Maxim Ibragimov
mbed library sources. Supersedes mbed-src. Fixed broken STM32F1xx RTC on rtc_api.c
Dependents: Nucleo_F103RB_RTC_battery_bkup_pwr_off_okay
Fork of
mbed-dev
by 
mbed official
Diff: targets/cmsis/TARGET_NXP/TARGET_LPC82X/LPC82x.h
- Revision:
- 144:ef7eb2e8f9f7
- Parent:
- 0:9b334a45a8ff
diff -r 423e1876dc07 -r ef7eb2e8f9f7 targets/cmsis/TARGET_NXP/TARGET_LPC82X/LPC82x.h
--- a/targets/cmsis/TARGET_NXP/TARGET_LPC82X/LPC82x.h Tue Aug 02 14:07:36 2016 +0000
+++ b/targets/cmsis/TARGET_NXP/TARGET_LPC82X/LPC82x.h Fri Sep 02 15:07:44 2016 +0100
@@ -1,1308 +1,1308 @@
-
-/****************************************************************************************************//**
- * @file LPC82x.h
- *
- * @brief CMSIS Cortex-M0PLUS Peripheral Access Layer Header File for
- * LPC82x from .
- *
- * @version V0.4
- * @date 17. June 2014
- *
- * @note Generated with SVDConv V2.80
- * from CMSIS SVD File 'LPC82x.svd' Version 0.4,
- *******************************************************************************************************/
-
-
-
-/** @addtogroup (null)
- * @{
- */
-
-/** @addtogroup LPC82x
- * @{
- */
-
-#ifndef LPC82X_H
-#define LPC82X_H
-
-#ifdef __cplusplus
-extern "C" {
-#endif
-
-
-/* ------------------------- Interrupt Number Definition ------------------------ */
-
-typedef enum {
-/* ----------------- Cortex-M0PLUS Processor Exceptions Numbers ----------------- */
- Reset_IRQn = -15, /*!< 1 Reset Vector, invoked on Power up and warm reset */
- NonMaskableInt_IRQn = -14, /*!< 2 Non maskable Interrupt, cannot be stopped or preempted */
- HardFault_IRQn = -13, /*!< 3 Hard Fault, all classes of Fault */
- SVCall_IRQn = -5, /*!< 11 System Service Call via SVC instruction */
- DebugMonitor_IRQn = -4, /*!< 12 Debug Monitor */
- PendSV_IRQn = -2, /*!< 14 Pendable request for system service */
- SysTick_IRQn = -1, /*!< 15 System Tick Timer */
-/* ---------------------- LPC82x Specific Interrupt Numbers --------------------- */
- SPI0_IRQn = 0, /*!< 0 SPI0 */
- SPI1_IRQn = 1, /*!< 1 SPI1 */
- UART0_IRQn = 3, /*!< 3 UART0 */
- UART1_IRQn = 4, /*!< 4 UART1 */
- UART2_IRQn = 5, /*!< 5 UART2 */
- I2C1_IRQn = 7, /*!< 7 I2C1 */
- I2C0_IRQn = 8, /*!< 8 I2C0 */
- SCT_IRQn = 9, /*!< 9 SCT */
- MRT_IRQn = 10, /*!< 10 MRT */
- CMP_IRQn = 11, /*!< 11 CMP */
- WDT_IRQn = 12, /*!< 12 WDT */
- BOD_IRQn = 13, /*!< 13 BOD */
- FLASH_IRQn = 14, /*!< 14 FLASH */
- WKT_IRQn = 15, /*!< 15 WKT */
- ADC_SEQA_IRQn = 16, /*!< 16 ADC_SEQA */
- ADC_SEQB_IRQn = 17, /*!< 17 ADC_SEQB */
- ADC_THCMP_IRQn = 18, /*!< 18 ADC_THCMP */
- ADC_OVR_IRQn = 19, /*!< 19 ADC_OVR */
- DMA_IRQn = 20, /*!< 20 DMA */
- I2C2_IRQn = 21, /*!< 21 I2C2 */
- I2C3_IRQn = 22, /*!< 22 I2C3 */
- PIN_INT0_IRQn = 24, /*!< 24 PIN_INT0 */
- PIN_INT1_IRQn = 25, /*!< 25 PIN_INT1 */
- PIN_INT2_IRQn = 26, /*!< 26 PIN_INT2 */
- PIN_INT3_IRQn = 27, /*!< 27 PIN_INT3 */
- PIN_INT4_IRQn = 28, /*!< 28 PIN_INT4 */
- PIN_INT5_IRQn = 29, /*!< 29 PIN_INT5 */
- PIN_INT6_IRQn = 30, /*!< 30 PIN_INT6 */
- PIN_INT7_IRQn = 31 /*!< 31 PIN_INT7 */
-} IRQn_Type;
-
-
-/** @addtogroup Configuration_of_CMSIS
- * @{
- */
-
-
-/* ================================================================================ */
-/* ================ Processor and Core Peripheral Section ================ */
-/* ================================================================================ */
-
-/* ----------------Configuration of the Cortex-M0PLUS Processor and Core Peripherals---------------- */
-#define __CM0PLUS_REV 0x0001 /*!< Cortex-M0PLUS Core Revision */
-#define __MPU_PRESENT 0 /*!< MPU present or not */
-#define __NVIC_PRIO_BITS 2 /*!< Number of Bits used for Priority Levels */
-#define __Vendor_SysTickConfig 0 /*!< Set to 1 if different SysTick Config is used */
-#define __VTOR_PRESENT 1 /*!< Set to 1 if CPU supports Vector Table Offset Register */
-/** @} */ /* End of group Configuration_of_CMSIS */
-
-#include "core_cm0plus.h" /*!< Cortex-M0PLUS processor and core peripherals */
-#include "system_LPC82x.h" /*!< LPC82x System */
-
-
-/* ================================================================================ */
-/* ================ Device Specific Peripheral Section ================ */
-/* ================================================================================ */
-
-
-/** @addtogroup Device_Peripheral_Registers
- * @{
- */
-
-
-/* ------------------- Start of section using anonymous unions ------------------ */
-#if defined(__CC_ARM)
- #pragma push
- #pragma anon_unions
-#elif defined(__ICCARM__)
- #pragma language=extended
-#elif defined(__GNUC__)
- /* anonymous unions are enabled by default */
-#elif defined(__TMS470__)
-/* anonymous unions are enabled by default */
-#elif defined(__TASKING__)
- #pragma warning 586
-#else
- #warning Not supported compiler type
-#endif
-
-
-
-/* ================================================================================ */
-/* ================ WWDT ================ */
-/* ================================================================================ */
-
-
-/**
- * @brief Windowed Watchdog Timer (WWDT) (WWDT)
- */
-
-typedef struct { /*!< (@ 0x40000000) WWDT Structure */
- __IO uint32_t MOD; /*!< (@ 0x40000000) Watchdog mode register. This register contains
- the basic mode and status of the Watchdog Timer. */
- __IO uint32_t TC; /*!< (@ 0x40000004) Watchdog timer constant register. This 24-bit
- register determines the time-out value. */
- __O uint32_t FEED; /*!< (@ 0x40000008) Watchdog feed sequence register. Writing 0xAA
- followed by 0x55 to this register reloads the Watchdog timer
- with the value contained in WDTC. */
- __I uint32_t TV; /*!< (@ 0x4000000C) Watchdog timer value register. This 24-bit register
- reads out the current value of the Watchdog timer. */
- __I uint32_t RESERVED0;
- __IO uint32_t WARNINT; /*!< (@ 0x40000014) Watchdog Warning Interrupt compare value. */
- __IO uint32_t WINDOW; /*!< (@ 0x40000018) Watchdog Window compare value. */
-} LPC_WWDT_Type;
-
-
-/* ================================================================================ */
-/* ================ MRT ================ */
-/* ================================================================================ */
-
-
-/**
- * @brief Multi-Rate Timer (MRT) (MRT)
- */
-
-typedef struct { /*!< (@ 0x40004000) MRT Structure */
- __IO uint32_t INTVAL0; /*!< (@ 0x40004000) MRT0 Time interval value register. This value
- is loaded into the TIMER0 register. */
- __I uint32_t TIMER0; /*!< (@ 0x40004004) MRT0 Timer register. This register reads the
- value of the down-counter. */
- __IO uint32_t CTRL0; /*!< (@ 0x40004008) MRT0 Control register. This register controls
- the MRT0 modes. */
- __IO uint32_t STAT0; /*!< (@ 0x4000400C) MRT0 Status register. */
- __IO uint32_t INTVAL1; /*!< (@ 0x40004010) MRT0 Time interval value register. This value
- is loaded into the TIMER0 register. */
- __I uint32_t TIMER1; /*!< (@ 0x40004014) MRT0 Timer register. This register reads the
- value of the down-counter. */
- __IO uint32_t CTRL1; /*!< (@ 0x40004018) MRT0 Control register. This register controls
- the MRT0 modes. */
- __IO uint32_t STAT1; /*!< (@ 0x4000401C) MRT0 Status register. */
- __IO uint32_t INTVAL2; /*!< (@ 0x40004020) MRT0 Time interval value register. This value
- is loaded into the TIMER0 register. */
- __I uint32_t TIMER2; /*!< (@ 0x40004024) MRT0 Timer register. This register reads the
- value of the down-counter. */
- __IO uint32_t CTRL2; /*!< (@ 0x40004028) MRT0 Control register. This register controls
- the MRT0 modes. */
- __IO uint32_t STAT2; /*!< (@ 0x4000402C) MRT0 Status register. */
- __IO uint32_t INTVAL3; /*!< (@ 0x40004030) MRT0 Time interval value register. This value
- is loaded into the TIMER0 register. */
- __I uint32_t TIMER3; /*!< (@ 0x40004034) MRT0 Timer register. This register reads the
- value of the down-counter. */
- __IO uint32_t CTRL3; /*!< (@ 0x40004038) MRT0 Control register. This register controls
- the MRT0 modes. */
- __IO uint32_t STAT3; /*!< (@ 0x4000403C) MRT0 Status register. */
- __I uint32_t RESERVED0[45];
- __I uint32_t IDLE_CH; /*!< (@ 0x400040F4) Idle channel register. This register returns
- the number of the first idle channel. */
- __IO uint32_t IRQ_FLAG; /*!< (@ 0x400040F8) Global interrupt flag register */
-} LPC_MRT_Type;
-
-
-/* ================================================================================ */
-/* ================ WKT ================ */
-/* ================================================================================ */
-
-
-/**
- * @brief Self wake-up timer (WKT) (WKT)
- */
-
-typedef struct { /*!< (@ 0x40008000) WKT Structure */
- __IO uint32_t CTRL; /*!< (@ 0x40008000) Self wake-up timer control register. */
- __I uint32_t RESERVED0[2];
- __IO uint32_t COUNT; /*!< (@ 0x4000800C) Counter register. */
-} LPC_WKT_Type;
-
-
-/* ================================================================================ */
-/* ================ SWM ================ */
-/* ================================================================================ */
-
-
-/**
- * @brief Switch matrix (SWM) (SWM)
- */
-
-typedef struct { /*!< (@ 0x4000C000) SWM Structure */
- union {
- __IO uint32_t PINASSIGN[12];
- struct {
- __IO uint32_t PINASSIGN0; /*!< (@ 0x4000C000) Pin assign register 0. Assign movable functions
- U0_TXD, U0_RXD, U0_RTS, U0_CTS. */
- __IO uint32_t PINASSIGN1; /*!< (@ 0x4000C004) Pin assign register 1. Assign movable functions
- U0_SCLK, U1_TXD, U1_RXD, U1_RTS. */
- __IO uint32_t PINASSIGN2; /*!< (@ 0x4000C008) Pin assign register 2. Assign movable functions
- U1_CTS, U1_SCLK, U2_TXD, U2_RXD. */
- __IO uint32_t PINASSIGN3; /*!< (@ 0x4000C00C) Pin assign register 3. Assign movable function
- U2_RTS, U2_CTS, U2_SCLK, SPI0_SCK. */
- __IO uint32_t PINASSIGN4; /*!< (@ 0x4000C010) Pin assign register 4. Assign movable functions
- SPI0_MOSI, SPI0_MISO, SPI0_SSEL0, SPI0_SSEL1. */
- __IO uint32_t PINASSIGN5; /*!< (@ 0x4000C014) Pin assign register 5. Assign movable functions
- SPI0_SSEL2, SPI0_SSEL3, SPI1_SCK, SPI1_MOSI */
- __IO uint32_t PINASSIGN6; /*!< (@ 0x4000C018) Pin assign register 6. Assign movable functions
- SPI1_MISO, SPI1_SSEL0, SPI1_SSEL1, SCT0_IN0. */
- __IO uint32_t PINASSIGN7; /*!< (@ 0x4000C01C) Pin assign register 7. Assign movable functions
- SCT_IN1, SCT_IN2, SCT_IN3, SCT_OUT0. */
- __IO uint32_t PINASSIGN8; /*!< (@ 0x4000C020) Pin assign register 8. Assign movable functions
- SCT_OUT1, SCT_OUT2, SCT_OUT3, SCT_OUT4. */
- __IO uint32_t PINASSIGN9; /*!< (@ 0x4000C024) Pin assign register 9. Assign movable functions
- SCT_OUT5, I2C1_SDA, I2C1_SCL, I2C2_SDA. */
- __IO uint32_t PINASSIGN10; /*!< (@ 0x4000C028) Pin assign register 10. Assign movable functions
- I2C2_SCL, I2C3_SDA, I2C3_SCL, ADC_PINTRIG0. */
- __IO uint32_t PINASSIGN11; /*!< (@ 0x4000C02C) Pin assign register 11. Assign movable functions
- ADC_PINTRIG1, ACMP_O, CLKOUT, GPIO_INT_BMAT */
- };
- };
- __I uint32_t RESERVED0[100];
- __IO uint32_t PINENABLE0; /*!< (@ 0x4000C1C0) Pin enable register 0. Enables fixed-pin functions
- ACMP_I0, ACMP_I1, SWCLK, SWDIO, XTALIN, XTALOUT, RESET, CLKIN,
- VDDCMP. */
-} LPC_SWM_Type;
-
-
-/* ================================================================================ */
-/* ================ ADC ================ */
-/* ================================================================================ */
-
-
-/**
- * @brief 12-bit Analog-to-Digital Converter (ADC) (ADC)
- */
-
-typedef struct { /*!< (@ 0x4001C000) ADC Structure */
- __IO uint32_t CTRL; /*!< (@ 0x4001C000) A/D Control Register. Contains the clock divide
- value, enable bits for each sequence and the A/D power-down
- bit. */
- __I uint32_t RESERVED0;
- __IO uint32_t SEQA_CTRL; /*!< (@ 0x4001C008) A/D Conversion Sequence-A control Register: Controls
- triggering and channel selection for conversion sequence-A.
- Also specifies interrupt mode for sequence-A. */
- __IO uint32_t SEQB_CTRL; /*!< (@ 0x4001C00C) A/D Conversion Sequence-B Control Register: Controls
- triggering and channel selection for conversion sequence-B.
- Also specifies interrupt mode for sequence-B. */
- __IO uint32_t SEQA_GDAT; /*!< (@ 0x4001C010) A/D Sequence-A Global Data Register. This register
- contains the result of the most recent A/D conversion performed
- under sequence-A */
- __IO uint32_t SEQB_GDAT; /*!< (@ 0x4001C014) A/D Sequence-B Global Data Register. This register
- contains the result of the most recent A/D conversion performed
- under sequence-B */
- __I uint32_t RESERVED1[2];
- __I uint32_t DAT0; /*!< (@ 0x4001C020) A/D Channel 0 Data Register. This register contains
- the result of the most recent conversion completed on channel
- 0. */
- __I uint32_t DAT1; /*!< (@ 0x4001C024) A/D Channel 0 Data Register. This register contains
- the result of the most recent conversion completed on channel
- 0. */
- __I uint32_t DAT2; /*!< (@ 0x4001C028) A/D Channel 0 Data Register. This register contains
- the result of the most recent conversion completed on channel
- 0. */
- __I uint32_t DAT3; /*!< (@ 0x4001C02C) A/D Channel 0 Data Register. This register contains
- the result of the most recent conversion completed on channel
- 0. */
- __I uint32_t DAT4; /*!< (@ 0x4001C030) A/D Channel 0 Data Register. This register contains
- the result of the most recent conversion completed on channel
- 0. */
- __I uint32_t DAT5; /*!< (@ 0x4001C034) A/D Channel 0 Data Register. This register contains
- the result of the most recent conversion completed on channel
- 0. */
- __I uint32_t DAT6; /*!< (@ 0x4001C038) A/D Channel 0 Data Register. This register contains
- the result of the most recent conversion completed on channel
- 0. */
- __I uint32_t DAT7; /*!< (@ 0x4001C03C) A/D Channel 0 Data Register. This register contains
- the result of the most recent conversion completed on channel
- 0. */
- __I uint32_t DAT8; /*!< (@ 0x4001C040) A/D Channel 0 Data Register. This register contains
- the result of the most recent conversion completed on channel
- 0. */
- __I uint32_t DAT9; /*!< (@ 0x4001C044) A/D Channel 0 Data Register. This register contains
- the result of the most recent conversion completed on channel
- 0. */
- __I uint32_t DAT10; /*!< (@ 0x4001C048) A/D Channel 0 Data Register. This register contains
- the result of the most recent conversion completed on channel
- 0. */
- __I uint32_t DAT11; /*!< (@ 0x4001C04C) A/D Channel 0 Data Register. This register contains
- the result of the most recent conversion completed on channel
- 0. */
- __IO uint32_t THR0_LOW; /*!< (@ 0x4001C050) A/D Low Compare Threshold Register 0 : Contains
- the lower threshold level for automatic threshold comparison
- for any channels linked to threshold pair 0. */
- __IO uint32_t THR1_LOW; /*!< (@ 0x4001C054) A/D Low Compare Threshold Register 1: Contains
- the lower threshold level for automatic threshold comparison
- for any channels linked to threshold pair 1. */
- __IO uint32_t THR0_HIGH; /*!< (@ 0x4001C058) A/D High Compare Threshold Register 0: Contains
- the upper threshold level for automatic threshold comparison
- for any channels linked to threshold pair 0. */
- __IO uint32_t THR1_HIGH; /*!< (@ 0x4001C05C) A/D High Compare Threshold Register 1: Contains
- the upper threshold level for automatic threshold comparison
- for any channels linked to threshold pair 1. */
- __IO uint32_t CHAN_THRSEL; /*!< (@ 0x4001C060) A/D Channel-Threshold Select Register. Specifies
- which set of threshold compare registers are to be used for
- each channel */
- __IO uint32_t INTEN; /*!< (@ 0x4001C064) A/D Interrupt Enable Register. This register
- contains enable bits that enable the sequence-A, sequence-B,
- threshold compare and data overrun interrupts to be generated. */
- __IO uint32_t FLAGS; /*!< (@ 0x4001C068) A/D Flags Register. Contains the four interrupt
- request flags and the individual component overrun and threshold-compare
- flags. (The overrun bits replicate information stored in the
- result registers). */
- __IO uint32_t TRM; /*!< (@ 0x4001C06C) ADC trim register. */
-} LPC_ADC_Type;
-
-
-/* ================================================================================ */
-/* ================ PMU ================ */
-/* ================================================================================ */
-
-
-/**
- * @brief Power Management Unit (PMU) (PMU)
- */
-
-typedef struct { /*!< (@ 0x40020000) PMU Structure */
- __IO uint32_t PCON; /*!< (@ 0x40020000) Power control register */
- __IO uint32_t GPREG0; /*!< (@ 0x40020004) General purpose register 0 */
- __IO uint32_t GPREG1; /*!< (@ 0x40020008) General purpose register 0 */
- __IO uint32_t GPREG2; /*!< (@ 0x4002000C) General purpose register 0 */
- __IO uint32_t GPREG3; /*!< (@ 0x40020010) General purpose register 0 */
- __IO uint32_t DPDCTRL; /*!< (@ 0x40020014) Deep power-down control register. Also includes
- bits for general purpose storage. */
-} LPC_PMU_Type;
-
-
-/* ================================================================================ */
-/* ================ CMP ================ */
-/* ================================================================================ */
-
-
-/**
- * @brief Analog comparator (CMP)
- */
-
-typedef struct { /*!< (@ 0x40024000) CMP Structure */
- __IO uint32_t CTRL; /*!< (@ 0x40024000) Comparator control register */
- __IO uint32_t LAD; /*!< (@ 0x40024004) Voltage ladder register */
-} LPC_CMP_Type;
-
-
-/* ================================================================================ */
-/* ================ DMATRIGMUX ================ */
-/* ================================================================================ */
-
-
-/**
- * @brief DMA trigger mux (DMATRIGMUX)
- */
-
-typedef struct { /*!< (@ 0x40028000) DMATRIGMUX Structure */
- __IO uint32_t DMA_ITRIG_INMUX0; /*!< (@ 0x40028000) Input mux register for trigger inputs 0 to 23
- connected to DMA channel 0. Selects from ADC, SCT, ACMP, pin
- interrupts, and DMA requests. */
- __IO uint32_t DMA_ITRIG_INMUX1; /*!< (@ 0x40028004) Input mux register for trigger inputs 0 to 23
- connected to DMA channel 0. Selects from ADC, SCT, ACMP, pin
- interrupts, and DMA requests. */
- __IO uint32_t DMA_ITRIG_INMUX2; /*!< (@ 0x40028008) Input mux register for trigger inputs 0 to 23
- connected to DMA channel 0. Selects from ADC, SCT, ACMP, pin
- interrupts, and DMA requests. */
- __IO uint32_t DMA_ITRIG_INMUX3; /*!< (@ 0x4002800C) Input mux register for trigger inputs 0 to 23
- connected to DMA channel 0. Selects from ADC, SCT, ACMP, pin
- interrupts, and DMA requests. */
- __IO uint32_t DMA_ITRIG_INMUX4; /*!< (@ 0x40028010) Input mux register for trigger inputs 0 to 23
- connected to DMA channel 0. Selects from ADC, SCT, ACMP, pin
- interrupts, and DMA requests. */
- __IO uint32_t DMA_ITRIG_INMUX5; /*!< (@ 0x40028014) Input mux register for trigger inputs 0 to 23
- connected to DMA channel 0. Selects from ADC, SCT, ACMP, pin
- interrupts, and DMA requests. */
- __IO uint32_t DMA_ITRIG_INMUX6; /*!< (@ 0x40028018) Input mux register for trigger inputs 0 to 23
- connected to DMA channel 0. Selects from ADC, SCT, ACMP, pin
- interrupts, and DMA requests. */
- __IO uint32_t DMA_ITRIG_INMUX7; /*!< (@ 0x4002801C) Input mux register for trigger inputs 0 to 23
- connected to DMA channel 0. Selects from ADC, SCT, ACMP, pin
- interrupts, and DMA requests. */
- __IO uint32_t DMA_ITRIG_INMUX8; /*!< (@ 0x40028020) Input mux register for trigger inputs 0 to 23
- connected to DMA channel 0. Selects from ADC, SCT, ACMP, pin
- interrupts, and DMA requests. */
- __IO uint32_t DMA_ITRIG_INMUX9; /*!< (@ 0x40028024) Input mux register for trigger inputs 0 to 23
- connected to DMA channel 0. Selects from ADC, SCT, ACMP, pin
- interrupts, and DMA requests. */
- __IO uint32_t DMA_ITRIG_INMUX10; /*!< (@ 0x40028028) Input mux register for trigger inputs 0 to 23
- connected to DMA channel 0. Selects from ADC, SCT, ACMP, pin
- interrupts, and DMA requests. */
- __IO uint32_t DMA_ITRIG_INMUX11; /*!< (@ 0x4002802C) Input mux register for trigger inputs 0 to 23
- connected to DMA channel 0. Selects from ADC, SCT, ACMP, pin
- interrupts, and DMA requests. */
- __IO uint32_t DMA_ITRIG_INMUX12; /*!< (@ 0x40028030) Input mux register for trigger inputs 0 to 23
- connected to DMA channel 0. Selects from ADC, SCT, ACMP, pin
- interrupts, and DMA requests. */
- __IO uint32_t DMA_ITRIG_INMUX13; /*!< (@ 0x40028034) Input mux register for trigger inputs 0 to 23
- connected to DMA channel 0. Selects from ADC, SCT, ACMP, pin
- interrupts, and DMA requests. */
- __IO uint32_t DMA_ITRIG_INMUX14; /*!< (@ 0x40028038) Input mux register for trigger inputs 0 to 23
- connected to DMA channel 0. Selects from ADC, SCT, ACMP, pin
- interrupts, and DMA requests. */
- __IO uint32_t DMA_ITRIG_INMUX15; /*!< (@ 0x4002803C) Input mux register for trigger inputs 0 to 23
- connected to DMA channel 0. Selects from ADC, SCT, ACMP, pin
- interrupts, and DMA requests. */
- __IO uint32_t DMA_ITRIG_INMUX16; /*!< (@ 0x40028040) Input mux register for trigger inputs 0 to 23
- connected to DMA channel 0. Selects from ADC, SCT, ACMP, pin
- interrupts, and DMA requests. */
- __IO uint32_t DMA_ITRIG_INMUX17; /*!< (@ 0x40028044) Input mux register for trigger inputs 0 to 23
- connected to DMA channel 0. Selects from ADC, SCT, ACMP, pin
- interrupts, and DMA requests. */
-} LPC_DMATRIGMUX_Type;
-
-
-/* ================================================================================ */
-/* ================ INPUTMUX ================ */
-/* ================================================================================ */
-
-
-/**
- * @brief Input multiplexing (INPUTMUX)
- */
-
-typedef struct { /*!< (@ 0x4002C000) INPUTMUX Structure */
- __IO uint32_t DMA_INMUX_INMUX0; /*!< (@ 0x4002C000) Input mux register for DMA trigger input 20.
- Selects from 18 DMA trigger outputs. */
- __IO uint32_t DMA_INMUX_INMUX1; /*!< (@ 0x4002C004) Input mux register for DMA trigger input 20.
- Selects from 18 DMA trigger outputs. */
- __I uint32_t RESERVED0[6];
- __IO uint32_t SCT0_INMUX0; /*!< (@ 0x4002C020) Input mux register for SCT input 0 */
- __IO uint32_t SCT0_INMUX1; /*!< (@ 0x4002C024) Input mux register for SCT input 0 */
- __IO uint32_t SCT0_INMUX2; /*!< (@ 0x4002C028) Input mux register for SCT input 0 */
- __IO uint32_t SCT0_INMUX3; /*!< (@ 0x4002C02C) Input mux register for SCT input 0 */
-} LPC_INPUTMUX_Type;
-
-
-/* ================================================================================ */
-/* ================ FLASHCTRL ================ */
-/* ================================================================================ */
-
-
-/**
- * @brief Flash controller (FLASHCTRL)
- */
-
-typedef struct { /*!< (@ 0x40040000) FLASHCTRL Structure */
- __I uint32_t RESERVED0[4];
- __IO uint32_t FLASHCFG; /*!< (@ 0x40040010) Flash configuration register */
- __I uint32_t RESERVED1[3];
- __IO uint32_t FMSSTART; /*!< (@ 0x40040020) Signature start address register */
- __IO uint32_t FMSSTOP; /*!< (@ 0x40040024) Signature stop-address register */
- __I uint32_t RESERVED2;
- __I uint32_t FMSW0; /*!< (@ 0x4004002C) Signature Word */
-} LPC_FLASHCTRL_Type;
-
-
-/* ================================================================================ */
-/* ================ IOCON ================ */
-/* ================================================================================ */
-
-
-/**
- * @brief I/O configuration (IOCON) (IOCON)
- */
-
-typedef struct { /*!< (@ 0x40044000) IOCON Structure */
- __IO uint32_t PIO0_17; /*!< (@ 0x40044000) I/O configuration for pin PIO0_17 */
- __IO uint32_t PIO0_13; /*!< (@ 0x40044004) I/O configuration for pin PIO0_13 */
- __IO uint32_t PIO0_12; /*!< (@ 0x40044008) I/O configuration for pin PIO0_12 */
- __IO uint32_t PIO0_5; /*!< (@ 0x4004400C) I/O configuration for pin PIO0_5/RESET */
- __IO uint32_t PIO0_4; /*!< (@ 0x40044010) I/O configuration for pin PIO0_4 */
- __IO uint32_t PIO0_3; /*!< (@ 0x40044014) I/O configuration for pin PIO0_3/SWCLK */
- __IO uint32_t PIO0_2; /*!< (@ 0x40044018) I/O configuration for pin PIO0_2/SWDIO */
- __IO uint32_t PIO0_11; /*!< (@ 0x4004401C) I/O configuration for pin PIO0_11. This is the
- pin configuration for the true open-drain pin. */
- __IO uint32_t PIO0_10; /*!< (@ 0x40044020) I/O configuration for pin PIO0_10. This is the
- pin configuration for the true open-drain pin. */
- __IO uint32_t PIO0_16; /*!< (@ 0x40044024) I/O configuration for pin PIO0_16 */
- __IO uint32_t PIO0_15; /*!< (@ 0x40044028) I/O configuration for pin PIO0_15 */
- __IO uint32_t PIO0_1; /*!< (@ 0x4004402C) I/O configuration for pin PIO0_17 */
- __I uint32_t RESERVED0;
- __IO uint32_t PIO0_9; /*!< (@ 0x40044034) I/O configuration for pin PIO0_9/XTALOUT */
- __IO uint32_t PIO0_8; /*!< (@ 0x40044038) I/O configuration for pin PIO0_8/XTALIN */
- __IO uint32_t PIO0_7; /*!< (@ 0x4004403C) I/O configuration for pin PIO0_7 */
- __IO uint32_t PIO0_6; /*!< (@ 0x40044040) I/O configuration for pin PIO0_6/VDDCMP */
- __IO uint32_t PIO0_0; /*!< (@ 0x40044044) I/O configuration for pin PIO0_0/ACMP_I0 */
- __IO uint32_t PIO0_14; /*!< (@ 0x40044048) I/O configuration for pin PIO0_14 */
- __I uint32_t RESERVED1;
- __IO uint32_t PIO0_28; /*!< (@ 0x40044050) I/O configuration for pin PIO0_28 */
- __IO uint32_t PIO0_27; /*!< (@ 0x40044054) I/O configuration for pin PIO0_27 */
- __IO uint32_t PIO0_26; /*!< (@ 0x40044058) I/O configuration for pin PIO0_26 */
- __IO uint32_t PIO0_25; /*!< (@ 0x4004405C) I/O configuration for pin PIO0_25 */
- __IO uint32_t PIO0_24; /*!< (@ 0x40044060) I/O configuration for pin PIO0_24 */
- __IO uint32_t PIO0_23; /*!< (@ 0x40044064) I/O configuration for pin PIO0_23/ADC_3 */
- __IO uint32_t PIO0_22; /*!< (@ 0x40044068) I/O configuration for pin PIO0_22/ADC_4 */
- __IO uint32_t PIO0_21; /*!< (@ 0x4004406C) I/O configuration for pin PIO0_21/ACMP_I4/ADC_5 */
- __IO uint32_t PIO0_20; /*!< (@ 0x40044070) I/O configuration for pin PIO0_20/ADC_6 */
- __IO uint32_t PIO0_19; /*!< (@ 0x40044074) I/O configuration for pin PIO0_19/ADC_7 */
- __IO uint32_t PIO0_18; /*!< (@ 0x40044078) I/O configuration for pin PIO0_18/ADC_8 */
-} LPC_IOCON_Type;
-
-
-/* ================================================================================ */
-/* ================ SYSCON ================ */
-/* ================================================================================ */
-
-
-/**
- * @brief System configuration (SYSCON) (SYSCON)
- */
-
-typedef struct { /*!< (@ 0x40048000) SYSCON Structure */
- __IO uint32_t SYSMEMREMAP; /*!< (@ 0x40048000) System memory remap */
- __IO uint32_t PRESETCTRL; /*!< (@ 0x40048004) Peripheral reset control */
- __IO uint32_t SYSPLLCTRL; /*!< (@ 0x40048008) System PLL control */
- __I uint32_t SYSPLLSTAT; /*!< (@ 0x4004800C) System PLL status */
- __I uint32_t RESERVED0[4];
- __IO uint32_t SYSOSCCTRL; /*!< (@ 0x40048020) System oscillator control */
- __IO uint32_t WDTOSCCTRL; /*!< (@ 0x40048024) Watchdog oscillator control */
- __IO uint32_t IRCCTRL; /*!< (@ 0x40048028) IRC control */
- __I uint32_t RESERVED1;
- __IO uint32_t SYSRSTSTAT; /*!< (@ 0x40048030) System reset status register */
- __I uint32_t RESERVED2[3];
- __IO uint32_t SYSPLLCLKSEL; /*!< (@ 0x40048040) System PLL clock source select */
- __IO uint32_t SYSPLLCLKUEN; /*!< (@ 0x40048044) System PLL clock source update enable */
- __I uint32_t RESERVED3[10];
- __IO uint32_t MAINCLKSEL; /*!< (@ 0x40048070) Main clock source select */
- __IO uint32_t MAINCLKUEN; /*!< (@ 0x40048074) Main clock source update enable */
- __IO uint32_t SYSAHBCLKDIV; /*!< (@ 0x40048078) System clock divider */
- __I uint32_t RESERVED4;
- __IO uint32_t SYSAHBCLKCTRL; /*!< (@ 0x40048080) System clock control */
- __I uint32_t RESERVED5[4];
- __IO uint32_t UARTCLKDIV; /*!< (@ 0x40048094) USART clock divider */
- __I uint32_t RESERVED6[18];
- __IO uint32_t CLKOUTSEL; /*!< (@ 0x400480E0) CLKOUT clock source select */
- __IO uint32_t CLKOUTUEN; /*!< (@ 0x400480E4) CLKOUT clock source update enable */
- __IO uint32_t CLKOUTDIV; /*!< (@ 0x400480E8) CLKOUT clock divider */
- __I uint32_t RESERVED7;
- __IO uint32_t UARTFRGDIV; /*!< (@ 0x400480F0) USART1 to USART4 common fractional generator
- divider value */
- __IO uint32_t UARTFRGMULT; /*!< (@ 0x400480F4) USART1 to USART4 common fractional generator
- multiplier value */
- __I uint32_t RESERVED8;
- __IO uint32_t EXTTRACECMD; /*!< (@ 0x400480FC) External trace buffer command register */
- __I uint32_t PIOPORCAP0; /*!< (@ 0x40048100) POR captured PIO status 0 */
- __I uint32_t RESERVED9[12];
- __IO uint32_t IOCONCLKDIV6; /*!< (@ 0x40048134) Peripheral clock 6 to the IOCON block for programmable
- glitch filter */
- __I uint32_t RESERVED10[6];
- __IO uint32_t BODCTRL; /*!< (@ 0x40048150) Brown-Out Detect */
- __IO uint32_t SYSTCKCAL; /*!< (@ 0x40048154) System tick counter calibration */
- __I uint32_t RESERVED11[6];
- __IO uint32_t IRQLATENCY; /*!< (@ 0x40048170) IQR delay. Allows trade-off between interrupt
- latency and determinism. */
- __IO uint32_t NMISRC; /*!< (@ 0x40048174) NMI Source Control */
- union {
- __IO uint32_t PINTSEL[8];
- struct {
- __IO uint32_t PINTSEL0; /*!< (@ 0x40048178) GPIO Pin Interrupt Select register 0 */
- __IO uint32_t PINTSEL1; /*!< (@ 0x4004817C) GPIO Pin Interrupt Select register 0 */
- __IO uint32_t PINTSEL2; /*!< (@ 0x40048180) GPIO Pin Interrupt Select register 0 */
- __IO uint32_t PINTSEL3; /*!< (@ 0x40048184) GPIO Pin Interrupt Select register 0 */
- __IO uint32_t PINTSEL4; /*!< (@ 0x40048188) GPIO Pin Interrupt Select register 0 */
- __IO uint32_t PINTSEL5; /*!< (@ 0x4004818C) GPIO Pin Interrupt Select register 0 */
- __IO uint32_t PINTSEL6; /*!< (@ 0x40048190) GPIO Pin Interrupt Select register 0 */
- __IO uint32_t PINTSEL7; /*!< (@ 0x40048194) GPIO Pin Interrupt Select register 0 */
- };
- };
- __I uint32_t RESERVED12[27];
- __IO uint32_t STARTERP0; /*!< (@ 0x40048204) Start logic 0 pin wake-up enable register */
- __I uint32_t RESERVED13[3];
- __IO uint32_t STARTERP1; /*!< (@ 0x40048214) Start logic 1 interrupt wake-up enable register */
- __I uint32_t RESERVED14[6];
- __IO uint32_t PDSLEEPCFG; /*!< (@ 0x40048230) Power-down states in deep-sleep mode */
- __IO uint32_t PDAWAKECFG; /*!< (@ 0x40048234) Power-down states for wake-up from deep-sleep */
- __IO uint32_t PDRUNCFG; /*!< (@ 0x40048238) Power configuration register */
- __I uint32_t RESERVED15[111];
- __I uint32_t DEVICE_ID; /*!< (@ 0x400483F8) Device ID */
-} LPC_SYSCON_Type;
-
-
-/* ================================================================================ */
-/* ================ I2C0 ================ */
-/* ================================================================================ */
-
-
-/**
- * @brief I2C0-bus interface (I2C0)
- */
-
-typedef struct { /*!< (@ 0x40050000) I2C0 Structure */
- __IO uint32_t CFG; /*!< (@ 0x40050000) Configuration for shared functions. */
- __IO uint32_t STAT; /*!< (@ 0x40050004) Status register for Master, Slave, and Monitor
- functions. */
- __IO uint32_t INTENSET; /*!< (@ 0x40050008) Interrupt Enable Set and read register. */
- __O uint32_t INTENCLR; /*!< (@ 0x4005000C) Interrupt Enable Clear register. */
- __IO uint32_t TIMEOUT; /*!< (@ 0x40050010) Time-out value register. */
- __IO uint32_t CLKDIV; /*!< (@ 0x40050014) Clock pre-divider for the entire I2C block. This
- determines what time increments are used for the MSTTIME and
- SLVTIME registers. */
- __I uint32_t INTSTAT; /*!< (@ 0x40050018) Interrupt Status register for Master, Slave,
- and Monitor functions. */
- __I uint32_t RESERVED0;
- __IO uint32_t MSTCTL; /*!< (@ 0x40050020) Master control register. */
- __IO uint32_t MSTTIME; /*!< (@ 0x40050024) Master timing configuration. */
- __IO uint32_t MSTDAT; /*!< (@ 0x40050028) Combined Master receiver and transmitter data
- register. */
- __I uint32_t RESERVED1[5];
- __IO uint32_t SLVCTL; /*!< (@ 0x40050040) Slave control register. */
- __IO uint32_t SLVDAT; /*!< (@ 0x40050044) Combined Slave receiver and transmitter data
- register. */
- union {
- __IO uint32_t SLVADR[4];
- struct {
- __IO uint32_t SLVADR0; /*!< (@ 0x40050048) Slave address 0. */
- __IO uint32_t SLVADR1; /*!< (@ 0x4005004C) Slave address 0. */
- __IO uint32_t SLVADR2; /*!< (@ 0x40050050) Slave address 0. */
- __IO uint32_t SLVADR3; /*!< (@ 0x40050054) Slave address 0. */
- };
- };
- __IO uint32_t SLVQUAL0; /*!< (@ 0x40050058) Slave Qualification for address 0. */
- __I uint32_t RESERVED2[9];
- __I uint32_t MONRXDAT; /*!< (@ 0x40050080) Monitor receiver data register. */
-} LPC_I2C0_Type;
-
-
-/* ================================================================================ */
-/* ================ SPI0 ================ */
-/* ================================================================================ */
-
-
-/**
- * @brief SPI0 (SPI0)
- */
-
-typedef struct { /*!< (@ 0x40058000) SPI0 Structure */
- __IO uint32_t CFG; /*!< (@ 0x40058000) SPI Configuration register */
- __IO uint32_t DLY; /*!< (@ 0x40058004) SPI Delay register */
- __IO uint32_t STAT; /*!< (@ 0x40058008) SPI Status. Some status flags can be cleared
- by writing a 1 to that bit position */
- __IO uint32_t INTENSET; /*!< (@ 0x4005800C) SPI Interrupt Enable read and Set. A complete
- value may be read from this register. Writing a 1 to any implemented
- bit position causes that bit to be set. */
- __O uint32_t INTENCLR; /*!< (@ 0x40058010) SPI Interrupt Enable Clear. Writing a 1 to any
- implemented bit position causes the corresponding bit in INTENSET
- to be cleared. */
- __I uint32_t RXDAT; /*!< (@ 0x40058014) SPI Receive Data */
- __IO uint32_t TXDATCTL; /*!< (@ 0x40058018) SPI Transmit Data with Control */
- __IO uint32_t TXDAT; /*!< (@ 0x4005801C) SPI Transmit Data */
- __IO uint32_t TXCTL; /*!< (@ 0x40058020) SPI Transmit Control */
- __IO uint32_t DIV; /*!< (@ 0x40058024) SPI clock Divider */
- __I uint32_t INTSTAT; /*!< (@ 0x40058028) SPI Interrupt Status */
-} LPC_SPI0_Type;
-
-
-/* ================================================================================ */
-/* ================ USART0 ================ */
-/* ================================================================================ */
-
-
-/**
- * @brief USART0 (USART0)
- */
-
-typedef struct { /*!< (@ 0x40064000) USART0 Structure */
- __IO uint32_t CFG; /*!< (@ 0x40064000) USART Configuration register. Basic USART configuration
- settings that typically are not changed during operation. */
- __IO uint32_t CTL; /*!< (@ 0x40064004) USART Control register. USART control settings
- that are more likely to change during operation. */
- __IO uint32_t STAT; /*!< (@ 0x40064008) USART Status register. The complete status value
- can be read here. Writing ones clears some bits in the register.
- Some bits can be cleared by writing a 1 to them. */
- __IO uint32_t INTENSET; /*!< (@ 0x4006400C) Interrupt Enable read and Set register. Contains
- an individual interrupt enable bit for each potential USART
- interrupt. A complete value may be read from this register.
- Writing a 1 to any implemented bit position causes that bit
- to be set. */
- __O uint32_t INTENCLR; /*!< (@ 0x40064010) Interrupt Enable Clear register. Allows clearing
- any combination of bits in the INTENSET register. Writing a
- 1 to any implemented bit position causes the corresponding bit
- to be cleared. */
- __I uint32_t RXDAT; /*!< (@ 0x40064014) Receiver Data register. Contains the last character
- received. */
- __I uint32_t RXDATSTAT; /*!< (@ 0x40064018) Receiver Data with Status register. Combines
- the last character received with the current USART receive status.
- Allows DMA or software to recover incoming data and status together. */
- __IO uint32_t TXDAT; /*!< (@ 0x4006401C) Transmit Data register. Data to be transmitted
- is written here. */
- __IO uint32_t BRG; /*!< (@ 0x40064020) Baud Rate Generator register. 16-bit integer
- baud rate divisor value. */
- __I uint32_t INTSTAT; /*!< (@ 0x40064024) Interrupt status register. Reflects interrupts
- that are currently enabled. */
- __IO uint32_t OSR; /*!< (@ 0x40064028) Oversample selection register for asynchronous
- communication. */
- __IO uint32_t ADDR; /*!< (@ 0x4006402C) Address register for automatic address matching. */
-} LPC_USART0_Type;
-
-
-/* ================================================================================ */
-/* ================ CRC ================ */
-/* ================================================================================ */
-
-
-/**
- * @brief Cyclic Redundancy Check (CRC) engine (CRC)
- */
-
-typedef struct { /*!< (@ 0x50000000) CRC Structure */
- __IO uint32_t MODE; /*!< (@ 0x50000000) CRC mode register */
- __IO uint32_t SEED; /*!< (@ 0x50000004) CRC seed register */
-
- union {
- __O uint32_t WR_DATA; /*!< (@ 0x50000008) CRC data register */
- __I uint32_t SUM; /*!< (@ 0x50000008) CRC checksum register */
- };
-} LPC_CRC_Type;
-
-
-/* ================================================================================ */
-/* ================ SCT ================ */
-/* ================================================================================ */
-
-
-/**
- * @brief State Configurable Timer (SCT) (SCT)
- */
-
-typedef struct { /*!< (@ 0x50004000) SCT Structure */
- __IO uint32_t CONFIG; /*!< (@ 0x50004000) SCT configuration register */
- __IO uint32_t CTRL; /*!< (@ 0x50004004) SCT control register */
- __IO uint32_t LIMIT; /*!< (@ 0x50004008) SCT limit register */
- __IO uint32_t HALT; /*!< (@ 0x5000400C) SCT halt condition register */
- __IO uint32_t STOP; /*!< (@ 0x50004010) SCT stop condition register */
- __IO uint32_t START; /*!< (@ 0x50004014) SCT start condition register */
- __I uint32_t RESERVED0[10];
- __IO uint32_t COUNT; /*!< (@ 0x50004040) SCT counter register */
- __IO uint32_t STATE; /*!< (@ 0x50004044) SCT state register */
- __I uint32_t INPUT; /*!< (@ 0x50004048) SCT input register */
- __IO uint32_t REGMODE; /*!< (@ 0x5000404C) SCT match/capture registers mode register */
- __IO uint32_t OUTPUT; /*!< (@ 0x50004050) SCT output register */
- __IO uint32_t OUTPUTDIRCTRL; /*!< (@ 0x50004054) SCT output counter direction control register */
- __IO uint32_t RES; /*!< (@ 0x50004058) SCT conflict resolution register */
- __IO uint32_t DMAREQ0; /*!< (@ 0x5000405C) SCT DMA request 0 register */
- __IO uint32_t DMAREQ1; /*!< (@ 0x50004060) SCT DMA request 1 register */
- __I uint32_t RESERVED1[35];
- __IO uint32_t EVEN; /*!< (@ 0x500040F0) SCT event enable register */
- __IO uint32_t EVFLAG; /*!< (@ 0x500040F4) SCT event flag register */
- __IO uint32_t CONEN; /*!< (@ 0x500040F8) SCT conflict enable register */
- __IO uint32_t CONFLAG; /*!< (@ 0x500040FC) SCT conflict flag register */
-
-union {
- union {
- __IO uint32_t CAP0; /*!< (@ 0x50004100) SCT capture register of capture channel 0 to
- 7; REGMOD0 to REGMODE7 = 1 */
- __IO uint32_t MATCH0; /*!< (@ 0x50004100) SCT match value register of match channels 0
- to 7; REGMOD0 to REGMODE7 = 0 */
- };
-
- union {
- __IO uint32_t CAP1; /*!< (@ 0x50004104) SCT capture register of capture channel 0 to
- 7; REGMOD0 to REGMODE7 = 1 */
- __IO uint32_t MATCH1; /*!< (@ 0x50004104) SCT match value register of match channels 0
- to 7; REGMOD0 to REGMODE7 = 0 */
- };
-
- union {
- __IO uint32_t CAP2; /*!< (@ 0x50004108) SCT capture register of capture channel 0 to
- 7; REGMOD0 to REGMODE7 = 1 */
- __IO uint32_t MATCH2; /*!< (@ 0x50004108) SCT match value register of match channels 0
- to 7; REGMOD0 to REGMODE7 = 0 */
- };
-
- union {
- __IO uint32_t MATCH3; /*!< (@ 0x5000410C) SCT match value register of match channels 0
- to 7; REGMOD0 to REGMODE7 = 0 */
- __IO uint32_t CAP3; /*!< (@ 0x5000410C) SCT capture register of capture channel 0 to
- 7; REGMOD0 to REGMODE7 = 1 */
- };
-
- union {
- __IO uint32_t CAP4; /*!< (@ 0x50004110) SCT capture register of capture channel 0 to
- 7; REGMOD0 to REGMODE7 = 1 */
- __IO uint32_t MATCH4; /*!< (@ 0x50004110) SCT match value register of match channels 0
- to 7; REGMOD0 to REGMODE7 = 0 */
- };
-
- union {
- __IO uint32_t MATCH5; /*!< (@ 0x50004114) SCT match value register of match channels 0
- to 7; REGMOD0 to REGMODE7 = 0 */
- __IO uint32_t CAP5; /*!< (@ 0x50004114) SCT capture register of capture channel 0 to
- 7; REGMOD0 to REGMODE7 = 1 */
- };
-
- union {
- __IO uint32_t CAP6; /*!< (@ 0x50004118) SCT capture register of capture channel 0 to
- 7; REGMOD0 to REGMODE7 = 1 */
- __IO uint32_t MATCH6; /*!< (@ 0x50004118) SCT match value register of match channels 0
- to 7; REGMOD0 to REGMODE7 = 0 */
- };
-
- union {
- __IO uint32_t CAP7; /*!< (@ 0x5000411C) SCT capture register of capture channel 0 to
- 7; REGMOD0 to REGMODE7 = 1 */
- __IO uint32_t MATCH7; /*!< (@ 0x5000411C) SCT match value register of match channels 0
- to 7; REGMOD0 to REGMODE7 = 0 */
- };
- __IO uint32_t CAP[8];
- __IO uint32_t MATCH[8];
-};
- __I uint32_t RESERVED2[56];
-
- union {
- struct {
- union {
- __IO uint32_t CAPCTRL0; /*!< (@ 0x50004200) SCT capture control register 0 to 7; REGMOD0
- = 1 to REGMODE7 = 1 */
- __IO uint32_t MATCHREL0; /*!< (@ 0x50004200) SCT match reload value register 0 to 7; REGMOD0
- = 0 to REGMODE7 = 0 */
- };
-
- union {
- __IO uint32_t CAPCTRL1; /*!< (@ 0x50004204) SCT capture control register 0 to 7; REGMOD0
- = 1 to REGMODE7 = 1 */
- __IO uint32_t MATCHREL1; /*!< (@ 0x50004204) SCT match reload value register 0 to 7; REGMOD0
- = 0 to REGMODE7 = 0 */
- };
-
- union {
- __IO uint32_t CAPCTRL2; /*!< (@ 0x50004208) SCT capture control register 0 to 7; REGMOD0
- = 1 to REGMODE7 = 1 */
- __IO uint32_t MATCHREL2; /*!< (@ 0x50004208) SCT match reload value register 0 to 7; REGMOD0
- = 0 to REGMODE7 = 0 */
- };
-
- union {
- __IO uint32_t MATCHREL3; /*!< (@ 0x5000420C) SCT match reload value register 0 to 7; REGMOD0
- = 0 to REGMODE7 = 0 */
- __IO uint32_t CAPCTRL3; /*!< (@ 0x5000420C) SCT capture control register 0 to 7; REGMOD0
- = 1 to REGMODE7 = 1 */
- };
-
- union {
- __IO uint32_t CAPCTRL4; /*!< (@ 0x50004210) SCT capture control register 0 to 7; REGMOD0
- = 1 to REGMODE7 = 1 */
- __IO uint32_t MATCHREL4; /*!< (@ 0x50004210) SCT match reload value register 0 to 7; REGMOD0
- = 0 to REGMODE7 = 0 */
- };
-
- union {
- __IO uint32_t CAPCTRL5; /*!< (@ 0x50004214) SCT capture control register 0 to 7; REGMOD0
- = 1 to REGMODE7 = 1 */
- __IO uint32_t MATCHREL5; /*!< (@ 0x50004214) SCT match reload value register 0 to 7; REGMOD0
- = 0 to REGMODE7 = 0 */
- };
-
- union {
- __IO uint32_t CAPCTRL6; /*!< (@ 0x50004218) SCT capture control register 0 to 7; REGMOD0
- = 1 to REGMODE7 = 1 */
- __IO uint32_t MATCHREL6; /*!< (@ 0x50004218) SCT match reload value register 0 to 7; REGMOD0
- = 0 to REGMODE7 = 0 */
- };
-
- union {
- __IO uint32_t CAPCTRL7; /*!< (@ 0x5000421C) SCT capture control register 0 to 7; REGMOD0
- = 1 to REGMODE7 = 1 */
- __IO uint32_t MATCHREL7; /*!< (@ 0x5000421C) SCT match reload value register 0 to 7; REGMOD0
- = 0 to REGMODE7 = 0 */
- };
- };
- __IO uint32_t MATCHREL[8];
- };
- __I uint32_t RESERVED3[56];
-
- union {
- struct {
- __IO uint32_t EV0_STATE; /*!< (@ 0x50004300) SCT event state register 0 */
- __IO uint32_t EV0_CTRL; /*!< (@ 0x50004304) SCT event control register 0 */
- __IO uint32_t EV1_STATE; /*!< (@ 0x50004308) SCT event state register 0 */
- __IO uint32_t EV1_CTRL; /*!< (@ 0x5000430C) SCT event control register 0 */
- __IO uint32_t EV2_STATE; /*!< (@ 0x50004310) SCT event state register 0 */
- __IO uint32_t EV2_CTRL; /*!< (@ 0x50004314) SCT event control register 0 */
- __IO uint32_t EV3_STATE; /*!< (@ 0x50004318) SCT event state register 0 */
- __IO uint32_t EV3_CTRL; /*!< (@ 0x5000431C) SCT event control register 0 */
- __IO uint32_t EV4_STATE; /*!< (@ 0x50004320) SCT event state register 0 */
- __IO uint32_t EV4_CTRL; /*!< (@ 0x50004324) SCT event control register 0 */
- __IO uint32_t EV5_STATE; /*!< (@ 0x50004328) SCT event state register 0 */
- __IO uint32_t EV5_CTRL; /*!< (@ 0x5000432C) SCT event control register 0 */
- __IO uint32_t EV6_STATE; /*!< (@ 0x50004330) SCT event state register 0 */
- __IO uint32_t EV6_CTRL; /*!< (@ 0x50004334) SCT event control register 0 */
- __IO uint32_t EV7_STATE; /*!< (@ 0x50004338) SCT event state register 0 */
- __IO uint32_t EV7_CTRL; /*!< (@ 0x5000433C) SCT event control register 0 */
- };
- __IO struct {
- uint32_t STATE;
- uint32_t CTRL;
- } EVENT[8];
- };
-
- __I uint32_t RESERVED4[112];
-
- union {
- struct {
- __IO uint32_t OUT0_SET; /*!< (@ 0x50004500) SCT output 0 set register */
- __IO uint32_t OUT0_CLR; /*!< (@ 0x50004504) SCT output 0 clear register */
- __IO uint32_t OUT1_SET; /*!< (@ 0x50004508) SCT output 0 set register */
- __IO uint32_t OUT1_CLR; /*!< (@ 0x5000450C) SCT output 0 clear register */
- __IO uint32_t OUT2_SET; /*!< (@ 0x50004510) SCT output 0 set register */
- __IO uint32_t OUT2_CLR; /*!< (@ 0x50004514) SCT output 0 clear register */
- __IO uint32_t OUT3_SET; /*!< (@ 0x50004518) SCT output 0 set register */
- __IO uint32_t OUT3_CLR; /*!< (@ 0x5000451C) SCT output 0 clear register */
- __IO uint32_t OUT4_SET; /*!< (@ 0x50004520) SCT output 0 set register */
- __IO uint32_t OUT4_CLR; /*!< (@ 0x50004524) SCT output 0 clear register */
- __IO uint32_t OUT5_SET; /*!< (@ 0x50004528) SCT output 0 set register */
- __IO uint32_t OUT5_CLR; /*!< (@ 0x5000452C) SCT output 0 clear register */
- };
- __IO struct {
- uint32_t SET;
- uint32_t CLR;
- } OUT[6];
-};
-
-} LPC_SCT_Type;
-
-
-/* ================================================================================ */
-/* ================ DMA ================ */
-/* ================================================================================ */
-
-
-/**
- * @brief DMA controller (DMA)
- */
-
-typedef struct { /*!< (@ 0x50008000) DMA Structure */
- __IO uint32_t CTRL; /*!< (@ 0x50008000) DMA control. */
- __I uint32_t INTSTAT; /*!< (@ 0x50008004) Interrupt status. */
- __IO uint32_t SRAMBASE; /*!< (@ 0x50008008) SRAM address of the channel configuration table. */
- __I uint32_t RESERVED0[5];
- __IO uint32_t ENABLESET0; /*!< (@ 0x50008020) Channel Enable read and Set for all DMA channels. */
- __I uint32_t RESERVED1;
- __O uint32_t ENABLECLR0; /*!< (@ 0x50008028) Channel Enable Clear for all DMA channels. */
- __I uint32_t RESERVED2;
- __I uint32_t ACTIVE0; /*!< (@ 0x50008030) Channel Active status for all DMA channels. */
- __I uint32_t RESERVED3;
- __I uint32_t BUSY0; /*!< (@ 0x50008038) Channel Busy status for all DMA channels. */
- __I uint32_t RESERVED4;
- __IO uint32_t ERRINT0; /*!< (@ 0x50008040) Error Interrupt status for all DMA channels. */
- __I uint32_t RESERVED5;
- __IO uint32_t INTENSET0; /*!< (@ 0x50008048) Interrupt Enable read and Set for all DMA channels. */
- __I uint32_t RESERVED6;
- __O uint32_t INTENCLR0; /*!< (@ 0x50008050) Interrupt Enable Clear for all DMA channels. */
- __I uint32_t RESERVED7;
- __IO uint32_t INTA0; /*!< (@ 0x50008058) Interrupt A status for all DMA channels. */
- __I uint32_t RESERVED8;
- __IO uint32_t INTB0; /*!< (@ 0x50008060) Interrupt B status for all DMA channels. */
- __I uint32_t RESERVED9;
- __O uint32_t SETVALID0; /*!< (@ 0x50008068) Set ValidPending control bits for all DMA channels. */
- __I uint32_t RESERVED10;
- __O uint32_t SETTRIG0; /*!< (@ 0x50008070) Set Trigger control bits for all DMA channels. */
- __I uint32_t RESERVED11;
- __O uint32_t ABORT0; /*!< (@ 0x50008078) Channel Abort control for all DMA channels. */
- __I uint32_t RESERVED12[225];
- __IO uint32_t CFG0; /*!< (@ 0x50008400) Configuration register for DMA channel 0. */
- __I uint32_t CTLSTAT0; /*!< (@ 0x50008404) Control and status register for DMA channel 0. */
- __IO uint32_t XFERCFG0; /*!< (@ 0x50008408) Transfer configuration register for DMA channel
- 0. */
- __I uint32_t RESERVED13;
- __IO uint32_t CFG1; /*!< (@ 0x50008410) Configuration register for DMA channel 0. */
- __I uint32_t CTLSTAT1; /*!< (@ 0x50008414) Control and status register for DMA channel 0. */
- __IO uint32_t XFERCFG1; /*!< (@ 0x50008418) Transfer configuration register for DMA channel
- 0. */
- __I uint32_t RESERVED14;
- __IO uint32_t CFG2; /*!< (@ 0x50008420) Configuration register for DMA channel 0. */
- __I uint32_t CTLSTAT2; /*!< (@ 0x50008424) Control and status register for DMA channel 0. */
- __IO uint32_t XFERCFG2; /*!< (@ 0x50008428) Transfer configuration register for DMA channel
- 0. */
- __I uint32_t RESERVED15;
- __IO uint32_t CFG3; /*!< (@ 0x50008430) Configuration register for DMA channel 0. */
- __I uint32_t CTLSTAT3; /*!< (@ 0x50008434) Control and status register for DMA channel 0. */
- __IO uint32_t XFERCFG3; /*!< (@ 0x50008438) Transfer configuration register for DMA channel
- 0. */
- __I uint32_t RESERVED16;
- __IO uint32_t CFG4; /*!< (@ 0x50008440) Configuration register for DMA channel 0. */
- __I uint32_t CTLSTAT4; /*!< (@ 0x50008444) Control and status register for DMA channel 0. */
- __IO uint32_t XFERCFG4; /*!< (@ 0x50008448) Transfer configuration register for DMA channel
- 0. */
- __I uint32_t RESERVED17;
- __IO uint32_t CFG5; /*!< (@ 0x50008450) Configuration register for DMA channel 0. */
- __I uint32_t CTLSTAT5; /*!< (@ 0x50008454) Control and status register for DMA channel 0. */
- __IO uint32_t XFERCFG5; /*!< (@ 0x50008458) Transfer configuration register for DMA channel
- 0. */
- __I uint32_t RESERVED18;
- __IO uint32_t CFG6; /*!< (@ 0x50008460) Configuration register for DMA channel 0. */
- __I uint32_t CTLSTAT6; /*!< (@ 0x50008464) Control and status register for DMA channel 0. */
- __IO uint32_t XFERCFG6; /*!< (@ 0x50008468) Transfer configuration register for DMA channel
- 0. */
- __I uint32_t RESERVED19;
- __IO uint32_t CFG7; /*!< (@ 0x50008470) Configuration register for DMA channel 0. */
- __I uint32_t CTLSTAT7; /*!< (@ 0x50008474) Control and status register for DMA channel 0. */
- __IO uint32_t XFERCFG7; /*!< (@ 0x50008478) Transfer configuration register for DMA channel
- 0. */
- __I uint32_t RESERVED20;
- __IO uint32_t CFG8; /*!< (@ 0x50008480) Configuration register for DMA channel 0. */
- __I uint32_t CTLSTAT8; /*!< (@ 0x50008484) Control and status register for DMA channel 0. */
- __IO uint32_t XFERCFG8; /*!< (@ 0x50008488) Transfer configuration register for DMA channel
- 0. */
- __I uint32_t RESERVED21;
- __IO uint32_t CFG9; /*!< (@ 0x50008490) Configuration register for DMA channel 0. */
- __I uint32_t CTLSTAT9; /*!< (@ 0x50008494) Control and status register for DMA channel 0. */
- __IO uint32_t XFERCFG9; /*!< (@ 0x50008498) Transfer configuration register for DMA channel
- 0. */
- __I uint32_t RESERVED22;
- __IO uint32_t CFG10; /*!< (@ 0x500084A0) Configuration register for DMA channel 0. */
- __I uint32_t CTLSTAT10; /*!< (@ 0x500084A4) Control and status register for DMA channel 0. */
- __IO uint32_t XFERCFG10; /*!< (@ 0x500084A8) Transfer configuration register for DMA channel
- 0. */
- __I uint32_t RESERVED23;
- __IO uint32_t CFG11; /*!< (@ 0x500084B0) Configuration register for DMA channel 0. */
- __I uint32_t CTLSTAT11; /*!< (@ 0x500084B4) Control and status register for DMA channel 0. */
- __IO uint32_t XFERCFG11; /*!< (@ 0x500084B8) Transfer configuration register for DMA channel
- 0. */
- __I uint32_t RESERVED24;
- __IO uint32_t CFG12; /*!< (@ 0x500084C0) Configuration register for DMA channel 0. */
- __I uint32_t CTLSTAT12; /*!< (@ 0x500084C4) Control and status register for DMA channel 0. */
- __IO uint32_t XFERCFG12; /*!< (@ 0x500084C8) Transfer configuration register for DMA channel
- 0. */
- __I uint32_t RESERVED25;
- __IO uint32_t CFG13; /*!< (@ 0x500084D0) Configuration register for DMA channel 0. */
- __I uint32_t CTLSTAT13; /*!< (@ 0x500084D4) Control and status register for DMA channel 0. */
- __IO uint32_t XFERCFG13; /*!< (@ 0x500084D8) Transfer configuration register for DMA channel
- 0. */
- __I uint32_t RESERVED26;
- __IO uint32_t CFG14; /*!< (@ 0x500084E0) Configuration register for DMA channel 0. */
- __I uint32_t CTLSTAT14; /*!< (@ 0x500084E4) Control and status register for DMA channel 0. */
- __IO uint32_t XFERCFG14; /*!< (@ 0x500084E8) Transfer configuration register for DMA channel
- 0. */
- __I uint32_t RESERVED27;
- __IO uint32_t CFG15; /*!< (@ 0x500084F0) Configuration register for DMA channel 0. */
- __I uint32_t CTLSTAT15; /*!< (@ 0x500084F4) Control and status register for DMA channel 0. */
- __IO uint32_t XFERCFG15; /*!< (@ 0x500084F8) Transfer configuration register for DMA channel
- 0. */
- __I uint32_t RESERVED28;
- __IO uint32_t CFG16; /*!< (@ 0x50008500) Configuration register for DMA channel 0. */
- __I uint32_t CTLSTAT16; /*!< (@ 0x50008504) Control and status register for DMA channel 0. */
- __IO uint32_t XFERCFG16; /*!< (@ 0x50008508) Transfer configuration register for DMA channel
- 0. */
- __I uint32_t RESERVED29;
- __IO uint32_t CFG17; /*!< (@ 0x50008510) Configuration register for DMA channel 0. */
- __I uint32_t CTLSTAT17; /*!< (@ 0x50008514) Control and status register for DMA channel 0. */
- __IO uint32_t XFERCFG17; /*!< (@ 0x50008518) Transfer configuration register for DMA channel
- 0. */
-} LPC_DMA_Type;
-
-
-/* ================================================================================ */
-/* ================ GPIO_PORT ================ */
-/* ================================================================================ */
-
-
-/**
- * @brief General Purpose I/O port (GPIO) (GPIO_PORT)
- */
-
-typedef struct { /*!< (@ 0xA0000000) GPIO_PORT Structure */
- __IO uint8_t B0; /*!< (@ 0xA0000000) Byte pin registers port 0; pins PIO0_0 to PIO0_28 */
- __IO uint8_t B1; /*!< (@ 0xA0000001) Byte pin registers port 0; pins PIO0_0 to PIO0_28 */
- __IO uint8_t B2; /*!< (@ 0xA0000002) Byte pin registers port 0; pins PIO0_0 to PIO0_28 */
- __IO uint8_t B3; /*!< (@ 0xA0000003) Byte pin registers port 0; pins PIO0_0 to PIO0_28 */
- __IO uint8_t B4; /*!< (@ 0xA0000004) Byte pin registers port 0; pins PIO0_0 to PIO0_28 */
- __IO uint8_t B5; /*!< (@ 0xA0000005) Byte pin registers port 0; pins PIO0_0 to PIO0_28 */
- __IO uint8_t B6; /*!< (@ 0xA0000006) Byte pin registers port 0; pins PIO0_0 to PIO0_28 */
- __IO uint8_t B7; /*!< (@ 0xA0000007) Byte pin registers port 0; pins PIO0_0 to PIO0_28 */
- __IO uint8_t B8; /*!< (@ 0xA0000008) Byte pin registers port 0; pins PIO0_0 to PIO0_28 */
- __IO uint8_t B9; /*!< (@ 0xA0000009) Byte pin registers port 0; pins PIO0_0 to PIO0_28 */
- __IO uint8_t B10; /*!< (@ 0xA000000A) Byte pin registers port 0; pins PIO0_0 to PIO0_28 */
- __IO uint8_t B11; /*!< (@ 0xA000000B) Byte pin registers port 0; pins PIO0_0 to PIO0_28 */
- __IO uint8_t B12; /*!< (@ 0xA000000C) Byte pin registers port 0; pins PIO0_0 to PIO0_28 */
- __IO uint8_t B13; /*!< (@ 0xA000000D) Byte pin registers port 0; pins PIO0_0 to PIO0_28 */
- __IO uint8_t B14; /*!< (@ 0xA000000E) Byte pin registers port 0; pins PIO0_0 to PIO0_28 */
- __IO uint8_t B15; /*!< (@ 0xA000000F) Byte pin registers port 0; pins PIO0_0 to PIO0_28 */
- __IO uint8_t B16; /*!< (@ 0xA0000010) Byte pin registers port 0; pins PIO0_0 to PIO0_28 */
- __IO uint8_t B17; /*!< (@ 0xA0000011) Byte pin registers port 0; pins PIO0_0 to PIO0_28 */
- __IO uint8_t B18; /*!< (@ 0xA0000012) Byte pin registers port 0; pins PIO0_0 to PIO0_28 */
- __IO uint8_t B19; /*!< (@ 0xA0000013) Byte pin registers port 0; pins PIO0_0 to PIO0_28 */
- __IO uint8_t B20; /*!< (@ 0xA0000014) Byte pin registers port 0; pins PIO0_0 to PIO0_28 */
- __IO uint8_t B21; /*!< (@ 0xA0000015) Byte pin registers port 0; pins PIO0_0 to PIO0_28 */
- __IO uint8_t B22; /*!< (@ 0xA0000016) Byte pin registers port 0; pins PIO0_0 to PIO0_28 */
- __IO uint8_t B23; /*!< (@ 0xA0000017) Byte pin registers port 0; pins PIO0_0 to PIO0_28 */
- __IO uint8_t B24; /*!< (@ 0xA0000018) Byte pin registers port 0; pins PIO0_0 to PIO0_28 */
- __IO uint8_t B25; /*!< (@ 0xA0000019) Byte pin registers port 0; pins PIO0_0 to PIO0_28 */
- __IO uint8_t B26; /*!< (@ 0xA000001A) Byte pin registers port 0; pins PIO0_0 to PIO0_28 */
- __IO uint8_t B27; /*!< (@ 0xA000001B) Byte pin registers port 0; pins PIO0_0 to PIO0_28 */
- __IO uint8_t B28; /*!< (@ 0xA000001C) Byte pin registers port 0; pins PIO0_0 to PIO0_28 */
- __I uint8_t RESERVED0[4067];
- __IO uint32_t W0; /*!< (@ 0xA0001000) Word pin registers port 0 */
- __IO uint32_t W1; /*!< (@ 0xA0001004) Word pin registers port 0 */
- __IO uint32_t W2; /*!< (@ 0xA0001008) Word pin registers port 0 */
- __IO uint32_t W3; /*!< (@ 0xA000100C) Word pin registers port 0 */
- __IO uint32_t W4; /*!< (@ 0xA0001010) Word pin registers port 0 */
- __IO uint32_t W5; /*!< (@ 0xA0001014) Word pin registers port 0 */
- __IO uint32_t W6; /*!< (@ 0xA0001018) Word pin registers port 0 */
- __IO uint32_t W7; /*!< (@ 0xA000101C) Word pin registers port 0 */
- __IO uint32_t W8; /*!< (@ 0xA0001020) Word pin registers port 0 */
- __IO uint32_t W9; /*!< (@ 0xA0001024) Word pin registers port 0 */
- __IO uint32_t W10; /*!< (@ 0xA0001028) Word pin registers port 0 */
- __IO uint32_t W11; /*!< (@ 0xA000102C) Word pin registers port 0 */
- __IO uint32_t W12; /*!< (@ 0xA0001030) Word pin registers port 0 */
- __IO uint32_t W13; /*!< (@ 0xA0001034) Word pin registers port 0 */
- __IO uint32_t W14; /*!< (@ 0xA0001038) Word pin registers port 0 */
- __IO uint32_t W15; /*!< (@ 0xA000103C) Word pin registers port 0 */
- __IO uint32_t W16; /*!< (@ 0xA0001040) Word pin registers port 0 */
- __IO uint32_t W17; /*!< (@ 0xA0001044) Word pin registers port 0 */
- __IO uint32_t W18; /*!< (@ 0xA0001048) Word pin registers port 0 */
- __IO uint32_t W19; /*!< (@ 0xA000104C) Word pin registers port 0 */
- __IO uint32_t W20; /*!< (@ 0xA0001050) Word pin registers port 0 */
- __IO uint32_t W21; /*!< (@ 0xA0001054) Word pin registers port 0 */
- __IO uint32_t W22; /*!< (@ 0xA0001058) Word pin registers port 0 */
- __IO uint32_t W23; /*!< (@ 0xA000105C) Word pin registers port 0 */
- __IO uint32_t W24; /*!< (@ 0xA0001060) Word pin registers port 0 */
- __IO uint32_t W25; /*!< (@ 0xA0001064) Word pin registers port 0 */
- __IO uint32_t W26; /*!< (@ 0xA0001068) Word pin registers port 0 */
- __IO uint32_t W27; /*!< (@ 0xA000106C) Word pin registers port 0 */
- __IO uint32_t W28; /*!< (@ 0xA0001070) Word pin registers port 0 */
- __I uint32_t RESERVED1[995];
- __IO uint32_t DIR0; /*!< (@ 0xA0002000) Direction registers port 0 */
- __I uint32_t RESERVED2[31];
- __IO uint32_t MASK0; /*!< (@ 0xA0002080) Mask register port 0 */
- __I uint32_t RESERVED3[31];
- __IO uint32_t PIN0; /*!< (@ 0xA0002100) Port pin register port 0 */
- __I uint32_t RESERVED4[31];
- __IO uint32_t MPIN0; /*!< (@ 0xA0002180) Masked port register port 0 */
- __I uint32_t RESERVED5[31];
- __IO uint32_t SET0; /*!< (@ 0xA0002200) Write: Set register for port 0 Read: output bits
- for port 0 */
- __I uint32_t RESERVED6[31];
- __O uint32_t CLR0; /*!< (@ 0xA0002280) Clear port 0 */
- __I uint32_t RESERVED7[31];
- __O uint32_t NOT0; /*!< (@ 0xA0002300) Toggle port 0 */
- __I uint32_t RESERVED8[31];
- __O uint32_t DIRSET0; /*!< (@ 0xA0002380) Set pin direction bits for port 0. */
- __I uint32_t RESERVED9[31];
- __O uint32_t DIRCLR0; /*!< (@ 0xA0002400) Clear pin direction bits for port 0. */
- __I uint32_t RESERVED10[31];
- __O uint32_t DIRNOT0; /*!< (@ 0xA0002480) Toggle pin direction bits for port 0. */
-} LPC_GPIO_PORT_Type;
-
-
-/* ================================================================================ */
-/* ================ PIN_INT ================ */
-/* ================================================================================ */
-
-
-/**
- * @brief Pin interrupt and pattern match engine (PIN_INT)
- */
-
-typedef struct { /*!< (@ 0xA0004000) PIN_INT Structure */
- __IO uint32_t ISEL; /*!< (@ 0xA0004000) Pin Interrupt Mode register */
- __IO uint32_t IENR; /*!< (@ 0xA0004004) Pin interrupt level or rising edge interrupt
- enable register */
- __O uint32_t SIENR; /*!< (@ 0xA0004008) Pin interrupt level (rising edge) interrupt set
- register */
- __O uint32_t CIENR; /*!< (@ 0xA000400C) Pin interrupt level or rising edge interrupt
- clear register */
- __IO uint32_t IENF; /*!< (@ 0xA0004010) Pin interrupt active level or falling edge interrupt
- enable register */
- __O uint32_t SIENF; /*!< (@ 0xA0004014) Pin interrupt active level or falling edge interrupt
- set register */
- __O uint32_t CIENF; /*!< (@ 0xA0004018) Pin interrupt active level (falling edge) interrupt
- clear register */
- __IO uint32_t RISE; /*!< (@ 0xA000401C) Pin interrupt rising edge register */
- __IO uint32_t FALL; /*!< (@ 0xA0004020) Pin interrupt falling edge register */
- __IO uint32_t IST; /*!< (@ 0xA0004024) Pin interrupt status register */
- __IO uint32_t PMCTRL; /*!< (@ 0xA0004028) GPIO pattern match interrupt control register */
- __IO uint32_t PMSRC; /*!< (@ 0xA000402C) GPIO pattern match interrupt bit-slice source
- register */
- __IO uint32_t PMCFG; /*!< (@ 0xA0004030) GPIO pattern match interrupt bit slice configuration
- register */
-} LPC_PIN_INT_Type;
-
-
-/* -------------------- End of section using anonymous unions ------------------- */
-#if defined(__CC_ARM)
- #pragma pop
-#elif defined(__ICCARM__)
- /* leave anonymous unions enabled */
-#elif defined(__GNUC__)
- /* anonymous unions are enabled by default */
-#elif defined(__TMS470__)
- /* anonymous unions are enabled by default */
-#elif defined(__TASKING__)
- #pragma warning restore
-#else
- #warning Not supported compiler type
-#endif
-
-
-
-
-/* ================================================================================ */
-/* ================ Peripheral memory map ================ */
-/* ================================================================================ */
-
-#define LPC_WWDT_BASE 0x40000000UL
-#define LPC_MRT_BASE 0x40004000UL
-#define LPC_WKT_BASE 0x40008000UL
-#define LPC_SWM_BASE 0x4000C000UL
-#define LPC_ADC_BASE 0x4001C000UL
-#define LPC_PMU_BASE 0x40020000UL
-#define LPC_CMP_BASE 0x40024000UL
-#define LPC_DMATRIGMUX_BASE 0x40028000UL
-#define LPC_INPUTMUX_BASE 0x4002C000UL
-#define LPC_FLASHCTRL_BASE 0x40040000UL
-#define LPC_IOCON_BASE 0x40044000UL
-#define LPC_SYSCON_BASE 0x40048000UL
-#define LPC_I2C0_BASE 0x40050000UL
-#define LPC_I2C1_BASE 0x40054000UL
-#define LPC_SPI0_BASE 0x40058000UL
-#define LPC_SPI1_BASE 0x4005C000UL
-#define LPC_USART0_BASE 0x40064000UL
-#define LPC_USART1_BASE 0x40068000UL
-#define LPC_USART2_BASE 0x4006C000UL
-#define LPC_I2C2_BASE 0x40070000UL
-#define LPC_I2C3_BASE 0x40074000UL
-#define LPC_CRC_BASE 0x50000000UL
-#define LPC_SCT_BASE 0x50004000UL
-#define LPC_DMA_BASE 0x50008000UL
-#define LPC_GPIO_PORT_BASE 0xA0000000UL
-#define LPC_PIN_INT_BASE 0xA0004000UL
-
-
-/* ================================================================================ */
-/* ================ Peripheral declaration ================ */
-/* ================================================================================ */
-
-#define LPC_WWDT ((LPC_WWDT_Type *) LPC_WWDT_BASE)
-#define LPC_MRT ((LPC_MRT_Type *) LPC_MRT_BASE)
-#define LPC_WKT ((LPC_WKT_Type *) LPC_WKT_BASE)
-#define LPC_SWM ((LPC_SWM_Type *) LPC_SWM_BASE)
-#define LPC_ADC ((LPC_ADC_Type *) LPC_ADC_BASE)
-#define LPC_PMU ((LPC_PMU_Type *) LPC_PMU_BASE)
-#define LPC_CMP ((LPC_CMP_Type *) LPC_CMP_BASE)
-#define LPC_DMATRIGMUX ((LPC_DMATRIGMUX_Type *) LPC_DMATRIGMUX_BASE)
-#define LPC_INPUTMUX ((LPC_INPUTMUX_Type *) LPC_INPUTMUX_BASE)
-#define LPC_FLASHCTRL ((LPC_FLASHCTRL_Type *) LPC_FLASHCTRL_BASE)
-#define LPC_IOCON ((LPC_IOCON_Type *) LPC_IOCON_BASE)
-#define LPC_SYSCON ((LPC_SYSCON_Type *) LPC_SYSCON_BASE)
-#define LPC_I2C0 ((LPC_I2C0_Type *) LPC_I2C0_BASE)
-#define LPC_I2C1 ((LPC_I2C0_Type *) LPC_I2C1_BASE)
-#define LPC_SPI0 ((LPC_SPI0_Type *) LPC_SPI0_BASE)
-#define LPC_SPI1 ((LPC_SPI0_Type *) LPC_SPI1_BASE)
-#define LPC_USART0 ((LPC_USART0_Type *) LPC_USART0_BASE)
-#define LPC_USART1 ((LPC_USART0_Type *) LPC_USART1_BASE)
-#define LPC_USART2 ((LPC_USART0_Type *) LPC_USART2_BASE)
-#define LPC_I2C2 ((LPC_I2C0_Type *) LPC_I2C2_BASE)
-#define LPC_I2C3 ((LPC_I2C0_Type *) LPC_I2C3_BASE)
-#define LPC_CRC ((LPC_CRC_Type *) LPC_CRC_BASE)
-#define LPC_SCT ((LPC_SCT_Type *) LPC_SCT_BASE)
-#define LPC_DMA ((LPC_DMA_Type *) LPC_DMA_BASE)
-#define LPC_GPIO_PORT ((LPC_GPIO_PORT_Type *) LPC_GPIO_PORT_BASE)
-#define LPC_PIN_INT ((LPC_PIN_INT_Type *) LPC_PIN_INT_BASE)
-
-
-/** @} */ /* End of group Device_Peripheral_Registers */
-/** @} */ /* End of group LPC82x */
-/** @} */ /* End of group (null) */
-
-#ifdef __cplusplus
-}
-#endif
-
-
-#endif /* LPC82x_H */
-
+
+/****************************************************************************************************//**
+ * @file LPC82x.h
+ *
+ * @brief CMSIS Cortex-M0PLUS Peripheral Access Layer Header File for
+ * LPC82x from .
+ *
+ * @version V0.4
+ * @date 17. June 2014
+ *
+ * @note Generated with SVDConv V2.80
+ * from CMSIS SVD File 'LPC82x.svd' Version 0.4,
+ *******************************************************************************************************/
+
+
+
+/** @addtogroup (null)
+ * @{
+ */
+
+/** @addtogroup LPC82x
+ * @{
+ */
+
+#ifndef LPC82X_H
+#define LPC82X_H
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+
+/* ------------------------- Interrupt Number Definition ------------------------ */
+
+typedef enum {
+/* ----------------- Cortex-M0PLUS Processor Exceptions Numbers ----------------- */
+ Reset_IRQn = -15, /*!< 1 Reset Vector, invoked on Power up and warm reset */
+ NonMaskableInt_IRQn = -14, /*!< 2 Non maskable Interrupt, cannot be stopped or preempted */
+ HardFault_IRQn = -13, /*!< 3 Hard Fault, all classes of Fault */
+ SVCall_IRQn = -5, /*!< 11 System Service Call via SVC instruction */
+ DebugMonitor_IRQn = -4, /*!< 12 Debug Monitor */
+ PendSV_IRQn = -2, /*!< 14 Pendable request for system service */
+ SysTick_IRQn = -1, /*!< 15 System Tick Timer */
+/* ---------------------- LPC82x Specific Interrupt Numbers --------------------- */
+ SPI0_IRQn = 0, /*!< 0 SPI0 */
+ SPI1_IRQn = 1, /*!< 1 SPI1 */
+ UART0_IRQn = 3, /*!< 3 UART0 */
+ UART1_IRQn = 4, /*!< 4 UART1 */
+ UART2_IRQn = 5, /*!< 5 UART2 */
+ I2C1_IRQn = 7, /*!< 7 I2C1 */
+ I2C0_IRQn = 8, /*!< 8 I2C0 */
+ SCT_IRQn = 9, /*!< 9 SCT */
+ MRT_IRQn = 10, /*!< 10 MRT */
+ CMP_IRQn = 11, /*!< 11 CMP */
+ WDT_IRQn = 12, /*!< 12 WDT */
+ BOD_IRQn = 13, /*!< 13 BOD */
+ FLASH_IRQn = 14, /*!< 14 FLASH */
+ WKT_IRQn = 15, /*!< 15 WKT */
+ ADC_SEQA_IRQn = 16, /*!< 16 ADC_SEQA */
+ ADC_SEQB_IRQn = 17, /*!< 17 ADC_SEQB */
+ ADC_THCMP_IRQn = 18, /*!< 18 ADC_THCMP */
+ ADC_OVR_IRQn = 19, /*!< 19 ADC_OVR */
+ DMA_IRQn = 20, /*!< 20 DMA */
+ I2C2_IRQn = 21, /*!< 21 I2C2 */
+ I2C3_IRQn = 22, /*!< 22 I2C3 */
+ PIN_INT0_IRQn = 24, /*!< 24 PIN_INT0 */
+ PIN_INT1_IRQn = 25, /*!< 25 PIN_INT1 */
+ PIN_INT2_IRQn = 26, /*!< 26 PIN_INT2 */
+ PIN_INT3_IRQn = 27, /*!< 27 PIN_INT3 */
+ PIN_INT4_IRQn = 28, /*!< 28 PIN_INT4 */
+ PIN_INT5_IRQn = 29, /*!< 29 PIN_INT5 */
+ PIN_INT6_IRQn = 30, /*!< 30 PIN_INT6 */
+ PIN_INT7_IRQn = 31 /*!< 31 PIN_INT7 */
+} IRQn_Type;
+
+
+/** @addtogroup Configuration_of_CMSIS
+ * @{
+ */
+
+
+/* ================================================================================ */
+/* ================ Processor and Core Peripheral Section ================ */
+/* ================================================================================ */
+
+/* ----------------Configuration of the Cortex-M0PLUS Processor and Core Peripherals---------------- */
+#define __CM0PLUS_REV 0x0001 /*!< Cortex-M0PLUS Core Revision */
+#define __MPU_PRESENT 0 /*!< MPU present or not */
+#define __NVIC_PRIO_BITS 2 /*!< Number of Bits used for Priority Levels */
+#define __Vendor_SysTickConfig 0 /*!< Set to 1 if different SysTick Config is used */
+#define __VTOR_PRESENT 1 /*!< Set to 1 if CPU supports Vector Table Offset Register */
+/** @} */ /* End of group Configuration_of_CMSIS */
+
+#include "core_cm0plus.h" /*!< Cortex-M0PLUS processor and core peripherals */
+#include "system_LPC82x.h" /*!< LPC82x System */
+
+
+/* ================================================================================ */
+/* ================ Device Specific Peripheral Section ================ */
+/* ================================================================================ */
+
+
+/** @addtogroup Device_Peripheral_Registers
+ * @{
+ */
+
+
+/* ------------------- Start of section using anonymous unions ------------------ */
+#if defined(__CC_ARM)
+ #pragma push
+ #pragma anon_unions
+#elif defined(__ICCARM__)
+ #pragma language=extended
+#elif defined(__GNUC__)
+ /* anonymous unions are enabled by default */
+#elif defined(__TMS470__)
+/* anonymous unions are enabled by default */
+#elif defined(__TASKING__)
+ #pragma warning 586
+#else
+ #warning Not supported compiler type
+#endif
+
+
+
+/* ================================================================================ */
+/* ================ WWDT ================ */
+/* ================================================================================ */
+
+
+/**
+ * @brief Windowed Watchdog Timer (WWDT) (WWDT)
+ */
+
+typedef struct { /*!< (@ 0x40000000) WWDT Structure */
+ __IO uint32_t MOD; /*!< (@ 0x40000000) Watchdog mode register. This register contains
+ the basic mode and status of the Watchdog Timer. */
+ __IO uint32_t TC; /*!< (@ 0x40000004) Watchdog timer constant register. This 24-bit
+ register determines the time-out value. */
+ __O uint32_t FEED; /*!< (@ 0x40000008) Watchdog feed sequence register. Writing 0xAA
+ followed by 0x55 to this register reloads the Watchdog timer
+ with the value contained in WDTC. */
+ __I uint32_t TV; /*!< (@ 0x4000000C) Watchdog timer value register. This 24-bit register
+ reads out the current value of the Watchdog timer. */
+ __I uint32_t RESERVED0;
+ __IO uint32_t WARNINT; /*!< (@ 0x40000014) Watchdog Warning Interrupt compare value. */
+ __IO uint32_t WINDOW; /*!< (@ 0x40000018) Watchdog Window compare value. */
+} LPC_WWDT_Type;
+
+
+/* ================================================================================ */
+/* ================ MRT ================ */
+/* ================================================================================ */
+
+
+/**
+ * @brief Multi-Rate Timer (MRT) (MRT)
+ */
+
+typedef struct { /*!< (@ 0x40004000) MRT Structure */
+ __IO uint32_t INTVAL0; /*!< (@ 0x40004000) MRT0 Time interval value register. This value
+ is loaded into the TIMER0 register. */
+ __I uint32_t TIMER0; /*!< (@ 0x40004004) MRT0 Timer register. This register reads the
+ value of the down-counter. */
+ __IO uint32_t CTRL0; /*!< (@ 0x40004008) MRT0 Control register. This register controls
+ the MRT0 modes. */
+ __IO uint32_t STAT0; /*!< (@ 0x4000400C) MRT0 Status register. */
+ __IO uint32_t INTVAL1; /*!< (@ 0x40004010) MRT0 Time interval value register. This value
+ is loaded into the TIMER0 register. */
+ __I uint32_t TIMER1; /*!< (@ 0x40004014) MRT0 Timer register. This register reads the
+ value of the down-counter. */
+ __IO uint32_t CTRL1; /*!< (@ 0x40004018) MRT0 Control register. This register controls
+ the MRT0 modes. */
+ __IO uint32_t STAT1; /*!< (@ 0x4000401C) MRT0 Status register. */
+ __IO uint32_t INTVAL2; /*!< (@ 0x40004020) MRT0 Time interval value register. This value
+ is loaded into the TIMER0 register. */
+ __I uint32_t TIMER2; /*!< (@ 0x40004024) MRT0 Timer register. This register reads the
+ value of the down-counter. */
+ __IO uint32_t CTRL2; /*!< (@ 0x40004028) MRT0 Control register. This register controls
+ the MRT0 modes. */
+ __IO uint32_t STAT2; /*!< (@ 0x4000402C) MRT0 Status register. */
+ __IO uint32_t INTVAL3; /*!< (@ 0x40004030) MRT0 Time interval value register. This value
+ is loaded into the TIMER0 register. */
+ __I uint32_t TIMER3; /*!< (@ 0x40004034) MRT0 Timer register. This register reads the
+ value of the down-counter. */
+ __IO uint32_t CTRL3; /*!< (@ 0x40004038) MRT0 Control register. This register controls
+ the MRT0 modes. */
+ __IO uint32_t STAT3; /*!< (@ 0x4000403C) MRT0 Status register. */
+ __I uint32_t RESERVED0[45];
+ __I uint32_t IDLE_CH; /*!< (@ 0x400040F4) Idle channel register. This register returns
+ the number of the first idle channel. */
+ __IO uint32_t IRQ_FLAG; /*!< (@ 0x400040F8) Global interrupt flag register */
+} LPC_MRT_Type;
+
+
+/* ================================================================================ */
+/* ================ WKT ================ */
+/* ================================================================================ */
+
+
+/**
+ * @brief Self wake-up timer (WKT) (WKT)
+ */
+
+typedef struct { /*!< (@ 0x40008000) WKT Structure */
+ __IO uint32_t CTRL; /*!< (@ 0x40008000) Self wake-up timer control register. */
+ __I uint32_t RESERVED0[2];
+ __IO uint32_t COUNT; /*!< (@ 0x4000800C) Counter register. */
+} LPC_WKT_Type;
+
+
+/* ================================================================================ */
+/* ================ SWM ================ */
+/* ================================================================================ */
+
+
+/**
+ * @brief Switch matrix (SWM) (SWM)
+ */
+
+typedef struct { /*!< (@ 0x4000C000) SWM Structure */
+ union {
+ __IO uint32_t PINASSIGN[12];
+ struct {
+ __IO uint32_t PINASSIGN0; /*!< (@ 0x4000C000) Pin assign register 0. Assign movable functions
+ U0_TXD, U0_RXD, U0_RTS, U0_CTS. */
+ __IO uint32_t PINASSIGN1; /*!< (@ 0x4000C004) Pin assign register 1. Assign movable functions
+ U0_SCLK, U1_TXD, U1_RXD, U1_RTS. */
+ __IO uint32_t PINASSIGN2; /*!< (@ 0x4000C008) Pin assign register 2. Assign movable functions
+ U1_CTS, U1_SCLK, U2_TXD, U2_RXD. */
+ __IO uint32_t PINASSIGN3; /*!< (@ 0x4000C00C) Pin assign register 3. Assign movable function
+ U2_RTS, U2_CTS, U2_SCLK, SPI0_SCK. */
+ __IO uint32_t PINASSIGN4; /*!< (@ 0x4000C010) Pin assign register 4. Assign movable functions
+ SPI0_MOSI, SPI0_MISO, SPI0_SSEL0, SPI0_SSEL1. */
+ __IO uint32_t PINASSIGN5; /*!< (@ 0x4000C014) Pin assign register 5. Assign movable functions
+ SPI0_SSEL2, SPI0_SSEL3, SPI1_SCK, SPI1_MOSI */
+ __IO uint32_t PINASSIGN6; /*!< (@ 0x4000C018) Pin assign register 6. Assign movable functions
+ SPI1_MISO, SPI1_SSEL0, SPI1_SSEL1, SCT0_IN0. */
+ __IO uint32_t PINASSIGN7; /*!< (@ 0x4000C01C) Pin assign register 7. Assign movable functions
+ SCT_IN1, SCT_IN2, SCT_IN3, SCT_OUT0. */
+ __IO uint32_t PINASSIGN8; /*!< (@ 0x4000C020) Pin assign register 8. Assign movable functions
+ SCT_OUT1, SCT_OUT2, SCT_OUT3, SCT_OUT4. */
+ __IO uint32_t PINASSIGN9; /*!< (@ 0x4000C024) Pin assign register 9. Assign movable functions
+ SCT_OUT5, I2C1_SDA, I2C1_SCL, I2C2_SDA. */
+ __IO uint32_t PINASSIGN10; /*!< (@ 0x4000C028) Pin assign register 10. Assign movable functions
+ I2C2_SCL, I2C3_SDA, I2C3_SCL, ADC_PINTRIG0. */
+ __IO uint32_t PINASSIGN11; /*!< (@ 0x4000C02C) Pin assign register 11. Assign movable functions
+ ADC_PINTRIG1, ACMP_O, CLKOUT, GPIO_INT_BMAT */
+ };
+ };
+ __I uint32_t RESERVED0[100];
+ __IO uint32_t PINENABLE0; /*!< (@ 0x4000C1C0) Pin enable register 0. Enables fixed-pin functions
+ ACMP_I0, ACMP_I1, SWCLK, SWDIO, XTALIN, XTALOUT, RESET, CLKIN,
+ VDDCMP. */
+} LPC_SWM_Type;
+
+
+/* ================================================================================ */
+/* ================ ADC ================ */
+/* ================================================================================ */
+
+
+/**
+ * @brief 12-bit Analog-to-Digital Converter (ADC) (ADC)
+ */
+
+typedef struct { /*!< (@ 0x4001C000) ADC Structure */
+ __IO uint32_t CTRL; /*!< (@ 0x4001C000) A/D Control Register. Contains the clock divide
+ value, enable bits for each sequence and the A/D power-down
+ bit. */
+ __I uint32_t RESERVED0;
+ __IO uint32_t SEQA_CTRL; /*!< (@ 0x4001C008) A/D Conversion Sequence-A control Register: Controls
+ triggering and channel selection for conversion sequence-A.
+ Also specifies interrupt mode for sequence-A. */
+ __IO uint32_t SEQB_CTRL; /*!< (@ 0x4001C00C) A/D Conversion Sequence-B Control Register: Controls
+ triggering and channel selection for conversion sequence-B.
+ Also specifies interrupt mode for sequence-B. */
+ __IO uint32_t SEQA_GDAT; /*!< (@ 0x4001C010) A/D Sequence-A Global Data Register. This register
+ contains the result of the most recent A/D conversion performed
+ under sequence-A */
+ __IO uint32_t SEQB_GDAT; /*!< (@ 0x4001C014) A/D Sequence-B Global Data Register. This register
+ contains the result of the most recent A/D conversion performed
+ under sequence-B */
+ __I uint32_t RESERVED1[2];
+ __I uint32_t DAT0; /*!< (@ 0x4001C020) A/D Channel 0 Data Register. This register contains
+ the result of the most recent conversion completed on channel
+ 0. */
+ __I uint32_t DAT1; /*!< (@ 0x4001C024) A/D Channel 0 Data Register. This register contains
+ the result of the most recent conversion completed on channel
+ 0. */
+ __I uint32_t DAT2; /*!< (@ 0x4001C028) A/D Channel 0 Data Register. This register contains
+ the result of the most recent conversion completed on channel
+ 0. */
+ __I uint32_t DAT3; /*!< (@ 0x4001C02C) A/D Channel 0 Data Register. This register contains
+ the result of the most recent conversion completed on channel
+ 0. */
+ __I uint32_t DAT4; /*!< (@ 0x4001C030) A/D Channel 0 Data Register. This register contains
+ the result of the most recent conversion completed on channel
+ 0. */
+ __I uint32_t DAT5; /*!< (@ 0x4001C034) A/D Channel 0 Data Register. This register contains
+ the result of the most recent conversion completed on channel
+ 0. */
+ __I uint32_t DAT6; /*!< (@ 0x4001C038) A/D Channel 0 Data Register. This register contains
+ the result of the most recent conversion completed on channel
+ 0. */
+ __I uint32_t DAT7; /*!< (@ 0x4001C03C) A/D Channel 0 Data Register. This register contains
+ the result of the most recent conversion completed on channel
+ 0. */
+ __I uint32_t DAT8; /*!< (@ 0x4001C040) A/D Channel 0 Data Register. This register contains
+ the result of the most recent conversion completed on channel
+ 0. */
+ __I uint32_t DAT9; /*!< (@ 0x4001C044) A/D Channel 0 Data Register. This register contains
+ the result of the most recent conversion completed on channel
+ 0. */
+ __I uint32_t DAT10; /*!< (@ 0x4001C048) A/D Channel 0 Data Register. This register contains
+ the result of the most recent conversion completed on channel
+ 0. */
+ __I uint32_t DAT11; /*!< (@ 0x4001C04C) A/D Channel 0 Data Register. This register contains
+ the result of the most recent conversion completed on channel
+ 0. */
+ __IO uint32_t THR0_LOW; /*!< (@ 0x4001C050) A/D Low Compare Threshold Register 0 : Contains
+ the lower threshold level for automatic threshold comparison
+ for any channels linked to threshold pair 0. */
+ __IO uint32_t THR1_LOW; /*!< (@ 0x4001C054) A/D Low Compare Threshold Register 1: Contains
+ the lower threshold level for automatic threshold comparison
+ for any channels linked to threshold pair 1. */
+ __IO uint32_t THR0_HIGH; /*!< (@ 0x4001C058) A/D High Compare Threshold Register 0: Contains
+ the upper threshold level for automatic threshold comparison
+ for any channels linked to threshold pair 0. */
+ __IO uint32_t THR1_HIGH; /*!< (@ 0x4001C05C) A/D High Compare Threshold Register 1: Contains
+ the upper threshold level for automatic threshold comparison
+ for any channels linked to threshold pair 1. */
+ __IO uint32_t CHAN_THRSEL; /*!< (@ 0x4001C060) A/D Channel-Threshold Select Register. Specifies
+ which set of threshold compare registers are to be used for
+ each channel */
+ __IO uint32_t INTEN; /*!< (@ 0x4001C064) A/D Interrupt Enable Register. This register
+ contains enable bits that enable the sequence-A, sequence-B,
+ threshold compare and data overrun interrupts to be generated. */
+ __IO uint32_t FLAGS; /*!< (@ 0x4001C068) A/D Flags Register. Contains the four interrupt
+ request flags and the individual component overrun and threshold-compare
+ flags. (The overrun bits replicate information stored in the
+ result registers). */
+ __IO uint32_t TRM; /*!< (@ 0x4001C06C) ADC trim register. */
+} LPC_ADC_Type;
+
+
+/* ================================================================================ */
+/* ================ PMU ================ */
+/* ================================================================================ */
+
+
+/**
+ * @brief Power Management Unit (PMU) (PMU)
+ */
+
+typedef struct { /*!< (@ 0x40020000) PMU Structure */
+ __IO uint32_t PCON; /*!< (@ 0x40020000) Power control register */
+ __IO uint32_t GPREG0; /*!< (@ 0x40020004) General purpose register 0 */
+ __IO uint32_t GPREG1; /*!< (@ 0x40020008) General purpose register 0 */
+ __IO uint32_t GPREG2; /*!< (@ 0x4002000C) General purpose register 0 */
+ __IO uint32_t GPREG3; /*!< (@ 0x40020010) General purpose register 0 */
+ __IO uint32_t DPDCTRL; /*!< (@ 0x40020014) Deep power-down control register. Also includes
+ bits for general purpose storage. */
+} LPC_PMU_Type;
+
+
+/* ================================================================================ */
+/* ================ CMP ================ */
+/* ================================================================================ */
+
+
+/**
+ * @brief Analog comparator (CMP)
+ */
+
+typedef struct { /*!< (@ 0x40024000) CMP Structure */
+ __IO uint32_t CTRL; /*!< (@ 0x40024000) Comparator control register */
+ __IO uint32_t LAD; /*!< (@ 0x40024004) Voltage ladder register */
+} LPC_CMP_Type;
+
+
+/* ================================================================================ */
+/* ================ DMATRIGMUX ================ */
+/* ================================================================================ */
+
+
+/**
+ * @brief DMA trigger mux (DMATRIGMUX)
+ */
+
+typedef struct { /*!< (@ 0x40028000) DMATRIGMUX Structure */
+ __IO uint32_t DMA_ITRIG_INMUX0; /*!< (@ 0x40028000) Input mux register for trigger inputs 0 to 23
+ connected to DMA channel 0. Selects from ADC, SCT, ACMP, pin
+ interrupts, and DMA requests. */
+ __IO uint32_t DMA_ITRIG_INMUX1; /*!< (@ 0x40028004) Input mux register for trigger inputs 0 to 23
+ connected to DMA channel 0. Selects from ADC, SCT, ACMP, pin
+ interrupts, and DMA requests. */
+ __IO uint32_t DMA_ITRIG_INMUX2; /*!< (@ 0x40028008) Input mux register for trigger inputs 0 to 23
+ connected to DMA channel 0. Selects from ADC, SCT, ACMP, pin
+ interrupts, and DMA requests. */
+ __IO uint32_t DMA_ITRIG_INMUX3; /*!< (@ 0x4002800C) Input mux register for trigger inputs 0 to 23
+ connected to DMA channel 0. Selects from ADC, SCT, ACMP, pin
+ interrupts, and DMA requests. */
+ __IO uint32_t DMA_ITRIG_INMUX4; /*!< (@ 0x40028010) Input mux register for trigger inputs 0 to 23
+ connected to DMA channel 0. Selects from ADC, SCT, ACMP, pin
+ interrupts, and DMA requests. */
+ __IO uint32_t DMA_ITRIG_INMUX5; /*!< (@ 0x40028014) Input mux register for trigger inputs 0 to 23
+ connected to DMA channel 0. Selects from ADC, SCT, ACMP, pin
+ interrupts, and DMA requests. */
+ __IO uint32_t DMA_ITRIG_INMUX6; /*!< (@ 0x40028018) Input mux register for trigger inputs 0 to 23
+ connected to DMA channel 0. Selects from ADC, SCT, ACMP, pin
+ interrupts, and DMA requests. */
+ __IO uint32_t DMA_ITRIG_INMUX7; /*!< (@ 0x4002801C) Input mux register for trigger inputs 0 to 23
+ connected to DMA channel 0. Selects from ADC, SCT, ACMP, pin
+ interrupts, and DMA requests. */
+ __IO uint32_t DMA_ITRIG_INMUX8; /*!< (@ 0x40028020) Input mux register for trigger inputs 0 to 23
+ connected to DMA channel 0. Selects from ADC, SCT, ACMP, pin
+ interrupts, and DMA requests. */
+ __IO uint32_t DMA_ITRIG_INMUX9; /*!< (@ 0x40028024) Input mux register for trigger inputs 0 to 23
+ connected to DMA channel 0. Selects from ADC, SCT, ACMP, pin
+ interrupts, and DMA requests. */
+ __IO uint32_t DMA_ITRIG_INMUX10; /*!< (@ 0x40028028) Input mux register for trigger inputs 0 to 23
+ connected to DMA channel 0. Selects from ADC, SCT, ACMP, pin
+ interrupts, and DMA requests. */
+ __IO uint32_t DMA_ITRIG_INMUX11; /*!< (@ 0x4002802C) Input mux register for trigger inputs 0 to 23
+ connected to DMA channel 0. Selects from ADC, SCT, ACMP, pin
+ interrupts, and DMA requests. */
+ __IO uint32_t DMA_ITRIG_INMUX12; /*!< (@ 0x40028030) Input mux register for trigger inputs 0 to 23
+ connected to DMA channel 0. Selects from ADC, SCT, ACMP, pin
+ interrupts, and DMA requests. */
+ __IO uint32_t DMA_ITRIG_INMUX13; /*!< (@ 0x40028034) Input mux register for trigger inputs 0 to 23
+ connected to DMA channel 0. Selects from ADC, SCT, ACMP, pin
+ interrupts, and DMA requests. */
+ __IO uint32_t DMA_ITRIG_INMUX14; /*!< (@ 0x40028038) Input mux register for trigger inputs 0 to 23
+ connected to DMA channel 0. Selects from ADC, SCT, ACMP, pin
+ interrupts, and DMA requests. */
+ __IO uint32_t DMA_ITRIG_INMUX15; /*!< (@ 0x4002803C) Input mux register for trigger inputs 0 to 23
+ connected to DMA channel 0. Selects from ADC, SCT, ACMP, pin
+ interrupts, and DMA requests. */
+ __IO uint32_t DMA_ITRIG_INMUX16; /*!< (@ 0x40028040) Input mux register for trigger inputs 0 to 23
+ connected to DMA channel 0. Selects from ADC, SCT, ACMP, pin
+ interrupts, and DMA requests. */
+ __IO uint32_t DMA_ITRIG_INMUX17; /*!< (@ 0x40028044) Input mux register for trigger inputs 0 to 23
+ connected to DMA channel 0. Selects from ADC, SCT, ACMP, pin
+ interrupts, and DMA requests. */
+} LPC_DMATRIGMUX_Type;
+
+
+/* ================================================================================ */
+/* ================ INPUTMUX ================ */
+/* ================================================================================ */
+
+
+/**
+ * @brief Input multiplexing (INPUTMUX)
+ */
+
+typedef struct { /*!< (@ 0x4002C000) INPUTMUX Structure */
+ __IO uint32_t DMA_INMUX_INMUX0; /*!< (@ 0x4002C000) Input mux register for DMA trigger input 20.
+ Selects from 18 DMA trigger outputs. */
+ __IO uint32_t DMA_INMUX_INMUX1; /*!< (@ 0x4002C004) Input mux register for DMA trigger input 20.
+ Selects from 18 DMA trigger outputs. */
+ __I uint32_t RESERVED0[6];
+ __IO uint32_t SCT0_INMUX0; /*!< (@ 0x4002C020) Input mux register for SCT input 0 */
+ __IO uint32_t SCT0_INMUX1; /*!< (@ 0x4002C024) Input mux register for SCT input 0 */
+ __IO uint32_t SCT0_INMUX2; /*!< (@ 0x4002C028) Input mux register for SCT input 0 */
+ __IO uint32_t SCT0_INMUX3; /*!< (@ 0x4002C02C) Input mux register for SCT input 0 */
+} LPC_INPUTMUX_Type;
+
+
+/* ================================================================================ */
+/* ================ FLASHCTRL ================ */
+/* ================================================================================ */
+
+
+/**
+ * @brief Flash controller (FLASHCTRL)
+ */
+
+typedef struct { /*!< (@ 0x40040000) FLASHCTRL Structure */
+ __I uint32_t RESERVED0[4];
+ __IO uint32_t FLASHCFG; /*!< (@ 0x40040010) Flash configuration register */
+ __I uint32_t RESERVED1[3];
+ __IO uint32_t FMSSTART; /*!< (@ 0x40040020) Signature start address register */
+ __IO uint32_t FMSSTOP; /*!< (@ 0x40040024) Signature stop-address register */
+ __I uint32_t RESERVED2;
+ __I uint32_t FMSW0; /*!< (@ 0x4004002C) Signature Word */
+} LPC_FLASHCTRL_Type;
+
+
+/* ================================================================================ */
+/* ================ IOCON ================ */
+/* ================================================================================ */
+
+
+/**
+ * @brief I/O configuration (IOCON) (IOCON)
+ */
+
+typedef struct { /*!< (@ 0x40044000) IOCON Structure */
+ __IO uint32_t PIO0_17; /*!< (@ 0x40044000) I/O configuration for pin PIO0_17 */
+ __IO uint32_t PIO0_13; /*!< (@ 0x40044004) I/O configuration for pin PIO0_13 */
+ __IO uint32_t PIO0_12; /*!< (@ 0x40044008) I/O configuration for pin PIO0_12 */
+ __IO uint32_t PIO0_5; /*!< (@ 0x4004400C) I/O configuration for pin PIO0_5/RESET */
+ __IO uint32_t PIO0_4; /*!< (@ 0x40044010) I/O configuration for pin PIO0_4 */
+ __IO uint32_t PIO0_3; /*!< (@ 0x40044014) I/O configuration for pin PIO0_3/SWCLK */
+ __IO uint32_t PIO0_2; /*!< (@ 0x40044018) I/O configuration for pin PIO0_2/SWDIO */
+ __IO uint32_t PIO0_11; /*!< (@ 0x4004401C) I/O configuration for pin PIO0_11. This is the
+ pin configuration for the true open-drain pin. */
+ __IO uint32_t PIO0_10; /*!< (@ 0x40044020) I/O configuration for pin PIO0_10. This is the
+ pin configuration for the true open-drain pin. */
+ __IO uint32_t PIO0_16; /*!< (@ 0x40044024) I/O configuration for pin PIO0_16 */
+ __IO uint32_t PIO0_15; /*!< (@ 0x40044028) I/O configuration for pin PIO0_15 */
+ __IO uint32_t PIO0_1; /*!< (@ 0x4004402C) I/O configuration for pin PIO0_17 */
+ __I uint32_t RESERVED0;
+ __IO uint32_t PIO0_9; /*!< (@ 0x40044034) I/O configuration for pin PIO0_9/XTALOUT */
+ __IO uint32_t PIO0_8; /*!< (@ 0x40044038) I/O configuration for pin PIO0_8/XTALIN */
+ __IO uint32_t PIO0_7; /*!< (@ 0x4004403C) I/O configuration for pin PIO0_7 */
+ __IO uint32_t PIO0_6; /*!< (@ 0x40044040) I/O configuration for pin PIO0_6/VDDCMP */
+ __IO uint32_t PIO0_0; /*!< (@ 0x40044044) I/O configuration for pin PIO0_0/ACMP_I0 */
+ __IO uint32_t PIO0_14; /*!< (@ 0x40044048) I/O configuration for pin PIO0_14 */
+ __I uint32_t RESERVED1;
+ __IO uint32_t PIO0_28; /*!< (@ 0x40044050) I/O configuration for pin PIO0_28 */
+ __IO uint32_t PIO0_27; /*!< (@ 0x40044054) I/O configuration for pin PIO0_27 */
+ __IO uint32_t PIO0_26; /*!< (@ 0x40044058) I/O configuration for pin PIO0_26 */
+ __IO uint32_t PIO0_25; /*!< (@ 0x4004405C) I/O configuration for pin PIO0_25 */
+ __IO uint32_t PIO0_24; /*!< (@ 0x40044060) I/O configuration for pin PIO0_24 */
+ __IO uint32_t PIO0_23; /*!< (@ 0x40044064) I/O configuration for pin PIO0_23/ADC_3 */
+ __IO uint32_t PIO0_22; /*!< (@ 0x40044068) I/O configuration for pin PIO0_22/ADC_4 */
+ __IO uint32_t PIO0_21; /*!< (@ 0x4004406C) I/O configuration for pin PIO0_21/ACMP_I4/ADC_5 */
+ __IO uint32_t PIO0_20; /*!< (@ 0x40044070) I/O configuration for pin PIO0_20/ADC_6 */
+ __IO uint32_t PIO0_19; /*!< (@ 0x40044074) I/O configuration for pin PIO0_19/ADC_7 */
+ __IO uint32_t PIO0_18; /*!< (@ 0x40044078) I/O configuration for pin PIO0_18/ADC_8 */
+} LPC_IOCON_Type;
+
+
+/* ================================================================================ */
+/* ================ SYSCON ================ */
+/* ================================================================================ */
+
+
+/**
+ * @brief System configuration (SYSCON) (SYSCON)
+ */
+
+typedef struct { /*!< (@ 0x40048000) SYSCON Structure */
+ __IO uint32_t SYSMEMREMAP; /*!< (@ 0x40048000) System memory remap */
+ __IO uint32_t PRESETCTRL; /*!< (@ 0x40048004) Peripheral reset control */
+ __IO uint32_t SYSPLLCTRL; /*!< (@ 0x40048008) System PLL control */
+ __I uint32_t SYSPLLSTAT; /*!< (@ 0x4004800C) System PLL status */
+ __I uint32_t RESERVED0[4];
+ __IO uint32_t SYSOSCCTRL; /*!< (@ 0x40048020) System oscillator control */
+ __IO uint32_t WDTOSCCTRL; /*!< (@ 0x40048024) Watchdog oscillator control */
+ __IO uint32_t IRCCTRL; /*!< (@ 0x40048028) IRC control */
+ __I uint32_t RESERVED1;
+ __IO uint32_t SYSRSTSTAT; /*!< (@ 0x40048030) System reset status register */
+ __I uint32_t RESERVED2[3];
+ __IO uint32_t SYSPLLCLKSEL; /*!< (@ 0x40048040) System PLL clock source select */
+ __IO uint32_t SYSPLLCLKUEN; /*!< (@ 0x40048044) System PLL clock source update enable */
+ __I uint32_t RESERVED3[10];
+ __IO uint32_t MAINCLKSEL; /*!< (@ 0x40048070) Main clock source select */
+ __IO uint32_t MAINCLKUEN; /*!< (@ 0x40048074) Main clock source update enable */
+ __IO uint32_t SYSAHBCLKDIV; /*!< (@ 0x40048078) System clock divider */
+ __I uint32_t RESERVED4;
+ __IO uint32_t SYSAHBCLKCTRL; /*!< (@ 0x40048080) System clock control */
+ __I uint32_t RESERVED5[4];
+ __IO uint32_t UARTCLKDIV; /*!< (@ 0x40048094) USART clock divider */
+ __I uint32_t RESERVED6[18];
+ __IO uint32_t CLKOUTSEL; /*!< (@ 0x400480E0) CLKOUT clock source select */
+ __IO uint32_t CLKOUTUEN; /*!< (@ 0x400480E4) CLKOUT clock source update enable */
+ __IO uint32_t CLKOUTDIV; /*!< (@ 0x400480E8) CLKOUT clock divider */
+ __I uint32_t RESERVED7;
+ __IO uint32_t UARTFRGDIV; /*!< (@ 0x400480F0) USART1 to USART4 common fractional generator
+ divider value */
+ __IO uint32_t UARTFRGMULT; /*!< (@ 0x400480F4) USART1 to USART4 common fractional generator
+ multiplier value */
+ __I uint32_t RESERVED8;
+ __IO uint32_t EXTTRACECMD; /*!< (@ 0x400480FC) External trace buffer command register */
+ __I uint32_t PIOPORCAP0; /*!< (@ 0x40048100) POR captured PIO status 0 */
+ __I uint32_t RESERVED9[12];
+ __IO uint32_t IOCONCLKDIV6; /*!< (@ 0x40048134) Peripheral clock 6 to the IOCON block for programmable
+ glitch filter */
+ __I uint32_t RESERVED10[6];
+ __IO uint32_t BODCTRL; /*!< (@ 0x40048150) Brown-Out Detect */
+ __IO uint32_t SYSTCKCAL; /*!< (@ 0x40048154) System tick counter calibration */
+ __I uint32_t RESERVED11[6];
+ __IO uint32_t IRQLATENCY; /*!< (@ 0x40048170) IQR delay. Allows trade-off between interrupt
+ latency and determinism. */
+ __IO uint32_t NMISRC; /*!< (@ 0x40048174) NMI Source Control */
+ union {
+ __IO uint32_t PINTSEL[8];
+ struct {
+ __IO uint32_t PINTSEL0; /*!< (@ 0x40048178) GPIO Pin Interrupt Select register 0 */
+ __IO uint32_t PINTSEL1; /*!< (@ 0x4004817C) GPIO Pin Interrupt Select register 0 */
+ __IO uint32_t PINTSEL2; /*!< (@ 0x40048180) GPIO Pin Interrupt Select register 0 */
+ __IO uint32_t PINTSEL3; /*!< (@ 0x40048184) GPIO Pin Interrupt Select register 0 */
+ __IO uint32_t PINTSEL4; /*!< (@ 0x40048188) GPIO Pin Interrupt Select register 0 */
+ __IO uint32_t PINTSEL5; /*!< (@ 0x4004818C) GPIO Pin Interrupt Select register 0 */
+ __IO uint32_t PINTSEL6; /*!< (@ 0x40048190) GPIO Pin Interrupt Select register 0 */
+ __IO uint32_t PINTSEL7; /*!< (@ 0x40048194) GPIO Pin Interrupt Select register 0 */
+ };
+ };
+ __I uint32_t RESERVED12[27];
+ __IO uint32_t STARTERP0; /*!< (@ 0x40048204) Start logic 0 pin wake-up enable register */
+ __I uint32_t RESERVED13[3];
+ __IO uint32_t STARTERP1; /*!< (@ 0x40048214) Start logic 1 interrupt wake-up enable register */
+ __I uint32_t RESERVED14[6];
+ __IO uint32_t PDSLEEPCFG; /*!< (@ 0x40048230) Power-down states in deep-sleep mode */
+ __IO uint32_t PDAWAKECFG; /*!< (@ 0x40048234) Power-down states for wake-up from deep-sleep */
+ __IO uint32_t PDRUNCFG; /*!< (@ 0x40048238) Power configuration register */
+ __I uint32_t RESERVED15[111];
+ __I uint32_t DEVICE_ID; /*!< (@ 0x400483F8) Device ID */
+} LPC_SYSCON_Type;
+
+
+/* ================================================================================ */
+/* ================ I2C0 ================ */
+/* ================================================================================ */
+
+
+/**
+ * @brief I2C0-bus interface (I2C0)
+ */
+
+typedef struct { /*!< (@ 0x40050000) I2C0 Structure */
+ __IO uint32_t CFG; /*!< (@ 0x40050000) Configuration for shared functions. */
+ __IO uint32_t STAT; /*!< (@ 0x40050004) Status register for Master, Slave, and Monitor
+ functions. */
+ __IO uint32_t INTENSET; /*!< (@ 0x40050008) Interrupt Enable Set and read register. */
+ __O uint32_t INTENCLR; /*!< (@ 0x4005000C) Interrupt Enable Clear register. */
+ __IO uint32_t TIMEOUT; /*!< (@ 0x40050010) Time-out value register. */
+ __IO uint32_t CLKDIV; /*!< (@ 0x40050014) Clock pre-divider for the entire I2C block. This
+ determines what time increments are used for the MSTTIME and
+ SLVTIME registers. */
+ __I uint32_t INTSTAT; /*!< (@ 0x40050018) Interrupt Status register for Master, Slave,
+ and Monitor functions. */
+ __I uint32_t RESERVED0;
+ __IO uint32_t MSTCTL; /*!< (@ 0x40050020) Master control register. */
+ __IO uint32_t MSTTIME; /*!< (@ 0x40050024) Master timing configuration. */
+ __IO uint32_t MSTDAT; /*!< (@ 0x40050028) Combined Master receiver and transmitter data
+ register. */
+ __I uint32_t RESERVED1[5];
+ __IO uint32_t SLVCTL; /*!< (@ 0x40050040) Slave control register. */
+ __IO uint32_t SLVDAT; /*!< (@ 0x40050044) Combined Slave receiver and transmitter data
+ register. */
+ union {
+ __IO uint32_t SLVADR[4];
+ struct {
+ __IO uint32_t SLVADR0; /*!< (@ 0x40050048) Slave address 0. */
+ __IO uint32_t SLVADR1; /*!< (@ 0x4005004C) Slave address 0. */
+ __IO uint32_t SLVADR2; /*!< (@ 0x40050050) Slave address 0. */
+ __IO uint32_t SLVADR3; /*!< (@ 0x40050054) Slave address 0. */
+ };
+ };
+ __IO uint32_t SLVQUAL0; /*!< (@ 0x40050058) Slave Qualification for address 0. */
+ __I uint32_t RESERVED2[9];
+ __I uint32_t MONRXDAT; /*!< (@ 0x40050080) Monitor receiver data register. */
+} LPC_I2C0_Type;
+
+
+/* ================================================================================ */
+/* ================ SPI0 ================ */
+/* ================================================================================ */
+
+
+/**
+ * @brief SPI0 (SPI0)
+ */
+
+typedef struct { /*!< (@ 0x40058000) SPI0 Structure */
+ __IO uint32_t CFG; /*!< (@ 0x40058000) SPI Configuration register */
+ __IO uint32_t DLY; /*!< (@ 0x40058004) SPI Delay register */
+ __IO uint32_t STAT; /*!< (@ 0x40058008) SPI Status. Some status flags can be cleared
+ by writing a 1 to that bit position */
+ __IO uint32_t INTENSET; /*!< (@ 0x4005800C) SPI Interrupt Enable read and Set. A complete
+ value may be read from this register. Writing a 1 to any implemented
+ bit position causes that bit to be set. */
+ __O uint32_t INTENCLR; /*!< (@ 0x40058010) SPI Interrupt Enable Clear. Writing a 1 to any
+ implemented bit position causes the corresponding bit in INTENSET
+ to be cleared. */
+ __I uint32_t RXDAT; /*!< (@ 0x40058014) SPI Receive Data */
+ __IO uint32_t TXDATCTL; /*!< (@ 0x40058018) SPI Transmit Data with Control */
+ __IO uint32_t TXDAT; /*!< (@ 0x4005801C) SPI Transmit Data */
+ __IO uint32_t TXCTL; /*!< (@ 0x40058020) SPI Transmit Control */
+ __IO uint32_t DIV; /*!< (@ 0x40058024) SPI clock Divider */
+ __I uint32_t INTSTAT; /*!< (@ 0x40058028) SPI Interrupt Status */
+} LPC_SPI0_Type;
+
+
+/* ================================================================================ */
+/* ================ USART0 ================ */
+/* ================================================================================ */
+
+
+/**
+ * @brief USART0 (USART0)
+ */
+
+typedef struct { /*!< (@ 0x40064000) USART0 Structure */
+ __IO uint32_t CFG; /*!< (@ 0x40064000) USART Configuration register. Basic USART configuration
+ settings that typically are not changed during operation. */
+ __IO uint32_t CTL; /*!< (@ 0x40064004) USART Control register. USART control settings
+ that are more likely to change during operation. */
+ __IO uint32_t STAT; /*!< (@ 0x40064008) USART Status register. The complete status value
+ can be read here. Writing ones clears some bits in the register.
+ Some bits can be cleared by writing a 1 to them. */
+ __IO uint32_t INTENSET; /*!< (@ 0x4006400C) Interrupt Enable read and Set register. Contains
+ an individual interrupt enable bit for each potential USART
+ interrupt. A complete value may be read from this register.
+ Writing a 1 to any implemented bit position causes that bit
+ to be set. */
+ __O uint32_t INTENCLR; /*!< (@ 0x40064010) Interrupt Enable Clear register. Allows clearing
+ any combination of bits in the INTENSET register. Writing a
+ 1 to any implemented bit position causes the corresponding bit
+ to be cleared. */
+ __I uint32_t RXDAT; /*!< (@ 0x40064014) Receiver Data register. Contains the last character
+ received. */
+ __I uint32_t RXDATSTAT; /*!< (@ 0x40064018) Receiver Data with Status register. Combines
+ the last character received with the current USART receive status.
+ Allows DMA or software to recover incoming data and status together. */
+ __IO uint32_t TXDAT; /*!< (@ 0x4006401C) Transmit Data register. Data to be transmitted
+ is written here. */
+ __IO uint32_t BRG; /*!< (@ 0x40064020) Baud Rate Generator register. 16-bit integer
+ baud rate divisor value. */
+ __I uint32_t INTSTAT; /*!< (@ 0x40064024) Interrupt status register. Reflects interrupts
+ that are currently enabled. */
+ __IO uint32_t OSR; /*!< (@ 0x40064028) Oversample selection register for asynchronous
+ communication. */
+ __IO uint32_t ADDR; /*!< (@ 0x4006402C) Address register for automatic address matching. */
+} LPC_USART0_Type;
+
+
+/* ================================================================================ */
+/* ================ CRC ================ */
+/* ================================================================================ */
+
+
+/**
+ * @brief Cyclic Redundancy Check (CRC) engine (CRC)
+ */
+
+typedef struct { /*!< (@ 0x50000000) CRC Structure */
+ __IO uint32_t MODE; /*!< (@ 0x50000000) CRC mode register */
+ __IO uint32_t SEED; /*!< (@ 0x50000004) CRC seed register */
+
+ union {
+ __O uint32_t WR_DATA; /*!< (@ 0x50000008) CRC data register */
+ __I uint32_t SUM; /*!< (@ 0x50000008) CRC checksum register */
+ };
+} LPC_CRC_Type;
+
+
+/* ================================================================================ */
+/* ================ SCT ================ */
+/* ================================================================================ */
+
+
+/**
+ * @brief State Configurable Timer (SCT) (SCT)
+ */
+
+typedef struct { /*!< (@ 0x50004000) SCT Structure */
+ __IO uint32_t CONFIG; /*!< (@ 0x50004000) SCT configuration register */
+ __IO uint32_t CTRL; /*!< (@ 0x50004004) SCT control register */
+ __IO uint32_t LIMIT; /*!< (@ 0x50004008) SCT limit register */
+ __IO uint32_t HALT; /*!< (@ 0x5000400C) SCT halt condition register */
+ __IO uint32_t STOP; /*!< (@ 0x50004010) SCT stop condition register */
+ __IO uint32_t START; /*!< (@ 0x50004014) SCT start condition register */
+ __I uint32_t RESERVED0[10];
+ __IO uint32_t COUNT; /*!< (@ 0x50004040) SCT counter register */
+ __IO uint32_t STATE; /*!< (@ 0x50004044) SCT state register */
+ __I uint32_t INPUT; /*!< (@ 0x50004048) SCT input register */
+ __IO uint32_t REGMODE; /*!< (@ 0x5000404C) SCT match/capture registers mode register */
+ __IO uint32_t OUTPUT; /*!< (@ 0x50004050) SCT output register */
+ __IO uint32_t OUTPUTDIRCTRL; /*!< (@ 0x50004054) SCT output counter direction control register */
+ __IO uint32_t RES; /*!< (@ 0x50004058) SCT conflict resolution register */
+ __IO uint32_t DMAREQ0; /*!< (@ 0x5000405C) SCT DMA request 0 register */
+ __IO uint32_t DMAREQ1; /*!< (@ 0x50004060) SCT DMA request 1 register */
+ __I uint32_t RESERVED1[35];
+ __IO uint32_t EVEN; /*!< (@ 0x500040F0) SCT event enable register */
+ __IO uint32_t EVFLAG; /*!< (@ 0x500040F4) SCT event flag register */
+ __IO uint32_t CONEN; /*!< (@ 0x500040F8) SCT conflict enable register */
+ __IO uint32_t CONFLAG; /*!< (@ 0x500040FC) SCT conflict flag register */
+
+union {
+ union {
+ __IO uint32_t CAP0; /*!< (@ 0x50004100) SCT capture register of capture channel 0 to
+ 7; REGMOD0 to REGMODE7 = 1 */
+ __IO uint32_t MATCH0; /*!< (@ 0x50004100) SCT match value register of match channels 0
+ to 7; REGMOD0 to REGMODE7 = 0 */
+ };
+
+ union {
+ __IO uint32_t CAP1; /*!< (@ 0x50004104) SCT capture register of capture channel 0 to
+ 7; REGMOD0 to REGMODE7 = 1 */
+ __IO uint32_t MATCH1; /*!< (@ 0x50004104) SCT match value register of match channels 0
+ to 7; REGMOD0 to REGMODE7 = 0 */
+ };
+
+ union {
+ __IO uint32_t CAP2; /*!< (@ 0x50004108) SCT capture register of capture channel 0 to
+ 7; REGMOD0 to REGMODE7 = 1 */
+ __IO uint32_t MATCH2; /*!< (@ 0x50004108) SCT match value register of match channels 0
+ to 7; REGMOD0 to REGMODE7 = 0 */
+ };
+
+ union {
+ __IO uint32_t MATCH3; /*!< (@ 0x5000410C) SCT match value register of match channels 0
+ to 7; REGMOD0 to REGMODE7 = 0 */
+ __IO uint32_t CAP3; /*!< (@ 0x5000410C) SCT capture register of capture channel 0 to
+ 7; REGMOD0 to REGMODE7 = 1 */
+ };
+
+ union {
+ __IO uint32_t CAP4; /*!< (@ 0x50004110) SCT capture register of capture channel 0 to
+ 7; REGMOD0 to REGMODE7 = 1 */
+ __IO uint32_t MATCH4; /*!< (@ 0x50004110) SCT match value register of match channels 0
+ to 7; REGMOD0 to REGMODE7 = 0 */
+ };
+
+ union {
+ __IO uint32_t MATCH5; /*!< (@ 0x50004114) SCT match value register of match channels 0
+ to 7; REGMOD0 to REGMODE7 = 0 */
+ __IO uint32_t CAP5; /*!< (@ 0x50004114) SCT capture register of capture channel 0 to
+ 7; REGMOD0 to REGMODE7 = 1 */
+ };
+
+ union {
+ __IO uint32_t CAP6; /*!< (@ 0x50004118) SCT capture register of capture channel 0 to
+ 7; REGMOD0 to REGMODE7 = 1 */
+ __IO uint32_t MATCH6; /*!< (@ 0x50004118) SCT match value register of match channels 0
+ to 7; REGMOD0 to REGMODE7 = 0 */
+ };
+
+ union {
+ __IO uint32_t CAP7; /*!< (@ 0x5000411C) SCT capture register of capture channel 0 to
+ 7; REGMOD0 to REGMODE7 = 1 */
+ __IO uint32_t MATCH7; /*!< (@ 0x5000411C) SCT match value register of match channels 0
+ to 7; REGMOD0 to REGMODE7 = 0 */
+ };
+ __IO uint32_t CAP[8];
+ __IO uint32_t MATCH[8];
+};
+ __I uint32_t RESERVED2[56];
+
+ union {
+ struct {
+ union {
+ __IO uint32_t CAPCTRL0; /*!< (@ 0x50004200) SCT capture control register 0 to 7; REGMOD0
+ = 1 to REGMODE7 = 1 */
+ __IO uint32_t MATCHREL0; /*!< (@ 0x50004200) SCT match reload value register 0 to 7; REGMOD0
+ = 0 to REGMODE7 = 0 */
+ };
+
+ union {
+ __IO uint32_t CAPCTRL1; /*!< (@ 0x50004204) SCT capture control register 0 to 7; REGMOD0
+ = 1 to REGMODE7 = 1 */
+ __IO uint32_t MATCHREL1; /*!< (@ 0x50004204) SCT match reload value register 0 to 7; REGMOD0
+ = 0 to REGMODE7 = 0 */
+ };
+
+ union {
+ __IO uint32_t CAPCTRL2; /*!< (@ 0x50004208) SCT capture control register 0 to 7; REGMOD0
+ = 1 to REGMODE7 = 1 */
+ __IO uint32_t MATCHREL2; /*!< (@ 0x50004208) SCT match reload value register 0 to 7; REGMOD0
+ = 0 to REGMODE7 = 0 */
+ };
+
+ union {
+ __IO uint32_t MATCHREL3; /*!< (@ 0x5000420C) SCT match reload value register 0 to 7; REGMOD0
+ = 0 to REGMODE7 = 0 */
+ __IO uint32_t CAPCTRL3; /*!< (@ 0x5000420C) SCT capture control register 0 to 7; REGMOD0
+ = 1 to REGMODE7 = 1 */
+ };
+
+ union {
+ __IO uint32_t CAPCTRL4; /*!< (@ 0x50004210) SCT capture control register 0 to 7; REGMOD0
+ = 1 to REGMODE7 = 1 */
+ __IO uint32_t MATCHREL4; /*!< (@ 0x50004210) SCT match reload value register 0 to 7; REGMOD0
+ = 0 to REGMODE7 = 0 */
+ };
+
+ union {
+ __IO uint32_t CAPCTRL5; /*!< (@ 0x50004214) SCT capture control register 0 to 7; REGMOD0
+ = 1 to REGMODE7 = 1 */
+ __IO uint32_t MATCHREL5; /*!< (@ 0x50004214) SCT match reload value register 0 to 7; REGMOD0
+ = 0 to REGMODE7 = 0 */
+ };
+
+ union {
+ __IO uint32_t CAPCTRL6; /*!< (@ 0x50004218) SCT capture control register 0 to 7; REGMOD0
+ = 1 to REGMODE7 = 1 */
+ __IO uint32_t MATCHREL6; /*!< (@ 0x50004218) SCT match reload value register 0 to 7; REGMOD0
+ = 0 to REGMODE7 = 0 */
+ };
+
+ union {
+ __IO uint32_t CAPCTRL7; /*!< (@ 0x5000421C) SCT capture control register 0 to 7; REGMOD0
+ = 1 to REGMODE7 = 1 */
+ __IO uint32_t MATCHREL7; /*!< (@ 0x5000421C) SCT match reload value register 0 to 7; REGMOD0
+ = 0 to REGMODE7 = 0 */
+ };
+ };
+ __IO uint32_t MATCHREL[8];
+ };
+ __I uint32_t RESERVED3[56];
+
+ union {
+ struct {
+ __IO uint32_t EV0_STATE; /*!< (@ 0x50004300) SCT event state register 0 */
+ __IO uint32_t EV0_CTRL; /*!< (@ 0x50004304) SCT event control register 0 */
+ __IO uint32_t EV1_STATE; /*!< (@ 0x50004308) SCT event state register 0 */
+ __IO uint32_t EV1_CTRL; /*!< (@ 0x5000430C) SCT event control register 0 */
+ __IO uint32_t EV2_STATE; /*!< (@ 0x50004310) SCT event state register 0 */
+ __IO uint32_t EV2_CTRL; /*!< (@ 0x50004314) SCT event control register 0 */
+ __IO uint32_t EV3_STATE; /*!< (@ 0x50004318) SCT event state register 0 */
+ __IO uint32_t EV3_CTRL; /*!< (@ 0x5000431C) SCT event control register 0 */
+ __IO uint32_t EV4_STATE; /*!< (@ 0x50004320) SCT event state register 0 */
+ __IO uint32_t EV4_CTRL; /*!< (@ 0x50004324) SCT event control register 0 */
+ __IO uint32_t EV5_STATE; /*!< (@ 0x50004328) SCT event state register 0 */
+ __IO uint32_t EV5_CTRL; /*!< (@ 0x5000432C) SCT event control register 0 */
+ __IO uint32_t EV6_STATE; /*!< (@ 0x50004330) SCT event state register 0 */
+ __IO uint32_t EV6_CTRL; /*!< (@ 0x50004334) SCT event control register 0 */
+ __IO uint32_t EV7_STATE; /*!< (@ 0x50004338) SCT event state register 0 */
+ __IO uint32_t EV7_CTRL; /*!< (@ 0x5000433C) SCT event control register 0 */
+ };
+ __IO struct {
+ uint32_t STATE;
+ uint32_t CTRL;
+ } EVENT[8];
+ };
+
+ __I uint32_t RESERVED4[112];
+
+ union {
+ struct {
+ __IO uint32_t OUT0_SET; /*!< (@ 0x50004500) SCT output 0 set register */
+ __IO uint32_t OUT0_CLR; /*!< (@ 0x50004504) SCT output 0 clear register */
+ __IO uint32_t OUT1_SET; /*!< (@ 0x50004508) SCT output 0 set register */
+ __IO uint32_t OUT1_CLR; /*!< (@ 0x5000450C) SCT output 0 clear register */
+ __IO uint32_t OUT2_SET; /*!< (@ 0x50004510) SCT output 0 set register */
+ __IO uint32_t OUT2_CLR; /*!< (@ 0x50004514) SCT output 0 clear register */
+ __IO uint32_t OUT3_SET; /*!< (@ 0x50004518) SCT output 0 set register */
+ __IO uint32_t OUT3_CLR; /*!< (@ 0x5000451C) SCT output 0 clear register */
+ __IO uint32_t OUT4_SET; /*!< (@ 0x50004520) SCT output 0 set register */
+ __IO uint32_t OUT4_CLR; /*!< (@ 0x50004524) SCT output 0 clear register */
+ __IO uint32_t OUT5_SET; /*!< (@ 0x50004528) SCT output 0 set register */
+ __IO uint32_t OUT5_CLR; /*!< (@ 0x5000452C) SCT output 0 clear register */
+ };
+ __IO struct {
+ uint32_t SET;
+ uint32_t CLR;
+ } OUT[6];
+};
+
+} LPC_SCT_Type;
+
+
+/* ================================================================================ */
+/* ================ DMA ================ */
+/* ================================================================================ */
+
+
+/**
+ * @brief DMA controller (DMA)
+ */
+
+typedef struct { /*!< (@ 0x50008000) DMA Structure */
+ __IO uint32_t CTRL; /*!< (@ 0x50008000) DMA control. */
+ __I uint32_t INTSTAT; /*!< (@ 0x50008004) Interrupt status. */
+ __IO uint32_t SRAMBASE; /*!< (@ 0x50008008) SRAM address of the channel configuration table. */
+ __I uint32_t RESERVED0[5];
+ __IO uint32_t ENABLESET0; /*!< (@ 0x50008020) Channel Enable read and Set for all DMA channels. */
+ __I uint32_t RESERVED1;
+ __O uint32_t ENABLECLR0; /*!< (@ 0x50008028) Channel Enable Clear for all DMA channels. */
+ __I uint32_t RESERVED2;
+ __I uint32_t ACTIVE0; /*!< (@ 0x50008030) Channel Active status for all DMA channels. */
+ __I uint32_t RESERVED3;
+ __I uint32_t BUSY0; /*!< (@ 0x50008038) Channel Busy status for all DMA channels. */
+ __I uint32_t RESERVED4;
+ __IO uint32_t ERRINT0; /*!< (@ 0x50008040) Error Interrupt status for all DMA channels. */
+ __I uint32_t RESERVED5;
+ __IO uint32_t INTENSET0; /*!< (@ 0x50008048) Interrupt Enable read and Set for all DMA channels. */
+ __I uint32_t RESERVED6;
+ __O uint32_t INTENCLR0; /*!< (@ 0x50008050) Interrupt Enable Clear for all DMA channels. */
+ __I uint32_t RESERVED7;
+ __IO uint32_t INTA0; /*!< (@ 0x50008058) Interrupt A status for all DMA channels. */
+ __I uint32_t RESERVED8;
+ __IO uint32_t INTB0; /*!< (@ 0x50008060) Interrupt B status for all DMA channels. */
+ __I uint32_t RESERVED9;
+ __O uint32_t SETVALID0; /*!< (@ 0x50008068) Set ValidPending control bits for all DMA channels. */
+ __I uint32_t RESERVED10;
+ __O uint32_t SETTRIG0; /*!< (@ 0x50008070) Set Trigger control bits for all DMA channels. */
+ __I uint32_t RESERVED11;
+ __O uint32_t ABORT0; /*!< (@ 0x50008078) Channel Abort control for all DMA channels. */
+ __I uint32_t RESERVED12[225];
+ __IO uint32_t CFG0; /*!< (@ 0x50008400) Configuration register for DMA channel 0. */
+ __I uint32_t CTLSTAT0; /*!< (@ 0x50008404) Control and status register for DMA channel 0. */
+ __IO uint32_t XFERCFG0; /*!< (@ 0x50008408) Transfer configuration register for DMA channel
+ 0. */
+ __I uint32_t RESERVED13;
+ __IO uint32_t CFG1; /*!< (@ 0x50008410) Configuration register for DMA channel 0. */
+ __I uint32_t CTLSTAT1; /*!< (@ 0x50008414) Control and status register for DMA channel 0. */
+ __IO uint32_t XFERCFG1; /*!< (@ 0x50008418) Transfer configuration register for DMA channel
+ 0. */
+ __I uint32_t RESERVED14;
+ __IO uint32_t CFG2; /*!< (@ 0x50008420) Configuration register for DMA channel 0. */
+ __I uint32_t CTLSTAT2; /*!< (@ 0x50008424) Control and status register for DMA channel 0. */
+ __IO uint32_t XFERCFG2; /*!< (@ 0x50008428) Transfer configuration register for DMA channel
+ 0. */
+ __I uint32_t RESERVED15;
+ __IO uint32_t CFG3; /*!< (@ 0x50008430) Configuration register for DMA channel 0. */
+ __I uint32_t CTLSTAT3; /*!< (@ 0x50008434) Control and status register for DMA channel 0. */
+ __IO uint32_t XFERCFG3; /*!< (@ 0x50008438) Transfer configuration register for DMA channel
+ 0. */
+ __I uint32_t RESERVED16;
+ __IO uint32_t CFG4; /*!< (@ 0x50008440) Configuration register for DMA channel 0. */
+ __I uint32_t CTLSTAT4; /*!< (@ 0x50008444) Control and status register for DMA channel 0. */
+ __IO uint32_t XFERCFG4; /*!< (@ 0x50008448) Transfer configuration register for DMA channel
+ 0. */
+ __I uint32_t RESERVED17;
+ __IO uint32_t CFG5; /*!< (@ 0x50008450) Configuration register for DMA channel 0. */
+ __I uint32_t CTLSTAT5; /*!< (@ 0x50008454) Control and status register for DMA channel 0. */
+ __IO uint32_t XFERCFG5; /*!< (@ 0x50008458) Transfer configuration register for DMA channel
+ 0. */
+ __I uint32_t RESERVED18;
+ __IO uint32_t CFG6; /*!< (@ 0x50008460) Configuration register for DMA channel 0. */
+ __I uint32_t CTLSTAT6; /*!< (@ 0x50008464) Control and status register for DMA channel 0. */
+ __IO uint32_t XFERCFG6; /*!< (@ 0x50008468) Transfer configuration register for DMA channel
+ 0. */
+ __I uint32_t RESERVED19;
+ __IO uint32_t CFG7; /*!< (@ 0x50008470) Configuration register for DMA channel 0. */
+ __I uint32_t CTLSTAT7; /*!< (@ 0x50008474) Control and status register for DMA channel 0. */
+ __IO uint32_t XFERCFG7; /*!< (@ 0x50008478) Transfer configuration register for DMA channel
+ 0. */
+ __I uint32_t RESERVED20;
+ __IO uint32_t CFG8; /*!< (@ 0x50008480) Configuration register for DMA channel 0. */
+ __I uint32_t CTLSTAT8; /*!< (@ 0x50008484) Control and status register for DMA channel 0. */
+ __IO uint32_t XFERCFG8; /*!< (@ 0x50008488) Transfer configuration register for DMA channel
+ 0. */
+ __I uint32_t RESERVED21;
+ __IO uint32_t CFG9; /*!< (@ 0x50008490) Configuration register for DMA channel 0. */
+ __I uint32_t CTLSTAT9; /*!< (@ 0x50008494) Control and status register for DMA channel 0. */
+ __IO uint32_t XFERCFG9; /*!< (@ 0x50008498) Transfer configuration register for DMA channel
+ 0. */
+ __I uint32_t RESERVED22;
+ __IO uint32_t CFG10; /*!< (@ 0x500084A0) Configuration register for DMA channel 0. */
+ __I uint32_t CTLSTAT10; /*!< (@ 0x500084A4) Control and status register for DMA channel 0. */
+ __IO uint32_t XFERCFG10; /*!< (@ 0x500084A8) Transfer configuration register for DMA channel
+ 0. */
+ __I uint32_t RESERVED23;
+ __IO uint32_t CFG11; /*!< (@ 0x500084B0) Configuration register for DMA channel 0. */
+ __I uint32_t CTLSTAT11; /*!< (@ 0x500084B4) Control and status register for DMA channel 0. */
+ __IO uint32_t XFERCFG11; /*!< (@ 0x500084B8) Transfer configuration register for DMA channel
+ 0. */
+ __I uint32_t RESERVED24;
+ __IO uint32_t CFG12; /*!< (@ 0x500084C0) Configuration register for DMA channel 0. */
+ __I uint32_t CTLSTAT12; /*!< (@ 0x500084C4) Control and status register for DMA channel 0. */
+ __IO uint32_t XFERCFG12; /*!< (@ 0x500084C8) Transfer configuration register for DMA channel
+ 0. */
+ __I uint32_t RESERVED25;
+ __IO uint32_t CFG13; /*!< (@ 0x500084D0) Configuration register for DMA channel 0. */
+ __I uint32_t CTLSTAT13; /*!< (@ 0x500084D4) Control and status register for DMA channel 0. */
+ __IO uint32_t XFERCFG13; /*!< (@ 0x500084D8) Transfer configuration register for DMA channel
+ 0. */
+ __I uint32_t RESERVED26;
+ __IO uint32_t CFG14; /*!< (@ 0x500084E0) Configuration register for DMA channel 0. */
+ __I uint32_t CTLSTAT14; /*!< (@ 0x500084E4) Control and status register for DMA channel 0. */
+ __IO uint32_t XFERCFG14; /*!< (@ 0x500084E8) Transfer configuration register for DMA channel
+ 0. */
+ __I uint32_t RESERVED27;
+ __IO uint32_t CFG15; /*!< (@ 0x500084F0) Configuration register for DMA channel 0. */
+ __I uint32_t CTLSTAT15; /*!< (@ 0x500084F4) Control and status register for DMA channel 0. */
+ __IO uint32_t XFERCFG15; /*!< (@ 0x500084F8) Transfer configuration register for DMA channel
+ 0. */
+ __I uint32_t RESERVED28;
+ __IO uint32_t CFG16; /*!< (@ 0x50008500) Configuration register for DMA channel 0. */
+ __I uint32_t CTLSTAT16; /*!< (@ 0x50008504) Control and status register for DMA channel 0. */
+ __IO uint32_t XFERCFG16; /*!< (@ 0x50008508) Transfer configuration register for DMA channel
+ 0. */
+ __I uint32_t RESERVED29;
+ __IO uint32_t CFG17; /*!< (@ 0x50008510) Configuration register for DMA channel 0. */
+ __I uint32_t CTLSTAT17; /*!< (@ 0x50008514) Control and status register for DMA channel 0. */
+ __IO uint32_t XFERCFG17; /*!< (@ 0x50008518) Transfer configuration register for DMA channel
+ 0. */
+} LPC_DMA_Type;
+
+
+/* ================================================================================ */
+/* ================ GPIO_PORT ================ */
+/* ================================================================================ */
+
+
+/**
+ * @brief General Purpose I/O port (GPIO) (GPIO_PORT)
+ */
+
+typedef struct { /*!< (@ 0xA0000000) GPIO_PORT Structure */
+ __IO uint8_t B0; /*!< (@ 0xA0000000) Byte pin registers port 0; pins PIO0_0 to PIO0_28 */
+ __IO uint8_t B1; /*!< (@ 0xA0000001) Byte pin registers port 0; pins PIO0_0 to PIO0_28 */
+ __IO uint8_t B2; /*!< (@ 0xA0000002) Byte pin registers port 0; pins PIO0_0 to PIO0_28 */
+ __IO uint8_t B3; /*!< (@ 0xA0000003) Byte pin registers port 0; pins PIO0_0 to PIO0_28 */
+ __IO uint8_t B4; /*!< (@ 0xA0000004) Byte pin registers port 0; pins PIO0_0 to PIO0_28 */
+ __IO uint8_t B5; /*!< (@ 0xA0000005) Byte pin registers port 0; pins PIO0_0 to PIO0_28 */
+ __IO uint8_t B6; /*!< (@ 0xA0000006) Byte pin registers port 0; pins PIO0_0 to PIO0_28 */
+ __IO uint8_t B7; /*!< (@ 0xA0000007) Byte pin registers port 0; pins PIO0_0 to PIO0_28 */
+ __IO uint8_t B8; /*!< (@ 0xA0000008) Byte pin registers port 0; pins PIO0_0 to PIO0_28 */
+ __IO uint8_t B9; /*!< (@ 0xA0000009) Byte pin registers port 0; pins PIO0_0 to PIO0_28 */
+ __IO uint8_t B10; /*!< (@ 0xA000000A) Byte pin registers port 0; pins PIO0_0 to PIO0_28 */
+ __IO uint8_t B11; /*!< (@ 0xA000000B) Byte pin registers port 0; pins PIO0_0 to PIO0_28 */
+ __IO uint8_t B12; /*!< (@ 0xA000000C) Byte pin registers port 0; pins PIO0_0 to PIO0_28 */
+ __IO uint8_t B13; /*!< (@ 0xA000000D) Byte pin registers port 0; pins PIO0_0 to PIO0_28 */
+ __IO uint8_t B14; /*!< (@ 0xA000000E) Byte pin registers port 0; pins PIO0_0 to PIO0_28 */
+ __IO uint8_t B15; /*!< (@ 0xA000000F) Byte pin registers port 0; pins PIO0_0 to PIO0_28 */
+ __IO uint8_t B16; /*!< (@ 0xA0000010) Byte pin registers port 0; pins PIO0_0 to PIO0_28 */
+ __IO uint8_t B17; /*!< (@ 0xA0000011) Byte pin registers port 0; pins PIO0_0 to PIO0_28 */
+ __IO uint8_t B18; /*!< (@ 0xA0000012) Byte pin registers port 0; pins PIO0_0 to PIO0_28 */
+ __IO uint8_t B19; /*!< (@ 0xA0000013) Byte pin registers port 0; pins PIO0_0 to PIO0_28 */
+ __IO uint8_t B20; /*!< (@ 0xA0000014) Byte pin registers port 0; pins PIO0_0 to PIO0_28 */
+ __IO uint8_t B21; /*!< (@ 0xA0000015) Byte pin registers port 0; pins PIO0_0 to PIO0_28 */
+ __IO uint8_t B22; /*!< (@ 0xA0000016) Byte pin registers port 0; pins PIO0_0 to PIO0_28 */
+ __IO uint8_t B23; /*!< (@ 0xA0000017) Byte pin registers port 0; pins PIO0_0 to PIO0_28 */
+ __IO uint8_t B24; /*!< (@ 0xA0000018) Byte pin registers port 0; pins PIO0_0 to PIO0_28 */
+ __IO uint8_t B25; /*!< (@ 0xA0000019) Byte pin registers port 0; pins PIO0_0 to PIO0_28 */
+ __IO uint8_t B26; /*!< (@ 0xA000001A) Byte pin registers port 0; pins PIO0_0 to PIO0_28 */
+ __IO uint8_t B27; /*!< (@ 0xA000001B) Byte pin registers port 0; pins PIO0_0 to PIO0_28 */
+ __IO uint8_t B28; /*!< (@ 0xA000001C) Byte pin registers port 0; pins PIO0_0 to PIO0_28 */
+ __I uint8_t RESERVED0[4067];
+ __IO uint32_t W0; /*!< (@ 0xA0001000) Word pin registers port 0 */
+ __IO uint32_t W1; /*!< (@ 0xA0001004) Word pin registers port 0 */
+ __IO uint32_t W2; /*!< (@ 0xA0001008) Word pin registers port 0 */
+ __IO uint32_t W3; /*!< (@ 0xA000100C) Word pin registers port 0 */
+ __IO uint32_t W4; /*!< (@ 0xA0001010) Word pin registers port 0 */
+ __IO uint32_t W5; /*!< (@ 0xA0001014) Word pin registers port 0 */
+ __IO uint32_t W6; /*!< (@ 0xA0001018) Word pin registers port 0 */
+ __IO uint32_t W7; /*!< (@ 0xA000101C) Word pin registers port 0 */
+ __IO uint32_t W8; /*!< (@ 0xA0001020) Word pin registers port 0 */
+ __IO uint32_t W9; /*!< (@ 0xA0001024) Word pin registers port 0 */
+ __IO uint32_t W10; /*!< (@ 0xA0001028) Word pin registers port 0 */
+ __IO uint32_t W11; /*!< (@ 0xA000102C) Word pin registers port 0 */
+ __IO uint32_t W12; /*!< (@ 0xA0001030) Word pin registers port 0 */
+ __IO uint32_t W13; /*!< (@ 0xA0001034) Word pin registers port 0 */
+ __IO uint32_t W14; /*!< (@ 0xA0001038) Word pin registers port 0 */
+ __IO uint32_t W15; /*!< (@ 0xA000103C) Word pin registers port 0 */
+ __IO uint32_t W16; /*!< (@ 0xA0001040) Word pin registers port 0 */
+ __IO uint32_t W17; /*!< (@ 0xA0001044) Word pin registers port 0 */
+ __IO uint32_t W18; /*!< (@ 0xA0001048) Word pin registers port 0 */
+ __IO uint32_t W19; /*!< (@ 0xA000104C) Word pin registers port 0 */
+ __IO uint32_t W20; /*!< (@ 0xA0001050) Word pin registers port 0 */
+ __IO uint32_t W21; /*!< (@ 0xA0001054) Word pin registers port 0 */
+ __IO uint32_t W22; /*!< (@ 0xA0001058) Word pin registers port 0 */
+ __IO uint32_t W23; /*!< (@ 0xA000105C) Word pin registers port 0 */
+ __IO uint32_t W24; /*!< (@ 0xA0001060) Word pin registers port 0 */
+ __IO uint32_t W25; /*!< (@ 0xA0001064) Word pin registers port 0 */
+ __IO uint32_t W26; /*!< (@ 0xA0001068) Word pin registers port 0 */
+ __IO uint32_t W27; /*!< (@ 0xA000106C) Word pin registers port 0 */
+ __IO uint32_t W28; /*!< (@ 0xA0001070) Word pin registers port 0 */
+ __I uint32_t RESERVED1[995];
+ __IO uint32_t DIR0; /*!< (@ 0xA0002000) Direction registers port 0 */
+ __I uint32_t RESERVED2[31];
+ __IO uint32_t MASK0; /*!< (@ 0xA0002080) Mask register port 0 */
+ __I uint32_t RESERVED3[31];
+ __IO uint32_t PIN0; /*!< (@ 0xA0002100) Port pin register port 0 */
+ __I uint32_t RESERVED4[31];
+ __IO uint32_t MPIN0; /*!< (@ 0xA0002180) Masked port register port 0 */
+ __I uint32_t RESERVED5[31];
+ __IO uint32_t SET0; /*!< (@ 0xA0002200) Write: Set register for port 0 Read: output bits
+ for port 0 */
+ __I uint32_t RESERVED6[31];
+ __O uint32_t CLR0; /*!< (@ 0xA0002280) Clear port 0 */
+ __I uint32_t RESERVED7[31];
+ __O uint32_t NOT0; /*!< (@ 0xA0002300) Toggle port 0 */
+ __I uint32_t RESERVED8[31];
+ __O uint32_t DIRSET0; /*!< (@ 0xA0002380) Set pin direction bits for port 0. */
+ __I uint32_t RESERVED9[31];
+ __O uint32_t DIRCLR0; /*!< (@ 0xA0002400) Clear pin direction bits for port 0. */
+ __I uint32_t RESERVED10[31];
+ __O uint32_t DIRNOT0; /*!< (@ 0xA0002480) Toggle pin direction bits for port 0. */
+} LPC_GPIO_PORT_Type;
+
+
+/* ================================================================================ */
+/* ================ PIN_INT ================ */
+/* ================================================================================ */
+
+
+/**
+ * @brief Pin interrupt and pattern match engine (PIN_INT)
+ */
+
+typedef struct { /*!< (@ 0xA0004000) PIN_INT Structure */
+ __IO uint32_t ISEL; /*!< (@ 0xA0004000) Pin Interrupt Mode register */
+ __IO uint32_t IENR; /*!< (@ 0xA0004004) Pin interrupt level or rising edge interrupt
+ enable register */
+ __O uint32_t SIENR; /*!< (@ 0xA0004008) Pin interrupt level (rising edge) interrupt set
+ register */
+ __O uint32_t CIENR; /*!< (@ 0xA000400C) Pin interrupt level or rising edge interrupt
+ clear register */
+ __IO uint32_t IENF; /*!< (@ 0xA0004010) Pin interrupt active level or falling edge interrupt
+ enable register */
+ __O uint32_t SIENF; /*!< (@ 0xA0004014) Pin interrupt active level or falling edge interrupt
+ set register */
+ __O uint32_t CIENF; /*!< (@ 0xA0004018) Pin interrupt active level (falling edge) interrupt
+ clear register */
+ __IO uint32_t RISE; /*!< (@ 0xA000401C) Pin interrupt rising edge register */
+ __IO uint32_t FALL; /*!< (@ 0xA0004020) Pin interrupt falling edge register */
+ __IO uint32_t IST; /*!< (@ 0xA0004024) Pin interrupt status register */
+ __IO uint32_t PMCTRL; /*!< (@ 0xA0004028) GPIO pattern match interrupt control register */
+ __IO uint32_t PMSRC; /*!< (@ 0xA000402C) GPIO pattern match interrupt bit-slice source
+ register */
+ __IO uint32_t PMCFG; /*!< (@ 0xA0004030) GPIO pattern match interrupt bit slice configuration
+ register */
+} LPC_PIN_INT_Type;
+
+
+/* -------------------- End of section using anonymous unions ------------------- */
+#if defined(__CC_ARM)
+ #pragma pop
+#elif defined(__ICCARM__)
+ /* leave anonymous unions enabled */
+#elif defined(__GNUC__)
+ /* anonymous unions are enabled by default */
+#elif defined(__TMS470__)
+ /* anonymous unions are enabled by default */
+#elif defined(__TASKING__)
+ #pragma warning restore
+#else
+ #warning Not supported compiler type
+#endif
+
+
+
+
+/* ================================================================================ */
+/* ================ Peripheral memory map ================ */
+/* ================================================================================ */
+
+#define LPC_WWDT_BASE 0x40000000UL
+#define LPC_MRT_BASE 0x40004000UL
+#define LPC_WKT_BASE 0x40008000UL
+#define LPC_SWM_BASE 0x4000C000UL
+#define LPC_ADC_BASE 0x4001C000UL
+#define LPC_PMU_BASE 0x40020000UL
+#define LPC_CMP_BASE 0x40024000UL
+#define LPC_DMATRIGMUX_BASE 0x40028000UL
+#define LPC_INPUTMUX_BASE 0x4002C000UL
+#define LPC_FLASHCTRL_BASE 0x40040000UL
+#define LPC_IOCON_BASE 0x40044000UL
+#define LPC_SYSCON_BASE 0x40048000UL
+#define LPC_I2C0_BASE 0x40050000UL
+#define LPC_I2C1_BASE 0x40054000UL
+#define LPC_SPI0_BASE 0x40058000UL
+#define LPC_SPI1_BASE 0x4005C000UL
+#define LPC_USART0_BASE 0x40064000UL
+#define LPC_USART1_BASE 0x40068000UL
+#define LPC_USART2_BASE 0x4006C000UL
+#define LPC_I2C2_BASE 0x40070000UL
+#define LPC_I2C3_BASE 0x40074000UL
+#define LPC_CRC_BASE 0x50000000UL
+#define LPC_SCT_BASE 0x50004000UL
+#define LPC_DMA_BASE 0x50008000UL
+#define LPC_GPIO_PORT_BASE 0xA0000000UL
+#define LPC_PIN_INT_BASE 0xA0004000UL
+
+
+/* ================================================================================ */
+/* ================ Peripheral declaration ================ */
+/* ================================================================================ */
+
+#define LPC_WWDT ((LPC_WWDT_Type *) LPC_WWDT_BASE)
+#define LPC_MRT ((LPC_MRT_Type *) LPC_MRT_BASE)
+#define LPC_WKT ((LPC_WKT_Type *) LPC_WKT_BASE)
+#define LPC_SWM ((LPC_SWM_Type *) LPC_SWM_BASE)
+#define LPC_ADC ((LPC_ADC_Type *) LPC_ADC_BASE)
+#define LPC_PMU ((LPC_PMU_Type *) LPC_PMU_BASE)
+#define LPC_CMP ((LPC_CMP_Type *) LPC_CMP_BASE)
+#define LPC_DMATRIGMUX ((LPC_DMATRIGMUX_Type *) LPC_DMATRIGMUX_BASE)
+#define LPC_INPUTMUX ((LPC_INPUTMUX_Type *) LPC_INPUTMUX_BASE)
+#define LPC_FLASHCTRL ((LPC_FLASHCTRL_Type *) LPC_FLASHCTRL_BASE)
+#define LPC_IOCON ((LPC_IOCON_Type *) LPC_IOCON_BASE)
+#define LPC_SYSCON ((LPC_SYSCON_Type *) LPC_SYSCON_BASE)
+#define LPC_I2C0 ((LPC_I2C0_Type *) LPC_I2C0_BASE)
+#define LPC_I2C1 ((LPC_I2C0_Type *) LPC_I2C1_BASE)
+#define LPC_SPI0 ((LPC_SPI0_Type *) LPC_SPI0_BASE)
+#define LPC_SPI1 ((LPC_SPI0_Type *) LPC_SPI1_BASE)
+#define LPC_USART0 ((LPC_USART0_Type *) LPC_USART0_BASE)
+#define LPC_USART1 ((LPC_USART0_Type *) LPC_USART1_BASE)
+#define LPC_USART2 ((LPC_USART0_Type *) LPC_USART2_BASE)
+#define LPC_I2C2 ((LPC_I2C0_Type *) LPC_I2C2_BASE)
+#define LPC_I2C3 ((LPC_I2C0_Type *) LPC_I2C3_BASE)
+#define LPC_CRC ((LPC_CRC_Type *) LPC_CRC_BASE)
+#define LPC_SCT ((LPC_SCT_Type *) LPC_SCT_BASE)
+#define LPC_DMA ((LPC_DMA_Type *) LPC_DMA_BASE)
+#define LPC_GPIO_PORT ((LPC_GPIO_PORT_Type *) LPC_GPIO_PORT_BASE)
+#define LPC_PIN_INT ((LPC_PIN_INT_Type *) LPC_PIN_INT_BASE)
+
+
+/** @} */ /* End of group Device_Peripheral_Registers */
+/** @} */ /* End of group LPC82x */
+/** @} */ /* End of group (null) */
+
+#ifdef __cplusplus
+}
+#endif
+
+
+#endif /* LPC82x_H */
+