Diff: targets/TARGET_NXP/TARGET_LPC11UXX/TARGET_MCU_LPC11U35_501/TARGET_LPC11U35_501/PinNames.h

Revision:

149:156823d33999

Parent:

144:ef7eb2e8f9f7

--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/targets/TARGET_NXP/TARGET_LPC11UXX/TARGET_MCU_LPC11U35_501/TARGET_LPC11U35_501/PinNames.h	Fri Oct 28 11:17:30 2016 +0100
@@ -0,0 +1,181 @@
+/* mbed Microcontroller Library
+ * Copyright (c) 2006-2014 ARM Limited
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *     http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+#ifndef MBED_PINNAMES_H
+#define MBED_PINNAMES_H
+
+#include "cmsis.h"
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+typedef enum {
+    PIN_INPUT,
+    PIN_OUTPUT
+} PinDirection;
+
+#define PORT_SHIFT  5
+
+typedef enum {
+    // LPC11U Pin Names
+    P0_0 = 0,
+    P0_1 = 1,
+    P0_2 = 2,
+    P0_3 = 3,
+    P0_4 = 4,
+    P0_5 = 5,
+    P0_6 = 6,
+    P0_7 = 7,
+    P0_8 = 8,
+    P0_9 = 9,
+    P0_10 = 10,
+    P0_11 = 11,
+    P0_12 = 12,
+    P0_13 = 13,
+    P0_14 = 14,
+    P0_15 = 15,
+    P0_16 = 16,
+    P0_17 = 17,
+    P0_18 = 18,
+    P0_19 = 19,
+    P0_20 = 20,
+    P0_21 = 21,
+    P0_22 = 22,
+    P0_23 = 23,
+    P0_24 = 24,
+    P0_25 = 25,
+    P0_26 = 26,
+    P0_27 = 27,
+
+    P1_0 = 32,
+    P1_1 = 33,
+    P1_2 = 34,
+    P1_3 = 35,
+    P1_4 = 36,
+    P1_5 = 37,
+    P1_6 = 38,
+    P1_7 = 39,
+    P1_8 = 40,
+    P1_9 = 41,
+    P1_10 = 42,
+    P1_11 = 43,
+    P1_12 = 44,
+    P1_13 = 45,
+    P1_14 = 46,
+    P1_15 = 47,
+    P1_16 = 48,
+    P1_17 = 49,
+    P1_18 = 50,
+    P1_19 = 51,
+    P1_20 = 52,
+    P1_21 = 53,
+    P1_22 = 54,
+    P1_23 = 55,
+    P1_24 = 56,
+    P1_25 = 57,
+    P1_26 = 58,
+    P1_27 = 59,
+    P1_28 = 60,
+    P1_29 = 61,
+
+    P1_31 = 63,
+
+    // mbed DIP Pin Names
+                    // CN1-1  (GND)
+                    // CN1-2  (EXTPOWER)
+                    // CN1-3  (NC)
+    p4 = P0_0,      // CN1-4
+    p5 = P0_9,      // CN1-5
+    p6 = P0_8,      // CN1-6
+    p7 = P0_10,     // CN1-7
+    p8 = P0_7,      // CN1-8
+    p9 = P0_19,     // CN1-9
+    p10 = P0_18,    // CN1-10
+    p11 = P0_21,    // CN1-11
+    p12 = P0_22,    // CN1-12
+    p13 = P1_15,    // CN1-13
+    p14 = P0_6,     // CN1-14
+    p15 = P0_11,    // CN1-15
+    p16 = P0_12,    // CN1-16
+    p17 = P0_13,    // CN1-17
+    p18 = P0_14,    // CN1-18
+    p19 = P0_15,    // CN1-19
+    p20 = P0_16,    // CN1-20
+
+    p21 = P0_14,    // CN2-20
+    p22 = P0_2,     // CN2-19
+    p23 = P0_23,    // CN2-18
+    p24 = P0_17,    // CN2-17
+    p25 = P0_20,    // CN2-16
+    p26 = P1_15,    // CN2-15
+    p27 = P0_4,     // CN2-14
+    p28 = P0_5,     // CN2-13
+    p29 = P1_19,    // CN2-12
+    p30 = P0_1,     // CN2-11
+                    // CN2-10 (D+USB)
+                    // CN2-9  (D-USB)
+    p33 = P0_3,     // CN2-8  (USB-VBUS)
+                    // CN2-7  (NC)
+                    // CN2-6  (NC)
+                    // CN2-5  (NC)
+                    // CN2-4  (NC)
+                    // CN2-3  (NC)
+                    // CN2-2  (VDD)
+                    // CN2-1  (VDD)
+
+    // Other mbed Pin Names
+    LED1 = P0_20,
+    LED2 = P0_21,
+    LED3 = P0_20,
+    LED4 = P0_21,
+
+    UART_TX = P0_19,
+    UART_RX = P0_18,
+
+    // Not connected
+    NC = (int)0xFFFFFFFF,
+
+    // Standard but not supported pins
+    USBTX = NC,
+    USBRX = NC,
+
+} PinName;
+
+typedef enum {
+    CHANNEL0 = FLEX_INT0_IRQn,
+    CHANNEL1 = FLEX_INT1_IRQn,
+    CHANNEL2 = FLEX_INT2_IRQn,
+    CHANNEL3 = FLEX_INT3_IRQn,
+    CHANNEL4 = FLEX_INT4_IRQn,
+    CHANNEL5 = FLEX_INT5_IRQn,
+    CHANNEL6 = FLEX_INT6_IRQn,
+    CHANNEL7 = FLEX_INT7_IRQn
+} Channel;
+
+typedef enum {
+    PullUp = 2,
+    PullDown = 1,
+    PullNone = 0,
+    Repeater = 3,
+    OpenDrain = 4,
+    PullDefault = PullDown
+} PinMode;
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif