Diff: cmsis/BUILD/mbed/hal/analogout_api.h

Revision:

189:f392fc9709a3

diff -r bcfe06ba3d64 -r f392fc9709a3 cmsis/BUILD/mbed/hal/analogout_api.h
--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/cmsis/BUILD/mbed/hal/analogout_api.h	Wed Feb 20 22:31:08 2019 +0000
@@ -0,0 +1,94 @@
+
+/** \addtogroup hal */
+/** @{*/
+/* mbed Microcontroller Library
+ * Copyright (c) 2006-2013 ARM Limited
+ * SPDX-License-Identifier: Apache-2.0
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *     http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+#ifndef MBED_ANALOGOUT_API_H
+#define MBED_ANALOGOUT_API_H
+
+#include "device.h"
+
+#if DEVICE_ANALOGOUT
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+/** Analogout hal structure. dac_s is declared in the target's hal
+ */
+typedef struct dac_s dac_t;
+
+/**
+ * \defgroup hal_analogout Analogout hal functions
+ * @{
+ */
+
+/** Initialize the analogout peripheral
+ *
+ * Configures the pin used by analogout.
+ * @param obj The analogout object to initialize
+ * @param pin The analogout pin name
+ */
+void analogout_init(dac_t *obj, PinName pin);
+
+/** Release the analogout object
+ *
+ * Note: This is not currently used in the mbed-drivers
+ * @param obj The analogout object
+ */
+void analogout_free(dac_t *obj);
+
+/** Set the output voltage, specified as a percentage (float)
+ *
+ * @param obj The analogin object
+ * @param value The floating-point output voltage to be set
+ */
+void analogout_write(dac_t *obj, float value);
+
+/** Set the output voltage, specified as unsigned 16-bit
+ *
+ * @param obj The analogin object
+ * @param value The unsigned 16-bit output voltage to be set
+ */
+void analogout_write_u16(dac_t *obj, uint16_t value);
+
+/** Read the current voltage value on the pin
+ *
+ * @param obj The analogin object
+ * @return A floating-point value representing the current voltage on the pin,
+ *     measured as a percentage
+ */
+float analogout_read(dac_t *obj);
+
+/** Read the current voltage value on the pin, as a normalized unsigned 16bit value
+ *
+ * @param obj The analogin object
+ * @return An unsigned 16-bit value representing the current voltage on the pin
+ */
+uint16_t analogout_read_u16(dac_t *obj);
+
+/**@}*/
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif
+
+#endif
+
+/** @}*/