EN. */

/*! @brief Read current value of the CMP_CR1_EN field. */
#define BR_CMP_CR1_EN(x)     (BITBAND_ACCESS8(HW_CMP_CR1_ADDR(x), BP_CMP_CR1_EN))

/*! @brief Format value for bitfield CMP_CR1_EN. */
#define BF_CMP_CR1_EN(v)     ((uint8_t)((uint8_t)(v) << BP_CMP_CR1_EN) & BM_CMP_CR1_EN)

/*! @brief Set the EN field to a new value. */
#define BW_CMP_CR1_EN(x, v)  (BITBAND_ACCESS8(HW_CMP_CR1_ADDR(x), BP_CMP_CR1_EN) = (v))
/*@}*/

/*!
 * @name Register CMP_CR1, field OPE[1] (RW)
 *
 * Values:
 * - 0 - CMPO is not available on the associated CMPO output pin. If the
 *     comparator does not own the pin, this field has no effect.
 * - 1 - CMPO is available on the associated CMPO output pin. The comparator
 *     output (CMPO) is driven out on the associated CMPO output pin if the
 *     comparator owns the pin. If the comparator does not own the field, this bit has no
 *     effect.
 */
/*@{*/
#define BP_CMP_CR1_OPE       (1U)          /*!< Bit position for CMP_CR1_OPE. */
#define BM_CMP_CR1_OPE       (0x02U)       /*!< Bit mask for CMP_CR1_OPE. */
#define BS_CMP_CR1_OPE       (1U)          /*!< Bit field size in bits for CMP_CR1_OPE. */

/*! @brief Read current value of the CMP_CR1_OPE field. */
#define BR_CMP_CR1_OPE(x)    (BITBAND_ACCESS8(HW_CMP_CR1_ADDR(x), BP_CMP_CR1_OPE))

/*! @brief Format value for bitfield CMP_CR1_OPE. */
#define BF_CMP_CR1_OPE(v)    ((uint8_t)((uint8_t)(v) << BP_CMP_CR1_OPE) & BM_CMP_CR1_OPE)

/*! @brief Set the OPE field to a new value. */
#define BW_CMP_CR1_OPE(x, v) (BITBAND_ACCESS8(HW_CMP_CR1_ADDR(x), BP_CMP_CR1_OPE) = (v))
/*@}*/

/*!
 * @name Register CMP_CR1, field COS[2] (RW)
 *
 * Values:
 * - 0 - Set the filtered comparator output (CMPO) to equal COUT.
 * - 1 - Set the unfiltered comparator output (CMPO) to equal COUTA.
 */
/*@{*/
#define BP_CMP_CR1_COS       (2U)          /*!< Bit position for CMP_CR1_COS. */
#define BM_CMP_CR1_COS       (0x04U)       /*!< Bit mask for CMP_CR1_COS. */
#define BS_CMP_CR1_COS       (1U)          /*!< Bit field size in bits for CMP_CR1_COS. */

/*! @brief Read current value of the CMP_CR1_COS field. */
#define BR_CMP_CR1_COS(x)    (BITBAND_ACCESS8(HW_CMP_CR1_ADDR(x), BP_CMP_CR1_COS))

/*! @brief Format value for bitfield CMP_CR1_COS. */
#define BF_CMP_CR1_COS(v)    ((uint8_t)((uint8_t)(v) << BP_CMP_CR1_COS) & BM_CMP_CR1_COS)

/*! @brief Set the COS field to a new value. */
#define BW_CMP_CR1_COS(x, v) (BITBAND_ACCESS8(HW_CMP_CR1_ADDR(x), BP_CMP_CR1_COS) = (v))
/*@}*/

/*!
 * @name Register CMP_CR1, field INV[3] (RW)
 *
 * Allows selection of the polarity of the analog comparator function. It is
 * also driven to the COUT output, on both the device pin and as SCR[COUT], when
 * OPE=0.
 *
 * Values:
 * - 0 - Does not invert the comparator output.
 * - 1 - Inverts the comparator output.
 */
/*@{*/
#define BP_CMP_CR1_INV       (3U)          /*!< Bit position for CMP_CR1_INV. */
#define BM_CMP_CR1_INV       (0x08U)       /*!< Bit mask for CMP_CR1_INV. */
#define BS_CMP_CR1_INV       (1U)          /*!< Bit field size in bits for CMP_CR1_INV. */

/*! @brief Read current value of the CMP_CR1_INV field. */
#define BR_CMP_CR1_INV(x)    (BITBAND_ACCESS8(HW_CMP_CR1_ADDR(x), BP_CMP_CR1_INV))

/*! @brief Format value for bitfield CMP_CR1_INV. */
#define BF_CMP_CR1_INV(v)    ((uint8_t)((uint8_t)(v) << BP_CMP_CR1_INV) & BM_CMP_CR1_INV)

/*! @brief Set the INV field to a new value. */
#define BW_CMP_CR1_INV(x, v) (BITBAND_ACCESS8(HW_CMP_CR1_ADDR(x), BP_CMP_CR1_INV) = (v))
/*@}*/

/*!
 * @name Register CMP_CR1, field PMODE[4] (RW)
 *
 * See the electrical specifications table in the device Data Sheet for details.
 *
 * Values:
 * - 0 - Low-Speed (LS) Comparison mode selected. In this mode, CMP has slower
 *     output propagation delay and lower current consumption.
 * - 1 - High-Speed (HS) Comparison mode selected. In this mode, CMP has faster
 *     output propagation delay and higher current consumption.
 */
/*@{*/
#define BP_CMP_CR1_PMODE     (4U)          /*!< Bit position for CMP_CR1_PMODE. */
#define BM_CMP_CR1_PMODE     (0x10U)       /*!< Bit mask for CMP_CR1_PMODE. */
#define BS_CMP_CR1_PMODE     (1U)          /*!< Bit field size in bits for CMP_CR1_PMODE. */

/*! @brief Read current value of the CMP_CR1_PMODE field. */
#define BR_CMP_CR1_PMODE(x)  (BITBAND_ACCESS8(HW_CMP_CR1_ADDR(x), BP_CMP_CR1_PMODE))

/*! @brief Format value for bitfield CMP_CR1_PMODE. */
#define BF_CMP_CR1_PMODE(v)  ((uint8_t)((uint8_t)(v) << BP_CMP_CR1_PMODE) & BM_CMP_CR1_PMODE)

/*! @brief Set the PMODE field to a new value. */
#define BW_CMP_CR1_PMODE(x, v) (BITBAND_ACCESS8(HW_CMP_CR1_ADDR(x), BP_CMP_CR1_PMODE) = (v))
/*@}*/

/*!
 * @name Register CMP_CR1, field WE[6] (RW)
 *
 * At any given time, either SE or WE can be set. If a write to this register
 * attempts to set both, then SE is set and WE is cleared. However, avoid writing
 * 1s to both field locations because this "11" case is reserved and may change in
 * future implementations.
 *
 * Values:
 * - 0 - Windowing mode is not selected.
 * - 1 - Windowing mode is selected.
 */
/*@{*/
#define BP_CMP_CR1_WE        (6U)          /*!< Bit position for CMP_CR1_WE. */
#define BM_CMP_CR1_WE        (0x40U)       /*!< Bit mask for CMP_CR1_WE. */
#define BS_CMP_CR1_WE        (1U)          /*!< Bit field size in bits for CMP_CR1_WE. */

/*! @brief Read current value of the CMP_CR1_WE field. */
#define BR_CMP_CR1_WE(x)     (BITBAND_ACCESS8(HW_CMP_CR1_ADDR(x), BP_CMP_CR1_WE))

/*! @brief Format value for bitfield CMP_CR1_WE. */
#define BF_CMP_CR1_WE(v)     ((uint8_t)((uint8_t)(v) << BP_CMP_CR1_WE) & BM_CMP_CR1_WE)

/*! @brief Set the WE field to a new value. */
#define BW_CMP_CR1_WE(x, v)  (BITBAND_ACCESS8(HW_CMP_CR1_ADDR(x), BP_CMP_CR1_WE) = (v))
/*@}*/

/*!
 * @name Register CMP_CR1, field SE[7] (RW)
 *
 * At any given time, either SE or WE can be set. If a write to this register
 * attempts to set both, then SE is set and WE is cleared. However, avoid writing
 * 1s to both field locations because this "11" case is reserved and may change in
 * future implementations.
 *
 * Values:
 * - 0 - Sampling mode is not selected.
 * - 1 - Sampling mode is selected.
 */
/*@{*/
#define BP_CMP_CR1_SE        (7U)          /*!< Bit position for CMP_CR1_SE. */
#define BM_CMP_CR1_SE        (0x80U)       /*!< Bit mask for CMP_CR1_SE. */
#define BS_CMP_CR1_SE        (1U)          /*!< Bit field size in bits for CMP_CR1_SE. */

/*! @brief Read current value of the CMP_CR1_SE field. */
#define BR_CMP_CR1_SE(x)     (BITBAND_ACCESS8(HW_CMP_CR1_ADDR(x), BP_CMP_CR1_SE))

/*! @brief Format value for bitfield CMP_CR1_SE. */
#define BF_CMP_CR1_SE(v)     ((uint8_t)((uint8_t)(v) << BP_CMP_CR1_SE) & BM_CMP_CR1_SE)

/*! @brief Set the SE field to a new value. */
#define BW_CMP_CR1_SE(x, v)  (BITBAND_ACCESS8(HW_CMP_CR1_ADDR(x), BP_CMP_CR1_SE) = (v))
/*@}*/

/*******************************************************************************
 * HW_CMP_FPR - CMP Filter Period Register
 ******************************************************************************/

/*!
 * @brief HW_CMP_FPR - CMP Filter Period Register (RW)
 *
 * Reset value: 0x00U
 */
typedef union _hw_cmp_fpr
{
    uint8_t U;
    struct _hw_cmp_fpr_bitfields
    {
        uint8_t FILT_PER : 8;          /*!< [7:0] Filter Sample Period */
    } B;
} hw_cmp_fpr_t;

/*!
 * @name Constants and macros for entire CMP_FPR register
 */
/*@{*/
#define HW_CMP_FPR_ADDR(x)       ((x) + 0x2U)

#define HW_CMP_FPR(x)            (*(__IO hw_cmp_fpr_t *) HW_CMP_FPR_ADDR(x))
#define HW_CMP_FPR_RD(x)         (HW_CMP_FPR(x).U)
#define HW_CMP_FPR_WR(x, v)      (HW_CMP_FPR(x).U = (v))
#define HW_CMP_FPR_SET(x, v)     (HW_CMP_FPR_WR(x, HW_CMP_FPR_RD(x) |  (v)))
#define HW_CMP_FPR_CLR(x, v)     (HW_CMP_FPR_WR(x, HW_CMP_FPR_RD(x) & ~(v)))
#define HW_CMP_FPR_TOG(x, v)     (HW_CMP_FPR_WR(x, HW_CMP_FPR_RD(x) ^  (v)))
/*@}*/

/*
 * Constants & macros for individual CMP_FPR bitfields
 */

/*!
 * @name Register CMP_FPR, field FILT_PER[7:0] (RW)
 *
 * Specifies the sampling period, in bus clock cycles, of the comparator output
 * filter, when CR1[SE]=0. Setting FILT_PER to 0x0 disables the filter. Filter
 * programming and latency details appear in the Functional descriptionThe CMP
 * module can be used to compare two analog input voltages applied to INP and INM. .
 * This field has no effect when CR1[SE]=1. In that case, the external SAMPLE
 * signal is used to determine the sampling period.
 */
/*@{*/
#define BP_CMP_FPR_FILT_PER  (0U)          /*!< Bit position for CMP_FPR_FILT_PER. */
#define BM_CMP_FPR_FILT_PER  (0xFFU)       /*!< Bit mask for CMP_FPR_FILT_PER. */
#define BS_CMP_FPR_FILT_PER  (8U)          /*!< Bit field size in bits for CMP_FPR_FILT_PER. */

/*! @brief Read current value of the CMP_FPR_FILT_PER field. */
#define BR_CMP_FPR_FILT_PER(x) (HW_CMP_FPR(x).U)

/*! @brief Format value for bitfield CMP_FPR_FILT_PER. */
#define BF_CMP_FPR_FILT_PER(v) ((uint8_t)((uint8_t)(v) << BP_CMP_FPR_FILT_PER) & BM_CMP_FPR_FILT_PER)

/*! @brief Set the FILT_PER field to a new value. */
#define BW_CMP_FPR_FILT_PER(x, v) (HW_CMP_FPR_WR(x, v))
/*@}*/

/*******************************************************************************
 * HW_CMP_SCR - CMP Status and Control Register
 ******************************************************************************/

/*!
 * @brief HW_CMP_SCR - CMP Status and Control Register (RW)
 *
 * Reset value: 0x00U
 */
typedef union _hw_cmp_scr
{
    uint8_t U;
    struct _hw_cmp_scr_bitfields
    {
        uint8_t COUT : 1;              /*!< [0] Analog Comparator Output */
        uint8_t CFF : 1;               /*!< [1] Analog Comparator Flag Falling */
        uint8_t CFR : 1;               /*!< [2] Analog Comparator Flag Rising */
        uint8_t IEF : 1;               /*!< [3] Comparator Interrupt Enable Falling */
        uint8_t IER : 1;               /*!< [4] Comparator Interrupt Enable Rising */
        uint8_t RESERVED0 : 1;         /*!< [5]  */
        uint8_t DMAEN : 1;             /*!< [6] DMA Enable Control */
        uint8_t RESERVED1 : 1;         /*!< [7]  */
    } B;
} hw_cmp_scr_t;

/*!
 * @name Constants and macros for entire CMP_SCR register
 */
/*@{*/
#define HW_CMP_SCR_ADDR(x)       ((x) + 0x3U)

#define HW_CMP_SCR(x)            (*(__IO hw_cmp_scr_t *) HW_CMP_SCR_ADDR(x))
#define HW_CMP_SCR_RD(x)         (HW_CMP_SCR(x).U)
#define HW_CMP_SCR_WR(x, v)      (HW_CMP_SCR(x).U = (v))
#define HW_CMP_SCR_SET(x, v)     (HW_CMP_SCR_WR(x, HW_CMP_SCR_RD(x) |  (v)))
#define HW_CMP_SCR_CLR(x, v)     (HW_CMP_SCR_WR(x, HW_CMP_SCR_RD(x) & ~(v)))
#define HW_CMP_SCR_TOG(x, v)     (HW_CMP_SCR_WR(x, HW_CMP_SCR_RD(x) ^  (v)))
/*@}*/

/*
 * Constants & macros for individual CMP_SCR bitfields
 */

/*!
 * @name Register CMP_SCR, field COUT[0] (RO)
 *
 * Returns the current value of the Analog Comparator output, when read. The
 * field is reset to 0 and will read as CR1[INV] when the Analog Comparator module
 * is disabled, that is, when CR1[EN] = 0. Writes to this field are ignored.
 */
/*@{*/
#define BP_CMP_SCR_COUT      (0U)          /*!< Bit position for CMP_SCR_COUT. */
#define BM_CMP_SCR_COUT      (0x01U)       /*!< Bit mask for CMP_SCR_COUT. */
#define BS_CMP_SCR_COUT      (1U)          /*!< Bit field size in bits for CMP_SCR_COUT. */

/*! @brief Read current value of the CMP_SCR_COUT field. */
#define BR_CMP_SCR_COUT(x)   (BITBAND_ACCESS8(HW_CMP_SCR_ADDR(x), BP_CMP_SCR_COUT))
/*@}*/

/*!
 * @name Register CMP_SCR, field CFF[1] (W1C)
 *
 * Detects a falling-edge on COUT, when set, during normal operation. CFF is
 * cleared by writing 1 to it. During Stop modes, CFF is level sensitive is edge
 * sensitive .
 *
 * Values:
 * - 0 - Falling-edge on COUT has not been detected.
 * - 1 - Falling-edge on COUT has occurred.
 */
/*@{*/
#define BP_CMP_SCR_CFF       (1U)          /*!< Bit position for CMP_SCR_CFF. */
#define BM_CMP_SCR_CFF       (0x02U)       /*!< Bit mask for CMP_SCR_CFF. */
#define BS_CMP_SCR_CFF       (1U)          /*!< Bit field size in bits for CMP_SCR_CFF. */

/*! @brief Read current value of the CMP_SCR_CFF field. */
#define BR_CMP_SCR_CFF(x)    (BITBAND_ACCESS8(HW_CMP_SCR_ADDR(x), BP_CMP_SCR_CFF))

/*! @brief Format value for bitfield CMP_SCR_CFF. */
#define BF_CMP_SCR_CFF(v)    ((uint8_t)((uint8_t)(v) << BP_CMP_SCR_CFF) & BM_CMP_SCR_CFF)

/*! @brief Set the CFF field to a new value. */
#define BW_CMP_SCR_CFF(x, v) (BITBAND_ACCESS8(HW_CMP_SCR_ADDR(x), BP_CMP_SCR_CFF) = (v))
/*@}*/

/*!
 * @name Register CMP_SCR, field CFR[2] (W1C)
 *
 * Detects a rising-edge on COUT, when set, during normal operation. CFR is
 * cleared by writing 1 to it. During Stop modes, CFR is level sensitive is edge
 * sensitive .
 *
 * Values:
 * - 0 - Rising-edge on COUT has not been detected.
 * - 1 - Rising-edge on COUT has occurred.
 */
/*@{*/
#define BP_CMP_SCR_CFR       (2U)          /*!< Bit position for CMP_SCR_CFR. */
#define BM_CMP_SCR_CFR       (0x04U)       /*!< Bit mask for CMP_SCR_CFR. */
#define BS_CMP_SCR_CFR       (1U)          /*!< Bit field size in bits for CMP_SCR_CFR. */

/*! @brief Read current value of the CMP_SCR_CFR field. */
#define BR_CMP_SCR_CFR(x)    (BITBAND_ACCESS8(HW_CMP_SCR_ADDR(x), BP_CMP_SCR_CFR))

/*! @brief Format value for bitfield CMP_SCR_CFR. */
#define BF_CMP_SCR_CFR(v)    ((uint8_t)((uint8_t)(v) << BP_CMP_SCR_CFR) & BM_CMP_SCR_CFR)

/*! @brief Set the CFR field to a new value. */
#define BW_CMP_SCR_CFR(x, v) (BITBAND_ACCESS8(HW_CMP_SCR_ADDR(x), BP_CMP_SCR_CFR) = (v))
/*@}*/

/*!
 * @name Register CMP_SCR, field IEF[3] (RW)
 *
 * Enables the CFF interrupt from the CMP. When this field is set, an interrupt
 * will be asserted when CFF is set.
 *
 * Values:
 * - 0 - Interrupt is disabled.
 * - 1 - Interrupt is enabled.
 */
/*@{*/
#define BP_CMP_SCR_IEF       (3U)          /*!< Bit position for CMP_SCR_IEF. */
#define BM_CMP_SCR_IEF       (0x08U)       /*!< Bit mask for CMP_SCR_IEF. */
#define BS_CMP_SCR_IEF       (1U)          /*!< Bit field size in bits for CMP_SCR_IEF. */

/*! @brief Read current value of the CMP_SCR_IEF field. */
#define BR_CMP_SCR_IEF(x)    (BITBAND_ACCESS8(HW_CMP_SCR_ADDR(x), BP_CMP_SCR_IEF))

/*! @brief Format value for bitfield CMP_SCR_IEF. */
#define BF_CMP_SCR_IEF(v)    ((uint8_t)((uint8_t)(v) << BP_CMP_SCR_IEF) & BM_CMP_SCR_IEF)

/*! @brief Set the IEF field to a new value. */
#define BW_CMP_SCR_IEF(x, v) (BITBAND_ACCESS8(HW_CMP_SCR_ADDR(x), BP_CMP_SCR_IEF) = (v))
/*@}*/

/*!
 * @name Register CMP_SCR, field IER[4] (RW)
 *
 * Enables the CFR interrupt from the CMP. When this field is set, an interrupt
 * will be asserted when CFR is set.
 *
 * Values:
 * - 0 - Interrupt is disabled.
 * - 1 - Interrupt is enabled.
 */
/*@{*/
#define BP_CMP_SCR_IER       (4U)          /*!< Bit position for CMP_SCR_IER. */
#define BM_CMP_SCR_IER       (0x10U)       /*!< Bit mask for CMP_SCR_IER. */
#define BS_CMP_SCR_IER       (1U)          /*!< Bit field size in bits for CMP_SCR_IER. */

/*! @brief Read current value of the CMP_SCR_IER field. */
#define BR_CMP_SCR_IER(x)    (BITBAND_ACCESS8(HW_CMP_SCR_ADDR(x), BP_CMP_SCR_IER))

/*! @brief Format value for bitfield CMP_SCR_IER. */
#define BF_CMP_SCR_IER(v)    ((uint8_t)((uint8_t)(v) << BP_CMP_SCR_IER) & BM_CMP_SCR_IER)

/*! @brief Set the IER field to a new value. */
#define BW_CMP_SCR_IER(x, v) (BITBAND_ACCESS8(HW_CMP_SCR_ADDR(x), BP_CMP_SCR_IER) = (v))
/*@}*/

/*!
 * @name Register CMP_SCR, field DMAEN[6] (RW)
 *
 * Enables the DMA transfer triggered from the CMP module. When this field is
 * set, a DMA request is asserted when CFR or CFF is set.
 *
 * Values:
 * - 0 - DMA is disabled.
 * - 1 - DMA is enabled.
 */
/*@{*/
#define BP_CMP_SCR_DMAEN     (6U)          /*!< Bit position for CMP_SCR_DMAEN. */
#define BM_CMP_SCR_DMAEN     (0x40U)       /*!< Bit mask for CMP_SCR_DMAEN. */
#define BS_CMP_SCR_DMAEN     (1U)          /*!< Bit field size in bits for CMP_SCR_DMAEN. */

/*! @brief Read current value of the CMP_SCR_DMAEN field. */
#define BR_CMP_SCR_DMAEN(x)  (BITBAND_ACCESS8(HW_CMP_SCR_ADDR(x), BP_CMP_SCR_DMAEN))

/*! @brief Format value for bitfield CMP_SCR_DMAEN. */
#define BF_CMP_SCR_DMAEN(v)  ((uint8_t)((uint8_t)(v) << BP_CMP_SCR_DMAEN) & BM_CMP_SCR_DMAEN)

/*! @brief Set the DMAEN field to a new value. */
#define BW_CMP_SCR_DMAEN(x, v) (BITBAND_ACCESS8(HW_CMP_SCR_ADDR(x), BP_CMP_SCR_DMAEN) = (v))
/*@}*/

/*******************************************************************************
 * HW_CMP_DACCR - DAC Control Register
 ******************************************************************************/

/*!
 * @brief HW_CMP_DACCR - DAC Control Register (RW)
 *
 * Reset value: 0x00U
 */
typedef union _hw_cmp_daccr
{
    uint8_t U;
    struct _hw_cmp_daccr_bitfields
    {
        uint8_t VOSEL : 6;             /*!< [5:0] DAC Output Voltage Select */
        uint8_t VRSEL : 1;             /*!< [6] Supply Voltage Reference Source Select */
        uint8_t DACEN : 1;             /*!< [7] DAC Enable */
    } B;
} hw_cmp_daccr_t;

/*!
 * @name Constants and macros for entire CMP_DACCR register
 */
/*@{*/
#define HW_CMP_DACCR_ADDR(x)     ((x) + 0x4U)

#define HW_CMP_DACCR(x)          (*(__IO hw_cmp_daccr_t *) HW_CMP_DACCR_ADDR(x))
#define HW_CMP_DACCR_RD(x)       (HW_CMP_DACCR(x).U)
#define HW_CMP_DACCR_WR(x, v)    (HW_CMP_DACCR(x).U = (v))
#define HW_CMP_DACCR_SET(x, v)   (HW_CMP_DACCR_WR(x, HW_CMP_DACCR_RD(x) |  (v)))
#define HW_CMP_DACCR_CLR(x, v)   (HW_CMP_DACCR_WR(x, HW_CMP_DACCR_RD(x) & ~(v)))
#define HW_CMP_DACCR_TOG(x, v)   (HW_CMP_DACCR_WR(x, HW_CMP_DACCR_RD(x) ^  (v)))
/*@}*/

/*
 * Constants & macros for individual CMP_DACCR bitfields
 */

/*!
 * @name Register CMP_DACCR, field VOSEL[5:0] (RW)
 *
 * Selects an output voltage from one of 64 distinct levels. DACO = (V in /64) *
 * (VOSEL[5:0] + 1) , so the DACO range is from V in /64 to V in .
 */
/*@{*/
#define BP_CMP_DACCR_VOSEL   (0U)          /*!< Bit position for CMP_DACCR_VOSEL. */
#define BM_CMP_DACCR_VOSEL   (0x3FU)       /*!< Bit mask for CMP_DACCR_VOSEL. */
#define BS_CMP_DACCR_VOSEL   (6U)          /*!< Bit field size in bits for CMP_DACCR_VOSEL. */

/*! @brief Read current value of the CMP_DACCR_VOSEL field. */
#define BR_CMP_DACCR_VOSEL(x) (HW_CMP_DACCR(x).B.VOSEL)

/*! @brief Format value for bitfield CMP_DACCR_VOSEL. */
#define BF_CMP_DACCR_VOSEL(v) ((uint8_t)((uint8_t)(v) << BP_CMP_DACCR_VOSEL) & BM_CMP_DACCR_VOSEL)

/*! @brief Set the VOSEL field to a new value. */
#define BW_CMP_DACCR_VOSEL(x, v) (HW_CMP_DACCR_WR(x, (HW_CMP_DACCR_RD(x) & ~BM_CMP_DACCR_VOSEL) | BF_CMP_DACCR_VOSEL(v)))
/*@}*/

/*!
 * @name Register CMP_DACCR, field VRSEL[6] (RW)
 *
 * Values:
 * - 0 - V is selected as resistor ladder network supply reference V. in1 in
 * - 1 - V is selected as resistor ladder network supply reference V. in2 in
 */
/*@{*/
#define BP_CMP_DACCR_VRSEL   (6U)          /*!< Bit position for CMP_DACCR_VRSEL. */
#define BM_CMP_DACCR_VRSEL   (0x40U)       /*!< Bit mask for CMP_DACCR_VRSEL. */
#define BS_CMP_DACCR_VRSEL   (1U)          /*!< Bit field size in bits for CMP_DACCR_VRSEL. */

/*! @brief Read current value of the CMP_DACCR_VRSEL field. */
#define BR_CMP_DACCR_VRSEL(x) (BITBAND_ACCESS8(HW_CMP_DACCR_ADDR(x), BP_CMP_DACCR_VRSEL))

/*! @brief Format value for bitfield CMP_DACCR_VRSEL. */
#define BF_CMP_DACCR_VRSEL(v) ((uint8_t)((uint8_t)(v) << BP_CMP_DACCR_VRSEL) & BM_CMP_DACCR_VRSEL)

/*! @brief Set the VRSEL field to a new value. */
#define BW_CMP_DACCR_VRSEL(x, v) (BITBAND_ACCESS8(HW_CMP_DACCR_ADDR(x), BP_CMP_DACCR_VRSEL) = (v))
/*@}*/

/*!
 * @name Register CMP_DACCR, field DACEN[7] (RW)
 *
 * Enables the DAC. When the DAC is disabled, it is powered down to conserve
 * power.
 *
 * Values:
 * - 0 - DAC is disabled.
 * - 1 - DAC is enabled.
 */
/*@{*/
#define BP_CMP_DACCR_DACEN   (7U)          /*!< Bit position for CMP_DACCR_DACEN. */
#define BM_CMP_DACCR_DACEN   (0x80U)       /*!< Bit mask for CMP_DACCR_DACEN. */
#define BS_CMP_DACCR_DACEN   (1U)          /*!< Bit field size in bits for CMP_DACCR_DACEN. */

/*! @brief Read current value of the CMP_DACCR_DACEN field. */
#define BR_CMP_DACCR_DACEN(x) (BITBAND_ACCESS8(HW_CMP_DACCR_ADDR(x), BP_CMP_DACCR_DACEN))

/*! @brief Format value for bitfield CMP_DACCR_DACEN. */
#define BF_CMP_DACCR_DACEN(v) ((uint8_t)((uint8_t)(v) << BP_CMP_DACCR_DACEN) & BM_CMP_DACCR_DACEN)

/*! @brief Set the DACEN field to a new value. */
#define BW_CMP_DACCR_DACEN(x, v) (BITBAND_ACCESS8(HW_CMP_DACCR_ADDR(x), BP_CMP_DACCR_DACEN) = (v))
/*@}*/

/*******************************************************************************
 * HW_CMP_MUXCR - MUX Control Register
 ******************************************************************************/

/*!
 * @brief HW_CMP_MUXCR - MUX Control Register (RW)
 *
 * Reset value: 0x00U
 */
typedef union _hw_cmp_muxcr
{
    uint8_t U;
    struct _hw_cmp_muxcr_bitfields
    {
        uint8_t MSEL : 3;              /*!< [2:0] Minus Input Mux Control */
        uint8_t PSEL : 3;              /*!< [5:3] Plus Input Mux Control */
        uint8_t RESERVED0 : 1;         /*!< [6]  */
        uint8_t PSTM : 1;              /*!< [7] Pass Through Mode Enable */
    } B;
} hw_cmp_muxcr_t;

/*!
 * @name Constants and macros for entire CMP_MUXCR register
 */
/*@{*/
#define HW_CMP_MUXCR_ADDR(x)     ((x) + 0x5U)

#define HW_CMP_MUXCR(x)          (*(__IO hw_cmp_muxcr_t *) HW_CMP_MUXCR_ADDR(x))
#define HW_CMP_MUXCR_RD(x)       (HW_CMP_MUXCR(x).U)
#define HW_CMP_MUXCR_WR(x, v)    (HW_CMP_MUXCR(x).U = (v))
#define HW_CMP_MUXCR_SET(x, v)   (HW_CMP_MUXCR_WR(x, HW_CMP_MUXCR_RD(x) |  (v)))
#define HW_CMP_MUXCR_CLR(x, v)   (HW_CMP_MUXCR_WR(x, HW_CMP_MUXCR_RD(x) & ~(v)))
#define HW_CMP_MUXCR_TOG(x, v)   (HW_CMP_MUXCR_WR(x, HW_CMP_MUXCR_RD(x) ^  (v)))
/*@}*/

/*
 * Constants & macros for individual CMP_MUXCR bitfields
 */

/*!
 * @name Register CMP_MUXCR, field MSEL[2:0] (RW)
 *
 * Determines which input is selected for the minus input of the comparator. For
 * INx inputs, see CMP, DAC, and ANMUX block diagrams. When an inappropriate
 * operation selects the same input for both muxes, the comparator automatically
 * shuts down to prevent itself from becoming a noise generator.
 *
 * Values:
 * - 000 - IN0
 * - 001 - IN1
 * - 010 - IN2
 * - 011 - IN3
 * - 100 - IN4
 * - 101 - IN5
 * - 110 - IN6
 * - 111 - IN7
 */
/*@{*/
#define BP_CMP_MUXCR_MSEL    (0U)          /*!< Bit position for CMP_MUXCR_MSEL. */
#define BM_CMP_MUXCR_MSEL    (0x07U)       /*!< Bit mask for CMP_MUXCR_MSEL. */
#define BS_CMP_MUXCR_MSEL    (3U)          /*!< Bit field size in bits for CMP_MUXCR_MSEL. */

/*! @brief Read current value of the CMP_MUXCR_MSEL field. */
#define BR_CMP_MUXCR_MSEL(x) (HW_CMP_MUXCR(x).B.MSEL)

/*! @brief Format value for bitfield CMP_MUXCR_MSEL. */
#define BF_CMP_MUXCR_MSEL(v) ((uint8_t)((uint8_t)(v) << BP_CMP_MUXCR_MSEL) & BM_CMP_MUXCR_MSEL)

/*! @brief Set the MSEL field to a new value. */
#define BW_CMP_MUXCR_MSEL(x, v) (HW_CMP_MUXCR_WR(x, (HW_CMP_MUXCR_RD(x) & ~BM_CMP_MUXCR_MSEL) | BF_CMP_MUXCR_MSEL(v)))
/*@}*/

/*!
 * @name Register CMP_MUXCR, field PSEL[5:3] (RW)
 *
 * Determines which input is selected for the plus input of the comparator. For
 * INx inputs, see CMP, DAC, and ANMUX block diagrams. When an inappropriate
 * operation selects the same input for both muxes, the comparator automatically
 * shuts down to prevent itself from becoming a noise generator.
 *
 * Values:
 * - 000 - IN0
 * - 001 - IN1
 * - 010 - IN2
 * - 011 - IN3
 * - 100 - IN4
 * - 101 - IN5
 * - 110 - IN6
 * - 111 - IN7
 */
/*@{*/
#define BP_CMP_MUXCR_PSEL    (3U)          /*!< Bit position for CMP_MUXCR_PSEL. */
#define BM_CMP_MUXCR_PSEL    (0x38U)       /*!< Bit mask for CMP_MUXCR_PSEL. */
#define BS_CMP_MUXCR_PSEL    (3U)          /*!< Bit field size in bits for CMP_MUXCR_PSEL. */

/*! @brief Read current value of the CMP_MUXCR_PSEL field. */
#define BR_CMP_MUXCR_PSEL(x) (HW_CMP_MUXCR(x).B.PSEL)

/*! @brief Format value for bitfield CMP_MUXCR_PSEL. */
#define BF_CMP_MUXCR_PSEL(v) ((uint8_t)((uint8_t)(v) << BP_CMP_MUXCR_PSEL) & BM_CMP_MUXCR_PSEL)

/*! @brief Set the PSEL field to a new value. */
#define BW_CMP_MUXCR_PSEL(x, v) (HW_CMP_MUXCR_WR(x, (HW_CMP_MUXCR_RD(x) & ~BM_CMP_MUXCR_PSEL) | BF_CMP_MUXCR_PSEL(v)))
/*@}*/

/*!
 * @name Register CMP_MUXCR, field PSTM[7] (RW)
 *
 * This bit is used to enable to MUX pass through mode. Pass through mode is
 * always available but for some devices this feature must be always disabled due to
 * the lack of package pins.
 *
 * Values:
 * - 0 - Pass Through Mode is disabled.
 * - 1 - Pass Through Mode is enabled.
 */
/*@{*/
#define BP_CMP_MUXCR_PSTM    (7U)          /*!< Bit position for CMP_MUXCR_PSTM. */
#define BM_CMP_MUXCR_PSTM    (0x80U)       /*!< Bit mask for CMP_MUXCR_PSTM. */
#define BS_CMP_MUXCR_PSTM    (1U)          /*!< Bit field size in bits for CMP_MUXCR_PSTM. */

/*! @brief Read current value of the CMP_MUXCR_PSTM field. */
#define BR_CMP_MUXCR_PSTM(x) (BITBAND_ACCESS8(HW_CMP_MUXCR_ADDR(x), BP_CMP_MUXCR_PSTM))

/*! @brief Format value for bitfield CMP_MUXCR_PSTM. */
#define BF_CMP_MUXCR_PSTM(v) ((uint8_t)((uint8_t)(v) << BP_CMP_MUXCR_PSTM) & BM_CMP_MUXCR_PSTM)

/*! @brief Set the PSTM field to a new value. */
#define BW_CMP_MUXCR_PSTM(x, v) (BITBAND_ACCESS8(HW_CMP_MUXCR_ADDR(x), BP_CMP_MUXCR_PSTM) = (v))
/*@}*/

/*******************************************************************************
 * hw_cmp_t - module struct
 ******************************************************************************/
/*!
 * @brief All CMP module registers.
 */
#pragma pack(1)
typedef struct _hw_cmp
{
    __IO hw_cmp_cr0_t CR0;                 /*!< [0x0] CMP Control Register 0 */
    __IO hw_cmp_cr1_t CR1;                 /*!< [0x1] CMP Control Register 1 */
    __IO hw_cmp_fpr_t FPR;                 /*!< [0x2] CMP Filter Period Register */
    __IO hw_cmp_scr_t SCR;                 /*!< [0x3] CMP Status and Control Register */
    __IO hw_cmp_daccr_t DACCR;             /*!< [0x4] DAC Control Register */
    __IO hw_cmp_muxcr_t MUXCR;             /*!< [0x5] MUX Control Register */
} hw_cmp_t;
#pragma pack()

/*! @brief Macro to access all CMP registers. */
/*! @param x CMP module instance base address. */
/*! @return Reference (not a pointer) to the registers struct. To get a pointer to the struct,
 *     use the '&' operator, like <code>&HW_CMP(CMP0_BASE)</code>. */
#define HW_CMP(x)      (*(hw_cmp_t *)(x))

#endif /* __HW_CMP_REGISTERS_H__ */
/* EOF */