mbed official / mbed-dev

mbed library sources. Supersedes mbed-src.

Dependents:   Nucleo_Hello_Encoder BLE_iBeaconScan AM1805_DEMO DISCO-F429ZI_ExportTemplate1 ... more

targets/TARGET_STM/TARGET_STM32L0/TARGET_STM32L053x8/TARGET_NUCLEO_L053R8/PeripheralPins.c@189:f392fc9709a3, 2019-02-20 (annotated)

Committer:
AnnaBridge
Date:
Wed Feb 20 22:31:08 2019 +0000
Revision:
189:f392fc9709a3
Parent:
187:0387e8f68319 
mbed library release version 165

Who changed what in which revision?

UserRevisionLine numberNew contents of line
<> 149:156823d33999 1 /* mbed Microcontroller Library
<> 149:156823d33999 2 *******************************************************************************
Anna Bridge 186:707f6e361f3e 3 * Copyright (c) 2018, STMicroelectronics
<> 149:156823d33999 4 * All rights reserved.
<> 149:156823d33999 5 *
<> 149:156823d33999 6 * Redistribution and use in source and binary forms, with or without
<> 149:156823d33999 7 * modification, are permitted provided that the following conditions are met:
<> 149:156823d33999 8 *
<> 149:156823d33999 9 * 1. Redistributions of source code must retain the above copyright notice,
<> 149:156823d33999 10 * this list of conditions and the following disclaimer.
<> 149:156823d33999 11 * 2. Redistributions in binary form must reproduce the above copyright notice,
<> 149:156823d33999 12 * this list of conditions and the following disclaimer in the documentation
<> 149:156823d33999 13 * and/or other materials provided with the distribution.
<> 149:156823d33999 14 * 3. Neither the name of STMicroelectronics nor the names of its contributors
<> 149:156823d33999 15 * may be used to endorse or promote products derived from this software
<> 149:156823d33999 16 * without specific prior written permission.
<> 149:156823d33999 17 *
<> 149:156823d33999 18 * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
<> 149:156823d33999 19 * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
<> 149:156823d33999 20 * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
<> 149:156823d33999 21 * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
<> 149:156823d33999 22 * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
<> 149:156823d33999 23 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
<> 149:156823d33999 24 * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
<> 149:156823d33999 25 * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
<> 149:156823d33999 26 * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
<> 149:156823d33999 27 * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
<> 149:156823d33999 28 *******************************************************************************
<> 149:156823d33999 29 */
<> 149:156823d33999 30
<> 149:156823d33999 31 #include "PeripheralPins.h"
AnnaBridge 181:57724642e740 32 #include "mbed_toolchain.h"
<> 149:156823d33999 33
Anna Bridge 186:707f6e361f3e 34 //==============================================================================
Anna Bridge 186:707f6e361f3e 35 // Notes
Anna Bridge 186:707f6e361f3e 36 //
Anna Bridge 186:707f6e361f3e 37 // - The pins mentioned Px_y_ALTz are alternative possibilities which use other
Anna Bridge 186:707f6e361f3e 38 // HW peripheral instances. You can use them the same way as any other "normal"
Anna Bridge 186:707f6e361f3e 39 // pin (i.e. PwmOut pwm(PA_7_ALT0);). These pins are not displayed on the board
Anna Bridge 186:707f6e361f3e 40 // pinout image on mbed.org.
Anna Bridge 186:707f6e361f3e 41 //
Anna Bridge 186:707f6e361f3e 42 // - The pins which are connected to other components present on the board have
Anna Bridge 186:707f6e361f3e 43 // the comment "Connected to xxx". The pin function may not work properly in this
Anna Bridge 186:707f6e361f3e 44 // case. These pins may not be displayed on the board pinout image on mbed.org.
Anna Bridge 186:707f6e361f3e 45 // Please read the board reference manual and schematic for more information.
Anna Bridge 186:707f6e361f3e 46 //
Anna Bridge 186:707f6e361f3e 47 // - Warning: pins connected to the default STDIO_UART_TX and STDIO_UART_RX pins are commented
Anna Bridge 186:707f6e361f3e 48 // See https://os.mbed.com/teams/ST/wiki/STDIO for more information.
Anna Bridge 186:707f6e361f3e 49 //
Anna Bridge 186:707f6e361f3e 50 //==============================================================================
Anna Bridge 186:707f6e361f3e 51
<> 149:156823d33999 52
<> 149:156823d33999 53 //*** ADC ***
<> 149:156823d33999 54
AnnaBridge 181:57724642e740 55 MBED_WEAK const PinMap PinMap_ADC[] = {
Anna Bridge 186:707f6e361f3e 56 {PA_0, ADC_1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 0, 0)}, // ADC_IN0
Anna Bridge 186:707f6e361f3e 57 {PA_1, ADC_1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 1, 0)}, // ADC_IN1
Anna Bridge 186:707f6e361f3e 58 // {PA_2, ADC_1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 2, 0)}, // ADC_IN2 // Connected to STDIO_UART_TX
Anna Bridge 186:707f6e361f3e 59 // {PA_3, ADC_1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 3, 0)}, // ADC_IN3 // Connected to STDIO_UART_RX
Anna Bridge 186:707f6e361f3e 60 {PA_4, ADC_1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 4, 0)}, // ADC_IN4
Anna Bridge 186:707f6e361f3e 61 {PA_5, ADC_1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 5, 0)}, // ADC_IN5 // Connected to LD2 [Green Led]
Anna Bridge 186:707f6e361f3e 62 {PA_6, ADC_1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 6, 0)}, // ADC_IN6
Anna Bridge 186:707f6e361f3e 63 {PA_7, ADC_1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 7, 0)}, // ADC_IN7
Anna Bridge 186:707f6e361f3e 64 {PB_0, ADC_1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 8, 0)}, // ADC_IN8
Anna Bridge 186:707f6e361f3e 65 {PB_1, ADC_1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 9, 0)}, // ADC_IN9
Anna Bridge 186:707f6e361f3e 66 {PC_0, ADC_1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 10, 0)}, // ADC_IN10
Anna Bridge 186:707f6e361f3e 67 {PC_1, ADC_1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 11, 0)}, // ADC_IN11
Anna Bridge 186:707f6e361f3e 68 {PC_2, ADC_1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 12, 0)}, // ADC_IN12
Anna Bridge 186:707f6e361f3e 69 {PC_3, ADC_1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 13, 0)}, // ADC_IN13
Anna Bridge 186:707f6e361f3e 70 {PC_4, ADC_1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 14, 0)}, // ADC_IN14
Anna Bridge 186:707f6e361f3e 71 {PC_5, ADC_1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 15, 0)}, // ADC_IN15
Anna Bridge 186:707f6e361f3e 72 {NC, NC, 0}
Kojto 169:e3b6fe271b81 73 };
Kojto 169:e3b6fe271b81 74
AnnaBridge 181:57724642e740 75 MBED_WEAK const PinMap PinMap_ADC_Internal[] = {
Anna Bridge 186:707f6e361f3e 76 {ADC_TEMP, ADC_1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 18, 0)},
Anna Bridge 186:707f6e361f3e 77 {ADC_VREF, ADC_1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 17, 0)},
Anna Bridge 186:707f6e361f3e 78 {ADC_VLCD, ADC_1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 16, 0)},
Anna Bridge 186:707f6e361f3e 79 {NC, NC, 0}
<> 149:156823d33999 80 };
<> 149:156823d33999 81
<> 149:156823d33999 82 //*** DAC ***
<> 149:156823d33999 83
AnnaBridge 181:57724642e740 84 MBED_WEAK const PinMap PinMap_DAC[] = {
Anna Bridge 186:707f6e361f3e 85 {PA_4, DAC_1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 1, 0)}, // DAC_OUT1
Anna Bridge 186:707f6e361f3e 86 {NC, NC, 0}
<> 149:156823d33999 87 };
<> 149:156823d33999 88
<> 149:156823d33999 89 //*** I2C ***
<> 149:156823d33999 90
AnnaBridge 181:57724642e740 91 MBED_WEAK const PinMap PinMap_I2C_SDA[] = {
Anna Bridge 186:707f6e361f3e 92 {PB_7, I2C_1, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF1_I2C1)},
Anna Bridge 186:707f6e361f3e 93 {PB_9, I2C_1, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF4_I2C1)},
Anna Bridge 186:707f6e361f3e 94 {PB_11, I2C_2, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF6_I2C2)},
Anna Bridge 186:707f6e361f3e 95 {PB_14, I2C_2, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF5_I2C2)},
Anna Bridge 186:707f6e361f3e 96 {NC, NC, 0}
<> 149:156823d33999 97 };
<> 149:156823d33999 98
AnnaBridge 181:57724642e740 99 MBED_WEAK const PinMap PinMap_I2C_SCL[] = {
Anna Bridge 186:707f6e361f3e 100 {PB_6, I2C_1, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF1_I2C1)},
Anna Bridge 186:707f6e361f3e 101 {PB_8, I2C_1, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF4_I2C1)},
Anna Bridge 186:707f6e361f3e 102 {PB_10, I2C_2, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF6_I2C2)},
Anna Bridge 186:707f6e361f3e 103 {PB_13, I2C_2, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF5_I2C2)},
Anna Bridge 186:707f6e361f3e 104 {NC, NC, 0}
<> 149:156823d33999 105 };
<> 149:156823d33999 106
<> 149:156823d33999 107 //*** PWM ***
<> 149:156823d33999 108
<> 149:156823d33999 109 // TIM21 cannot be used because already used by the us_ticker
AnnaBridge 181:57724642e740 110 MBED_WEAK const PinMap PinMap_PWM[] = {
Anna Bridge 186:707f6e361f3e 111 {PA_0, PWM_2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM2, 1, 0)}, // TIM2_CH1
Anna Bridge 186:707f6e361f3e 112 {PA_1, PWM_2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM2, 2, 0)}, // TIM2_CH2
Anna Bridge 186:707f6e361f3e 113 // {PA_2, PWM_2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM2, 3, 0)}, // TIM2_CH3 // Connected to STDIO_UART_TX
Anna Bridge 186:707f6e361f3e 114 // {PA_2, PWM_21, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF0_TIM21, 1, 0)}, // TIM21_CH1 // Connected to STDIO_UART_TX
Anna Bridge 186:707f6e361f3e 115 // {PA_3, PWM_2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM2, 4, 0)}, // TIM2_CH4 // Connected to STDIO_UART_RX
Anna Bridge 186:707f6e361f3e 116 // {PA_3, PWM_21, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF0_TIM21, 2, 0)}, // TIM21_CH2 // Connected to STDIO_UART_RX
Anna Bridge 186:707f6e361f3e 117 {PA_5, PWM_2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_TIM2, 1, 0)}, // TIM2_CH1 // Connected to LD2 [Green Led]
Anna Bridge 186:707f6e361f3e 118 {PA_6, PWM_22, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_TIM22, 1, 0)}, // TIM22_CH1
Anna Bridge 186:707f6e361f3e 119 {PA_7, PWM_22, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_TIM22, 2, 0)}, // TIM22_CH2
Anna Bridge 186:707f6e361f3e 120 {PA_15, PWM_2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_TIM2, 1, 0)}, // TIM2_CH1
Anna Bridge 186:707f6e361f3e 121 {PB_3, PWM_2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM2, 2, 0)}, // TIM2_CH2
Anna Bridge 186:707f6e361f3e 122 {PB_4, PWM_22, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF4_TIM22, 1, 0)}, // TIM22_CH1
Anna Bridge 186:707f6e361f3e 123 {PB_5, PWM_22, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF4_TIM22, 2, 0)}, // TIM22_CH2
Anna Bridge 186:707f6e361f3e 124 {PB_10, PWM_2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM2, 3, 0)}, // TIM2_CH3
Anna Bridge 186:707f6e361f3e 125 {PB_11, PWM_2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM2, 4, 0)}, // TIM2_CH4
Anna Bridge 186:707f6e361f3e 126 // {PB_13, PWM_21, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF6_TIM21, 1, 0)}, // TIM21_CH1
Anna Bridge 186:707f6e361f3e 127 // {PB_14, PWM_21, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF6_TIM21, 2, 0)}, // TIM21_CH2
Anna Bridge 186:707f6e361f3e 128 {PC_6, PWM_22, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF0_TIM22, 1, 0)}, // TIM22_CH1
Anna Bridge 186:707f6e361f3e 129 {PC_7, PWM_22, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF0_TIM22, 2, 0)}, // TIM22_CH2
Anna Bridge 186:707f6e361f3e 130 {NC, NC, 0}
<> 149:156823d33999 131 };
<> 149:156823d33999 132
<> 149:156823d33999 133 //*** SERIAL ***
<> 149:156823d33999 134
AnnaBridge 181:57724642e740 135 MBED_WEAK const PinMap PinMap_UART_TX[] = {
Anna Bridge 186:707f6e361f3e 136 {PA_2, UART_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF4_USART2)}, // Connected to STDIO_UART_TX
Anna Bridge 186:707f6e361f3e 137 {PA_9, UART_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF4_USART1)},
Anna Bridge 186:707f6e361f3e 138 {PA_14, UART_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF4_USART2)}, // Connected to TCK
Anna Bridge 186:707f6e361f3e 139 {PB_6, UART_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF0_USART1)},
AnnaBridge 187:0387e8f68319 140 {PB_10, LPUART_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF4_LPUART1)},
AnnaBridge 187:0387e8f68319 141 {PC_4, LPUART_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_LPUART1)},
AnnaBridge 187:0387e8f68319 142 {PC_10, LPUART_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF0_LPUART1)},
Anna Bridge 186:707f6e361f3e 143 {NC, NC, 0}
<> 149:156823d33999 144 };
<> 149:156823d33999 145
AnnaBridge 181:57724642e740 146 MBED_WEAK const PinMap PinMap_UART_RX[] = {
Anna Bridge 186:707f6e361f3e 147 {PA_3, UART_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF4_USART2)}, // Connected to STDIO_UART_RX
Anna Bridge 186:707f6e361f3e 148 {PA_10, UART_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF4_USART1)},
Anna Bridge 186:707f6e361f3e 149 {PA_15, UART_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF4_USART2)},
Anna Bridge 186:707f6e361f3e 150 {PB_7, UART_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF0_USART1)},
AnnaBridge 187:0387e8f68319 151 {PB_11, LPUART_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF4_LPUART1)},
AnnaBridge 187:0387e8f68319 152 {PC_5, LPUART_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_LPUART1)},
AnnaBridge 187:0387e8f68319 153 {PC_11, LPUART_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF0_LPUART1)},
Anna Bridge 186:707f6e361f3e 154 {NC, NC, 0}
<> 149:156823d33999 155 };
<> 149:156823d33999 156
AnnaBridge 181:57724642e740 157 MBED_WEAK const PinMap PinMap_UART_RTS[] = {
Anna Bridge 186:707f6e361f3e 158 {PA_1, UART_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF4_USART2)},
Anna Bridge 186:707f6e361f3e 159 {PA_12, UART_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF4_USART1)},
AnnaBridge 187:0387e8f68319 160 {PB_1, LPUART_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF4_LPUART1)},
AnnaBridge 187:0387e8f68319 161 {PB_12, LPUART_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_LPUART1)},
AnnaBridge 187:0387e8f68319 162 {PB_14, LPUART_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF4_LPUART1)},
AnnaBridge 187:0387e8f68319 163 {PD_2, LPUART_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF0_LPUART1)},
Anna Bridge 186:707f6e361f3e 164 {NC, NC, 0}
<> 149:156823d33999 165 };
<> 149:156823d33999 166
AnnaBridge 181:57724642e740 167 MBED_WEAK const PinMap PinMap_UART_CTS[] = {
Anna Bridge 186:707f6e361f3e 168 {PA_0, UART_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF4_USART2)},
AnnaBridge 187:0387e8f68319 169 {PA_6, LPUART_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF4_LPUART1)},
Anna Bridge 186:707f6e361f3e 170 {PA_11, UART_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF4_USART1)},
AnnaBridge 187:0387e8f68319 171 {PB_13, LPUART_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF4_LPUART1)},
Anna Bridge 186:707f6e361f3e 172 {NC, NC, 0}
<> 149:156823d33999 173 };
<> 149:156823d33999 174
<> 149:156823d33999 175 //*** SPI ***
<> 149:156823d33999 176
AnnaBridge 181:57724642e740 177 MBED_WEAK const PinMap PinMap_SPI_MOSI[] = {
Anna Bridge 186:707f6e361f3e 178 {PA_7, SPI_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF0_SPI1)},
Anna Bridge 186:707f6e361f3e 179 {PA_12, SPI_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF0_SPI1)},
Anna Bridge 186:707f6e361f3e 180 {PB_5, SPI_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF0_SPI1)},
Anna Bridge 186:707f6e361f3e 181 {PB_15, SPI_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF0_SPI2)},
Anna Bridge 186:707f6e361f3e 182 {PC_3, SPI_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF2_SPI2)},
Anna Bridge 186:707f6e361f3e 183 {NC, NC, 0}
<> 149:156823d33999 184 };
<> 149:156823d33999 185
AnnaBridge 181:57724642e740 186 MBED_WEAK const PinMap PinMap_SPI_MISO[] = {
Anna Bridge 186:707f6e361f3e 187 {PA_6, SPI_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF0_SPI1)},
Anna Bridge 186:707f6e361f3e 188 {PA_11, SPI_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF0_SPI1)},
Anna Bridge 186:707f6e361f3e 189 {PB_4, SPI_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF0_SPI1)},
Anna Bridge 186:707f6e361f3e 190 {PB_14, SPI_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF0_SPI2)},
Anna Bridge 186:707f6e361f3e 191 {PC_2, SPI_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF2_SPI2)},
Anna Bridge 186:707f6e361f3e 192 {NC, NC, 0}
<> 149:156823d33999 193 };
<> 149:156823d33999 194
AnnaBridge 181:57724642e740 195 MBED_WEAK const PinMap PinMap_SPI_SCLK[] = {
Anna Bridge 186:707f6e361f3e 196 {PA_5, SPI_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF0_SPI1)}, // Connected to LD2 [Green Led]
Anna Bridge 186:707f6e361f3e 197 {PB_3, SPI_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF0_SPI1)},
Anna Bridge 186:707f6e361f3e 198 {PB_10, SPI_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF5_SPI2)},
Anna Bridge 186:707f6e361f3e 199 {PB_13, SPI_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF0_SPI2)},
Anna Bridge 186:707f6e361f3e 200 {NC, NC, 0}
<> 149:156823d33999 201 };
<> 149:156823d33999 202
AnnaBridge 181:57724642e740 203 MBED_WEAK const PinMap PinMap_SPI_SSEL[] = {
Anna Bridge 186:707f6e361f3e 204 {PA_4, SPI_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF0_SPI1)},
Anna Bridge 186:707f6e361f3e 205 {PA_15, SPI_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF0_SPI1)},
Anna Bridge 186:707f6e361f3e 206 {PB_9, SPI_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF5_SPI2)},
Anna Bridge 186:707f6e361f3e 207 {PB_12, SPI_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF0_SPI2)},
Anna Bridge 186:707f6e361f3e 208 {NC, NC, 0}
<> 149:156823d33999 209 };