mbed client on ethernet with LWIP
Dependencies: mbed Socket lwip-eth lwip-sys lwip
Fork of mbed-client-classic-example-lwip by
mbed-client-c/nsdl-c/sn_coap_header.h
- Committer:
- mbedAustin
- Date:
- 2016-06-09
- Revision:
- 11:cada08fc8a70
File content as of revision 11:cada08fc8a70:
/* * Copyright (c) 2011-2015 ARM Limited. All rights reserved. * SPDX-License-Identifier: Apache-2.0 * Licensed under the Apache License, Version 2.0 (the License); you may * not use this file except in compliance with the License. * You may obtain a copy of the License at * * http://www.apache.org/licenses/LICENSE-2.0 * * Unless required by applicable law or agreed to in writing, software * distributed under the License is distributed on an AS IS BASIS, WITHOUT * WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. * See the License for the specific language governing permissions and * limitations under the License. */ /** * \file sn_coap_header.h * * \brief CoAP C-library User header interface header file */ #ifndef SN_COAP_HEADER_H_ #define SN_COAP_HEADER_H_ #ifdef __cplusplus extern "C" { #endif /* Handle structure */ struct coap_s; /* * * * * * * * * * * * * * */ /* * * * ENUMERATIONS * * * */ /* * * * * * * * * * * * * * */ /** * \brief Enumeration for CoAP Version */ typedef enum coap_version_ { COAP_VERSION_1 = 0x40, COAP_VERSION_UNKNOWN = 0xFF } coap_version_e; /** * \brief Enumeration for CoAP Message type, used in CoAP Header */ typedef enum sn_coap_msg_type_ { COAP_MSG_TYPE_CONFIRMABLE = 0x00, /**< Reliable Request messages */ COAP_MSG_TYPE_NON_CONFIRMABLE = 0x10, /**< Non-reliable Request and Response messages */ COAP_MSG_TYPE_ACKNOWLEDGEMENT = 0x20, /**< Response to a Confirmable Request */ COAP_MSG_TYPE_RESET = 0x30 /**< Answer a Bad Request */ } sn_coap_msg_type_e; /** * \brief Enumeration for CoAP Message code, used in CoAP Header */ typedef enum sn_coap_msg_code_ { COAP_MSG_CODE_EMPTY = 0, COAP_MSG_CODE_REQUEST_GET = 1, COAP_MSG_CODE_REQUEST_POST = 2, COAP_MSG_CODE_REQUEST_PUT = 3, COAP_MSG_CODE_REQUEST_DELETE = 4, COAP_MSG_CODE_RESPONSE_CREATED = 65, COAP_MSG_CODE_RESPONSE_DELETED = 66, COAP_MSG_CODE_RESPONSE_VALID = 67, COAP_MSG_CODE_RESPONSE_CHANGED = 68, COAP_MSG_CODE_RESPONSE_CONTENT = 69, COAP_MSG_CODE_RESPONSE_BAD_REQUEST = 128, COAP_MSG_CODE_RESPONSE_UNAUTHORIZED = 129, COAP_MSG_CODE_RESPONSE_BAD_OPTION = 130, COAP_MSG_CODE_RESPONSE_FORBIDDEN = 131, COAP_MSG_CODE_RESPONSE_NOT_FOUND = 132, COAP_MSG_CODE_RESPONSE_METHOD_NOT_ALLOWED = 133, COAP_MSG_CODE_RESPONSE_NOT_ACCEPTABLE = 134, COAP_MSG_CODE_RESPONSE_REQUEST_ENTITY_INCOMPLETE = 136, COAP_MSG_CODE_RESPONSE_PRECONDITION_FAILED = 140, COAP_MSG_CODE_RESPONSE_REQUEST_ENTITY_TOO_LARGE = 141, COAP_MSG_CODE_RESPONSE_UNSUPPORTED_CONTENT_FORMAT = 143, COAP_MSG_CODE_RESPONSE_INTERNAL_SERVER_ERROR = 160, COAP_MSG_CODE_RESPONSE_NOT_IMPLEMENTED = 161, COAP_MSG_CODE_RESPONSE_BAD_GATEWAY = 162, COAP_MSG_CODE_RESPONSE_SERVICE_UNAVAILABLE = 163, COAP_MSG_CODE_RESPONSE_GATEWAY_TIMEOUT = 164, COAP_MSG_CODE_RESPONSE_PROXYING_NOT_SUPPORTED = 165 } sn_coap_msg_code_e; /** * \brief Enumeration for CoAP Option number, used in CoAP Header */ typedef enum sn_coap_option_numbers_ { COAP_OPTION_IF_MATCH = 1, COAP_OPTION_URI_HOST = 3, COAP_OPTION_ETAG = 4, COAP_OPTION_IF_NONE_MATCH = 5, COAP_OPTION_OBSERVE = 6, COAP_OPTION_URI_PORT = 7, COAP_OPTION_LOCATION_PATH = 8, COAP_OPTION_URI_PATH = 11, COAP_OPTION_CONTENT_FORMAT = 12, COAP_OPTION_MAX_AGE = 14, COAP_OPTION_URI_QUERY = 15, COAP_OPTION_ACCEPT = 17, COAP_OPTION_LOCATION_QUERY = 20, COAP_OPTION_BLOCK2 = 23, COAP_OPTION_BLOCK1 = 27, COAP_OPTION_PROXY_URI = 35, COAP_OPTION_PROXY_SCHEME = 39, COAP_OPTION_SIZE1 = 60 // 128 = (Reserved) // 132 = (Reserved) // 136 = (Reserved) } sn_coap_option_numbers_e; /** * \brief Enumeration for CoAP Content Format codes */ typedef enum sn_coap_content_format_ { COAP_CT_NONE = -1, COAP_CT_TEXT_PLAIN = 0, COAP_CT_LINK_FORMAT = 40, COAP_CT_XML = 41, COAP_CT_OCTET_STREAM = 42, COAP_CT_EXI = 47, COAP_CT_JSON = 50 } sn_coap_content_format_e; /** * \brief Enumeration for CoAP status, used in CoAP Header */ typedef enum sn_coap_status_ { COAP_STATUS_OK = 0, /**< Default value is OK */ COAP_STATUS_PARSER_ERROR_IN_HEADER = 1, /**< CoAP will send Reset message to invalid message sender */ COAP_STATUS_PARSER_DUPLICATED_MSG = 2, /**< CoAP will send Acknowledgement message to duplicated message sender */ COAP_STATUS_PARSER_BLOCKWISE_MSG_RECEIVING = 3, /**< User will get whole message after all message blocks received. User must release messages with this status. */ COAP_STATUS_PARSER_BLOCKWISE_ACK = 4, /**< Acknowledgement for sent Blockwise message received */ COAP_STATUS_PARSER_BLOCKWISE_MSG_REJECTED = 5, /**< Blockwise message received but not supported by compiling switch */ COAP_STATUS_PARSER_BLOCKWISE_MSG_RECEIVED = 6, /**< Blockwise message fully received and returned to app. User must take care of releasing whole payload of the blockwise messages */ COAP_STATUS_BUILDER_MESSAGE_SENDING_FAILED = 7 /**< When re-transmissions have been done and ACK not received, CoAP library calls RX callback with this status */ } sn_coap_status_e; /* * * * * * * * * * * * * */ /* * * * STRUCTURES * * * */ /* * * * * * * * * * * * * */ /** * \brief Structure for CoAP Options */ typedef struct sn_coap_options_list_ { uint8_t max_age_len; /**< 0-4 bytes. */ uint8_t *max_age_ptr; /**< Must be set to NULL if not used */ uint16_t proxy_uri_len; /**< 1-1034 bytes. */ uint8_t *proxy_uri_ptr; /**< Must be set to NULL if not used */ uint8_t etag_len; /**< 1-8 bytes. Repeatable */ uint8_t *etag_ptr; /**< Must be set to NULL if not used */ uint16_t uri_host_len; /**< 1-255 bytes. */ uint8_t *uri_host_ptr; /**< Must be set to NULL if not used */ uint16_t location_path_len; /**< 0-255 bytes. Repeatable */ uint8_t *location_path_ptr; /**< Must be set to NULL if not used */ uint8_t uri_port_len; /**< 0-2 bytes. */ uint8_t *uri_port_ptr; /**< Must be set to NULL if not used */ uint16_t location_query_len; /**< 0-255 bytes. Repeatable */ uint8_t *location_query_ptr; /**< Must be set to NULL if not used */ uint8_t observe; uint8_t observe_len; /**< 0-2 bytes. */ uint8_t *observe_ptr; /**< Must be set to NULL if not used */ uint8_t accept_len; /**< 0-2 bytes. Repeatable */ uint8_t *accept_ptr; /**< Must be set to NULL if not used */ uint16_t uri_query_len; /**< 1-255 bytes. Repeatable */ uint8_t *uri_query_ptr; /**< Must be set to NULL if not used */ uint8_t block1_len; /**< 0-3 bytes. */ uint8_t *block1_ptr; /**< Not for User */ uint8_t block2_len; /**< 0-3 bytes. */ uint8_t *block2_ptr; /**< Not for User */ } sn_coap_options_list_s; /* !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! */ /* !!! Main CoAP message struct !!! */ /* !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! */ /** * \brief Main CoAP message struct */ typedef struct sn_coap_hdr_ { sn_coap_status_e coap_status; /**< Used for telling to User special cases when parsing message */ /* * * * * * * * * * * */ /* * * * Header * * * */ /* * * * * * * * * * * */ sn_coap_msg_type_e msg_type; /**< Confirmable, Non-Confirmable, Acknowledgement or Reset */ sn_coap_msg_code_e msg_code; /**< Empty: 0; Requests: 1-31; Responses: 64-191 */ uint16_t msg_id; /**< Message ID. Parser sets parsed message ID, builder sets message ID of built coap message */ /* * * * * * * * * * * */ /* * * * Options * * * */ /* * * * * * * * * * * */ /* Here are most often used Options */ uint16_t uri_path_len; /**< 0-255 bytes. Repeatable. */ uint8_t *uri_path_ptr; /**< Must be set to NULL if not used. E.g: temp1/temp2 */ uint8_t token_len; /**< 1-8 bytes. */ uint8_t *token_ptr; /**< Must be set to NULL if not used */ uint8_t content_type_len; /**< 0-2 bytes. */ uint8_t *content_type_ptr; /**< Must be set to NULL if not used */ /* Here are not so often used Options */ sn_coap_options_list_s *options_list_ptr; /**< Must be set to NULL if not used */ /* * * * * * * * * * * */ /* * * * Payload * * * */ /* * * * * * * * * * * */ uint16_t payload_len; /**< Must be set to zero if not used */ uint8_t *payload_ptr; /**< Must be set to NULL if not used */ } sn_coap_hdr_s; /* * * * * * * * * * * * * * * * * * * * * * */ /* * * * EXTERNAL FUNCTION PROTOTYPES * * * */ /* * * * * * * * * * * * * * * * * * * * * * */ /** * \fn sn_coap_hdr_s *sn_coap_parser(struct coap_s *handle, uint16_t packet_data_len, uint8_t *packet_data_ptr, coap_version_e *coap_version_ptr) * * \brief Parses CoAP message from given Packet data * * \param *handle Pointer to CoAP library handle * * \param packet_data_len is length of given Packet data to be parsed to CoAP message * * \param *packet_data_ptr is source for Packet data to be parsed to CoAP message * * \param *coap_version_ptr is destination for parsed CoAP specification version * * \return Return value is pointer to parsed CoAP message.\n * In following failure cases NULL is returned:\n * -Failure in given pointer (= NULL)\n * -Failure in memory allocation (malloc() returns NULL) */ extern sn_coap_hdr_s *sn_coap_parser(struct coap_s *handle, uint16_t packet_data_len, uint8_t *packet_data_ptr, coap_version_e *coap_version_ptr); /** * \fn void sn_coap_parser_release_allocated_coap_msg_mem(struct coap_s *handle, sn_coap_hdr_s *freed_coap_msg_ptr) * * \brief Releases memory of given CoAP message * * Note!!! Does not release Payload part * * \param *handle Pointer to CoAP library handle * * \param *freed_coap_msg_ptr is pointer to released CoAP message */ extern void sn_coap_parser_release_allocated_coap_msg_mem(struct coap_s *handle, sn_coap_hdr_s *freed_coap_msg_ptr); /** * \fn int16_t sn_coap_builder(uint8_t *dst_packet_data_ptr, sn_coap_hdr_s *src_coap_msg_ptr) * * \brief Builds an outgoing message buffer from a CoAP header structure. * * \param *dst_packet_data_ptr is pointer to allocated destination to built CoAP packet * * \param *src_coap_msg_ptr is pointer to source structure for building Packet data * * \return Return value is byte count of built Packet data. In failure cases:\n * -1 = Failure in given CoAP header structure\n * -2 = Failure in given pointer (= NULL) */ extern int16_t sn_coap_builder(uint8_t *dst_packet_data_ptr, sn_coap_hdr_s *src_coap_msg_ptr); /** * \fn uint16_t sn_coap_builder_calc_needed_packet_data_size(sn_coap_hdr_s *src_coap_msg_ptr) * * \brief Calculates needed Packet data memory size for given CoAP message * * \param *src_coap_msg_ptr is pointer to data which needed Packet * data length is calculated * * \return Return value is count of needed memory as bytes for build Packet data * Null if failed */ extern uint16_t sn_coap_builder_calc_needed_packet_data_size(sn_coap_hdr_s *src_coap_msg_ptr); /** * \fn sn_coap_hdr_s *sn_coap_build_response(struct coap_s *handle, sn_coap_hdr_s *coap_packet_ptr, uint8_t msg_code) * * \brief Prepares generic response packet from a request packet. This function allocates memory for the resulting sn_coap_hdr_s * * \param *handle Pointer to CoAP library handle * \param *coap_packet_ptr The request packet pointer * \param msg_code response messages code * * \return *coap_packet_ptr The allocated and pre-filled response packet pointer * NULL Error in parsing the request * */ extern sn_coap_hdr_s *sn_coap_build_response(struct coap_s *handle, sn_coap_hdr_s *coap_packet_ptr, uint8_t msg_code); #ifdef __cplusplus } #endif #endif /* SN_COAP_HEADER_H_ */