mbed official
mbed library sources. Supersedes mbed-src.
Dependents: Nucleo_Hello_Encoder BLE_iBeaconScan AM1805_DEMO DISCO-F429ZI_ExportTemplate1 ... more
Diff: targets/hal/TARGET_NXP/TARGET_LPC11UXX/TARGET_LPC11U24_301/PinNames.h
- Revision:
- 144:ef7eb2e8f9f7
- Parent:
- 0:9b334a45a8ff
--- a/targets/hal/TARGET_NXP/TARGET_LPC11UXX/TARGET_LPC11U24_301/PinNames.h Tue Aug 02 14:07:36 2016 +0000
+++ b/targets/hal/TARGET_NXP/TARGET_LPC11UXX/TARGET_LPC11U24_301/PinNames.h Fri Sep 02 15:07:44 2016 +0100
@@ -1,166 +1,166 @@
-/* mbed Microcontroller Library
- * Copyright (c) 2006-2013 ARM Limited
- *
- * Licensed under the Apache License, Version 2.0 (the "License");
- * you may not use this file except in compliance with the License.
- * You may obtain a copy of the License at
- *
- * http://www.apache.org/licenses/LICENSE-2.0
- *
- * Unless required by applicable law or agreed to in writing, software
- * distributed under the License is distributed on an "AS IS" BASIS,
- * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
- * See the License for the specific language governing permissions and
- * limitations under the License.
- */
-#ifndef MBED_PINNAMES_H
-#define MBED_PINNAMES_H
-
-#include "cmsis.h"
-
-#ifdef __cplusplus
-extern "C" {
-#endif
-
-typedef enum {
- PIN_INPUT,
- PIN_OUTPUT
-} PinDirection;
-
-#define PORT_SHIFT 5
-
-typedef enum {
- // LPC11U Pin Names
- P0_0 = 0,
- P0_1 = 1,
- P0_2 = 2,
- P0_3 = 3,
- P0_4 = 4,
- P0_5 = 5,
- P0_6 = 6,
- P0_7 = 7,
- P0_8 = 8,
- P0_9 = 9,
- P0_10 = 10,
- P0_11 = 11,
- P0_12 = 12,
- P0_13 = 13,
- P0_14 = 14,
- P0_15 = 15,
- P0_16 = 16,
- P0_17 = 17,
- P0_18 = 18,
- P0_19 = 19,
- P0_20 = 20,
- P0_21 = 21,
- P0_22 = 22,
- P0_23 = 23,
- P0_24 = 24,
- P0_25 = 25,
- P0_26 = 26,
- P0_27 = 27,
-
- P1_0 = 32,
- P1_1 = 33,
- P1_2 = 34,
- P1_3 = 35,
- P1_4 = 36,
- P1_5 = 37,
- P1_6 = 38,
- P1_7 = 39,
- P1_8 = 40,
- P1_9 = 41,
- P1_10 = 42,
- P1_11 = 43,
- P1_12 = 44,
- P1_13 = 45,
- P1_14 = 46,
- P1_15 = 47,
- P1_16 = 48,
- P1_17 = 49,
- P1_18 = 50,
- P1_19 = 51,
- P1_20 = 52,
- P1_21 = 53,
- P1_22 = 54,
- P1_23 = 55,
- P1_24 = 56,
- P1_25 = 57,
- P1_26 = 58,
- P1_27 = 59,
- P1_28 = 60,
- P1_29 = 61,
-
- P1_31 = 63,
-
- // mbed DIP Pin Names
- p5 = P0_9,
- p6 = P0_8,
- p7 = P1_29,
- p8 = P0_2,
- p9 = P1_27,
- p10 = P1_26,
- p11 = P1_22,
- p12 = P1_21,
- p13 = P1_20,
- p14 = P1_23,
- p15 = P0_11,
- p16 = P0_12,
- p17 = P0_13,
- p18 = P0_14,
- p19 = P0_16,
- p20 = P0_22,
- p21 = P0_7,
- p22 = P0_17,
- p23 = P1_17,
- p24 = P1_18,
- p25 = P1_24,
- p26 = P1_25,
- p27 = P0_4,
- p28 = P0_5,
- p29 = P1_5,
- p30 = P1_2,
-
- p33 = P0_3,
- p34 = P1_15,
- p35 = P0_20,
- p36 = P0_21,
-
- // Other mbed Pin Names
- LED1 = P1_8,
- LED2 = P1_9,
- LED3 = P1_10,
- LED4 = P1_11,
-
- USBTX = P0_19,
- USBRX = P0_18,
-
- // Not connected
- NC = (int)0xFFFFFFFF,
-} PinName;
-
-typedef enum {
- CHANNEL0 = FLEX_INT0_IRQn,
- CHANNEL1 = FLEX_INT1_IRQn,
- CHANNEL2 = FLEX_INT2_IRQn,
- CHANNEL3 = FLEX_INT3_IRQn,
- CHANNEL4 = FLEX_INT4_IRQn,
- CHANNEL5 = FLEX_INT5_IRQn,
- CHANNEL6 = FLEX_INT6_IRQn,
- CHANNEL7 = FLEX_INT7_IRQn
-} Channel;
-
-typedef enum {
- PullUp = 2,
- PullDown = 1,
- PullNone = 0,
- Repeater = 3,
- OpenDrain = 4,
- PullDefault = PullDown
-} PinMode;
-
-#ifdef __cplusplus
-}
-#endif
-
-#endif
+/* mbed Microcontroller Library
+ * Copyright (c) 2006-2013 ARM Limited
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ * http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+#ifndef MBED_PINNAMES_H
+#define MBED_PINNAMES_H
+
+#include "cmsis.h"
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+typedef enum {
+ PIN_INPUT,
+ PIN_OUTPUT
+} PinDirection;
+
+#define PORT_SHIFT 5
+
+typedef enum {
+ // LPC11U Pin Names
+ P0_0 = 0,
+ P0_1 = 1,
+ P0_2 = 2,
+ P0_3 = 3,
+ P0_4 = 4,
+ P0_5 = 5,
+ P0_6 = 6,
+ P0_7 = 7,
+ P0_8 = 8,
+ P0_9 = 9,
+ P0_10 = 10,
+ P0_11 = 11,
+ P0_12 = 12,
+ P0_13 = 13,
+ P0_14 = 14,
+ P0_15 = 15,
+ P0_16 = 16,
+ P0_17 = 17,
+ P0_18 = 18,
+ P0_19 = 19,
+ P0_20 = 20,
+ P0_21 = 21,
+ P0_22 = 22,
+ P0_23 = 23,
+ P0_24 = 24,
+ P0_25 = 25,
+ P0_26 = 26,
+ P0_27 = 27,
+
+ P1_0 = 32,
+ P1_1 = 33,
+ P1_2 = 34,
+ P1_3 = 35,
+ P1_4 = 36,
+ P1_5 = 37,
+ P1_6 = 38,
+ P1_7 = 39,
+ P1_8 = 40,
+ P1_9 = 41,
+ P1_10 = 42,
+ P1_11 = 43,
+ P1_12 = 44,
+ P1_13 = 45,
+ P1_14 = 46,
+ P1_15 = 47,
+ P1_16 = 48,
+ P1_17 = 49,
+ P1_18 = 50,
+ P1_19 = 51,
+ P1_20 = 52,
+ P1_21 = 53,
+ P1_22 = 54,
+ P1_23 = 55,
+ P1_24 = 56,
+ P1_25 = 57,
+ P1_26 = 58,
+ P1_27 = 59,
+ P1_28 = 60,
+ P1_29 = 61,
+
+ P1_31 = 63,
+
+ // mbed DIP Pin Names
+ p5 = P0_9,
+ p6 = P0_8,
+ p7 = P1_29,
+ p8 = P0_2,
+ p9 = P1_27,
+ p10 = P1_26,
+ p11 = P1_22,
+ p12 = P1_21,
+ p13 = P1_20,
+ p14 = P1_23,
+ p15 = P0_11,
+ p16 = P0_12,
+ p17 = P0_13,
+ p18 = P0_14,
+ p19 = P0_16,
+ p20 = P0_22,
+ p21 = P0_7,
+ p22 = P0_17,
+ p23 = P1_17,
+ p24 = P1_18,
+ p25 = P1_24,
+ p26 = P1_25,
+ p27 = P0_4,
+ p28 = P0_5,
+ p29 = P1_5,
+ p30 = P1_2,
+
+ p33 = P0_3,
+ p34 = P1_15,
+ p35 = P0_20,
+ p36 = P0_21,
+
+ // Other mbed Pin Names
+ LED1 = P1_8,
+ LED2 = P1_9,
+ LED3 = P1_10,
+ LED4 = P1_11,
+
+ USBTX = P0_19,
+ USBRX = P0_18,
+
+ // Not connected
+ NC = (int)0xFFFFFFFF,
+} PinName;
+
+typedef enum {
+ CHANNEL0 = FLEX_INT0_IRQn,
+ CHANNEL1 = FLEX_INT1_IRQn,
+ CHANNEL2 = FLEX_INT2_IRQn,
+ CHANNEL3 = FLEX_INT3_IRQn,
+ CHANNEL4 = FLEX_INT4_IRQn,
+ CHANNEL5 = FLEX_INT5_IRQn,
+ CHANNEL6 = FLEX_INT6_IRQn,
+ CHANNEL7 = FLEX_INT7_IRQn
+} Channel;
+
+typedef enum {
+ PullUp = 2,
+ PullDown = 1,
+ PullNone = 0,
+ Repeater = 3,
+ OpenDrain = 4,
+ PullDefault = PullDown
+} PinMode;
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif
