The official Mbed 2 C/C++ SDK provides the software platform and libraries to build your applications.
Dependents: hello SerialTestv11 SerialTestv12 Sierpinski ... more
mbed 2
This is the mbed 2 library. If you'd like to learn about Mbed OS please see the mbed-os docs.
Diff: TARGET_MTB_MTS_DRAGONFLY/TOOLCHAIN_ARM_MICRO/PinNames.h
- Revision:
- 171:3a7713b1edbc
- Parent:
- 170:e95d10626187
--- /dev/null Thu Jan 01 00:00:00 1970 +0000 +++ b/TARGET_MTB_MTS_DRAGONFLY/TOOLCHAIN_ARM_MICRO/PinNames.h Thu Nov 08 11:45:42 2018 +0000 @@ -0,0 +1,247 @@ +/* mbed Microcontroller Library + ******************************************************************************* + * Copyright (c) 2014, STMicroelectronics + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * + * 1. Redistributions of source code must retain the above copyright notice, + * this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright notice, + * this list of conditions and the following disclaimer in the documentation + * and/or other materials provided with the distribution. + * 3. Neither the name of STMicroelectronics nor the names of its contributors + * may be used to endorse or promote products derived from this software + * without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" + * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE + * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR + * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER + * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, + * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE + * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + ******************************************************************************* + */ +#ifndef MBED_PINNAMES_H +#define MBED_PINNAMES_H + +#include "cmsis.h" +#include "PinNamesTypes.h" + +#ifdef __cplusplus +extern "C" { +#endif + +typedef enum { + // Not connected + NC = -1, + + PA_0 = 0x00, + PA_1 = 0x01, + PA_2 = 0x02, + PA_3 = 0x03, + PA_4 = 0x04, + PA_5 = 0x05, + PA_6 = 0x06, + PA_7 = 0x07, + PA_8 = 0x08, + PA_9 = 0x09, + PA_10 = 0x0A, + PA_11 = 0x0B, + PA_12 = 0x0C, + PA_13 = 0x0D, + PA_14 = 0x0E, + PA_15 = 0x0F, + + PB_0 = 0x10, + PB_1 = 0x11, + PB_2 = 0x12, + PB_3 = 0x13, + PB_4 = 0x14, + PB_5 = 0x15, + PB_6 = 0x16, + PB_7 = 0x17, + PB_8 = 0x18, + PB_9 = 0x19, + PB_10 = 0x1A, + PB_12 = 0x1C, + PB_13 = 0x1D, + PB_14 = 0x1E, + PB_15 = 0x1F, + + PC_0 = 0x20, + PC_1 = 0x21, + PC_2 = 0x22, + PC_3 = 0x23, + PC_4 = 0x24, + PC_5 = 0x25, + PC_6 = 0x26, + PC_7 = 0x27, + PC_8 = 0x28, + PC_9 = 0x29, + PC_10 = 0x2A, + PC_11 = 0x2B, + PC_12 = 0x2C, + PC_13 = 0x2D, + PC_14 = 0x2E, + PC_15 = 0x2F, + + PD_2 = 0x32, + + PH_0 = 0x70, + PH_1 = 0x71, + + // ADC internal channels + ADC_TEMP = 0xF0, + ADC_VREF = 0xF1, + ADC_VBAT = 0xF2, + + // Module pins + // Defined based on the external pin (40-pin connector) alternate function mapping (Page 15 of MTQ-H5-B01 device guide) + // Device guide used: S000628,Version1.4 + P_1 = PB_6, + P_2 = PA_14, + P_3 = PA_15, + P_4 = PB_4, + P_5 = NC, + P_6 = NC, + P_7 = NC, + P_8 = NC, + P_9 = PA_2, + P_10 = PA_7, + P_11 = PB_1, + P_12 = PA_1, + P_13 = NC, + P_14 = PB_5, + P_15 = PA_5, + P_16 = PB_8, + P_17 = PB_15, + P_18 = PC_2, + P_19 = PB_0, + P_20 = PC_0, + P_21 = PC_1, + P_22 = PC_4, + P_23 = PB_13, + P_24 = PC_9, + P_25 = PB_9, + P_26 = PA_6, + P_27 = PC_8, + P_28 = NC, + P_29 = PA_0, + P_30 = PA_9, + P_31 = PA_8, + P_32 = PA_3, + P_33 = NC, + P_34 = NC, + P_35 = NC, + P_36 = NC, + P_37 = NC, + P_38 = PB_3, + P_39 = PA_13, + P_40 = PB_7, + + // STDIO for console print +#ifdef MBED_CONF_TARGET_STDIO_UART_TX + STDIO_UART_TX = MBED_CONF_TARGET_STDIO_UART_TX, +#elif MBED_CONF_TARGET_USB_TX + STDIO_UART_TX = MBED_CONF_TARGET_USB_TX, +#else + STDIO_UART_TX = PB_6, +#endif + +#ifdef MBED_CONF_TARGET_STDIO_UART_RX + STDIO_UART_RX = MBED_CONF_TARGET_STDIO_UART_RX, +#elif MBED_CONF_TARGET_USB_RX + STDIO_UART_TX = MBED_CONF_TARGET_USB_RX, +#else + STDIO_UART_RX = PB_7, +#endif + + //DAPLink + USBTX = STDIO_UART_TX, + USBRX = STDIO_UART_RX, + SWDIO = PA_13, + SWCLK = PA_14, + + I2C1_SCL = PB_8, + I2C1_SDA = PB_9, + I2C3_SCL = PA_8, + I2C3_SDA = PC_9, + + I2C_SCL = I2C1_SCL, + I2C_SDA = I2C1_SDA, + + SPI1_MOSI = PB_5, + SPI1_MISO = PA_6, + SPI1_SCK = PA_5, + SPI2_MOSI = PB_15, + SPI2_MISO = PC_2, + SPI2_SCK = PB_13, + + SPI_MOSI = SPI1_MOSI, + SPI_MISO = SPI1_MISO, + SPI_SCK = SPI1_SCK, + SPI_CS1 = PA_3, //LCD CS + SPI_CS2 = PA_15, //SD Card CS + + SERIAL_TX = PA_2, + SERIAL_RX = PA_3, + SERIAL_RTS = PA_0, + SERIAL_CTS = PA_1, + SERIAL_DCD = PA_7, + SERIAL_DSR = PA_9, + SERIAL_DTR = PA_8, + SERIAL_RI = PB_1, + + WAKEUP = PA_0, + + // Generic signals namings + LED1 = PA_7, + LED2 = PC_4, + LED3 = PB_13, //MTB mapped to LINK_STATUS pin on module. + SW1 = PB_4, + GPIO1 = PC_8, + GPIO3 = PB_1, + AIN0 = PB_0, + AIN1 = PC_0, + AIN2 = PC_1, + + //Standardized button names + BUTTON1 = SW1, + + RADIO_TX = PC_7, + RADIO_RX = PC_6, + RADIO_RTS = PB_10, + RADIO_CTS = PB_12, + RADIO_DCD = NC, + RADIO_DSR = NC, + RADIO_DTR = NC, + RADIO_RI = NC, + MDMPWRON = PC_13, // 3G_ONOFF DragonFly Design Guide, Page No. 16 + MDMTXD = RADIO_TX, // Transmit Data + MDMRXD = RADIO_RX, // Receive Data + MDMRTS = RADIO_RTS, // Request to Send + MDMCTS = RADIO_CTS, // Clear to Send + MDMDCD = RADIO_DCD, // Data Carrier Detect + MDMDSR = RADIO_DSR, // Data Set Ready + MDMDTR = RADIO_DTR, // Data Terminal Ready + MDMRI = RADIO_RI, // Ring Indicator + +} PinName; + +#define ACTIVE_HIGH_POLARITY 1 +#define ACTIVE_LOW_POLARITY 0 + +#define MDM_PIN_POLARITY ACTIVE_HIGH_POLARITY + + +#ifdef __cplusplus +} +#endif + +#endif