Diff: TARGET_NUCLEO_F072RB/stm32f0xx_hal_flash.h

Revision:

108:34e6b704fe68

Parent:

93:e188a91d3eaa

Child:

122:f9eeca106725

--- a/TARGET_NUCLEO_F072RB/stm32f0xx_hal_flash.h	Wed Sep 16 15:32:31 2015 +0100
+++ b/TARGET_NUCLEO_F072RB/stm32f0xx_hal_flash.h	Fri Oct 02 07:35:07 2015 +0200
@@ -2,13 +2,13 @@
   ******************************************************************************
   * @file    stm32f0xx_hal_flash.h
   * @author  MCD Application Team
-  * @version V1.2.0
-  * @date    11-December-2014
+  * @version V1.3.0
+  * @date    26-June-2015
   * @brief   Header file of Flash HAL module.
   ******************************************************************************
   * @attention
   *
-  * <h2><center>&copy; COPYRIGHT(c) 2014 STMicroelectronics</center></h2>
+  * <h2><center>&copy; COPYRIGHT(c) 2015 STMicroelectronics</center></h2>
   *
   * Redistribution and use in source and binary forms, with or without modification,
   * are permitted provided that the following conditions are met:
@@ -45,67 +45,43 @@
 
 /* Includes ------------------------------------------------------------------*/
 #include "stm32f0xx_hal_def.h"
-
+   
 /** @addtogroup STM32F0xx_HAL_Driver
   * @{
   */
 
 /** @addtogroup FLASH
   * @{
-  */ 
+  */
+  
+/** @addtogroup FLASH_Private_Constants
+  * @{
+  */
+#define FLASH_TIMEOUT_VALUE   ((uint32_t)50000)/* 50 s */
+/**
+  * @}
+  */
+
+/** @addtogroup FLASH_Private_Macros
+  * @{
+  */
+
+#define IS_FLASH_TYPEPROGRAM(VALUE)  (((VALUE) == FLASH_TYPEPROGRAM_HALFWORD) || \
+                                      ((VALUE) == FLASH_TYPEPROGRAM_WORD)     || \
+                                      ((VALUE) == FLASH_TYPEPROGRAM_DOUBLEWORD))  
+
+#define IS_FLASH_LATENCY(__LATENCY__) (((__LATENCY__) == FLASH_LATENCY_0) || \
+                                       ((__LATENCY__) == FLASH_LATENCY_1))
+
+/**
+  * @}
+  */  
 
 /* Exported types ------------------------------------------------------------*/ 
-
 /** @defgroup FLASH_Exported_Types FLASH Exported Types
   * @{
   */  
 
-/**
-  * @brief  FLASH Erase structure definition
-  */
-typedef struct
-{
-  uint32_t TypeErase;   /*!< TypeErase: Mass erase or page erase.
-                             This parameter can be a value of @ref FLASH_Type_Erase */
-
-  uint32_t PageAddress; /*!< PageAdress: Initial FLASH page address to erase when mass erase is disabled
-                             This parameter must be a value of @ref FLASHEx_Address */
-  
-  uint32_t NbPages;     /*!< NbPages: Number of pagess to be erased.
-                             This parameter must be a value between 1 and (max number of pages - value of initial page)*/           
-                                                          
-} FLASH_EraseInitTypeDef;
-
-/**
-  * @brief  FLASH Options bytes program structure definition
-  */
-typedef struct
-{
-  uint32_t OptionType;  /*!< OptionType: Option byte to be configured.
-                             This parameter can be a value of @ref FLASH_OB_Type */
-
-  uint32_t WRPState;    /*!< WRPState: Write protection activation or deactivation.
-                             This parameter can be a value of @ref FLASH_OB_WRP_State */
-
-  uint32_t WRPPage;     /*!< WRPSector: specifies the page(s) to be write protected
-                             This parameter can be a value of @ref FLASHEx_OB_Write_Protection */
-
-  uint8_t RDPLevel;     /*!< RDPLevel: Set the read protection level..
-                             This parameter can be a value of @ref FLASH_OB_Read_Protection */
-
-  uint8_t USERConfig;   /*!< USERConfig: Program the FLASH User Option Byte: 
-                             IWDG / STOP / STDBY / BOOT1 / VDDA_ANALOG / SRAM_PARITY
-                             This parameter can be a combination of @ref FLASH_OB_Watchdog, @ref FLASH_OB_nRST_STOP,
-                             @ref FLASH_OB_nRST_STDBY, @ref FLASH_OB_BOOT1, @ref FLASH_OB_VDDA_Analog_Monitoring and
-                             @ref FLASH_OB_RAM_Parity_Check_Enable */
-
-  uint32_t DATAAddress; /*!< DATAAddress: Address of the option byte DATA to be prgrammed
-                             This parameter can be a value of @ref FLASH_OB_Data_Address */
-  
-  uint8_t DATAData;     /*!< DATAData: Data to be stored in the option byte DATA
-                             This parameter can have any value */
-  
-} FLASH_OBProgramInitTypeDef;
 
 /**
   * @brief  FLASH Procedure structure definition
@@ -136,8 +112,7 @@
   HAL_LockTypeDef             Lock;             /*!< FLASH locking object                */
 
   __IO uint32_t               ErrorCode;        /*!< FLASH error code                    
-                                                     This parameter can be a value of @ref FLASH_Error  */
-
+                                                     This parameter can be a value of @ref FLASH_Error_Codes  */
 } FLASH_ProcessTypeDef;
 
 /**
@@ -145,29 +120,18 @@
   */
 
 /* Exported constants --------------------------------------------------------*/
-
 /** @defgroup FLASH_Exported_Constants FLASH Exported Constants
   * @{
   */  
 
-/** @defgroup FLASH_Error FLASH Error
+/** @defgroup FLASH_Error_Codes FLASH Error Codes
   * @{
-  */ 
-#define FLASH_ERROR_NONE      ((uint32_t)0x00000000)
-#define FLASH_ERROR_PG        ((uint32_t)0x00000001)
-#define FLASH_ERROR_WRP       ((uint32_t)0x00000002)
-/**
-  * @}
   */
+ 
+#define HAL_FLASH_ERROR_NONE      ((uint32_t)0x00)
+#define HAL_FLASH_ERROR_PROG      ((uint32_t)0x01)
+#define HAL_FLASH_ERROR_WRP       ((uint32_t)0x02)
 
-/** @defgroup FLASH_Type_Erase FLASH Type Erase
-  * @{
-  */ 
-#define TYPEERASE_PAGES     ((uint32_t)0x00)  /*!<Pages erase only*/
-#define TYPEERASE_MASSERASE ((uint32_t)0x01)  /*!<Flash mass erase activation*/
-
-#define IS_TYPEERASE(VALUE) (((VALUE) == TYPEERASE_PAGES) || \
-                             ((VALUE) == TYPEERASE_MASSERASE))  
 /**
   * @}
   */
@@ -175,38 +139,10 @@
 /** @defgroup FLASH_Type_Program FLASH Type Program
   * @{
   */ 
-#define TYPEPROGRAM_HALFWORD   ((uint32_t)0x01)  /*!<Program a half-word (16-bit) at a specified address.*/
-#define TYPEPROGRAM_WORD       ((uint32_t)0x02)  /*!<Program a word (32-bit) at a specified address.*/
-#define TYPEPROGRAM_DOUBLEWORD ((uint32_t)0x03)  /*!<Program a double word (64-bit) at a specified address*/
-
-#define IS_TYPEPROGRAM(VALUE)  (((VALUE) == TYPEPROGRAM_HALFWORD) || \
-                                ((VALUE) == TYPEPROGRAM_WORD)     || \
-                                ((VALUE) == TYPEPROGRAM_DOUBLEWORD))  
-/**
-  * @}
-  */
+#define FLASH_TYPEPROGRAM_HALFWORD   ((uint32_t)0x01)  /*!<Program a half-word (16-bit) at a specified address.*/
+#define FLASH_TYPEPROGRAM_WORD       ((uint32_t)0x02)  /*!<Program a word (32-bit) at a specified address.*/
+#define FLASH_TYPEPROGRAM_DOUBLEWORD ((uint32_t)0x03)  /*!<Program a double word (64-bit) at a specified address*/
 
-/** @defgroup FLASH_OB_WRP_State FLASH WRP State
-  * @{
-  */ 
-#define WRPSTATE_DISABLE   ((uint32_t)0x00)  /*!<Disable the write protection of the desired pages*/
-#define WRPSTATE_ENABLE    ((uint32_t)0x01)  /*!<Enable the write protection of the desired pagess*/
-
-#define IS_WRPSTATE(VALUE) (((VALUE) == WRPSTATE_DISABLE) || \
-                            ((VALUE) == WRPSTATE_ENABLE))  
-/**
-  * @}
-  */
-
-/** @defgroup FLASH_OB_Type FLASH Option Bytes Type
-  * @{
-  */
-#define OPTIONBYTE_WRP       ((uint32_t)0x01)  /*!<WRP option byte configuration*/
-#define OPTIONBYTE_RDP       ((uint32_t)0x02)  /*!<RDP option byte configuration*/
-#define OPTIONBYTE_USER      ((uint32_t)0x04)  /*!<USER option byte configuration*/
-#define OPTIONBYTE_DATA      ((uint32_t)0x08)  /*!<DATA option byte configuration*/
-
-#define IS_OPTIONBYTE(VALUE) ((VALUE) <= (OPTIONBYTE_WRP | OPTIONBYTE_RDP | OPTIONBYTE_USER | OPTIONBYTE_DATA))
 /**
   * @}
   */
@@ -217,93 +153,10 @@
 #define FLASH_LATENCY_0            ((uint32_t)0x00000000)    /*!< FLASH Zero Latency cycle */
 #define FLASH_LATENCY_1            FLASH_ACR_LATENCY         /*!< FLASH One Latency cycle */
 
-#define IS_FLASH_LATENCY(LATENCY)  (((LATENCY) == FLASH_LATENCY_0) || \
-                                    ((LATENCY) == FLASH_LATENCY_1))
-/**
-  * @}
-  */ 
-  
-/** @defgroup FLASH_OB_Data_Address FLASH OB Data Address
-  * @{
-  */  
-#define IS_OB_DATA_ADDRESS(ADDRESS) (((ADDRESS) == 0x1FFFF804) || ((ADDRESS) == 0x1FFFF806)) 
-/**
-  * @}
-  */
-
-/** @defgroup FLASH_OB_Read_Protection FLASH OB Read Protection
-  * @{
-  */
-#define OB_RDP_LEVEL_0             ((uint8_t)0xAA)
-#define OB_RDP_LEVEL_1             ((uint8_t)0xBB)
-#define OB_RDP_LEVEL_2             ((uint8_t)0xCC) /*!< Warning: When enabling read protection level 2 
-                                                      it's no more possible to go back to level 1 or 0 */
-#define IS_OB_RDP_LEVEL(LEVEL)     (((LEVEL) == OB_RDP_LEVEL_0)   ||\
-                                    ((LEVEL) == OB_RDP_LEVEL_1))/*||\
-                                    ((LEVEL) == OB_RDP_LEVEL_2))*/
-/**
-  * @}
-  */ 
-  
-/** @defgroup FLASH_OB_Watchdog FLASH OB Watchdog
-  * @{
-  */ 
-#define OB_WDG_SW                 ((uint8_t)0x01)  /*!< Software WDG selected */
-#define OB_WDG_HW                 ((uint8_t)0x00)  /*!< Hardware WDG selected */
-#define IS_OB_WDG_SOURCE(SOURCE)  (((SOURCE) == OB_WDG_SW) || ((SOURCE) == OB_WDG_HW))
-/**
-  * @}
-  */ 
-  
-/** @defgroup FLASH_OB_nRST_STOP FLASH OB nRST STOP
-  * @{
-  */ 
-#define OB_STOP_NO_RST             ((uint8_t)0x02) /*!< No reset generated when entering in STOP */
-#define OB_STOP_RST                ((uint8_t)0x00) /*!< Reset generated when entering in STOP */
-#define IS_OB_STOP_SOURCE(SOURCE)  (((SOURCE) == OB_STOP_NO_RST) || ((SOURCE) == OB_STOP_RST))
 /**
   * @}
   */ 
 
-/** @defgroup FLASH_OB_nRST_STDBY FLASH OB nRST STDBY 
-  * @{
-  */ 
-#define OB_STDBY_NO_RST            ((uint8_t)0x04) /*!< No reset generated when entering in STANDBY */
-#define OB_STDBY_RST               ((uint8_t)0x00) /*!< Reset generated when entering in STANDBY */
-#define IS_OB_STDBY_SOURCE(SOURCE) (((SOURCE) == OB_STDBY_NO_RST) || ((SOURCE) == OB_STDBY_RST))
-/**
-  * @}
-  */    
-
-/** @defgroup FLASH_OB_BOOT1 FLASH OB BOOT1
-  * @{
-  */
-#define OB_BOOT1_RESET             ((uint8_t)0x00) /*!< BOOT1 Reset */
-#define OB_BOOT1_SET               ((uint8_t)0x10) /*!< BOOT1 Set */
-#define IS_OB_BOOT1(BOOT1)         (((BOOT1) == OB_BOOT1_RESET) || ((BOOT1) == OB_BOOT1_SET))
-/**
-  * @}
-  */  
-
-/** @defgroup FLASH_OB_VDDA_Analog_Monitoring FLASH OB VDDA Analog Monitoring
-  * @{
-  */
-#define OB_VDDA_ANALOG_ON          ((uint8_t)0x20) /*!< Analog monitoring on VDDA Power source ON */
-#define OB_VDDA_ANALOG_OFF         ((uint8_t)0x00) /*!< Analog monitoring on VDDA Power source OFF */
-#define IS_OB_VDDA_ANALOG(ANALOG)  (((ANALOG) == OB_VDDA_ANALOG_ON) || ((ANALOG) == OB_VDDA_ANALOG_OFF))
-/**
-  * @}
-  */ 
-
-/** @defgroup FLASH_OB_RAM_Parity_Check_Enable FLASH OB RAM Parity Check Enable
-  * @{
-  */
-#define OB_RAM_PARITY_CHECK_SET    ((uint8_t)0x00) /*!< RAM parity check enable set */
-#define OB_RAM_PARITY_CHECK_RESET  ((uint8_t)0x40) /*!< RAM parity check enable reset */
-#define IS_OB_SRAM_PARITY(PARITY)  (((PARITY) == OB_RAM_PARITY_CHECK_SET) || ((PARITY) == OB_RAM_PARITY_CHECK_RESET))
-/**
-  * @}
-  */ 
 
 /** @defgroup FLASH_Flag_definition FLASH Flag definition
   * @{
@@ -325,15 +178,6 @@
   * @}
   */  
 
-/** @defgroup FLASH_Timeout_definition  FLASH Timeout definition
-  * @brief FLASH Timeout definition
-  * @{
-  */ 
-#define HAL_FLASH_TIMEOUT_VALUE   ((uint32_t)50000)/* 50 s */
-/**
-  * @}
-  */  
-
 /**
   * @}
   */  
@@ -344,7 +188,7 @@
  *  @brief macros to control FLASH features 
  *  @{
  */
-
+ 
 /** @defgroup FLASH_Latency FLASH Latency
  *  @brief macros to handle FLASH Latency
  * @{
@@ -357,6 +201,15 @@
   * @retval None
   */ 
 #define __HAL_FLASH_SET_LATENCY(__LATENCY__)    (FLASH->ACR = (FLASH->ACR&(~FLASH_ACR_LATENCY)) | (__LATENCY__))
+
+
+/**
+  * @brief  Get the FLASH Latency.
+  * @retval FLASH Latency                   
+  *          The value of this parameter depend on device used within the same series
+  */ 
+#define __HAL_FLASH_GET_LATENCY()     (READ_BIT((FLASH->ACR), FLASH_ACR_LATENCY))
+
 /**
   * @}
   */
@@ -380,8 +233,8 @@
 /**
   * @}
   */
-
-/** @defgroup FLASH_Interrupt FLASH Interrupt
+  
+/** @defgroup FLASH_Interrupt FLASH Interrupts
  *  @brief macros to handle FLASH interrupts
  * @{
  */ 
@@ -394,7 +247,7 @@
   *     @arg FLASH_IT_ERR: Error Interrupt    
   * @retval none
   */  
-#define __HAL_FLASH_ENABLE_IT(__INTERRUPT__)  (FLASH->CR |= (__INTERRUPT__))
+#define __HAL_FLASH_ENABLE_IT(__INTERRUPT__)  SET_BIT((FLASH->CR), (__INTERRUPT__))
 
 /**
   * @brief  Disable the specified FLASH interrupt.
@@ -404,30 +257,31 @@
   *     @arg FLASH_IT_ERR: Error Interrupt    
   * @retval none
   */  
-#define __HAL_FLASH_DISABLE_IT(__INTERRUPT__)  (FLASH->CR &= ~(uint32_t)(__INTERRUPT__))
+#define __HAL_FLASH_DISABLE_IT(__INTERRUPT__)  CLEAR_BIT((FLASH->CR), (uint32_t)(__INTERRUPT__))
 
 /**
   * @brief  Get the specified FLASH flag status. 
   * @param  __FLAG__: specifies the FLASH flag to check.
   *          This parameter can be one of the following values:
-  *            @arg FLASH_FLAG_EOP   : FLASH End of Operation flag 
-  *            @arg FLASH_FLAG_WRPERR: FLASH Write protected error flag 
-  *            @arg FLASH_FLAG_PGERR : FLASH Programming error flag
-  *            @arg FLASH_FLAG_BSY   : FLASH Busy flag
+  *            @arg FLASH_FLAG_BSY   :      FLASH Busy flag
+  *            @arg FLASH_FLAG_EOP   :      FLASH End of Operation flag 
+  *            @arg FLASH_FLAG_WRPERR:      FLASH Write protected error flag 
+  *            @arg FLASH_FLAG_PGERR :      FLASH Programming error flag
   * @retval The new state of __FLAG__ (SET or RESET).
   */
-#define __HAL_FLASH_GET_FLAG(__FLAG__)          ((FLASH->SR & (__FLAG__)) == (__FLAG__))
+#define __HAL_FLASH_GET_FLAG(__FLAG__)   (((FLASH->SR) & (__FLAG__)) == (__FLAG__))
 
 /**
   * @brief  Clear the specified FLASH flag.
   * @param  __FLAG__: specifies the FLASH flags to clear.
   *          This parameter can be any combination of the following values:
-  *            @arg FLASH_FLAG_EOP   : FLASH End of Operation flag 
-  *            @arg FLASH_FLAG_WRPERR: FLASH Write protected error flag 
-  *            @arg FLASH_FLAG_PGERR : FLASH Programming error flag 
+  *            @arg FLASH_FLAG_BSY   :      FLASH Busy flag
+  *            @arg FLASH_FLAG_EOP   :      FLASH End of Operation flag 
+  *            @arg FLASH_FLAG_WRPERR:      FLASH Write protected error flag 
+  *            @arg FLASH_FLAG_PGERR :      FLASH Programming error flag
   * @retval none
   */
-#define __HAL_FLASH_CLEAR_FLAG(__FLAG__)        (FLASH->SR = (__FLAG__))
+#define __HAL_FLASH_CLEAR_FLAG(__FLAG__)   ((FLASH->SR) = (__FLAG__))
 
 /**
   * @}
@@ -436,56 +290,49 @@
 /**
   * @}
   */ 
-  
-/* Include FLASH HAL Extension module */
+
+/* Include FLASH HAL Extended module */
 #include "stm32f0xx_hal_flash_ex.h"  
 
 /* Exported functions --------------------------------------------------------*/
-
 /** @addtogroup FLASH_Exported_Functions
   * @{
-  */  
-
-/** @addtogroup FLASH_Exported_Functions_Group1 
- *  @brief   Data transfers functions
- * @{
- */
+  */
   
+/** @addtogroup FLASH_Exported_Functions_Group1
+  * @{
+  */
 /* IO operation functions *****************************************************/
-HAL_StatusTypeDef  HAL_FLASH_Program(uint32_t TypeProgram, uint32_t Address, uint64_t Data);
-HAL_StatusTypeDef  HAL_FLASH_Program_IT(uint32_t TypeProgram, uint32_t Address, uint64_t Data);
+HAL_StatusTypeDef HAL_FLASH_Program(uint32_t TypeProgram, uint32_t Address, uint64_t Data);
+HAL_StatusTypeDef HAL_FLASH_Program_IT(uint32_t TypeProgram, uint32_t Address, uint64_t Data);
 
 /* FLASH IRQ handler method */
-void               HAL_FLASH_IRQHandler(void);
+void       HAL_FLASH_IRQHandler(void);
 /* Callbacks in non blocking modes */ 
-void               HAL_FLASH_EndOfOperationCallback(uint32_t ReturnValue);
-void               HAL_FLASH_OperationErrorCallback(uint32_t ReturnValue);
-
-/**
-  * @}
-  */  
-
-/** @addtogroup FLASH_Exported_Functions_Group2 
- *  @brief   management functions 
- * @{
- */
-   
-/* FLASH Memory Programming functions *****************************************/   
-HAL_StatusTypeDef  HAL_FLASH_Unlock(void);
-HAL_StatusTypeDef  HAL_FLASH_Lock(void);
-
-/* Option Bytes Programming functions *****************************************/
-HAL_StatusTypeDef  HAL_FLASH_OB_Unlock(void);
-HAL_StatusTypeDef  HAL_FLASH_OB_Lock(void);
-HAL_StatusTypeDef  HAL_FLASH_OB_Launch(void);
+void       HAL_FLASH_EndOfOperationCallback(uint32_t ReturnValue);
+void       HAL_FLASH_OperationErrorCallback(uint32_t ReturnValue);
 
 /**
   * @}
   */
 
-/** @addtogroup FLASH_Exported_Functions_Group3 
- * @{
- */
+/** @addtogroup FLASH_Exported_Functions_Group2
+  * @{
+  */
+/* Peripheral Control functions ***********************************************/
+HAL_StatusTypeDef HAL_FLASH_Unlock(void);
+HAL_StatusTypeDef HAL_FLASH_Lock(void);
+HAL_StatusTypeDef HAL_FLASH_OB_Unlock(void);
+HAL_StatusTypeDef HAL_FLASH_OB_Lock(void);
+HAL_StatusTypeDef HAL_FLASH_OB_Launch(void);
+
+/**
+  * @}
+  */
+
+/** @addtogroup FLASH_Exported_Functions_Group3
+  * @{
+  */
 /* Peripheral State and Error functions ***************************************/
 uint32_t HAL_FLASH_GetError(void);
 
@@ -497,6 +344,17 @@
   * @}
   */
 
+/* Private function -------------------------------------------------*/
+/** @addtogroup FLASH_Private_Functions
+ * @{
+ */
+void                    FLASH_PageErase(uint32_t PageAddress);
+HAL_StatusTypeDef       FLASH_WaitForLastOperation(uint32_t Timeout);
+
+/**
+  * @}
+  */
+
 /**
   * @}
   */