mbed official / mbed-dev

mbed library sources. Supersedes mbed-src.

Dependents:   Nucleo_Hello_Encoder BLE_iBeaconScan AM1805_DEMO DISCO-F429ZI_ExportTemplate1 ... more

targets/TARGET_STM/TARGET_STM32F1/TARGET_NUCLEO_F103RB/PeripheralPins.c@189:f392fc9709a3, 2019-02-20 (annotated)

Committer:
AnnaBridge
Date:
Wed Feb 20 22:31:08 2019 +0000
Revision:
189:f392fc9709a3
Parent:
187:0387e8f68319 
mbed library release version 165

Who changed what in which revision?

UserRevisionLine numberNew contents of line
<> 149:156823d33999 1 /* mbed Microcontroller Library
<> 149:156823d33999 2 *******************************************************************************
Anna Bridge 186:707f6e361f3e 3 * Copyright (c) 2018, STMicroelectronics
<> 149:156823d33999 4 * All rights reserved.
<> 149:156823d33999 5 *
<> 149:156823d33999 6 * Redistribution and use in source and binary forms, with or without
<> 149:156823d33999 7 * modification, are permitted provided that the following conditions are met:
<> 149:156823d33999 8 *
<> 149:156823d33999 9 * 1. Redistributions of source code must retain the above copyright notice,
<> 149:156823d33999 10 * this list of conditions and the following disclaimer.
<> 149:156823d33999 11 * 2. Redistributions in binary form must reproduce the above copyright notice,
<> 149:156823d33999 12 * this list of conditions and the following disclaimer in the documentation
<> 149:156823d33999 13 * and/or other materials provided with the distribution.
<> 149:156823d33999 14 * 3. Neither the name of STMicroelectronics nor the names of its contributors
<> 149:156823d33999 15 * may be used to endorse or promote products derived from this software
<> 149:156823d33999 16 * without specific prior written permission.
<> 149:156823d33999 17 *
<> 149:156823d33999 18 * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
<> 149:156823d33999 19 * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
<> 149:156823d33999 20 * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
<> 149:156823d33999 21 * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
<> 149:156823d33999 22 * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
<> 149:156823d33999 23 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
<> 149:156823d33999 24 * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
<> 149:156823d33999 25 * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
<> 149:156823d33999 26 * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
<> 149:156823d33999 27 * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
<> 149:156823d33999 28 *******************************************************************************
<> 149:156823d33999 29 */
<> 149:156823d33999 30
<> 149:156823d33999 31 #include "PeripheralPins.h"
AnnaBridge 181:57724642e740 32 #include "mbed_toolchain.h"
<> 149:156823d33999 33
Anna Bridge 186:707f6e361f3e 34 //==============================================================================
Anna Bridge 186:707f6e361f3e 35 // Notes
Anna Bridge 186:707f6e361f3e 36 //
Anna Bridge 186:707f6e361f3e 37 // - The pins mentioned Px_y_ALTz are alternative possibilities which use other
Anna Bridge 186:707f6e361f3e 38 // HW peripheral instances. You can use them the same way as any other "normal"
Anna Bridge 186:707f6e361f3e 39 // pin (i.e. PwmOut pwm(PA_7_ALT0);). These pins are not displayed on the board
Anna Bridge 186:707f6e361f3e 40 // pinout image on mbed.org.
Anna Bridge 186:707f6e361f3e 41 //
Anna Bridge 186:707f6e361f3e 42 // - The pins which are connected to other components present on the board have
Anna Bridge 186:707f6e361f3e 43 // the comment "Connected to xxx". The pin function may not work properly in this
Anna Bridge 186:707f6e361f3e 44 // case. These pins may not be displayed on the board pinout image on mbed.org.
Anna Bridge 186:707f6e361f3e 45 // Please read the board reference manual and schematic for more information.
Anna Bridge 186:707f6e361f3e 46 //
Anna Bridge 186:707f6e361f3e 47 // - Warning: pins connected to the default STDIO_UART_TX and STDIO_UART_RX pins are commented
Anna Bridge 186:707f6e361f3e 48 // See https://os.mbed.com/teams/ST/wiki/STDIO for more information.
Anna Bridge 186:707f6e361f3e 49 //
Anna Bridge 186:707f6e361f3e 50 //==============================================================================
Anna Bridge 186:707f6e361f3e 51
<> 149:156823d33999 52
<> 149:156823d33999 53 //*** ADC ***
<> 149:156823d33999 54
AnnaBridge 181:57724642e740 55 MBED_WEAK const PinMap PinMap_ADC[] = {
Anna Bridge 186:707f6e361f3e 56 {PA_0, ADC_1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 0, 0)}, // ADC1_IN0
Anna Bridge 186:707f6e361f3e 57 {PA_1, ADC_1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 1, 0)}, // ADC1_IN1
Anna Bridge 186:707f6e361f3e 58 // {PA_2, ADC_1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 2, 0)}, // ADC1_IN2 // Connected to STDIO_UART_TX
Anna Bridge 186:707f6e361f3e 59 // {PA_3, ADC_1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 3, 0)}, // ADC1_IN3 // Connected to STDIO_UART_RX
Anna Bridge 186:707f6e361f3e 60 {PA_4, ADC_1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 4, 0)}, // ADC1_IN4
Anna Bridge 186:707f6e361f3e 61 {PA_5, ADC_1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 5, 0)}, // ADC1_IN5 // Connected to LD2 [Green Led]
Anna Bridge 186:707f6e361f3e 62 {PA_6, ADC_1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 6, 0)}, // ADC1_IN6
Anna Bridge 186:707f6e361f3e 63 {PA_7, ADC_1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 7, 0)}, // ADC1_IN7
Anna Bridge 186:707f6e361f3e 64 {PB_0, ADC_1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 8, 0)}, // ADC1_IN8
Anna Bridge 186:707f6e361f3e 65 {PB_1, ADC_1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 9, 0)}, // ADC1_IN9
Anna Bridge 186:707f6e361f3e 66 {PC_0, ADC_1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 10, 0)}, // ADC1_IN10
Anna Bridge 186:707f6e361f3e 67 {PC_1, ADC_1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 11, 0)}, // ADC1_IN11
Anna Bridge 186:707f6e361f3e 68 {PC_2, ADC_1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 12, 0)}, // ADC1_IN12
Anna Bridge 186:707f6e361f3e 69 {PC_3, ADC_1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 13, 0)}, // ADC1_IN13
Anna Bridge 186:707f6e361f3e 70 {PC_4, ADC_1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 14, 0)}, // ADC1_IN14
Anna Bridge 186:707f6e361f3e 71 {PC_5, ADC_1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 15, 0)}, // ADC1_IN15
Anna Bridge 186:707f6e361f3e 72 {NC, NC, 0}
AnnaBridge 172:7d866c31b3c5 73 };
AnnaBridge 172:7d866c31b3c5 74
AnnaBridge 181:57724642e740 75 MBED_WEAK const PinMap PinMap_ADC_Internal[] = {
Anna Bridge 186:707f6e361f3e 76 {ADC_TEMP, ADC_1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 16, 0)},
Anna Bridge 186:707f6e361f3e 77 {ADC_VREF, ADC_1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 17, 0)},
Anna Bridge 186:707f6e361f3e 78 {NC, NC, 0}
<> 149:156823d33999 79 };
<> 149:156823d33999 80
<> 149:156823d33999 81 //*** I2C ***
<> 149:156823d33999 82
AnnaBridge 181:57724642e740 83 MBED_WEAK const PinMap PinMap_I2C_SDA[] = {
Anna Bridge 186:707f6e361f3e 84 {PB_7, I2C_1, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, 0)},
Anna Bridge 186:707f6e361f3e 85 {PB_9, I2C_1, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, 2)}, // GPIO_Remap_I2C1
Anna Bridge 186:707f6e361f3e 86 {PB_11, I2C_2, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, 0)},
Anna Bridge 186:707f6e361f3e 87 {NC, NC, 0}
<> 149:156823d33999 88 };
<> 149:156823d33999 89
AnnaBridge 181:57724642e740 90 MBED_WEAK const PinMap PinMap_I2C_SCL[] = {
Anna Bridge 186:707f6e361f3e 91 {PB_6, I2C_1, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, 0)},
Anna Bridge 186:707f6e361f3e 92 {PB_8, I2C_1, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, 2)}, // GPIO_Remap_I2C1
Anna Bridge 186:707f6e361f3e 93 {PB_10, I2C_2, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, 0)},
Anna Bridge 186:707f6e361f3e 94 {NC, NC, 0}
<> 149:156823d33999 95 };
<> 149:156823d33999 96
<> 149:156823d33999 97 //*** PWM ***
<> 149:156823d33999 98
<> 149:156823d33999 99 // TIM4 cannot be used because already used by the us_ticker
AnnaBridge 181:57724642e740 100 MBED_WEAK const PinMap PinMap_PWM[] = {
Anna Bridge 186:707f6e361f3e 101 {PA_0, PWM_2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, 0, 1, 0)}, // TIM2_CH1
Anna Bridge 186:707f6e361f3e 102 {PA_1, PWM_2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, 0, 2, 0)}, // TIM2_CH2
Anna Bridge 186:707f6e361f3e 103 // {PA_2, PWM_2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, 0, 3, 0)}, // TIM2_CH3 // Connected to STDIO_UART_TX
Anna Bridge 186:707f6e361f3e 104 // {PA_3, PWM_2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, 0, 4, 0)}, // TIM2_CH4 // Connected to STDIO_UART_RX
Anna Bridge 186:707f6e361f3e 105 {PA_6, PWM_3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, 0, 1, 0)}, // TIM3_CH1
Anna Bridge 186:707f6e361f3e 106 {PA_7, PWM_3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, 0, 2, 0)}, // TIM3_CH2
Anna Bridge 186:707f6e361f3e 107 {PA_8, PWM_1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, 0, 1, 0)}, // TIM1_CH1
Anna Bridge 186:707f6e361f3e 108 {PA_9, PWM_1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, 0, 2, 0)}, // TIM1_CH2
Anna Bridge 186:707f6e361f3e 109 {PA_10, PWM_1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, 0, 3, 0)}, // TIM1_CH3
Anna Bridge 186:707f6e361f3e 110 {PA_11, PWM_1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, 0, 4, 0)}, // TIM1_CH4
Anna Bridge 186:707f6e361f3e 111 {PA_15, PWM_2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, 8, 1, 0)}, // TIM2_CH1
AnnaBridge 187:0387e8f68319 112 {PB_0, PWM_3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, 0, 3, 0)}, // TIM3_CH3
AnnaBridge 187:0387e8f68319 113 {PB_1, PWM_3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, 0, 4, 0)}, // TIM3_CH4
Anna Bridge 186:707f6e361f3e 114 {PB_3, PWM_2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, 8, 2, 0)}, // TIM2_CH2 // Connected to SWO
Anna Bridge 186:707f6e361f3e 115 {PB_4, PWM_3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, 7, 1, 0)}, // TIM3_CH1
Anna Bridge 186:707f6e361f3e 116 {PB_5, PWM_3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, 7, 2, 0)}, // TIM3_CH2
Anna Bridge 186:707f6e361f3e 117 // {PB_6, PWM_4, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, 0, 1, 0)}, // TIM4_CH1
Anna Bridge 186:707f6e361f3e 118 // {PB_7, PWM_4, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, 0, 2, 0)}, // TIM4_CH2
Anna Bridge 186:707f6e361f3e 119 // {PB_8, PWM_4, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, 0, 3, 0)}, // TIM4_CH3
Anna Bridge 186:707f6e361f3e 120 // {PB_9, PWM_4, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, 0, 4, 0)}, // TIM4_CH4
Anna Bridge 186:707f6e361f3e 121 {PB_10, PWM_2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, 8, 3, 0)}, // TIM2_CH3
Anna Bridge 186:707f6e361f3e 122 {PB_11, PWM_2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, 8, 4, 0)}, // TIM2_CH4
Anna Bridge 186:707f6e361f3e 123 {PB_13, PWM_1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, 0, 1, 1)}, // TIM1_CH1N
Anna Bridge 186:707f6e361f3e 124 {PB_14, PWM_1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, 0, 2, 1)}, // TIM1_CH2N
Anna Bridge 186:707f6e361f3e 125 {PB_15, PWM_1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, 0, 3, 1)}, // TIM1_CH3N
Anna Bridge 186:707f6e361f3e 126 {PC_6, PWM_3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, 9, 1, 0)}, // TIM3_CH1
Anna Bridge 186:707f6e361f3e 127 {PC_7, PWM_3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, 9, 2, 0)}, // TIM3_CH2
Anna Bridge 186:707f6e361f3e 128 {PC_8, PWM_3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, 9, 3, 0)}, // TIM3_CH3
Anna Bridge 186:707f6e361f3e 129 {PC_9, PWM_3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, 9, 4, 0)}, // TIM3_CH4
Anna Bridge 186:707f6e361f3e 130 {NC, NC, 0}
<> 149:156823d33999 131 };
<> 149:156823d33999 132
<> 149:156823d33999 133 //*** SERIAL ***
<> 149:156823d33999 134
AnnaBridge 181:57724642e740 135 MBED_WEAK const PinMap PinMap_UART_TX[] = {
Anna Bridge 186:707f6e361f3e 136 {PA_2, UART_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, 0)}, // Connected to STDIO_UART_TX
Anna Bridge 186:707f6e361f3e 137 {PA_9, UART_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, 0)},
Anna Bridge 186:707f6e361f3e 138 {PB_6, UART_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, 3)}, // GPIO_Remap_USART1
Anna Bridge 186:707f6e361f3e 139 {PB_10, UART_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, 0)},
Anna Bridge 186:707f6e361f3e 140 {PC_10, UART_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, 5)}, // GPIO_PartialRemap_USART3
Anna Bridge 186:707f6e361f3e 141 {NC, NC, 0}
<> 149:156823d33999 142 };
<> 149:156823d33999 143
AnnaBridge 181:57724642e740 144 MBED_WEAK const PinMap PinMap_UART_RX[] = {
Anna Bridge 186:707f6e361f3e 145 {PA_3, UART_2, STM_PIN_DATA(STM_MODE_INPUT, GPIO_PULLUP, 0)}, // Connected to STDIO_UART_RX
Anna Bridge 186:707f6e361f3e 146 {PA_10, UART_1, STM_PIN_DATA(STM_MODE_INPUT, GPIO_PULLUP, 0)},
Anna Bridge 186:707f6e361f3e 147 {PB_7, UART_1, STM_PIN_DATA(STM_MODE_INPUT, GPIO_PULLUP, 3)}, // GPIO_Remap_USART1
Anna Bridge 186:707f6e361f3e 148 {PB_11, UART_3, STM_PIN_DATA(STM_MODE_INPUT, GPIO_PULLUP, 0)},
Anna Bridge 186:707f6e361f3e 149 {PC_11, UART_3, STM_PIN_DATA(STM_MODE_INPUT, GPIO_PULLUP, 5)}, // GPIO_PartialRemap_USART3
Anna Bridge 186:707f6e361f3e 150 {NC, NC, 0}
<> 149:156823d33999 151 };
<> 149:156823d33999 152
AnnaBridge 181:57724642e740 153 MBED_WEAK const PinMap PinMap_UART_RTS[] = {
Anna Bridge 186:707f6e361f3e 154 {PA_1, UART_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, 0)},
Anna Bridge 186:707f6e361f3e 155 {PA_12, UART_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, 0)},
Anna Bridge 186:707f6e361f3e 156 {PB_14, UART_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, 0)},
Anna Bridge 186:707f6e361f3e 157 {NC, NC, 0}
<> 152:9a67f0b066fc 158 };
<> 152:9a67f0b066fc 159
AnnaBridge 181:57724642e740 160 MBED_WEAK const PinMap PinMap_UART_CTS[] = {
Anna Bridge 186:707f6e361f3e 161 {PA_0, UART_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, 0)},
Anna Bridge 186:707f6e361f3e 162 {PA_11, UART_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, 0)},
Anna Bridge 186:707f6e361f3e 163 {PB_13, UART_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, 0)},
Anna Bridge 186:707f6e361f3e 164 {NC, NC, 0}
<> 152:9a67f0b066fc 165 };
<> 152:9a67f0b066fc 166
<> 149:156823d33999 167 //*** SPI ***
<> 149:156823d33999 168
AnnaBridge 181:57724642e740 169 MBED_WEAK const PinMap PinMap_SPI_MOSI[] = {
Anna Bridge 186:707f6e361f3e 170 {PA_7, SPI_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, 0)},
Anna Bridge 186:707f6e361f3e 171 {PB_5, SPI_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, 1)}, // GPIO_Remap_SPI1
Anna Bridge 186:707f6e361f3e 172 {PB_15, SPI_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, 0)},
Anna Bridge 186:707f6e361f3e 173 {NC, NC, 0}
<> 149:156823d33999 174 };
<> 149:156823d33999 175
AnnaBridge 181:57724642e740 176 MBED_WEAK const PinMap PinMap_SPI_MISO[] = {
Anna Bridge 186:707f6e361f3e 177 {PA_6, SPI_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, 0)},
Anna Bridge 186:707f6e361f3e 178 {PB_4, SPI_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, 1)}, // GPIO_Remap_SPI1
Anna Bridge 186:707f6e361f3e 179 {PB_14, SPI_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, 0)},
Anna Bridge 186:707f6e361f3e 180 {NC, NC, 0}
<> 149:156823d33999 181 };
<> 149:156823d33999 182
AnnaBridge 181:57724642e740 183 MBED_WEAK const PinMap PinMap_SPI_SCLK[] = {
Anna Bridge 186:707f6e361f3e 184 {PA_5, SPI_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, 0)}, // Connected to LD2 [Green Led]
Anna Bridge 186:707f6e361f3e 185 {PB_3, SPI_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, 1)}, // GPIO_Remap_SPI1 // Connected to SWO
Anna Bridge 186:707f6e361f3e 186 {PB_13, SPI_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, 0)},
Anna Bridge 186:707f6e361f3e 187 {NC, NC, 0}
<> 149:156823d33999 188 };
<> 149:156823d33999 189
AnnaBridge 181:57724642e740 190 MBED_WEAK const PinMap PinMap_SPI_SSEL[] = {
Anna Bridge 186:707f6e361f3e 191 {PA_4, SPI_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, 0)},
Anna Bridge 186:707f6e361f3e 192 {PA_15, SPI_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, 1)}, // GPIO_Remap_SPI1
Anna Bridge 186:707f6e361f3e 193 {PB_12, SPI_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, 0)},
Anna Bridge 186:707f6e361f3e 194 {NC, NC, 0}
<> 149:156823d33999 195 };
<> 149:156823d33999 196
Anna Bridge 186:707f6e361f3e 197 //*** CAN ***
Anna Bridge 186:707f6e361f3e 198
AnnaBridge 181:57724642e740 199 MBED_WEAK const PinMap PinMap_CAN_RD[] = {
Anna Bridge 186:707f6e361f3e 200 {PA_11, CAN_1, STM_PIN_DATA(STM_MODE_INPUT, GPIO_NOPULL, 0)},
Anna Bridge 186:707f6e361f3e 201 {PB_8, CAN_1, STM_PIN_DATA(STM_MODE_INPUT, GPIO_NOPULL, 10)}, // Remap CAN_RX to PB_8
Anna Bridge 186:707f6e361f3e 202 {NC, NC, 0}
<> 149:156823d33999 203 };
<> 149:156823d33999 204
AnnaBridge 181:57724642e740 205 MBED_WEAK const PinMap PinMap_CAN_TD[] = {
Anna Bridge 186:707f6e361f3e 206 {PA_12, CAN_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, 0)},
Anna Bridge 186:707f6e361f3e 207 {PB_9, CAN_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, 10)}, // Remap CAN_TX to PB_9
Anna Bridge 186:707f6e361f3e 208 {NC, NC, 0}
<> 149:156823d33999 209 };