mbed official / mbed-dev

mbed library sources. Supersedes mbed-src.

Dependents:   Nucleo_Hello_Encoder BLE_iBeaconScan AM1805_DEMO DISCO-F429ZI_ExportTemplate1 ... more

targets/TARGET_STM/TARGET_STM32L0/TARGET_STM32L072xZ/TARGET_DISCO_L072CZ_LRWAN1/PeripheralPins.c@181:57724642e740, 2018-02-16 (annotated)

Committer:
AnnaBridge
Date:
Fri Feb 16 16:09:33 2018 +0000
Revision:
181:57724642e740
Child:
186:707f6e361f3e
mbed-dev library. Release version 159.

Who changed what in which revision?

UserRevisionLine numberNew contents of line
AnnaBridge 181:57724642e740 1 /* mbed Microcontroller Library
AnnaBridge 181:57724642e740 2 *******************************************************************************
AnnaBridge 181:57724642e740 3 * Copyright (c) 2017, STMicroelectronics
AnnaBridge 181:57724642e740 4 * All rights reserved.
AnnaBridge 181:57724642e740 5 *
AnnaBridge 181:57724642e740 6 * Redistribution and use in source and binary forms, with or without
AnnaBridge 181:57724642e740 7 * modification, are permitted provided that the following conditions are met:
AnnaBridge 181:57724642e740 8 *
AnnaBridge 181:57724642e740 9 * 1. Redistributions of source code must retain the above copyright notice,
AnnaBridge 181:57724642e740 10 * this list of conditions and the following disclaimer.
AnnaBridge 181:57724642e740 11 * 2. Redistributions in binary form must reproduce the above copyright notice,
AnnaBridge 181:57724642e740 12 * this list of conditions and the following disclaimer in the documentation
AnnaBridge 181:57724642e740 13 * and/or other materials provided with the distribution.
AnnaBridge 181:57724642e740 14 * 3. Neither the name of STMicroelectronics nor the names of its contributors
AnnaBridge 181:57724642e740 15 * may be used to endorse or promote products derived from this software
AnnaBridge 181:57724642e740 16 * without specific prior written permission.
AnnaBridge 181:57724642e740 17 *
AnnaBridge 181:57724642e740 18 * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
AnnaBridge 181:57724642e740 19 * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
AnnaBridge 181:57724642e740 20 * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
AnnaBridge 181:57724642e740 21 * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
AnnaBridge 181:57724642e740 22 * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
AnnaBridge 181:57724642e740 23 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
AnnaBridge 181:57724642e740 24 * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
AnnaBridge 181:57724642e740 25 * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
AnnaBridge 181:57724642e740 26 * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
AnnaBridge 181:57724642e740 27 * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
AnnaBridge 181:57724642e740 28 *******************************************************************************
AnnaBridge 181:57724642e740 29 */
AnnaBridge 181:57724642e740 30
AnnaBridge 181:57724642e740 31 #include "PeripheralPins.h"
AnnaBridge 181:57724642e740 32 #include "mbed_toolchain.h"
AnnaBridge 181:57724642e740 33
AnnaBridge 181:57724642e740 34 // =====
AnnaBridge 181:57724642e740 35 // Note: Commented lines are alternative possibilities which are not used per default.
AnnaBridge 181:57724642e740 36 // If you change them, you will have also to modify the corresponding xxx_api.c file
AnnaBridge 181:57724642e740 37 // for pwmout, analogin, analogout, ...
AnnaBridge 181:57724642e740 38 // =====
AnnaBridge 181:57724642e740 39
AnnaBridge 181:57724642e740 40 //*** ADC ***
AnnaBridge 181:57724642e740 41
AnnaBridge 181:57724642e740 42 MBED_WEAK const PinMap PinMap_ADC[] = {
AnnaBridge 181:57724642e740 43 {PA_0, ADC_1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 0, 0)}, // ARDUINO A0
AnnaBridge 181:57724642e740 44 {PA_1, ADC_1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 1, 0)}, // Pin not available on any connector
AnnaBridge 181:57724642e740 45 // {PA_2, ADC_1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 2, 0)}, // ARDUINO D1 - Used by STDIO_UART_TX
AnnaBridge 181:57724642e740 46 // {PA_3, ADC_1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 3, 0)}, // ARDUINO D0 - Used by STDIO_UART_RX
AnnaBridge 181:57724642e740 47 {PA_4, ADC_1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 4, 0)}, // ARDUINO A2
AnnaBridge 181:57724642e740 48 {PA_5, ADC_1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 5, 0)}, // CN3.7 - Used also to drive LED2
AnnaBridge 181:57724642e740 49 {PA_6, ADC_1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 6, 0)}, // Pin not available on any connector
AnnaBridge 181:57724642e740 50 {PA_7, ADC_1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 7, 0)}, // Pin not available on any connector
AnnaBridge 181:57724642e740 51 {PB_0, ADC_1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 8, 0)}, // Pin not available on any connector
AnnaBridge 181:57724642e740 52 {PB_1, ADC_1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 9, 0)}, // Pin not available on any connector
AnnaBridge 181:57724642e740 53 {PC_0, ADC_1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 10, 0)}, // Pin not available on any connector
AnnaBridge 181:57724642e740 54 {PC_1, ADC_1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 11, 0)}, // Pin not available on any connector
AnnaBridge 181:57724642e740 55 {PC_2, ADC_1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 12, 0)}, // Pin not available on any connector
AnnaBridge 181:57724642e740 56 {NC, NC, 0}
AnnaBridge 181:57724642e740 57 };
AnnaBridge 181:57724642e740 58
AnnaBridge 181:57724642e740 59 MBED_WEAK const PinMap PinMap_ADC_Internal[] = {
AnnaBridge 181:57724642e740 60 {ADC_TEMP, ADC_1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 17, 0)}, // Internal channel
AnnaBridge 181:57724642e740 61 {ADC_VREF, ADC_1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 0, 0)}, // Internal channel
AnnaBridge 181:57724642e740 62 {ADC_VBAT, ADC_1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 18, 0)}, // Internal channel
AnnaBridge 181:57724642e740 63 {NC, NC, 0}
AnnaBridge 181:57724642e740 64 };
AnnaBridge 181:57724642e740 65
AnnaBridge 181:57724642e740 66 //*** DAC ***
AnnaBridge 181:57724642e740 67
AnnaBridge 181:57724642e740 68 MBED_WEAK const PinMap PinMap_DAC[] = {
AnnaBridge 181:57724642e740 69 {PA_4, DAC_1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 1, 0)}, // ARDUINO A2
AnnaBridge 181:57724642e740 70 {PA_5, DAC_1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 2, 0)}, // CN3.7 - Used also to drive LED2
AnnaBridge 181:57724642e740 71 {NC, NC, 0}
AnnaBridge 181:57724642e740 72 };
AnnaBridge 181:57724642e740 73
AnnaBridge 181:57724642e740 74 //*** I2C ***
AnnaBridge 181:57724642e740 75
AnnaBridge 181:57724642e740 76 MBED_WEAK const PinMap PinMap_I2C_SDA[] = {
AnnaBridge 181:57724642e740 77 {PA_10, I2C_1, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF6_I2C1)}, // ARDUINO D2
AnnaBridge 181:57724642e740 78 {PB_4, I2C_3, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF7_I2C3)}, // Pin not available on any connector
AnnaBridge 181:57724642e740 79 {PB_7, I2C_1, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF1_I2C1)}, // ARDUINO D5 - Used also to drive LED4
AnnaBridge 181:57724642e740 80 {PB_9, I2C_1, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF4_I2C1)}, // ARDUINO D14
AnnaBridge 181:57724642e740 81 {PB_11, I2C_2, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF6_I2C2)}, // Pin not available on any connector
AnnaBridge 181:57724642e740 82 {PB_14, I2C_2, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF5_I2C2)}, // ARDUINO D12
AnnaBridge 181:57724642e740 83 {PC_1, I2C_3, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF7_I2C3)}, // Pin not available on any connector
AnnaBridge 181:57724642e740 84 {NC, NC, 0}
AnnaBridge 181:57724642e740 85 };
AnnaBridge 181:57724642e740 86
AnnaBridge 181:57724642e740 87 MBED_WEAK const PinMap PinMap_I2C_SCL[] = {
AnnaBridge 181:57724642e740 88 {PA_8, I2C_3, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF7_I2C3)}, // ARDUINO D7
AnnaBridge 181:57724642e740 89 {PA_9, I2C_1, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF6_I2C1)}, // ARDUINO D8
AnnaBridge 181:57724642e740 90 {PB_6, I2C_1, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF1_I2C1)}, // ARDUINO D10 - Used also to drive LED3
AnnaBridge 181:57724642e740 91 {PB_8, I2C_1, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF4_I2C1)}, // ARDUINO D15
AnnaBridge 181:57724642e740 92 {PB_10, I2C_2, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF6_I2C2)}, // Pin not available on any connector
AnnaBridge 181:57724642e740 93 {PB_13, I2C_2, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF5_I2C2)}, // ARDUINO D13
AnnaBridge 181:57724642e740 94 {PC_0, I2C_3, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF7_I2C3)}, // Pin not available on any connector
AnnaBridge 181:57724642e740 95 {NC, NC, 0}
AnnaBridge 181:57724642e740 96 };
AnnaBridge 181:57724642e740 97
AnnaBridge 181:57724642e740 98 //*** PWM ***
AnnaBridge 181:57724642e740 99 // Pins using TIM21 cannot be used as TIM21 is already used by ticker.
AnnaBridge 181:57724642e740 100 MBED_WEAK const PinMap PinMap_PWM[] = {
AnnaBridge 181:57724642e740 101 {PA_0, PWM_2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM2, 1, 0)}, // ARDUINO A0
AnnaBridge 181:57724642e740 102 {PA_1, PWM_2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM2, 2, 0)}, // Pin not available on any connector
AnnaBridge 181:57724642e740 103 // {PA_2, PWM_21, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF0_TIM21, 1, 0)}, // ARDUINO D1 - Used by STDIO_UART_TX
AnnaBridge 181:57724642e740 104 // {PA_2, PWM_2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM2, 3, 0)}, // ARDUINO D1 - Used by STDIO_UART_TX
AnnaBridge 181:57724642e740 105 // {PA_3, PWM_21, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF0_TIM21, 2, 0)}, // ARDUINO D0 - Used by STDIO_UART_RX
AnnaBridge 181:57724642e740 106 // {PA_3, PWM_2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM2, 4, 0)}, // ARDUINO D0 - Used by STDIO_UART_RX
AnnaBridge 181:57724642e740 107 {PA_5, PWM_2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_TIM2, 1, 0)}, // CN3.7 - Used also to drive LED2
AnnaBridge 181:57724642e740 108 {PA_6, PWM_3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM3, 1, 0)}, // Pin not available on any connector
AnnaBridge 181:57724642e740 109 {PA_6_ALT0, PWM_22, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_TIM22, 1, 0)}, // Pin not available on any connector
AnnaBridge 181:57724642e740 110 {PA_7, PWM_3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM3, 2, 0)}, // Pin not available on any connector
AnnaBridge 181:57724642e740 111 {PA_7_ALT0, PWM_22, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_TIM22, 2, 0)}, // Pin not available on any connector
AnnaBridge 181:57724642e740 112 {PA_15, PWM_2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_TIM2, 1, 0)}, // Pin not available on any connector
AnnaBridge 181:57724642e740 113 {PB_0, PWM_3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM3, 3, 0)}, // Pin not available on any connector
AnnaBridge 181:57724642e740 114 {PB_1, PWM_3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM3, 4, 0)}, // Pin not available on any connector
AnnaBridge 181:57724642e740 115 {PB_3, PWM_2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM2, 2, 0)}, // Pin not available on any connector
AnnaBridge 181:57724642e740 116 {PB_4, PWM_3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM3, 1, 0)}, // Pin not available on any connector
AnnaBridge 181:57724642e740 117 {PB_4_ALT0, PWM_22, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF4_TIM22, 1, 0)}, // Pin not available on any connector
AnnaBridge 181:57724642e740 118 {PB_5, PWM_22, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF4_TIM22, 2, 0)}, // ARDUINO D4 - Used also to drive LED1
AnnaBridge 181:57724642e740 119 {PB_5_ALT0, PWM_3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF4_TIM3, 2, 0)}, // ARDUINO D4 - Used also to drive LED1
AnnaBridge 181:57724642e740 120 {PB_10, PWM_2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM2, 3, 0)}, // Pin not available on any connector
AnnaBridge 181:57724642e740 121 {PB_11, PWM_2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM2, 4, 0)}, // Pin not available on any connector
AnnaBridge 181:57724642e740 122 // {PB_13, PWM_21, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF6_TIM21, 1, 0)}, // ARDUINO D13 - TIM21 used by ticker
AnnaBridge 181:57724642e740 123 // {PB_14, PWM_21, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF6_TIM21, 2, 0)}, // ARDUINO D12 - TIM21 used by ticker
AnnaBridge 181:57724642e740 124 {NC, NC, 0}
AnnaBridge 181:57724642e740 125 };
AnnaBridge 181:57724642e740 126
AnnaBridge 181:57724642e740 127 //*** SERIAL ***
AnnaBridge 181:57724642e740 128
AnnaBridge 181:57724642e740 129 MBED_WEAK const PinMap PinMap_UART_TX[] = {
AnnaBridge 181:57724642e740 130 {PA_0, UART_4, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF6_USART4)}, // ARDUINO A0
AnnaBridge 181:57724642e740 131 {PA_2, UART_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF4_USART2)}, // ARDUINO D1 - Used by STDIO_UART_TX
AnnaBridge 181:57724642e740 132 // {PA_2, LPUART_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF6_LPUART1)}, // ARDUINO D1 - UART2 is already used by STDIO_UART_TX
AnnaBridge 181:57724642e740 133 {PA_9, UART_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF4_USART1)}, // ARDUINO D8
AnnaBridge 181:57724642e740 134 {PA_14, UART_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF4_USART2)}, // Warning: this pin is used by SWCLK
AnnaBridge 181:57724642e740 135 {PA_14_ALT0, LPUART_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF6_LPUART1)}, // Warning: this pin is used by SWCLK
AnnaBridge 181:57724642e740 136 {PB_3, UART_5, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF6_USART5)}, // Pin not available on any connector
AnnaBridge 181:57724642e740 137 {PB_6, UART_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF0_USART1)}, // ARDUINO D10 - Used also to drive LED3
AnnaBridge 181:57724642e740 138 {PB_10, LPUART_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF4_LPUART1)}, // Pin not available on any connector
AnnaBridge 181:57724642e740 139 {PB_11, LPUART_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_LPUART1)}, // Pin not available on any connector
AnnaBridge 181:57724642e740 140 {PC_1, LPUART_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF6_LPUART1)}, // Pin not available on any connector
AnnaBridge 181:57724642e740 141 {NC, NC, 0}
AnnaBridge 181:57724642e740 142 };
AnnaBridge 181:57724642e740 143
AnnaBridge 181:57724642e740 144 MBED_WEAK const PinMap PinMap_UART_RX[] = {
AnnaBridge 181:57724642e740 145 {PA_1, UART_4, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF6_USART4)}, // Pin not available on any connector
AnnaBridge 181:57724642e740 146 {PA_3, UART_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF4_USART2)}, // ARDUINO D0 - Used by STDIO_UART_RX
AnnaBridge 181:57724642e740 147 // {PA_3, LPUART_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF6_LPUART1)}, // ARDUINO D0 - UART2 is already used by STDIO_UART_RX
AnnaBridge 181:57724642e740 148 {PA_10, UART_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF4_USART1)}, // ARDUINO D2
AnnaBridge 181:57724642e740 149 {PA_13, LPUART_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF6_LPUART1)}, // Warning: this pin is used by SWDIO
AnnaBridge 181:57724642e740 150 {PA_15, UART_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF4_USART2)}, // Pin not available on any connector
AnnaBridge 181:57724642e740 151 {PB_4, UART_5, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF6_USART5)}, // Pin not available on any connector
AnnaBridge 181:57724642e740 152 {PB_7, UART_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF0_USART1)}, // ARDUINO D5 - Used also to drive LED4
AnnaBridge 181:57724642e740 153 {PB_10, LPUART_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_LPUART1)}, // Pin not available on any connector
AnnaBridge 181:57724642e740 154 {PB_11, LPUART_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF4_LPUART1)}, // Pin not available on any connector
AnnaBridge 181:57724642e740 155 {PC_0, LPUART_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF6_LPUART1)}, // Pin not available on any connector
AnnaBridge 181:57724642e740 156 {NC, NC, 0}
AnnaBridge 181:57724642e740 157 };
AnnaBridge 181:57724642e740 158
AnnaBridge 181:57724642e740 159 MBED_WEAK const PinMap PinMap_UART_RTS[] = {
AnnaBridge 181:57724642e740 160 {PA_1, UART_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF4_USART2)}, // Pin not available on any connector
AnnaBridge 181:57724642e740 161 {PA_12, UART_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF4_USART1)}, // CN3.14
AnnaBridge 181:57724642e740 162 {PA_15, UART_4, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF6_USART4)}, // Pin not available on any connector
AnnaBridge 181:57724642e740 163 {PB_1, LPUART_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF4_LPUART1)}, // Pin not available on any connector
AnnaBridge 181:57724642e740 164 {PB_3, UART_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_USART1)}, // Pin not available on any connector
AnnaBridge 181:57724642e740 165 {PB_5, UART_5, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF6_USART5)}, // ARDUINO D4 - Used also to drive LED1
AnnaBridge 181:57724642e740 166 {PB_12, LPUART_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_LPUART1)}, // ARDUINO D9
AnnaBridge 181:57724642e740 167 {PB_14, LPUART_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF4_LPUART1)}, // ARDUINO D12
AnnaBridge 181:57724642e740 168 {NC, NC, 0}
AnnaBridge 181:57724642e740 169 };
AnnaBridge 181:57724642e740 170
AnnaBridge 181:57724642e740 171 MBED_WEAK const PinMap PinMap_UART_CTS[] = {
AnnaBridge 181:57724642e740 172 {PA_0, UART_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF4_USART2)}, // ARDUINO A0
AnnaBridge 181:57724642e740 173 {PA_6, LPUART_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF4_LPUART1)}, // Pin not available on any connector
AnnaBridge 181:57724642e740 174 {PA_11, UART_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF4_USART1)}, // CN3.15
AnnaBridge 181:57724642e740 175 {PB_4, UART_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_USART1)}, // Pin not available on any connector
AnnaBridge 181:57724642e740 176 {PB_7, UART_4, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF6_USART4)}, // ARDUINO D5 - Used also to drive LED4
AnnaBridge 181:57724642e740 177 {PB_13, LPUART_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF4_LPUART1)}, // ARDUINO D13
AnnaBridge 181:57724642e740 178 {NC, NC, 0}
AnnaBridge 181:57724642e740 179 };
AnnaBridge 181:57724642e740 180
AnnaBridge 181:57724642e740 181 //*** SPI ***
AnnaBridge 181:57724642e740 182
AnnaBridge 181:57724642e740 183 MBED_WEAK const PinMap PinMap_SPI_MOSI[] = {
AnnaBridge 181:57724642e740 184 {PA_7, SPI_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF0_SPI1)}, // Pin not available on any connector
AnnaBridge 181:57724642e740 185 {PA_12, SPI_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF0_SPI1)}, // CN3.14
AnnaBridge 181:57724642e740 186 {PB_5, SPI_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF0_SPI1)}, // ARDUINO D4 - Used also to drive LED1
AnnaBridge 181:57724642e740 187 {PB_15, SPI_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF0_SPI2)}, // ARDUINO D11
AnnaBridge 181:57724642e740 188 {NC, NC, 0}
AnnaBridge 181:57724642e740 189 };
AnnaBridge 181:57724642e740 190
AnnaBridge 181:57724642e740 191 MBED_WEAK const PinMap PinMap_SPI_MISO[] = {
AnnaBridge 181:57724642e740 192 {PA_6, SPI_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF0_SPI1)}, // Pin not available on any connector
AnnaBridge 181:57724642e740 193 {PA_11, SPI_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF0_SPI1)}, // CN3.15
AnnaBridge 181:57724642e740 194 {PB_4, SPI_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF0_SPI1)}, // Pin not available on any connector
AnnaBridge 181:57724642e740 195 {PB_14, SPI_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF0_SPI2)}, // ARDUINO D12
AnnaBridge 181:57724642e740 196 {PC_2, SPI_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_SPI2)}, // Pin not available on any connector
AnnaBridge 181:57724642e740 197 {NC, NC, 0}
AnnaBridge 181:57724642e740 198 };
AnnaBridge 181:57724642e740 199
AnnaBridge 181:57724642e740 200 MBED_WEAK const PinMap PinMap_SPI_SCLK[] = {
AnnaBridge 181:57724642e740 201 {PA_5, SPI_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF0_SPI1)}, // CN3.7 - Used also to drive LED2
AnnaBridge 181:57724642e740 202 {PB_3, SPI_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF0_SPI1)}, // Pin not available on any connector
AnnaBridge 181:57724642e740 203 {PB_10, SPI_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI2)}, // Pin not available on any connector
AnnaBridge 181:57724642e740 204 {PB_13, SPI_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF0_SPI2)}, // ARDUINO D13
AnnaBridge 181:57724642e740 205 {NC, NC, 0}
AnnaBridge 181:57724642e740 206 };
AnnaBridge 181:57724642e740 207
AnnaBridge 181:57724642e740 208 MBED_WEAK const PinMap PinMap_SPI_SSEL[] = {
AnnaBridge 181:57724642e740 209 {PA_4, SPI_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF0_SPI1)}, // ARDUINO A2
AnnaBridge 181:57724642e740 210 {PA_15, SPI_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF0_SPI1)}, // Pin not available on any connector
AnnaBridge 181:57724642e740 211 {PB_9, SPI_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI2)}, // ARDUINO D14
AnnaBridge 181:57724642e740 212 {PB_12, SPI_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF0_SPI2)}, // ARDUINO D9
AnnaBridge 181:57724642e740 213 {NC, NC, 0}
AnnaBridge 181:57724642e740 214 };