mbed official / mbed-dev

mbed library sources. Supersedes mbed-src.

Dependents:   Nucleo_Hello_Encoder BLE_iBeaconScan AM1805_DEMO DISCO-F429ZI_ExportTemplate1 ... more

targets/TARGET_STM/TARGET_STM32F4/TARGET_STM32F401xE/TARGET_NUCLEO_F401RE/PeripheralPins.c@181:57724642e740, 2018-02-16 (annotated)

Committer:
AnnaBridge
Date:
Fri Feb 16 16:09:33 2018 +0000
Revision:
181:57724642e740
Parent:
163:74e0ce7f98e8
Child:
186:707f6e361f3e
mbed-dev library. Release version 159.

Who changed what in which revision?

UserRevisionLine numberNew contents of line
<> 149:156823d33999 1 /* mbed Microcontroller Library
<> 149:156823d33999 2 *******************************************************************************
AnnaBridge 181:57724642e740 3 * Copyright (c) 2017, STMicroelectronics
<> 149:156823d33999 4 * All rights reserved.
<> 149:156823d33999 5 *
<> 149:156823d33999 6 * Redistribution and use in source and binary forms, with or without
<> 149:156823d33999 7 * modification, are permitted provided that the following conditions are met:
<> 149:156823d33999 8 *
<> 149:156823d33999 9 * 1. Redistributions of source code must retain the above copyright notice,
<> 149:156823d33999 10 * this list of conditions and the following disclaimer.
<> 149:156823d33999 11 * 2. Redistributions in binary form must reproduce the above copyright notice,
<> 149:156823d33999 12 * this list of conditions and the following disclaimer in the documentation
<> 149:156823d33999 13 * and/or other materials provided with the distribution.
<> 149:156823d33999 14 * 3. Neither the name of STMicroelectronics nor the names of its contributors
<> 149:156823d33999 15 * may be used to endorse or promote products derived from this software
<> 149:156823d33999 16 * without specific prior written permission.
<> 149:156823d33999 17 *
<> 149:156823d33999 18 * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
<> 149:156823d33999 19 * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
<> 149:156823d33999 20 * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
<> 149:156823d33999 21 * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
<> 149:156823d33999 22 * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
<> 149:156823d33999 23 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
<> 149:156823d33999 24 * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
<> 149:156823d33999 25 * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
<> 149:156823d33999 26 * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
<> 149:156823d33999 27 * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
<> 149:156823d33999 28 *******************************************************************************
<> 149:156823d33999 29 */
<> 149:156823d33999 30
<> 149:156823d33999 31 #include "PeripheralPins.h"
AnnaBridge 181:57724642e740 32 #include "mbed_toolchain.h"
<> 149:156823d33999 33
AnnaBridge 181:57724642e740 34 //==============================================================================
AnnaBridge 181:57724642e740 35 // Notes
AnnaBridge 181:57724642e740 36 //
AnnaBridge 181:57724642e740 37 // - The pins mentionned Px_y_ALTz are alternative possibilities which use other
AnnaBridge 181:57724642e740 38 // HW peripheral instances. You can use them the same way as any other "normal"
AnnaBridge 181:57724642e740 39 // pin (i.e. PwmOut pwm(PA_7_ALT0);). These pins are not displayed on the board
AnnaBridge 181:57724642e740 40 // pinout image on mbed.org.
AnnaBridge 181:57724642e740 41 //
AnnaBridge 181:57724642e740 42 // - The pins which are connected to other components present on the board have
AnnaBridge 181:57724642e740 43 // the comment "Connected to xxx". The pin function may not work properly in this
AnnaBridge 181:57724642e740 44 // case. These pins may not be displayed on the board pinout image on mbed.org.
AnnaBridge 181:57724642e740 45 // Please read the board reference manual and schematic for more information.
AnnaBridge 181:57724642e740 46 //
AnnaBridge 181:57724642e740 47 // - Warning: some pins are connected to the default STDIO_UART_TX and STDIO_UART_RX pins.
AnnaBridge 181:57724642e740 48 // See https://os.mbed.com/teams/ST/wiki/STDIO for more information.
AnnaBridge 181:57724642e740 49 //
AnnaBridge 181:57724642e740 50 //==============================================================================
<> 149:156823d33999 51
<> 149:156823d33999 52 //*** ADC ***
<> 149:156823d33999 53
AnnaBridge 181:57724642e740 54 MBED_WEAK const PinMap PinMap_ADC[] = {
<> 149:156823d33999 55 {PA_0, ADC_1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 0, 0)}, // ADC1_IN0
<> 149:156823d33999 56 {PA_1, ADC_1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 1, 0)}, // ADC1_IN1
AnnaBridge 181:57724642e740 57 #ifdef MBED_CONF_TARGET_STDIO_UART_TX
AnnaBridge 181:57724642e740 58 {PA_2, ADC_1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 2, 0)}, // ADC1_IN2
AnnaBridge 181:57724642e740 59 #endif
AnnaBridge 181:57724642e740 60 #ifdef MBED_CONF_TARGET_STDIO_UART_RX
AnnaBridge 181:57724642e740 61 {PA_3, ADC_1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 3, 0)}, // ADC1_IN3
AnnaBridge 181:57724642e740 62 #endif
<> 149:156823d33999 63 {PA_4, ADC_1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 4, 0)}, // ADC1_IN4
<> 149:156823d33999 64 {PA_5, ADC_1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 5, 0)}, // ADC1_IN5
<> 149:156823d33999 65 {PA_6, ADC_1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 6, 0)}, // ADC1_IN6
<> 149:156823d33999 66 {PA_7, ADC_1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 7, 0)}, // ADC1_IN7
<> 149:156823d33999 67 {PB_0, ADC_1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 8, 0)}, // ADC1_IN8
<> 149:156823d33999 68 {PB_1, ADC_1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 9, 0)}, // ADC1_IN9
<> 149:156823d33999 69 {PC_0, ADC_1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 10, 0)}, // ADC1_IN10
<> 149:156823d33999 70 {PC_1, ADC_1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 11, 0)}, // ADC1_IN11
<> 149:156823d33999 71 {PC_2, ADC_1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 12, 0)}, // ADC1_IN12
<> 149:156823d33999 72 {PC_3, ADC_1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 13, 0)}, // ADC1_IN13
<> 149:156823d33999 73 {PC_4, ADC_1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 14, 0)}, // ADC1_IN14
<> 149:156823d33999 74 {PC_5, ADC_1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 15, 0)}, // ADC1_IN15
Anna Bridge 163:74e0ce7f98e8 75 {NC, NC, 0}
Anna Bridge 163:74e0ce7f98e8 76 };
Anna Bridge 163:74e0ce7f98e8 77
AnnaBridge 181:57724642e740 78 MBED_WEAK const PinMap PinMap_ADC_Internal[] = {
<> 149:156823d33999 79 {ADC_TEMP, ADC_1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 16, 0)}, // See in analogin_api.c the correct ADC channel used
<> 149:156823d33999 80 {ADC_VREF, ADC_1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 17, 0)}, // See in analogin_api.c the correct ADC channel used
<> 149:156823d33999 81 {ADC_VBAT, ADC_1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 18, 0)}, // See in analogin_api.c the correct ADC channel used
<> 149:156823d33999 82 {NC, NC, 0}
<> 149:156823d33999 83 };
<> 149:156823d33999 84
<> 149:156823d33999 85 //*** I2C ***
<> 149:156823d33999 86
AnnaBridge 181:57724642e740 87 MBED_WEAK const PinMap PinMap_I2C_SDA[] = {
<> 149:156823d33999 88 {PB_3, I2C_2, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF9_I2C2)},
<> 149:156823d33999 89 {PB_4, I2C_3, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF9_I2C3)},
<> 149:156823d33999 90 {PB_7, I2C_1, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF4_I2C1)},
<> 149:156823d33999 91 {PB_9, I2C_1, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF4_I2C1)}, // ARDUINO
<> 149:156823d33999 92 {PC_9, I2C_3, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF4_I2C3)},
<> 149:156823d33999 93 {NC, NC, 0}
<> 149:156823d33999 94 };
<> 149:156823d33999 95
AnnaBridge 181:57724642e740 96 MBED_WEAK const PinMap PinMap_I2C_SCL[] = {
<> 149:156823d33999 97 {PA_8, I2C_3, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF4_I2C3)},
<> 149:156823d33999 98 {PB_6, I2C_1, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF4_I2C1)},
<> 149:156823d33999 99 {PB_8, I2C_1, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF4_I2C1)}, // ARDUINO
<> 149:156823d33999 100 {PB_10, I2C_2, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF4_I2C2)},
<> 149:156823d33999 101 {NC, NC, 0}
<> 149:156823d33999 102 };
<> 149:156823d33999 103
<> 149:156823d33999 104 //*** PWM ***
<> 149:156823d33999 105
AnnaBridge 181:57724642e740 106 MBED_WEAK const PinMap PinMap_PWM[] = {
<> 149:156823d33999 107 {PA_0, PWM_2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM2, 1, 0)}, // TIM2_CH1
AnnaBridge 181:57724642e740 108 // {PA_0, PWM_5, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM5, 1, 0)}, // TIM5_CH1 // TIM5 used by the us_ticker
<> 149:156823d33999 109 {PA_1, PWM_2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM2, 2, 0)}, // TIM2_CH2
AnnaBridge 181:57724642e740 110 // {PA_1, PWM_5, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM5, 2, 0)}, // TIM5_CH2 // TIM5 used by the us_ticker
AnnaBridge 181:57724642e740 111 #ifdef MBED_CONF_TARGET_STDIO_UART_TX
AnnaBridge 181:57724642e740 112 {PA_2_ALT0, PWM_2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM2, 3, 0)}, // TIM2_CH3
AnnaBridge 181:57724642e740 113 // {PA_2, PWM_5, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM5, 3, 0)}, // TIM5_CH3 // TIM5 used by the us_ticker
AnnaBridge 181:57724642e740 114 {PA_2, PWM_9, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF3_TIM9, 1, 0)}, // TIM9_CH1
AnnaBridge 181:57724642e740 115 #endif
AnnaBridge 181:57724642e740 116 #ifdef MBED_CONF_TARGET_STDIO_UART_RX
AnnaBridge 181:57724642e740 117 {PA_3_ALT0, PWM_2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM2, 4, 0)}, // TIM2_CH4
AnnaBridge 181:57724642e740 118 // {PA_3, PWM_5, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM5, 4, 0)}, // TIM5_CH4 // TIM5 used by the us_ticker
AnnaBridge 181:57724642e740 119 {PA_3, PWM_9, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF3_TIM9, 2, 0)}, // TIM9_CH2
AnnaBridge 181:57724642e740 120 #endif
<> 149:156823d33999 121 {PA_5, PWM_2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM2, 1, 0)}, // TIM2_CH1
<> 149:156823d33999 122 {PA_6, PWM_3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM3, 1, 0)}, // TIM3_CH1
<> 149:156823d33999 123 {PA_7, PWM_1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1, 1, 1)}, // TIM1_CH1N - ARDUINO
AnnaBridge 181:57724642e740 124 {PA_7_ALT0, PWM_3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM3, 2, 0)}, // TIM3_CH2 - ARDUINO
<> 149:156823d33999 125 {PA_8, PWM_1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1, 1, 0)}, // TIM1_CH1
<> 149:156823d33999 126 {PA_9, PWM_1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1, 2, 0)}, // TIM1_CH2
<> 149:156823d33999 127 {PA_10, PWM_1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1, 3, 0)}, // TIM1_CH3
<> 149:156823d33999 128 {PA_11, PWM_1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1, 4, 0)}, // TIM1_CH4
<> 149:156823d33999 129 {PA_15, PWM_2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM2, 1, 0)}, // TIM2_CH1
<> 149:156823d33999 130
<> 149:156823d33999 131 {PB_0, PWM_1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1, 2, 1)}, // TIM1_CH2N
AnnaBridge 181:57724642e740 132 {PB_0_ALT0, PWM_3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM3, 3, 0)}, // TIM3_CH3
<> 149:156823d33999 133 {PB_1, PWM_1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1, 3, 1)}, // TIM1_CH3N
AnnaBridge 181:57724642e740 134 {PB_1_ALT0, PWM_3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM3, 4, 0)}, // TIM3_CH4
<> 149:156823d33999 135 {PB_3, PWM_2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM2, 2, 0)}, // TIM2_CH2 - ARDUINO
<> 149:156823d33999 136 {PB_4, PWM_3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM3, 1, 0)}, // TIM3_CH1 - ARDUINO
<> 149:156823d33999 137 {PB_5, PWM_3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM3, 2, 0)}, // TIM3_CH2
<> 149:156823d33999 138 {PB_6, PWM_4, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM4, 1, 0)}, // TIM4_CH1 - ARDUINO
<> 149:156823d33999 139 {PB_7, PWM_4, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM4, 2, 0)}, // TIM4_CH2
<> 149:156823d33999 140 {PB_8, PWM_4, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM4, 3, 0)}, // TIM4_CH3
AnnaBridge 181:57724642e740 141 {PB_8_ALT0, PWM_10,STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF3_TIM10, 1, 0)}, // TIM10_CH1
<> 149:156823d33999 142 {PB_9, PWM_4, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM4, 4, 0)}, // TIM4_CH4
AnnaBridge 181:57724642e740 143 {PB_9_ALT0, PWM_11,STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF3_TIM11, 1, 0)}, // TIM11_CH1
<> 149:156823d33999 144 {PB_10, PWM_2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM2, 3, 0)}, // TIM2_CH3 - ARDUINO
<> 149:156823d33999 145 {PB_13, PWM_1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1, 1, 1)}, // TIM1_CH1N
<> 149:156823d33999 146 {PB_14, PWM_1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1, 2, 1)}, // TIM1_CH2N
<> 149:156823d33999 147 {PB_15, PWM_1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1, 3, 1)}, // TIM1_CH3N
<> 149:156823d33999 148
<> 149:156823d33999 149 {PC_6, PWM_3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM3, 1, 0)}, // TIM3_CH1
<> 149:156823d33999 150 {PC_7, PWM_3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM3, 2, 0)}, // TIM3_CH2 - ARDUINO
<> 149:156823d33999 151 {PC_8, PWM_3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM3, 3, 0)}, // TIM3_CH3
<> 149:156823d33999 152 {PC_9, PWM_3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM3, 4, 0)}, // TIM3_CH4
<> 149:156823d33999 153
<> 149:156823d33999 154 {NC, NC, 0}
<> 149:156823d33999 155 };
<> 149:156823d33999 156
<> 149:156823d33999 157 //*** SERIAL ***
<> 149:156823d33999 158
AnnaBridge 181:57724642e740 159 MBED_WEAK const PinMap PinMap_UART_TX[] = {
AnnaBridge 181:57724642e740 160 {PA_2, UART_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART2)}, // Connected to STDIO_UART_TX (default)
<> 149:156823d33999 161 {PA_9, UART_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART1)},
<> 149:156823d33999 162 {PA_11, UART_6, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF8_USART6)},
<> 149:156823d33999 163 {PB_6, UART_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART1)},
<> 149:156823d33999 164 {PC_6, UART_6, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF8_USART6)},
<> 149:156823d33999 165 {NC, NC, 0}
<> 149:156823d33999 166 };
<> 149:156823d33999 167
AnnaBridge 181:57724642e740 168 MBED_WEAK const PinMap PinMap_UART_RX[] = {
AnnaBridge 181:57724642e740 169 {PA_3, UART_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART2)}, // Connected to STDIO_UART_RX (default)
<> 149:156823d33999 170 {PA_10, UART_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART1)},
<> 149:156823d33999 171 {PA_12, UART_6, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF8_USART6)},
<> 149:156823d33999 172 {PB_7, UART_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART1)},
<> 149:156823d33999 173 {PC_7, UART_6, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF8_USART6)},
<> 149:156823d33999 174 {NC, NC, 0}
<> 149:156823d33999 175 };
<> 149:156823d33999 176
AnnaBridge 181:57724642e740 177 MBED_WEAK const PinMap PinMap_UART_RTS[] = {
<> 149:156823d33999 178 {PA_1, UART_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART2)},
<> 149:156823d33999 179 {PA_12, UART_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART1)},
<> 149:156823d33999 180 {NC, NC, 0}
<> 149:156823d33999 181 };
<> 149:156823d33999 182
AnnaBridge 181:57724642e740 183 MBED_WEAK const PinMap PinMap_UART_CTS[] = {
<> 149:156823d33999 184 {PA_0, UART_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART2)},
<> 149:156823d33999 185 {PA_11, UART_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART1)},
<> 149:156823d33999 186 {NC, NC, 0}
<> 149:156823d33999 187 };
<> 149:156823d33999 188
<> 149:156823d33999 189 //*** SPI ***
<> 149:156823d33999 190
AnnaBridge 181:57724642e740 191 MBED_WEAK const PinMap PinMap_SPI_MOSI[] = {
<> 149:156823d33999 192 {PA_7, SPI_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI1)}, // ARDUINO
<> 149:156823d33999 193 {PB_5, SPI_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI1)},
AnnaBridge 181:57724642e740 194 {PB_5_ALT0, SPI_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF6_SPI3)},
<> 149:156823d33999 195 {PB_15, SPI_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI2)},
<> 149:156823d33999 196 {PC_3, SPI_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI2)},
<> 149:156823d33999 197 {PC_12, SPI_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF6_SPI3)},
<> 149:156823d33999 198 {NC, NC, 0}
<> 149:156823d33999 199 };
<> 149:156823d33999 200
AnnaBridge 181:57724642e740 201 MBED_WEAK const PinMap PinMap_SPI_MISO[] = {
<> 149:156823d33999 202 {PA_6, SPI_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI1)}, // ARDUINO
<> 149:156823d33999 203 {PB_4, SPI_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI1)},
AnnaBridge 181:57724642e740 204 {PB_4_ALT0, SPI_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF6_SPI3)},
<> 149:156823d33999 205 {PB_14, SPI_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI2)},
<> 149:156823d33999 206 {PC_2, SPI_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI2)},
<> 149:156823d33999 207 {PC_11, SPI_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF6_SPI3)},
<> 149:156823d33999 208 {NC, NC, 0}
<> 149:156823d33999 209 };
<> 149:156823d33999 210
AnnaBridge 181:57724642e740 211 MBED_WEAK const PinMap PinMap_SPI_SCLK[] = {
<> 149:156823d33999 212 {PA_5, SPI_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI1)}, // ARDUINO
<> 149:156823d33999 213 {PB_3, SPI_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI1)},
AnnaBridge 181:57724642e740 214 {PB_3_ALT0, SPI_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF6_SPI3)},
<> 149:156823d33999 215 {PB_10, SPI_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI2)},
<> 149:156823d33999 216 {PB_13, SPI_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI2)},
<> 149:156823d33999 217 {PC_10, SPI_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF6_SPI3)},
<> 149:156823d33999 218 {NC, NC, 0}
<> 149:156823d33999 219 };
<> 149:156823d33999 220
AnnaBridge 181:57724642e740 221 MBED_WEAK const PinMap PinMap_SPI_SSEL[] = {
<> 149:156823d33999 222 {PA_4, SPI_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF5_SPI1)},
AnnaBridge 181:57724642e740 223 {PA_4_ALT0, SPI_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF6_SPI3)},
<> 149:156823d33999 224 {PA_15, SPI_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF5_SPI1)},
AnnaBridge 181:57724642e740 225 {PA_15_ALT0, SPI_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF6_SPI3)},
<> 149:156823d33999 226 {PB_9, SPI_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF5_SPI2)},
<> 149:156823d33999 227 {PB_12, SPI_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF5_SPI2)},
<> 149:156823d33999 228 {NC, NC, 0}
<> 149:156823d33999 229 };