The official Mbed 2 C/C++ SDK provides the software platform and libraries to build your applications.
Dependents: hello SerialTestv11 SerialTestv12 Sierpinski ... more
mbed 2
This is the mbed 2 library. If you'd like to learn about Mbed OS please see the mbed-os docs.
TARGET_RO359B/TOOLCHAIN_IAR/fsl_dspi_edma.h
- Committer:
- AnnaBridge
- Date:
- 2019-02-20
- Revision:
- 172:65be27845400
- Parent:
- 171:3a7713b1edbc
File content as of revision 172:65be27845400:
/* * Copyright (c) 2015, Freescale Semiconductor, Inc. * Copyright 2016-2017 NXP * * Redistribution and use in source and binary forms, with or without modification, * are permitted provided that the following conditions are met: * * o Redistributions of source code must retain the above copyright notice, this list * of conditions and the following disclaimer. * * o Redistributions in binary form must reproduce the above copyright notice, this * list of conditions and the following disclaimer in the documentation and/or * other materials provided with the distribution. * * o Neither the name of the copyright holder nor the names of its * contributors may be used to endorse or promote products derived from this * software without specific prior written permission. * * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE FOR * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. */ #ifndef _FSL_DSPI_EDMA_H_ #define _FSL_DSPI_EDMA_H_ #include "fsl_dspi.h" #include "fsl_edma.h" /*! * @addtogroup dspi_edma_driver * @{ */ /*********************************************************************************************************************** * Definitions **********************************************************************************************************************/ /*! * @brief Forward declaration of the DSPI eDMA master handle typedefs. */ typedef struct _dspi_master_edma_handle dspi_master_edma_handle_t; /*! * @brief Forward declaration of the DSPI eDMA slave handle typedefs. */ typedef struct _dspi_slave_edma_handle dspi_slave_edma_handle_t; /*! * @brief Completion callback function pointer type. * * @param base DSPI peripheral base address. * @param handle A pointer to the handle for the DSPI master. * @param status Success or error code describing whether the transfer completed. * @param userData An arbitrary pointer-dataSized value passed from the application. */ typedef void (*dspi_master_edma_transfer_callback_t)(SPI_Type *base, dspi_master_edma_handle_t *handle, status_t status, void *userData); /*! * @brief Completion callback function pointer type. * * @param base DSPI peripheral base address. * @param handle A pointer to the handle for the DSPI slave. * @param status Success or error code describing whether the transfer completed. * @param userData An arbitrary pointer-dataSized value passed from the application. */ typedef void (*dspi_slave_edma_transfer_callback_t)(SPI_Type *base, dspi_slave_edma_handle_t *handle, status_t status, void *userData); /*! @brief DSPI master eDMA transfer handle structure used for the transactional API. */ struct _dspi_master_edma_handle { uint32_t bitsPerFrame; /*!< The desired number of bits per frame. */ volatile uint32_t command; /*!< The desired data command. */ volatile uint32_t lastCommand; /*!< The desired last data command. */ uint8_t fifoSize; /*!< FIFO dataSize. */ volatile bool isPcsActiveAfterTransfer; /*!< Indicates whether the PCS signal keeps active after the last frame transfer.*/ uint8_t nbytes; /*!< eDMA minor byte transfer count initially configured. */ volatile uint8_t state; /*!< DSPI transfer state , _dspi_transfer_state.*/ uint8_t *volatile txData; /*!< Send buffer. */ uint8_t *volatile rxData; /*!< Receive buffer. */ volatile size_t remainingSendByteCount; /*!< A number of bytes remaining to send.*/ volatile size_t remainingReceiveByteCount; /*!< A number of bytes remaining to receive.*/ size_t totalByteCount; /*!< A number of transfer bytes*/ uint32_t rxBuffIfNull; /*!< Used if there is not rxData for DMA purpose.*/ uint32_t txBuffIfNull; /*!< Used if there is not txData for DMA purpose.*/ dspi_master_edma_transfer_callback_t callback; /*!< Completion callback. */ void *userData; /*!< Callback user data. */ edma_handle_t *edmaRxRegToRxDataHandle; /*!<edma_handle_t handle point used for RxReg to RxData buff*/ edma_handle_t *edmaTxDataToIntermediaryHandle; /*!<edma_handle_t handle point used for TxData to Intermediary*/ edma_handle_t *edmaIntermediaryToTxRegHandle; /*!<edma_handle_t handle point used for Intermediary to TxReg*/ edma_tcd_t dspiSoftwareTCD[2]; /*!<SoftwareTCD , internal used*/ }; /*! @brief DSPI slave eDMA transfer handle structure used for the transactional API.*/ struct _dspi_slave_edma_handle { uint32_t bitsPerFrame; /*!< The desired number of bits per frame. */ uint8_t *volatile txData; /*!< Send buffer. */ uint8_t *volatile rxData; /*!< Receive buffer. */ volatile size_t remainingSendByteCount; /*!< A number of bytes remaining to send.*/ volatile size_t remainingReceiveByteCount; /*!< A number of bytes remaining to receive.*/ size_t totalByteCount; /*!< A number of transfer bytes*/ uint32_t rxBuffIfNull; /*!< Used if there is not rxData for DMA purpose.*/ uint32_t txBuffIfNull; /*!< Used if there is not txData for DMA purpose.*/ uint32_t txLastData; /*!< Used if there is an extra byte when 16bits per frame for DMA purpose.*/ uint8_t nbytes; /*!< eDMA minor byte transfer count initially configured. */ volatile uint8_t state; /*!< DSPI transfer state.*/ dspi_slave_edma_transfer_callback_t callback; /*!< Completion callback. */ void *userData; /*!< Callback user data. */ edma_handle_t *edmaRxRegToRxDataHandle; /*!<edma_handle_t handle point used for RxReg to RxData buff*/ edma_handle_t *edmaTxDataToTxRegHandle; /*!<edma_handle_t handle point used for TxData to TxReg*/ }; /*********************************************************************************************************************** * API **********************************************************************************************************************/ #if defined(__cplusplus) extern "C" { #endif /*_cplusplus*/ /*Transactional APIs*/ /*! * @brief Initializes the DSPI master eDMA handle. * * This function initializes the DSPI eDMA handle which can be used for other DSPI transactional APIs. Usually, for a * specified DSPI instance, call this API once to get the initialized handle. * * Note that DSPI eDMA has separated (RX and TX as two sources) or shared (RX and TX are the same source) DMA request * source. * (1) For the separated DMA request source, enable and set the RX DMAMUX source for edmaRxRegToRxDataHandle and * TX DMAMUX source for edmaIntermediaryToTxRegHandle. * (2) For the shared DMA request source, enable and set the RX/RX DMAMUX source for the edmaRxRegToRxDataHandle. * * @param base DSPI peripheral base address. * @param handle DSPI handle pointer to dspi_master_edma_handle_t. * @param callback DSPI callback. * @param userData A callback function parameter. * @param edmaRxRegToRxDataHandle edmaRxRegToRxDataHandle pointer to edma_handle_t. * @param edmaTxDataToIntermediaryHandle edmaTxDataToIntermediaryHandle pointer to edma_handle_t. * @param edmaIntermediaryToTxRegHandle edmaIntermediaryToTxRegHandle pointer to edma_handle_t. */ void DSPI_MasterTransferCreateHandleEDMA(SPI_Type *base, dspi_master_edma_handle_t *handle, dspi_master_edma_transfer_callback_t callback, void *userData, edma_handle_t *edmaRxRegToRxDataHandle, edma_handle_t *edmaTxDataToIntermediaryHandle, edma_handle_t *edmaIntermediaryToTxRegHandle); /*! * @brief DSPI master transfer data using eDMA. * * This function transfers data using eDMA. This is a non-blocking function, which returns right away. When all data * is transferred, the callback function is called. * * @param base DSPI peripheral base address. * @param handle A pointer to the dspi_master_edma_handle_t structure which stores the transfer state. * @param transfer A pointer to the dspi_transfer_t structure. * @return status of status_t. */ status_t DSPI_MasterTransferEDMA(SPI_Type *base, dspi_master_edma_handle_t *handle, dspi_transfer_t *transfer); /*! * @brief DSPI master aborts a transfer which is using eDMA. * * This function aborts a transfer which is using eDMA. * * @param base DSPI peripheral base address. * @param handle A pointer to the dspi_master_edma_handle_t structure which stores the transfer state. */ void DSPI_MasterTransferAbortEDMA(SPI_Type *base, dspi_master_edma_handle_t *handle); /*! * @brief Gets the master eDMA transfer count. * * This function gets the master eDMA transfer count. * * @param base DSPI peripheral base address. * @param handle A pointer to the dspi_master_edma_handle_t structure which stores the transfer state. * @param count A number of bytes transferred by the non-blocking transaction. * @return status of status_t. */ status_t DSPI_MasterTransferGetCountEDMA(SPI_Type *base, dspi_master_edma_handle_t *handle, size_t *count); /*! * @brief Initializes the DSPI slave eDMA handle. * * This function initializes the DSPI eDMA handle which can be used for other DSPI transactional APIs. Usually, for a * specified DSPI instance, call this API once to get the initialized handle. * * Note that DSPI eDMA has separated (RN and TX in 2 sources) or shared (RX and TX are the same source) DMA request * source. * (1)For the separated DMA request source, enable and set the RX DMAMUX source for edmaRxRegToRxDataHandle and * TX DMAMUX source for edmaTxDataToTxRegHandle. * (2)For the shared DMA request source, enable and set the RX/RX DMAMUX source for the edmaRxRegToRxDataHandle. * * @param base DSPI peripheral base address. * @param handle DSPI handle pointer to dspi_slave_edma_handle_t. * @param callback DSPI callback. * @param userData A callback function parameter. * @param edmaRxRegToRxDataHandle edmaRxRegToRxDataHandle pointer to edma_handle_t. * @param edmaTxDataToTxRegHandle edmaTxDataToTxRegHandle pointer to edma_handle_t. */ void DSPI_SlaveTransferCreateHandleEDMA(SPI_Type *base, dspi_slave_edma_handle_t *handle, dspi_slave_edma_transfer_callback_t callback, void *userData, edma_handle_t *edmaRxRegToRxDataHandle, edma_handle_t *edmaTxDataToTxRegHandle); /*! * @brief DSPI slave transfer data using eDMA. * * This function transfers data using eDMA. This is a non-blocking function, which returns right away. When all data * is transferred, the callback function is called. * Note that the slave eDMA transfer doesn't support transfer_size is 1 when the bitsPerFrame is greater * than eight. * @param base DSPI peripheral base address. * @param handle A pointer to the dspi_slave_edma_handle_t structure which stores the transfer state. * @param transfer A pointer to the dspi_transfer_t structure. * @return status of status_t. */ status_t DSPI_SlaveTransferEDMA(SPI_Type *base, dspi_slave_edma_handle_t *handle, dspi_transfer_t *transfer); /*! * @brief DSPI slave aborts a transfer which is using eDMA. * * This function aborts a transfer which is using eDMA. * * @param base DSPI peripheral base address. * @param handle A pointer to the dspi_slave_edma_handle_t structure which stores the transfer state. */ void DSPI_SlaveTransferAbortEDMA(SPI_Type *base, dspi_slave_edma_handle_t *handle); /*! * @brief Gets the slave eDMA transfer count. * * This function gets the slave eDMA transfer count. * * @param base DSPI peripheral base address. * @param handle A pointer to the dspi_slave_edma_handle_t structure which stores the transfer state. * @param count A number of bytes transferred so far by the non-blocking transaction. * @return status of status_t. */ status_t DSPI_SlaveTransferGetCountEDMA(SPI_Type *base, dspi_slave_edma_handle_t *handle, size_t *count); #if defined(__cplusplus) } #endif /*_cplusplus*/ /*! *@} */ #endif /*_FSL_DSPI_EDMA_H_*/