mbed official / mbed-dev

mbed library sources. Supersedes mbed-src.

Dependents:   Nucleo_Hello_Encoder BLE_iBeaconScan AM1805_DEMO DISCO-F429ZI_ExportTemplate1 ... more

targets/TARGET_STM/TARGET_STM32L0/TARGET_DISCO_L072CZ_LRWAN1/PeripheralPins.c@177:d650f5d4c87a, 2017-11-08 (annotated)

Committer:
AnnaBridge
Date:
Wed Nov 08 13:50:44 2017 +0000
Revision:
177:d650f5d4c87a
Parent:
165:e614a9f1c9e2 
This updates the lib to the mbed lib v 155

Who changed what in which revision?

UserRevisionLine numberNew contents of line
AnnaBridge 165:e614a9f1c9e2 1 /* mbed Microcontroller Library
AnnaBridge 165:e614a9f1c9e2 2 *******************************************************************************
AnnaBridge 165:e614a9f1c9e2 3 * Copyright (c) 2017, STMicroelectronics
AnnaBridge 165:e614a9f1c9e2 4 * All rights reserved.
AnnaBridge 165:e614a9f1c9e2 5 *
AnnaBridge 165:e614a9f1c9e2 6 * Redistribution and use in source and binary forms, with or without
AnnaBridge 165:e614a9f1c9e2 7 * modification, are permitted provided that the following conditions are met:
AnnaBridge 165:e614a9f1c9e2 8 *
AnnaBridge 165:e614a9f1c9e2 9 * 1. Redistributions of source code must retain the above copyright notice,
AnnaBridge 165:e614a9f1c9e2 10 * this list of conditions and the following disclaimer.
AnnaBridge 165:e614a9f1c9e2 11 * 2. Redistributions in binary form must reproduce the above copyright notice,
AnnaBridge 165:e614a9f1c9e2 12 * this list of conditions and the following disclaimer in the documentation
AnnaBridge 165:e614a9f1c9e2 13 * and/or other materials provided with the distribution.
AnnaBridge 165:e614a9f1c9e2 14 * 3. Neither the name of STMicroelectronics nor the names of its contributors
AnnaBridge 165:e614a9f1c9e2 15 * may be used to endorse or promote products derived from this software
AnnaBridge 165:e614a9f1c9e2 16 * without specific prior written permission.
AnnaBridge 165:e614a9f1c9e2 17 *
AnnaBridge 165:e614a9f1c9e2 18 * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
AnnaBridge 165:e614a9f1c9e2 19 * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
AnnaBridge 165:e614a9f1c9e2 20 * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
AnnaBridge 165:e614a9f1c9e2 21 * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
AnnaBridge 165:e614a9f1c9e2 22 * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
AnnaBridge 165:e614a9f1c9e2 23 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
AnnaBridge 165:e614a9f1c9e2 24 * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
AnnaBridge 165:e614a9f1c9e2 25 * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
AnnaBridge 165:e614a9f1c9e2 26 * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
AnnaBridge 165:e614a9f1c9e2 27 * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
AnnaBridge 165:e614a9f1c9e2 28 *******************************************************************************
AnnaBridge 165:e614a9f1c9e2 29 */
AnnaBridge 165:e614a9f1c9e2 30
AnnaBridge 165:e614a9f1c9e2 31 #include "PeripheralPins.h"
AnnaBridge 165:e614a9f1c9e2 32
AnnaBridge 165:e614a9f1c9e2 33 // =====
AnnaBridge 165:e614a9f1c9e2 34 // Note: Commented lines are alternative possibilities which are not used per default.
AnnaBridge 165:e614a9f1c9e2 35 // If you change them, you will have also to modify the corresponding xxx_api.c file
AnnaBridge 165:e614a9f1c9e2 36 // for pwmout, analogin, analogout, ...
AnnaBridge 165:e614a9f1c9e2 37 // =====
AnnaBridge 165:e614a9f1c9e2 38
AnnaBridge 165:e614a9f1c9e2 39 //*** ADC ***
AnnaBridge 165:e614a9f1c9e2 40
AnnaBridge 165:e614a9f1c9e2 41 const PinMap PinMap_ADC[] = {
AnnaBridge 165:e614a9f1c9e2 42 {PA_0, ADC_1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 0, 0)}, // ARDUINO A0
AnnaBridge 165:e614a9f1c9e2 43 {PA_1, ADC_1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 1, 0)}, // Pin not available on any connector
AnnaBridge 165:e614a9f1c9e2 44 // {PA_2, ADC_1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 2, 0)}, // ARDUINO D1 - Used by STDIO_UART_TX
AnnaBridge 165:e614a9f1c9e2 45 // {PA_3, ADC_1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 3, 0)}, // ARDUINO D0 - Used by STDIO_UART_RX
AnnaBridge 165:e614a9f1c9e2 46 {PA_4, ADC_1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 4, 0)}, // ARDUINO A2
AnnaBridge 165:e614a9f1c9e2 47 {PA_5, ADC_1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 5, 0)}, // CN3.7 - Used also to drive LED2
AnnaBridge 165:e614a9f1c9e2 48 {PA_6, ADC_1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 6, 0)}, // Pin not available on any connector
AnnaBridge 165:e614a9f1c9e2 49 {PA_7, ADC_1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 7, 0)}, // Pin not available on any connector
AnnaBridge 165:e614a9f1c9e2 50 {PB_0, ADC_1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 8, 0)}, // Pin not available on any connector
AnnaBridge 165:e614a9f1c9e2 51 {PB_1, ADC_1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 9, 0)}, // Pin not available on any connector
AnnaBridge 165:e614a9f1c9e2 52 {PC_0, ADC_1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 10, 0)}, // Pin not available on any connector
AnnaBridge 165:e614a9f1c9e2 53 {PC_1, ADC_1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 11, 0)}, // Pin not available on any connector
AnnaBridge 165:e614a9f1c9e2 54 {PC_2, ADC_1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 12, 0)}, // Pin not available on any connector
AnnaBridge 165:e614a9f1c9e2 55 {NC, NC, 0}
AnnaBridge 165:e614a9f1c9e2 56 };
AnnaBridge 165:e614a9f1c9e2 57
AnnaBridge 165:e614a9f1c9e2 58 const PinMap PinMap_ADC_Internal[] = {
AnnaBridge 165:e614a9f1c9e2 59 {ADC_TEMP, ADC_1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 17, 0)}, // Internal channel
AnnaBridge 165:e614a9f1c9e2 60 {ADC_VREF, ADC_1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 0, 0)}, // Internal channel
AnnaBridge 165:e614a9f1c9e2 61 {ADC_VBAT, ADC_1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 18, 0)}, // Internal channel
AnnaBridge 165:e614a9f1c9e2 62 {NC, NC, 0}
AnnaBridge 165:e614a9f1c9e2 63 };
AnnaBridge 165:e614a9f1c9e2 64
AnnaBridge 165:e614a9f1c9e2 65 //*** DAC ***
AnnaBridge 165:e614a9f1c9e2 66
AnnaBridge 165:e614a9f1c9e2 67 const PinMap PinMap_DAC[] = {
AnnaBridge 165:e614a9f1c9e2 68 {PA_4, DAC_1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 1, 0)}, // ARDUINO A2
AnnaBridge 165:e614a9f1c9e2 69 {PA_5, DAC_1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 2, 0)}, // CN3.7 - Used also to drive LED2
AnnaBridge 165:e614a9f1c9e2 70 {NC, NC, 0}
AnnaBridge 165:e614a9f1c9e2 71 };
AnnaBridge 165:e614a9f1c9e2 72
AnnaBridge 165:e614a9f1c9e2 73 //*** I2C ***
AnnaBridge 165:e614a9f1c9e2 74
AnnaBridge 165:e614a9f1c9e2 75 const PinMap PinMap_I2C_SDA[] = {
AnnaBridge 165:e614a9f1c9e2 76 {PA_10, I2C_1, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF6_I2C1)}, // ARDUINO D2
AnnaBridge 165:e614a9f1c9e2 77 {PB_4, I2C_3, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF7_I2C3)}, // Pin not available on any connector
AnnaBridge 165:e614a9f1c9e2 78 {PB_7, I2C_1, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF1_I2C1)}, // ARDUINO D5 - Used also to drive LED4
AnnaBridge 165:e614a9f1c9e2 79 {PB_9, I2C_1, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF4_I2C1)}, // ARDUINO D14
AnnaBridge 165:e614a9f1c9e2 80 {PB_11, I2C_2, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF6_I2C2)}, // Pin not available on any connector
AnnaBridge 165:e614a9f1c9e2 81 {PB_14, I2C_2, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF5_I2C2)}, // ARDUINO D12
AnnaBridge 165:e614a9f1c9e2 82 {PC_1, I2C_3, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF7_I2C3)}, // Pin not available on any connector
AnnaBridge 165:e614a9f1c9e2 83 {NC, NC, 0}
AnnaBridge 165:e614a9f1c9e2 84 };
AnnaBridge 165:e614a9f1c9e2 85
AnnaBridge 165:e614a9f1c9e2 86 const PinMap PinMap_I2C_SCL[] = {
AnnaBridge 165:e614a9f1c9e2 87 {PA_8, I2C_3, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF7_I2C3)}, // ARDUINO D7
AnnaBridge 165:e614a9f1c9e2 88 {PA_9, I2C_1, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF6_I2C1)}, // ARDUINO D8
AnnaBridge 165:e614a9f1c9e2 89 {PB_6, I2C_1, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF1_I2C1)}, // ARDUINO D10 - Used also to drive LED3
AnnaBridge 165:e614a9f1c9e2 90 {PB_8, I2C_1, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF4_I2C1)}, // ARDUINO D15
AnnaBridge 165:e614a9f1c9e2 91 {PB_10, I2C_2, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF6_I2C2)}, // Pin not available on any connector
AnnaBridge 165:e614a9f1c9e2 92 {PB_13, I2C_2, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF5_I2C2)}, // ARDUINO D13
AnnaBridge 165:e614a9f1c9e2 93 {PC_0, I2C_3, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF7_I2C3)}, // Pin not available on any connector
AnnaBridge 165:e614a9f1c9e2 94 {NC, NC, 0}
AnnaBridge 165:e614a9f1c9e2 95 };
AnnaBridge 165:e614a9f1c9e2 96
AnnaBridge 165:e614a9f1c9e2 97 //*** PWM ***
AnnaBridge 165:e614a9f1c9e2 98 // Pins using TIM21 cannot be used as TIM21 is already used by ticker.
AnnaBridge 165:e614a9f1c9e2 99 const PinMap PinMap_PWM[] = {
AnnaBridge 165:e614a9f1c9e2 100 {PA_0, PWM_2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM2, 1, 0)}, // ARDUINO A0
AnnaBridge 165:e614a9f1c9e2 101 {PA_1, PWM_2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM2, 2, 0)}, // Pin not available on any connector
AnnaBridge 165:e614a9f1c9e2 102 // {PA_2, PWM_21, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF0_TIM21, 1, 0)}, // ARDUINO D1 - Used by STDIO_UART_TX
AnnaBridge 165:e614a9f1c9e2 103 // {PA_2, PWM_2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM2, 3, 0)}, // ARDUINO D1 - Used by STDIO_UART_TX
AnnaBridge 165:e614a9f1c9e2 104 // {PA_3, PWM_21, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF0_TIM21, 2, 0)}, // ARDUINO D0 - Used by STDIO_UART_RX
AnnaBridge 165:e614a9f1c9e2 105 // {PA_3, PWM_2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM2, 4, 0)}, // ARDUINO D0 - Used by STDIO_UART_RX
AnnaBridge 165:e614a9f1c9e2 106 {PA_5, PWM_2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_TIM2, 1, 0)}, // CN3.7 - Used also to drive LED2
AnnaBridge 165:e614a9f1c9e2 107 {PA_6, PWM_3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM3, 1, 0)}, // Pin not available on any connector
AnnaBridge 165:e614a9f1c9e2 108 {PA_6_ALT0, PWM_22, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_TIM22, 1, 0)}, // Pin not available on any connector
AnnaBridge 165:e614a9f1c9e2 109 {PA_7, PWM_3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM3, 2, 0)}, // Pin not available on any connector
AnnaBridge 165:e614a9f1c9e2 110 {PA_7_ALT0, PWM_22, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_TIM22, 2, 0)}, // Pin not available on any connector
AnnaBridge 165:e614a9f1c9e2 111 {PA_15, PWM_2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_TIM2, 1, 0)}, // Pin not available on any connector
AnnaBridge 165:e614a9f1c9e2 112 {PB_0, PWM_3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM3, 3, 0)}, // Pin not available on any connector
AnnaBridge 165:e614a9f1c9e2 113 {PB_1, PWM_3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM3, 4, 0)}, // Pin not available on any connector
AnnaBridge 165:e614a9f1c9e2 114 {PB_3, PWM_2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM2, 2, 0)}, // Pin not available on any connector
AnnaBridge 165:e614a9f1c9e2 115 {PB_4, PWM_3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM3, 1, 0)}, // Pin not available on any connector
AnnaBridge 165:e614a9f1c9e2 116 {PB_4_ALT0, PWM_22, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF4_TIM22, 1, 0)}, // Pin not available on any connector
AnnaBridge 165:e614a9f1c9e2 117 {PB_5, PWM_22, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF4_TIM22, 2, 0)}, // ARDUINO D4 - Used also to drive LED1
AnnaBridge 165:e614a9f1c9e2 118 {PB_5_ALT0, PWM_3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF4_TIM3, 2, 0)}, // ARDUINO D4 - Used also to drive LED1
AnnaBridge 165:e614a9f1c9e2 119 {PB_10, PWM_2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM2, 3, 0)}, // Pin not available on any connector
AnnaBridge 165:e614a9f1c9e2 120 {PB_11, PWM_2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM2, 4, 0)}, // Pin not available on any connector
AnnaBridge 165:e614a9f1c9e2 121 // {PB_13, PWM_21, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF6_TIM21, 1, 0)}, // ARDUINO D13 - TIM21 used by ticker
AnnaBridge 165:e614a9f1c9e2 122 // {PB_14, PWM_21, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF6_TIM21, 2, 0)}, // ARDUINO D12 - TIM21 used by ticker
AnnaBridge 165:e614a9f1c9e2 123 {NC, NC, 0}
AnnaBridge 165:e614a9f1c9e2 124 };
AnnaBridge 165:e614a9f1c9e2 125
AnnaBridge 165:e614a9f1c9e2 126 //*** SERIAL ***
AnnaBridge 165:e614a9f1c9e2 127
AnnaBridge 165:e614a9f1c9e2 128 const PinMap PinMap_UART_TX[] = {
AnnaBridge 165:e614a9f1c9e2 129 {PA_0, UART_4, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF6_USART4)}, // ARDUINO A0
AnnaBridge 165:e614a9f1c9e2 130 {PA_2, UART_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF4_USART2)}, // ARDUINO D1 - Used by STDIO_UART_TX
AnnaBridge 165:e614a9f1c9e2 131 // {PA_2, LPUART_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF6_LPUART1)}, // ARDUINO D1 - UART2 is already used by STDIO_UART_TX
AnnaBridge 165:e614a9f1c9e2 132 {PA_9, UART_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF4_USART1)}, // ARDUINO D8
AnnaBridge 165:e614a9f1c9e2 133 {PA_14, UART_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF4_USART2)}, // Warning: this pin is used by SWCLK
AnnaBridge 165:e614a9f1c9e2 134 {PA_14_ALT0, LPUART_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF6_LPUART1)}, // Warning: this pin is used by SWCLK
AnnaBridge 165:e614a9f1c9e2 135 {PB_3, UART_5, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF6_USART5)}, // Pin not available on any connector
AnnaBridge 165:e614a9f1c9e2 136 {PB_6, UART_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF0_USART1)}, // ARDUINO D10 - Used also to drive LED3
AnnaBridge 165:e614a9f1c9e2 137 {PB_10, LPUART_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF4_LPUART1)}, // Pin not available on any connector
AnnaBridge 165:e614a9f1c9e2 138 {PB_11, LPUART_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_LPUART1)}, // Pin not available on any connector
AnnaBridge 165:e614a9f1c9e2 139 {PC_1, LPUART_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF6_LPUART1)}, // Pin not available on any connector
AnnaBridge 165:e614a9f1c9e2 140 {NC, NC, 0}
AnnaBridge 165:e614a9f1c9e2 141 };
AnnaBridge 165:e614a9f1c9e2 142
AnnaBridge 165:e614a9f1c9e2 143 const PinMap PinMap_UART_RX[] = {
AnnaBridge 165:e614a9f1c9e2 144 {PA_1, UART_4, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF6_USART4)}, // Pin not available on any connector
AnnaBridge 165:e614a9f1c9e2 145 {PA_3, UART_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF4_USART2)}, // ARDUINO D0 - Used by STDIO_UART_RX
AnnaBridge 165:e614a9f1c9e2 146 // {PA_3, LPUART_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF6_LPUART1)}, // ARDUINO D0 - UART2 is already used by STDIO_UART_RX
AnnaBridge 165:e614a9f1c9e2 147 {PA_10, UART_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF4_USART1)}, // ARDUINO D2
AnnaBridge 165:e614a9f1c9e2 148 {PA_13, LPUART_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF6_LPUART1)}, // Warning: this pin is used by SWDIO
AnnaBridge 165:e614a9f1c9e2 149 {PA_15, UART_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF4_USART2)}, // Pin not available on any connector
AnnaBridge 165:e614a9f1c9e2 150 {PB_4, UART_5, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF6_USART5)}, // Pin not available on any connector
AnnaBridge 165:e614a9f1c9e2 151 {PB_7, UART_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF0_USART1)}, // ARDUINO D5 - Used also to drive LED4
AnnaBridge 165:e614a9f1c9e2 152 {PB_10, LPUART_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_LPUART1)}, // Pin not available on any connector
AnnaBridge 165:e614a9f1c9e2 153 {PB_11, LPUART_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF4_LPUART1)}, // Pin not available on any connector
AnnaBridge 165:e614a9f1c9e2 154 {PC_0, LPUART_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF6_LPUART1)}, // Pin not available on any connector
AnnaBridge 165:e614a9f1c9e2 155 {NC, NC, 0}
AnnaBridge 165:e614a9f1c9e2 156 };
AnnaBridge 165:e614a9f1c9e2 157
AnnaBridge 165:e614a9f1c9e2 158 const PinMap PinMap_UART_RTS[] = {
AnnaBridge 165:e614a9f1c9e2 159 {PA_1, UART_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF4_USART2)}, // Pin not available on any connector
AnnaBridge 165:e614a9f1c9e2 160 {PA_12, UART_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF4_USART1)}, // CN3.14
AnnaBridge 165:e614a9f1c9e2 161 {PA_15, UART_4, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF6_USART4)}, // Pin not available on any connector
AnnaBridge 165:e614a9f1c9e2 162 {PB_1, LPUART_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF4_LPUART1)}, // Pin not available on any connector
AnnaBridge 165:e614a9f1c9e2 163 {PB_3, UART_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_USART1)}, // Pin not available on any connector
AnnaBridge 165:e614a9f1c9e2 164 {PB_5, UART_5, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF6_USART5)}, // ARDUINO D4 - Used also to drive LED1
AnnaBridge 165:e614a9f1c9e2 165 {PB_12, LPUART_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_LPUART1)}, // ARDUINO D9
AnnaBridge 165:e614a9f1c9e2 166 {PB_14, LPUART_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF4_LPUART1)}, // ARDUINO D12
AnnaBridge 165:e614a9f1c9e2 167 {NC, NC, 0}
AnnaBridge 165:e614a9f1c9e2 168 };
AnnaBridge 165:e614a9f1c9e2 169
AnnaBridge 165:e614a9f1c9e2 170 const PinMap PinMap_UART_CTS[] = {
AnnaBridge 165:e614a9f1c9e2 171 {PA_0, UART_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF4_USART2)}, // ARDUINO A0
AnnaBridge 165:e614a9f1c9e2 172 {PA_6, LPUART_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF4_LPUART1)}, // Pin not available on any connector
AnnaBridge 165:e614a9f1c9e2 173 {PA_11, UART_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF4_USART1)}, // CN3.15
AnnaBridge 165:e614a9f1c9e2 174 {PB_4, UART_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_USART1)}, // Pin not available on any connector
AnnaBridge 165:e614a9f1c9e2 175 {PB_7, UART_4, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF6_USART4)}, // ARDUINO D5 - Used also to drive LED4
AnnaBridge 165:e614a9f1c9e2 176 {PB_13, LPUART_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF4_LPUART1)}, // ARDUINO D13
AnnaBridge 165:e614a9f1c9e2 177 {NC, NC, 0}
AnnaBridge 165:e614a9f1c9e2 178 };
AnnaBridge 165:e614a9f1c9e2 179
AnnaBridge 165:e614a9f1c9e2 180 //*** SPI ***
AnnaBridge 165:e614a9f1c9e2 181
AnnaBridge 165:e614a9f1c9e2 182 const PinMap PinMap_SPI_MOSI[] = {
AnnaBridge 165:e614a9f1c9e2 183 {PA_7, SPI_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF0_SPI1)}, // Pin not available on any connector
AnnaBridge 165:e614a9f1c9e2 184 {PA_12, SPI_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF0_SPI1)}, // CN3.14
AnnaBridge 165:e614a9f1c9e2 185 {PB_5, SPI_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF0_SPI1)}, // ARDUINO D4 - Used also to drive LED1
AnnaBridge 165:e614a9f1c9e2 186 {PB_15, SPI_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF0_SPI2)}, // ARDUINO D11
AnnaBridge 165:e614a9f1c9e2 187 {NC, NC, 0}
AnnaBridge 165:e614a9f1c9e2 188 };
AnnaBridge 165:e614a9f1c9e2 189
AnnaBridge 165:e614a9f1c9e2 190 const PinMap PinMap_SPI_MISO[] = {
AnnaBridge 165:e614a9f1c9e2 191 {PA_6, SPI_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF0_SPI1)}, // Pin not available on any connector
AnnaBridge 165:e614a9f1c9e2 192 {PA_11, SPI_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF0_SPI1)}, // CN3.15
AnnaBridge 165:e614a9f1c9e2 193 {PB_4, SPI_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF0_SPI1)}, // Pin not available on any connector
AnnaBridge 165:e614a9f1c9e2 194 {PB_14, SPI_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF0_SPI2)}, // ARDUINO D12
AnnaBridge 165:e614a9f1c9e2 195 {PC_2, SPI_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_SPI2)}, // Pin not available on any connector
AnnaBridge 165:e614a9f1c9e2 196 {NC, NC, 0}
AnnaBridge 165:e614a9f1c9e2 197 };
AnnaBridge 165:e614a9f1c9e2 198
AnnaBridge 165:e614a9f1c9e2 199 const PinMap PinMap_SPI_SCLK[] = {
AnnaBridge 165:e614a9f1c9e2 200 {PA_5, SPI_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF0_SPI1)}, // CN3.7 - Used also to drive LED2
AnnaBridge 165:e614a9f1c9e2 201 {PB_3, SPI_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF0_SPI1)}, // Pin not available on any connector
AnnaBridge 165:e614a9f1c9e2 202 {PB_10, SPI_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI2)}, // Pin not available on any connector
AnnaBridge 165:e614a9f1c9e2 203 {PB_13, SPI_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF0_SPI2)}, // ARDUINO D13
AnnaBridge 165:e614a9f1c9e2 204 {NC, NC, 0}
AnnaBridge 165:e614a9f1c9e2 205 };
AnnaBridge 165:e614a9f1c9e2 206
AnnaBridge 165:e614a9f1c9e2 207 const PinMap PinMap_SPI_SSEL[] = {
AnnaBridge 165:e614a9f1c9e2 208 {PA_4, SPI_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF0_SPI1)}, // ARDUINO A2
AnnaBridge 165:e614a9f1c9e2 209 {PA_15, SPI_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF0_SPI1)}, // Pin not available on any connector
AnnaBridge 165:e614a9f1c9e2 210 {PB_9, SPI_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI2)}, // ARDUINO D14
AnnaBridge 165:e614a9f1c9e2 211 {PB_12, SPI_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF0_SPI2)}, // ARDUINO D9
AnnaBridge 165:e614a9f1c9e2 212 {NC, NC, 0}
AnnaBridge 165:e614a9f1c9e2 213 };