mbed official / mbed-dev

mbed library sources. Supersedes mbed-src.

Dependents:   Nucleo_Hello_Encoder BLE_iBeaconScan AM1805_DEMO DISCO-F429ZI_ExportTemplate1 ... more

targets/TARGET_STM/TARGET_STM32F4/TARGET_STM32F401xE/TARGET_NUCLEO_F401RE/PeripheralPins.c@189:f392fc9709a3, 2019-02-20 (annotated)

Committer:
AnnaBridge
Date:
Wed Feb 20 22:31:08 2019 +0000
Revision:
189:f392fc9709a3
Parent:
186:707f6e361f3e 
mbed library release version 165

Who changed what in which revision?

UserRevisionLine numberNew contents of line
<> 149:156823d33999 1 /* mbed Microcontroller Library
<> 149:156823d33999 2 *******************************************************************************
Anna Bridge 186:707f6e361f3e 3 * Copyright (c) 2018, STMicroelectronics
<> 149:156823d33999 4 * All rights reserved.
<> 149:156823d33999 5 *
<> 149:156823d33999 6 * Redistribution and use in source and binary forms, with or without
<> 149:156823d33999 7 * modification, are permitted provided that the following conditions are met:
<> 149:156823d33999 8 *
<> 149:156823d33999 9 * 1. Redistributions of source code must retain the above copyright notice,
<> 149:156823d33999 10 * this list of conditions and the following disclaimer.
<> 149:156823d33999 11 * 2. Redistributions in binary form must reproduce the above copyright notice,
<> 149:156823d33999 12 * this list of conditions and the following disclaimer in the documentation
<> 149:156823d33999 13 * and/or other materials provided with the distribution.
<> 149:156823d33999 14 * 3. Neither the name of STMicroelectronics nor the names of its contributors
<> 149:156823d33999 15 * may be used to endorse or promote products derived from this software
<> 149:156823d33999 16 * without specific prior written permission.
<> 149:156823d33999 17 *
<> 149:156823d33999 18 * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
<> 149:156823d33999 19 * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
<> 149:156823d33999 20 * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
<> 149:156823d33999 21 * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
<> 149:156823d33999 22 * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
<> 149:156823d33999 23 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
<> 149:156823d33999 24 * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
<> 149:156823d33999 25 * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
<> 149:156823d33999 26 * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
<> 149:156823d33999 27 * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
<> 149:156823d33999 28 *******************************************************************************
<> 149:156823d33999 29 */
<> 149:156823d33999 30
<> 149:156823d33999 31 #include "PeripheralPins.h"
AnnaBridge 181:57724642e740 32 #include "mbed_toolchain.h"
<> 149:156823d33999 33
AnnaBridge 181:57724642e740 34 //==============================================================================
AnnaBridge 181:57724642e740 35 // Notes
AnnaBridge 181:57724642e740 36 //
Anna Bridge 186:707f6e361f3e 37 // - The pins mentioned Px_y_ALTz are alternative possibilities which use other
AnnaBridge 181:57724642e740 38 // HW peripheral instances. You can use them the same way as any other "normal"
AnnaBridge 181:57724642e740 39 // pin (i.e. PwmOut pwm(PA_7_ALT0);). These pins are not displayed on the board
AnnaBridge 181:57724642e740 40 // pinout image on mbed.org.
AnnaBridge 181:57724642e740 41 //
AnnaBridge 181:57724642e740 42 // - The pins which are connected to other components present on the board have
AnnaBridge 181:57724642e740 43 // the comment "Connected to xxx". The pin function may not work properly in this
AnnaBridge 181:57724642e740 44 // case. These pins may not be displayed on the board pinout image on mbed.org.
AnnaBridge 181:57724642e740 45 // Please read the board reference manual and schematic for more information.
AnnaBridge 181:57724642e740 46 //
AnnaBridge 181:57724642e740 47 // - Warning: some pins are connected to the default STDIO_UART_TX and STDIO_UART_RX pins.
AnnaBridge 181:57724642e740 48 // See https://os.mbed.com/teams/ST/wiki/STDIO for more information.
AnnaBridge 181:57724642e740 49 //
AnnaBridge 181:57724642e740 50 //==============================================================================
<> 149:156823d33999 51
Anna Bridge 186:707f6e361f3e 52
<> 149:156823d33999 53 //*** ADC ***
<> 149:156823d33999 54
AnnaBridge 181:57724642e740 55 MBED_WEAK const PinMap PinMap_ADC[] = {
Anna Bridge 186:707f6e361f3e 56 {PA_0, ADC_1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 0, 0)}, // ADC1_IN0
Anna Bridge 186:707f6e361f3e 57 {PA_1, ADC_1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 1, 0)}, // ADC1_IN1
AnnaBridge 181:57724642e740 58 #ifdef MBED_CONF_TARGET_STDIO_UART_TX
Anna Bridge 186:707f6e361f3e 59 {PA_2, ADC_1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 2, 0)}, // ADC1_IN2 // Connected to STDIO_UART_TX
AnnaBridge 181:57724642e740 60 #endif
AnnaBridge 181:57724642e740 61 #ifdef MBED_CONF_TARGET_STDIO_UART_RX
Anna Bridge 186:707f6e361f3e 62 {PA_3, ADC_1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 3, 0)}, // ADC1_IN3 // Connected to STDIO_UART_RX
AnnaBridge 181:57724642e740 63 #endif
Anna Bridge 186:707f6e361f3e 64 {PA_4, ADC_1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 4, 0)}, // ADC1_IN4
Anna Bridge 186:707f6e361f3e 65 {PA_5, ADC_1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 5, 0)}, // ADC1_IN5 // Connected to LD2 [Green Led]
Anna Bridge 186:707f6e361f3e 66 {PA_6, ADC_1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 6, 0)}, // ADC1_IN6
Anna Bridge 186:707f6e361f3e 67 {PA_7, ADC_1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 7, 0)}, // ADC1_IN7
Anna Bridge 186:707f6e361f3e 68 {PB_0, ADC_1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 8, 0)}, // ADC1_IN8
Anna Bridge 186:707f6e361f3e 69 {PB_1, ADC_1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 9, 0)}, // ADC1_IN9
Anna Bridge 186:707f6e361f3e 70 {PC_0, ADC_1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 10, 0)}, // ADC1_IN10
Anna Bridge 186:707f6e361f3e 71 {PC_1, ADC_1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 11, 0)}, // ADC1_IN11
Anna Bridge 186:707f6e361f3e 72 {PC_2, ADC_1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 12, 0)}, // ADC1_IN12
Anna Bridge 186:707f6e361f3e 73 {PC_3, ADC_1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 13, 0)}, // ADC1_IN13
Anna Bridge 186:707f6e361f3e 74 {PC_4, ADC_1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 14, 0)}, // ADC1_IN14
Anna Bridge 186:707f6e361f3e 75 {PC_5, ADC_1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 15, 0)}, // ADC1_IN15
Anna Bridge 186:707f6e361f3e 76 {NC, NC, 0}
Anna Bridge 163:74e0ce7f98e8 77 };
Anna Bridge 163:74e0ce7f98e8 78
AnnaBridge 181:57724642e740 79 MBED_WEAK const PinMap PinMap_ADC_Internal[] = {
Anna Bridge 186:707f6e361f3e 80 {ADC_TEMP, ADC_1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 16, 0)},
Anna Bridge 186:707f6e361f3e 81 {ADC_VREF, ADC_1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 17, 0)},
Anna Bridge 186:707f6e361f3e 82 {ADC_VBAT, ADC_1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 18, 0)},
Anna Bridge 186:707f6e361f3e 83 {NC, NC, 0}
<> 149:156823d33999 84 };
<> 149:156823d33999 85
<> 149:156823d33999 86 //*** I2C ***
<> 149:156823d33999 87
AnnaBridge 181:57724642e740 88 MBED_WEAK const PinMap PinMap_I2C_SDA[] = {
Anna Bridge 186:707f6e361f3e 89 {PB_3, I2C_2, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF9_I2C2)}, // Connected to SWO
Anna Bridge 186:707f6e361f3e 90 {PB_4, I2C_3, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF9_I2C3)},
Anna Bridge 186:707f6e361f3e 91 {PB_7, I2C_1, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF4_I2C1)},
Anna Bridge 186:707f6e361f3e 92 {PB_9, I2C_1, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF4_I2C1)},
Anna Bridge 186:707f6e361f3e 93 {PC_9, I2C_3, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF4_I2C3)},
Anna Bridge 186:707f6e361f3e 94 {NC, NC, 0}
<> 149:156823d33999 95 };
<> 149:156823d33999 96
AnnaBridge 181:57724642e740 97 MBED_WEAK const PinMap PinMap_I2C_SCL[] = {
Anna Bridge 186:707f6e361f3e 98 {PA_8, I2C_3, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF4_I2C3)},
Anna Bridge 186:707f6e361f3e 99 {PB_6, I2C_1, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF4_I2C1)},
Anna Bridge 186:707f6e361f3e 100 {PB_8, I2C_1, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF4_I2C1)},
Anna Bridge 186:707f6e361f3e 101 {PB_10, I2C_2, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF4_I2C2)},
Anna Bridge 186:707f6e361f3e 102 {NC, NC, 0}
<> 149:156823d33999 103 };
<> 149:156823d33999 104
<> 149:156823d33999 105 //*** PWM ***
<> 149:156823d33999 106
Anna Bridge 186:707f6e361f3e 107 // TIM5 cannot be used because already used by the us_ticker
AnnaBridge 181:57724642e740 108 MBED_WEAK const PinMap PinMap_PWM[] = {
Anna Bridge 186:707f6e361f3e 109 {PA_0, PWM_2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM2, 1, 0)}, // TIM2_CH1
Anna Bridge 186:707f6e361f3e 110 // {PA_0, PWM_5, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM5, 1, 0)}, // TIM5_CH1
Anna Bridge 186:707f6e361f3e 111 {PA_1, PWM_2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM2, 2, 0)}, // TIM2_CH2
Anna Bridge 186:707f6e361f3e 112 // {PA_1, PWM_5, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM5, 2, 0)}, // TIM5_CH2
AnnaBridge 181:57724642e740 113 #ifdef MBED_CONF_TARGET_STDIO_UART_TX
Anna Bridge 186:707f6e361f3e 114 {PA_2, PWM_2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM2, 3, 0)}, // TIM2_CH3 // Connected to STDIO_UART_TX
Anna Bridge 186:707f6e361f3e 115 // {PA_2, PWM_5, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM5, 3, 0)}, // TIM5_CH3 // Connected to STDIO_UART_TX
Anna Bridge 186:707f6e361f3e 116 {PA_2_ALT0, PWM_9, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF3_TIM9, 1, 0)}, // TIM9_CH1 // Connected to STDIO_UART_TX
AnnaBridge 181:57724642e740 117 #endif
AnnaBridge 181:57724642e740 118 #ifdef MBED_CONF_TARGET_STDIO_UART_RX
Anna Bridge 186:707f6e361f3e 119 {PA_3, PWM_2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM2, 4, 0)}, // TIM2_CH4 // Connected to STDIO_UART_RX
Anna Bridge 186:707f6e361f3e 120 // {PA_3, PWM_5, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM5, 4, 0)}, // TIM5_CH4 // Connected to STDIO_UART_RX
Anna Bridge 186:707f6e361f3e 121 {PA_3_ALT0, PWM_9, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF3_TIM9, 2, 0)}, // TIM9_CH2 // Connected to STDIO_UART_RX
AnnaBridge 181:57724642e740 122 #endif
Anna Bridge 186:707f6e361f3e 123 {PA_5, PWM_2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM2, 1, 0)}, // TIM2_CH1 // Connected to LD2 [Green Led]
Anna Bridge 186:707f6e361f3e 124 {PA_6, PWM_3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM3, 1, 0)}, // TIM3_CH1
Anna Bridge 186:707f6e361f3e 125 {PA_7, PWM_1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1, 1, 1)}, // TIM1_CH1N
Anna Bridge 186:707f6e361f3e 126 {PA_7_ALT0, PWM_3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM3, 2, 0)}, // TIM3_CH2
Anna Bridge 186:707f6e361f3e 127 {PA_8, PWM_1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1, 1, 0)}, // TIM1_CH1
Anna Bridge 186:707f6e361f3e 128 {PA_9, PWM_1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1, 2, 0)}, // TIM1_CH2
Anna Bridge 186:707f6e361f3e 129 {PA_10, PWM_1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1, 3, 0)}, // TIM1_CH3
Anna Bridge 186:707f6e361f3e 130 {PA_11, PWM_1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1, 4, 0)}, // TIM1_CH4
Anna Bridge 186:707f6e361f3e 131 {PA_15, PWM_2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM2, 1, 0)}, // TIM2_CH1
Anna Bridge 186:707f6e361f3e 132 {PB_0, PWM_1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1, 2, 1)}, // TIM1_CH2N
Anna Bridge 186:707f6e361f3e 133 {PB_0_ALT0, PWM_3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM3, 3, 0)}, // TIM3_CH3
Anna Bridge 186:707f6e361f3e 134 {PB_1, PWM_1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1, 3, 1)}, // TIM1_CH3N
Anna Bridge 186:707f6e361f3e 135 {PB_1_ALT0, PWM_3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM3, 4, 0)}, // TIM3_CH4
Anna Bridge 186:707f6e361f3e 136 {PB_3, PWM_2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM2, 2, 0)}, // TIM2_CH2 // Connected to SWO
Anna Bridge 186:707f6e361f3e 137 {PB_4, PWM_3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM3, 1, 0)}, // TIM3_CH1
Anna Bridge 186:707f6e361f3e 138 {PB_5, PWM_3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM3, 2, 0)}, // TIM3_CH2
Anna Bridge 186:707f6e361f3e 139 {PB_6, PWM_4, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM4, 1, 0)}, // TIM4_CH1
Anna Bridge 186:707f6e361f3e 140 {PB_7, PWM_4, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM4, 2, 0)}, // TIM4_CH2
Anna Bridge 186:707f6e361f3e 141 {PB_8, PWM_4, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM4, 3, 0)}, // TIM4_CH3
Anna Bridge 186:707f6e361f3e 142 {PB_8_ALT0, PWM_10, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF3_TIM10, 1, 0)}, // TIM10_CH1
Anna Bridge 186:707f6e361f3e 143 {PB_9, PWM_4, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM4, 4, 0)}, // TIM4_CH4
Anna Bridge 186:707f6e361f3e 144 {PB_9_ALT0, PWM_11, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF3_TIM11, 1, 0)}, // TIM11_CH1
Anna Bridge 186:707f6e361f3e 145 {PB_10, PWM_2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM2, 3, 0)}, // TIM2_CH3
Anna Bridge 186:707f6e361f3e 146 {PB_13, PWM_1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1, 1, 1)}, // TIM1_CH1N
Anna Bridge 186:707f6e361f3e 147 {PB_14, PWM_1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1, 2, 1)}, // TIM1_CH2N
Anna Bridge 186:707f6e361f3e 148 {PB_15, PWM_1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1, 3, 1)}, // TIM1_CH3N
Anna Bridge 186:707f6e361f3e 149 {PC_6, PWM_3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM3, 1, 0)}, // TIM3_CH1
Anna Bridge 186:707f6e361f3e 150 {PC_7, PWM_3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM3, 2, 0)}, // TIM3_CH2
Anna Bridge 186:707f6e361f3e 151 {PC_8, PWM_3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM3, 3, 0)}, // TIM3_CH3
Anna Bridge 186:707f6e361f3e 152 {PC_9, PWM_3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM3, 4, 0)}, // TIM3_CH4
Anna Bridge 186:707f6e361f3e 153 {NC, NC, 0}
<> 149:156823d33999 154 };
<> 149:156823d33999 155
<> 149:156823d33999 156 //*** SERIAL ***
<> 149:156823d33999 157
AnnaBridge 181:57724642e740 158 MBED_WEAK const PinMap PinMap_UART_TX[] = {
Anna Bridge 186:707f6e361f3e 159 {PA_2, UART_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART2)}, // Connected to STDIO_UART_TX
Anna Bridge 186:707f6e361f3e 160 {PA_9, UART_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART1)},
Anna Bridge 186:707f6e361f3e 161 {PA_11, UART_6, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF8_USART6)},
Anna Bridge 186:707f6e361f3e 162 {PB_6, UART_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART1)},
Anna Bridge 186:707f6e361f3e 163 {PC_6, UART_6, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF8_USART6)},
Anna Bridge 186:707f6e361f3e 164 {NC, NC, 0}
<> 149:156823d33999 165 };
<> 149:156823d33999 166
AnnaBridge 181:57724642e740 167 MBED_WEAK const PinMap PinMap_UART_RX[] = {
Anna Bridge 186:707f6e361f3e 168 {PA_3, UART_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART2)}, // Connected to STDIO_UART_RX
Anna Bridge 186:707f6e361f3e 169 {PA_10, UART_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART1)},
Anna Bridge 186:707f6e361f3e 170 {PA_12, UART_6, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF8_USART6)},
Anna Bridge 186:707f6e361f3e 171 {PB_7, UART_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART1)},
Anna Bridge 186:707f6e361f3e 172 {PC_7, UART_6, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF8_USART6)},
Anna Bridge 186:707f6e361f3e 173 {NC, NC, 0}
<> 149:156823d33999 174 };
<> 149:156823d33999 175
AnnaBridge 181:57724642e740 176 MBED_WEAK const PinMap PinMap_UART_RTS[] = {
Anna Bridge 186:707f6e361f3e 177 {PA_1, UART_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART2)},
Anna Bridge 186:707f6e361f3e 178 {PA_12, UART_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART1)},
Anna Bridge 186:707f6e361f3e 179 {NC, NC, 0}
<> 149:156823d33999 180 };
Anna Bridge 186:707f6e361f3e 181
AnnaBridge 181:57724642e740 182 MBED_WEAK const PinMap PinMap_UART_CTS[] = {
Anna Bridge 186:707f6e361f3e 183 {PA_0, UART_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART2)},
Anna Bridge 186:707f6e361f3e 184 {PA_11, UART_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART1)},
Anna Bridge 186:707f6e361f3e 185 {NC, NC, 0}
<> 149:156823d33999 186 };
<> 149:156823d33999 187
<> 149:156823d33999 188 //*** SPI ***
<> 149:156823d33999 189
AnnaBridge 181:57724642e740 190 MBED_WEAK const PinMap PinMap_SPI_MOSI[] = {
Anna Bridge 186:707f6e361f3e 191 {PA_7, SPI_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF5_SPI1)},
Anna Bridge 186:707f6e361f3e 192 {PB_5, SPI_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF5_SPI1)},
Anna Bridge 186:707f6e361f3e 193 {PB_5_ALT0, SPI_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF6_SPI3)},
Anna Bridge 186:707f6e361f3e 194 {PB_15, SPI_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF5_SPI2)},
Anna Bridge 186:707f6e361f3e 195 {PC_3, SPI_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF5_SPI2)},
Anna Bridge 186:707f6e361f3e 196 {PC_12, SPI_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF6_SPI3)},
Anna Bridge 186:707f6e361f3e 197 {NC, NC, 0}
<> 149:156823d33999 198 };
<> 149:156823d33999 199
AnnaBridge 181:57724642e740 200 MBED_WEAK const PinMap PinMap_SPI_MISO[] = {
Anna Bridge 186:707f6e361f3e 201 {PA_6, SPI_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF5_SPI1)},
Anna Bridge 186:707f6e361f3e 202 {PB_4, SPI_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF5_SPI1)},
Anna Bridge 186:707f6e361f3e 203 {PB_4_ALT0, SPI_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF6_SPI3)},
Anna Bridge 186:707f6e361f3e 204 {PB_14, SPI_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF5_SPI2)},
Anna Bridge 186:707f6e361f3e 205 {PC_2, SPI_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF5_SPI2)},
Anna Bridge 186:707f6e361f3e 206 {PC_11, SPI_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF6_SPI3)},
Anna Bridge 186:707f6e361f3e 207 {NC, NC, 0}
<> 149:156823d33999 208 };
<> 149:156823d33999 209
AnnaBridge 181:57724642e740 210 MBED_WEAK const PinMap PinMap_SPI_SCLK[] = {
Anna Bridge 186:707f6e361f3e 211 {PA_5, SPI_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF5_SPI1)}, // Connected to LD2 [Green Led]
Anna Bridge 186:707f6e361f3e 212 {PB_3, SPI_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF5_SPI1)}, // Connected to SWO
Anna Bridge 186:707f6e361f3e 213 {PB_3_ALT0, SPI_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF6_SPI3)}, // Connected to SWO
Anna Bridge 186:707f6e361f3e 214 {PB_10, SPI_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF5_SPI2)},
Anna Bridge 186:707f6e361f3e 215 {PB_13, SPI_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF5_SPI2)},
Anna Bridge 186:707f6e361f3e 216 {PC_10, SPI_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF6_SPI3)},
Anna Bridge 186:707f6e361f3e 217 {NC, NC, 0}
<> 149:156823d33999 218 };
<> 149:156823d33999 219
AnnaBridge 181:57724642e740 220 MBED_WEAK const PinMap PinMap_SPI_SSEL[] = {
Anna Bridge 186:707f6e361f3e 221 {PA_4, SPI_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF5_SPI1)},
AnnaBridge 181:57724642e740 222 {PA_4_ALT0, SPI_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF6_SPI3)},
Anna Bridge 186:707f6e361f3e 223 {PA_15, SPI_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF5_SPI1)},
AnnaBridge 181:57724642e740 224 {PA_15_ALT0, SPI_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF6_SPI3)},
Anna Bridge 186:707f6e361f3e 225 {PB_9, SPI_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF5_SPI2)},
Anna Bridge 186:707f6e361f3e 226 {PB_12, SPI_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF5_SPI2)},
Anna Bridge 186:707f6e361f3e 227 {NC, NC, 0}
<> 149:156823d33999 228 };