mbed - The official Mbed 2 C/C++ SDK provides the softwa…

Users » mbed_official » Code » mbed

mbed official / mbed

The official Mbed 2 C/C++ SDK provides the software platform and libraries to build your applications.

Dependents: hello SerialTestv11 SerialTestv12 Sierpinski ... more

mbed 2

This is the mbed 2 library. If you'd like to learn about Mbed OS please see the mbed-os docs.

Diff: TARGET_DISCO_F303VC/TARGET_STM/TARGET_STM32F3/device/stm32f3xx_hal_spi.h

Revision:: 168:b9e159c1930a
Parent:: 163:e59c8e839560

--- a/TARGET_DISCO_F303VC/TARGET_STM/TARGET_STM32F3/device/stm32f3xx_hal_spi.h	Fri May 11 16:51:14 2018 +0100
+++ b/TARGET_DISCO_F303VC/TARGET_STM/TARGET_STM32F3/device/stm32f3xx_hal_spi.h	Thu May 24 15:35:55 2018 +0100
@@ -2,8 +2,6 @@
   ******************************************************************************
   * @file    stm32f3xx_hal_spi.h
   * @author  MCD Application Team
-  * @version V1.4.0
-  * @date    16-December-2016
   * @brief   Header file of SPI HAL module.
   ******************************************************************************
   * @attention
@@ -398,16 +396,16 @@
   */
 
 /** @brief  Reset SPI handle state.
-  * @param  __HANDLE__: specifies the SPI Handle.
+  * @param  __HANDLE__ specifies the SPI Handle.
   *         This parameter can be SPI where x: 1, 2, or 3 to select the SPI peripheral.
   * @retval None
   */
 #define __HAL_SPI_RESET_HANDLE_STATE(__HANDLE__) ((__HANDLE__)->State = HAL_SPI_STATE_RESET)
 
 /** @brief  Enable the specified SPI interrupts.
-  * @param  __HANDLE__: specifies the SPI Handle.
+  * @param  __HANDLE__ specifies the SPI Handle.
   *         This parameter can be SPI where x: 1, 2, or 3 to select the SPI peripheral.
-  * @param  __INTERRUPT__: specifies the interrupt source to enable.
+  * @param  __INTERRUPT__ specifies the interrupt source to enable.
   *         This parameter can be one of the following values:
   *            @arg SPI_IT_TXE: Tx buffer empty interrupt enable
   *            @arg SPI_IT_RXNE: RX buffer not empty interrupt enable
@@ -417,9 +415,9 @@
 #define __HAL_SPI_ENABLE_IT(__HANDLE__, __INTERRUPT__)   SET_BIT((__HANDLE__)->Instance->CR2, (__INTERRUPT__))
 
 /** @brief  Disable the specified SPI interrupts.
-  * @param  __HANDLE__: specifies the SPI handle.
+  * @param  __HANDLE__ specifies the SPI handle.
   *         This parameter can be SPIx where x: 1, 2, or 3 to select the SPI peripheral.
-  * @param  __INTERRUPT__: specifies the interrupt source to disable.
+  * @param  __INTERRUPT__ specifies the interrupt source to disable.
   *         This parameter can be one of the following values:
   *            @arg SPI_IT_TXE: Tx buffer empty interrupt enable
   *            @arg SPI_IT_RXNE: RX buffer not empty interrupt enable
@@ -429,9 +427,9 @@
 #define __HAL_SPI_DISABLE_IT(__HANDLE__, __INTERRUPT__)  CLEAR_BIT((__HANDLE__)->Instance->CR2, (__INTERRUPT__))
 
 /** @brief  Check whether the specified SPI interrupt source is enabled or not.
-  * @param  __HANDLE__: specifies the SPI Handle.
+  * @param  __HANDLE__ specifies the SPI Handle.
   *         This parameter can be SPI where x: 1, 2, or 3 to select the SPI peripheral.
-  * @param  __INTERRUPT__: specifies the SPI interrupt source to check.
+  * @param  __INTERRUPT__ specifies the SPI interrupt source to check.
   *          This parameter can be one of the following values:
   *            @arg SPI_IT_TXE: Tx buffer empty interrupt enable
   *            @arg SPI_IT_RXNE: RX buffer not empty interrupt enable
@@ -441,9 +439,9 @@
 #define __HAL_SPI_GET_IT_SOURCE(__HANDLE__, __INTERRUPT__) ((((__HANDLE__)->Instance->CR2 & (__INTERRUPT__)) == (__INTERRUPT__)) ? SET : RESET)
 
 /** @brief  Check whether the specified SPI flag is set or not.
-  * @param  __HANDLE__: specifies the SPI Handle.
+  * @param  __HANDLE__ specifies the SPI Handle.
   *         This parameter can be SPI where x: 1, 2, or 3 to select the SPI peripheral.
-  * @param  __FLAG__: specifies the flag to check.
+  * @param  __FLAG__ specifies the flag to check.
   *         This parameter can be one of the following values:
   *            @arg SPI_FLAG_RXNE: Receive buffer not empty flag
   *            @arg SPI_FLAG_TXE: Transmit buffer empty flag
@@ -459,14 +457,14 @@
 #define __HAL_SPI_GET_FLAG(__HANDLE__, __FLAG__) ((((__HANDLE__)->Instance->SR) & (__FLAG__)) == (__FLAG__))
 
 /** @brief  Clear the SPI CRCERR pending flag.
-  * @param  __HANDLE__: specifies the SPI Handle.
+  * @param  __HANDLE__ specifies the SPI Handle.
   *         This parameter can be SPI where x: 1, 2, or 3 to select the SPI peripheral.
   * @retval None
   */
 #define __HAL_SPI_CLEAR_CRCERRFLAG(__HANDLE__) ((__HANDLE__)->Instance->SR = (uint16_t)(~SPI_FLAG_CRCERR))
 
 /** @brief  Clear the SPI MODF pending flag.
-  * @param  __HANDLE__: specifies the SPI Handle.
+  * @param  __HANDLE__ specifies the SPI Handle.
   *         This parameter can be SPI where x: 1, 2, or 3 to select the SPI peripheral.
   * @retval None
   */
@@ -479,7 +477,7 @@
   } while(0U)
 
 /** @brief  Clear the SPI OVR pending flag.
-  * @param  __HANDLE__: specifies the SPI Handle.
+  * @param  __HANDLE__ specifies the SPI Handle.
   *         This parameter can be SPI where x: 1, 2, or 3 to select the SPI peripheral.
   * @retval None
   */
@@ -492,7 +490,7 @@
   } while(0U)
 
 /** @brief  Clear the SPI FRE pending flag.
-  * @param  __HANDLE__: specifies the SPI Handle.
+  * @param  __HANDLE__ specifies the SPI Handle.
   *         This parameter can be SPI where x: 1, 2, or 3 to select the SPI peripheral.
   * @retval None
   */
@@ -504,14 +502,14 @@
   }while(0U)
 
 /** @brief  Enable the SPI peripheral.
-  * @param  __HANDLE__: specifies the SPI Handle.
+  * @param  __HANDLE__ specifies the SPI Handle.
   *         This parameter can be SPI where x: 1, 2, or 3 to select the SPI peripheral.
   * @retval None
   */
 #define __HAL_SPI_ENABLE(__HANDLE__)  SET_BIT((__HANDLE__)->Instance->CR1, SPI_CR1_SPE)
 
 /** @brief  Disable the SPI peripheral.
-  * @param  __HANDLE__: specifies the SPI Handle.
+  * @param  __HANDLE__ specifies the SPI Handle.
   *         This parameter can be SPI where x: 1, 2, or 3 to select the SPI peripheral.
   * @retval None
   */
@@ -527,21 +525,21 @@
   */
 
 /** @brief  Set the SPI transmit-only mode.
-  * @param  __HANDLE__: specifies the SPI Handle.
+  * @param  __HANDLE__ specifies the SPI Handle.
   *         This parameter can be SPI where x: 1, 2, or 3 to select the SPI peripheral.
   * @retval None
   */
 #define SPI_1LINE_TX(__HANDLE__)  SET_BIT((__HANDLE__)->Instance->CR1, SPI_CR1_BIDIOE)
 
 /** @brief  Set the SPI receive-only mode.
-  * @param  __HANDLE__: specifies the SPI Handle.
+  * @param  __HANDLE__ specifies the SPI Handle.
   *         This parameter can be SPI where x: 1, 2, or 3 to select the SPI peripheral.
   * @retval None
   */
 #define SPI_1LINE_RX(__HANDLE__)  CLEAR_BIT((__HANDLE__)->Instance->CR1, SPI_CR1_BIDIOE)
 
 /** @brief  Reset the CRC calculation of the SPI.
-  * @param  __HANDLE__: specifies the SPI Handle.
+  * @param  __HANDLE__ specifies the SPI Handle.
   *         This parameter can be SPI where x: 1, 2, or 3 to select the SPI peripheral.
   * @retval None
   */
@@ -613,6 +611,7 @@
 
 #define IS_SPI_DMA_HANDLE(HANDLE) ((HANDLE) != NULL)
 
+
 /**
   * @}
   */