Diff: targets/TARGET_Maxim/TARGET_MAX32625/mxc/uart.h

Revision:

150:02e0a0aed4ec

diff -r 156823d33999 -r 02e0a0aed4ec targets/TARGET_Maxim/TARGET_MAX32625/mxc/uart.h
--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/targets/TARGET_Maxim/TARGET_MAX32625/mxc/uart.h	Tue Nov 08 17:45:16 2016 +0000
@@ -0,0 +1,271 @@
+/*******************************************************************************
+ * Copyright (C) 2016 Maxim Integrated Products, Inc., All Rights Reserved.
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a
+ * copy of this software and associated documentation files (the "Software"),
+ * to deal in the Software without restriction, including without limitation
+ * the rights to use, copy, modify, merge, publish, distribute, sublicense,
+ * and/or sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included
+ * in all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS
+ * OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.
+ * IN NO EVENT SHALL MAXIM INTEGRATED BE LIABLE FOR ANY CLAIM, DAMAGES
+ * OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE,
+ * ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
+ *
+ * Except as contained in this notice, the name of Maxim Integrated
+ * Products, Inc. shall not be used except as stated in the Maxim Integrated
+ * Products, Inc. Branding Policy.
+ *
+ * The mere transfer of this software does not imply any licenses
+ * of trade secrets, proprietary technology, copyrights, patents,
+ * trademarks, maskwork rights, or any other form of intellectual
+ * property whatsoever. Maxim Integrated Products, Inc. retains all
+ * ownership rights.
+ *
+ * $Date: 2016-06-21 16:16:33 -0500 (Tue, 21 Jun 2016) $
+ * $Revision: 23447 $
+ *
+ ******************************************************************************/
+
+/**
+ * @file    uart.h
+ * @brief   UART driver header file.
+ */
+
+#include "mxc_config.h"
+#include "mxc_sys.h"
+#include "uart_regs.h"
+
+#ifndef _UART_H_
+#define _UART_H_
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+/***** Definitions *****/
+
+/// @brief Defines number of data bits per transmission/reception
+typedef enum {
+    UART_DATA_SIZE_5_BITS = MXC_V_UART_CTRL_DATA_SIZE_5_BITS,
+    UART_DATA_SIZE_6_BITS = MXC_V_UART_CTRL_DATA_SIZE_6_BITS,
+    UART_DATA_SIZE_7_BITS = MXC_V_UART_CTRL_DATA_SIZE_7_BITS,
+    UART_DATA_SIZE_8_BITS = MXC_V_UART_CTRL_DATA_SIZE_8_BITS
+}
+uart_data_size_t;
+
+/// @brief Defines number of data bits per transmission/reception
+typedef enum {
+    UART_PARITY_DISABLE = MXC_V_UART_CTRL_PARITY_DISABLE,
+    UART_PARITY_ODD     = MXC_V_UART_CTRL_PARITY_ODD,
+    UART_PARITY_EVEN    = MXC_V_UART_CTRL_PARITY_EVEN,
+    UART_PARITY_MARK    = MXC_V_UART_CTRL_PARITY_MARK
+} uart_parity_t;
+
+/// @brief  UART configuration type.
+typedef struct {
+    uint8_t extra_stop;             ///< 0 for one stop bit, 1 for two stop bits.
+    uint8_t cts;                    ///< 1 to enable CTS.
+    uint8_t rts;                    ///< 1 to enable RTS.
+    uint32_t baud;                  ///< Baud rate in Hz.
+    uart_data_size_t size;          ///< Number of bits in each character.
+    uart_parity_t parity;           ///< Even or odd parity.
+} uart_cfg_t;
+
+/**
+ * @brief   Type alias for UART request structure
+ */
+typedef struct uart_req uart_req_t;
+
+/**
+ * @brief   Type alias \c uart_async_callback for function signature: \code void callback)(uart_req_t* , int error_code) \endcode
+ * @param   uart_req_t*     Pointer to the transaction request.
+ * @param   error_code      Return code for the UART request. @see mxc_errors.h.
+ */
+typedef void (*uart_async_callback)(uart_req_t*, int);
+
+/// @brief UART Transaction request, must remain allocated until callback has completed.
+struct uart_req {
+    uint8_t *data;    ///< Data buffer for characters.
+    unsigned len;     ///< Length of characters in data to send or receive.
+    unsigned num;     ///< Number of characters actually sent or received.
+    uart_async_callback callback; ///< A callback function pointer with alias signature \c uart_async_callback
+};
+
+
+/***** Globals *****/
+
+/***** Function Prototypes *****/
+
+/**
+ * @brief   Initialize and enable UART module.
+ * @param   uart        Pointer to UART regs.
+ * @param   cfg         Pointer to UART configuration.
+ * @param   sys_cfg     Pointer to system configuration object
+ * @returns #E_NO_ERROR if everything is successful
+ */
+int UART_Init(mxc_uart_regs_t *uart, const uart_cfg_t *cfg, const sys_cfg_uart_t *sys_cfg);
+
+/**
+ * @brief   Shutdown UART module.
+ * @param   uart    Pointer to UART regs.
+ * @returns #E_NO_ERROR if everything is successful
+ */
+int UART_Shutdown(mxc_uart_regs_t *uart);
+
+/**
+ * @brief   Write UART data. Will block until transaction is complete.
+ * @param   uart    Pointer to UART regs.
+ * @param   data    Pointer to buffer for write data.
+ * @param   len     Number of bytes to write.
+ * @note    Will return once data has been put into FIFO, not necessarily transmitted.
+ * @returns Number of bytes written if successful, error if unsuccessful.
+ */
+int UART_Write(mxc_uart_regs_t *uart, uint8_t* data, int len);
+
+/**
+ * @brief   Read UART data. Will block until transaction is complete.
+ * @param   uart    Pointer to UART regs.
+ * @param   data    Pointer to buffer for read data.
+ * @param   len     Number of bytes to read.
+ * @param   num     Optional pointer to number of bytes actually read.
+ *                  Pass NULL if undesired.
+ * @returns Number of bytes read is successful, error if unsuccessful.
+ */
+int UART_Read(mxc_uart_regs_t *uart, uint8_t* data, int len, int *num);
+
+/**
+ * @brief   Asynchronously Write UART data.
+ * @param   uart    Pointer to UART regs.
+ * @param   req     Request for a UART transaction.
+ * @note    Request struct must remain allocated until callback.
+ * @returns #E_NO_ERROR if everything is successful, error if unsuccessful.
+ */
+int UART_WriteAsync(mxc_uart_regs_t *uart, uart_req_t *req);
+
+/**
+ * @brief   Asynchronously Read UART data.
+ * @param   uart    Pointer to UART regs.
+ * @param   req     Pointer to request for a UART transaction.
+ * @note    Request struct must remain allocated until callback.
+ * @returns #E_NO_ERROR if everything is successful, error if unsuccessful.
+ */
+int UART_ReadAsync(mxc_uart_regs_t *uart, uart_req_t *req);
+
+/**
+ * @brief   Abort asynchronous request.
+ * @param   req     Pointer to request for a UART transaction.
+ * @returns #E_NO_ERROR if request aborted, error if unsuccessful.
+ */
+int UART_AbortAsync(uart_req_t *req);
+
+/**
+ * @brief   UART interrupt handler.
+ * @details This function should be called by the application from the interrupt
+ *          handler if UART interrupts are enabled. Alternately, this function
+ *          can be periodically called by the application if UART interrupts are
+ *          disabled. Only necessary to call this when using asynchronous functions.
+ * @param   uart     Pointer to UART regs.
+ */
+void UART_Handler(mxc_uart_regs_t *uart);
+
+/**
+ * @brief   Check to see if the UART is busy.
+ * @param   uart     Pointer to UART regs.
+ * @returns #E_NO_ERROR if idle, #E_BUSY if in use.
+ */
+int UART_Busy(mxc_uart_regs_t *uart);
+
+/**
+ * @brief   Attempt to prepare the UART for sleep.
+ * @param   uart     Pointer to UART regs.
+ * @details Checks for any ongoing transactions. Disables interrupts if the I2CM
+            is idle.
+ * @returns #E_NO_ERROR if ready to sleep, #E_BUSY if not ready for sleep.
+ */
+int UART_PrepForSleep(mxc_uart_regs_t *uart);
+
+/**
+ * @brief   Enables the UART without overwriting existing configuration.
+ * @param   uart    Pointer to UART regs.
+ */
+__STATIC_INLINE void UART_Enable(mxc_uart_regs_t *uart)
+{
+    uart->ctrl |= (MXC_F_UART_CTRL_UART_EN | MXC_F_UART_CTRL_TX_FIFO_EN |
+                   MXC_F_UART_CTRL_RX_FIFO_EN);
+}
+
+/**
+ * @brief   Drain all of the data in the RXFIFO.
+ * @param   uart    Pointer to UART regs.
+ */
+__STATIC_INLINE void UART_DrainRX(mxc_uart_regs_t *uart)
+{
+    uint32_t ctrl_save = uart->ctrl;
+    uart->ctrl = (ctrl_save & ~MXC_F_UART_CTRL_RX_FIFO_EN);
+    uart->ctrl = ctrl_save;
+}
+
+/**
+ * @brief   Drain all of the data in the TXFIFO.
+ * @param   uart    Pointer to UART regs.
+ */
+__STATIC_INLINE void UART_DrainTX(mxc_uart_regs_t *uart)
+{
+    uint32_t ctrl_save = uart->ctrl;
+    uart->ctrl = (ctrl_save & ~MXC_F_UART_CTRL_TX_FIFO_EN);
+    uart->ctrl = ctrl_save;
+}
+
+/**
+ * @brief   Write FIFO availability.
+ * @param   uart    Pointer to UART regs.
+ * @returns Number of empty bytes available in write FIFO.
+ */
+__STATIC_INLINE unsigned UART_NumWriteAvail(mxc_uart_regs_t *uart)
+{
+    return (MXC_UART_FIFO_DEPTH - (uart->tx_fifo_ctrl & MXC_F_UART_TX_FIFO_CTRL_FIFO_ENTRY));
+}
+
+/**
+ * @brief   Read FIFO availability.
+ * @param   uart    Pointer to UART regs.
+ * @returns Number of bytes in read FIFO.
+ */
+__STATIC_INLINE unsigned UART_NumReadAvail(mxc_uart_regs_t *uart)
+{
+    return (uart->rx_fifo_ctrl & MXC_F_UART_RX_FIFO_CTRL_FIFO_ENTRY);
+}
+
+/**
+ * @brief   Clear interrupt flags.
+ * @param   uart    Pointer to UART regs.
+ * @param   mask    Mask of interrupts to clear.
+ */
+__STATIC_INLINE void UART_ClearFlags(mxc_uart_regs_t *uart, uint32_t mask)
+{
+    uart->intfl = mask;
+}
+
+/**
+ * @brief   Get interrupt flags.
+ * @param   uart    Pointer to UART regs.
+ * @returns Mask of active flags.
+ */
+__STATIC_INLINE unsigned UART_GetFlags(mxc_uart_regs_t *uart)
+{
+    return (uart->intfl);
+}
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* _UART_H_ */