Maxim Ibragimov
mbed library sources. Supersedes mbed-src. Fixed broken STM32F1xx RTC on rtc_api.c
Dependents: Nucleo_F103RB_RTC_battery_bkup_pwr_off_okay
Fork of
mbed-dev
by 
mbed official
Diff: targets/cmsis/TARGET_NXP/TARGET_LPC81X/LPC8xx.h
- Revision:
- 144:ef7eb2e8f9f7
- Parent:
- 0:9b334a45a8ff
--- a/targets/cmsis/TARGET_NXP/TARGET_LPC81X/LPC8xx.h Tue Aug 02 14:07:36 2016 +0000
+++ b/targets/cmsis/TARGET_NXP/TARGET_LPC81X/LPC8xx.h Fri Sep 02 15:07:44 2016 +0100
@@ -1,710 +1,710 @@
-/****************************************************************************
- * $Id:: LPC8xx.h 6437 2012-10-31 11:06:06Z dep00694 $
- * Project: NXP LPC8xx software example
- *
- * Description:
- * CMSIS Cortex-M0+ Core Peripheral Access Layer Header File for
- * NXP LPC800 Device Series
- *
- ****************************************************************************
- * Software that is described herein is for illustrative purposes only
- * which provides customers with programming information regarding the
- * products. This software is supplied "AS IS" without any warranties.
- * NXP Semiconductors assumes no responsibility or liability for the
- * use of the software, conveys no license or title under any patent,
- * copyright, or mask work right to the product. NXP Semiconductors
- * reserves the right to make changes in the software without
- * notification. NXP Semiconductors also make no representation or
- * warranty that such application will be suitable for the specified
- * use without further testing or modification.
-
- * Permission to use, copy, modify, and distribute this software and its
- * documentation is hereby granted, under NXP Semiconductors'
- * relevant copyright in the software, without fee, provided that it
- * is used in conjunction with NXP Semiconductors microcontrollers. This
- * copyright, permission, and disclaimer notice must appear in all copies of
- * this code.
-****************************************************************************/
-#ifndef __LPC8xx_H__
-#define __LPC8xx_H__
-
-#ifdef __cplusplus
- extern "C" {
-#endif
-
-/** @addtogroup LPC8xx_Definitions LPC8xx Definitions
- This file defines all structures and symbols for LPC8xx:
- - Registers and bitfields
- - peripheral base address
- - PIO definitions
- @{
-*/
-
-
-/******************************************************************************/
-/* Processor and Core Peripherals */
-/******************************************************************************/
-/** @addtogroup LPC8xx_CMSIS LPC8xx CMSIS Definitions
- Configuration of the Cortex-M0+ Processor and Core Peripherals
- @{
-*/
-
-/*
- * ==========================================================================
- * ---------- Interrupt Number Definition -----------------------------------
- * ==========================================================================
- */
-typedef enum IRQn
-{
-/****** Cortex-M0 Processor Exceptions Numbers ***************************************************/
- Reset_IRQn = -15, /*!< 1 Reset Vector, invoked on Power up and warm reset*/
- NonMaskableInt_IRQn = -14, /*!< 2 Non Maskable Interrupt */
- HardFault_IRQn = -13, /*!< 3 Cortex-M0 Hard Fault Interrupt */
- SVCall_IRQn = -5, /*!< 11 Cortex-M0 SV Call Interrupt */
- PendSV_IRQn = -2, /*!< 14 Cortex-M0 Pend SV Interrupt */
- SysTick_IRQn = -1, /*!< 15 Cortex-M0 System Tick Interrupt */
-
-/****** LPC8xx Specific Interrupt Numbers ********************************************************/
- SPI0_IRQn = 0, /*!< SPI0 */
- SPI1_IRQn = 1, /*!< SPI1 */
- Reserved0_IRQn = 2, /*!< Reserved Interrupt */
- UART0_IRQn = 3, /*!< USART0 */
- UART1_IRQn = 4, /*!< USART1 */
- UART2_IRQn = 5, /*!< USART2 */
- Reserved1_IRQn = 6, /*!< Reserved Interrupt */
- Reserved2_IRQn = 7, /*!< Reserved Interrupt */
- I2C_IRQn = 8, /*!< I2C */
- SCT_IRQn = 9, /*!< SCT */
- MRT_IRQn = 10, /*!< MRT */
- CMP_IRQn = 11, /*!< CMP */
- WDT_IRQn = 12, /*!< WDT */
- BOD_IRQn = 13, /*!< BOD */
- Reserved3_IRQn = 14, /*!< Reserved Interrupt */
- WKT_IRQn = 15, /*!< WKT Interrupt */
- Reserved4_IRQn = 16, /*!< Reserved Interrupt */
- Reserved5_IRQn = 17, /*!< Reserved Interrupt */
- Reserved6_IRQn = 18, /*!< Reserved Interrupt */
- Reserved7_IRQn = 19, /*!< Reserved Interrupt */
- Reserved8_IRQn = 20, /*!< Reserved Interrupt */
- Reserved9_IRQn = 21, /*!< Reserved Interrupt */
- Reserved10_IRQn = 22, /*!< Reserved Interrupt */
- Reserved11_IRQn = 23, /*!< Reserved Interrupt */
- PININT0_IRQn = 24, /*!< External Interrupt 0 */
- PININT1_IRQn = 25, /*!< External Interrupt 1 */
- PININT2_IRQn = 26, /*!< External Interrupt 2 */
- PININT3_IRQn = 27, /*!< External Interrupt 3 */
- PININT4_IRQn = 28, /*!< External Interrupt 4 */
- PININT5_IRQn = 29, /*!< External Interrupt 5 */
- PININT6_IRQn = 30, /*!< External Interrupt 6 */
- PININT7_IRQn = 31, /*!< External Interrupt 7 */
-} IRQn_Type;
-
-/*
- * ==========================================================================
- * ----------- Processor and Core Peripheral Section ------------------------
- * ==========================================================================
- */
-
-/* Configuration of the Cortex-M0+ Processor and Core Peripherals */
-#define __MPU_PRESENT 0 /*!< MPU present or not */
-#define __VTOR_PRESENT 1 /**< Defines if an VTOR is present or not */
-#define __NVIC_PRIO_BITS 2 /*!< Number of Bits used for Priority Levels */
-#define __Vendor_SysTickConfig 0 /*!< Set to 1 if different SysTick Config is used */
-
-/*@}*/ /* end of group LPC8xx_CMSIS */
-
-
-#include "core_cm0plus.h" /* Cortex-M0+ processor and core peripherals */
-#include "system_LPC8xx.h" /* System Header */
-
-
-/******************************************************************************/
-/* Device Specific Peripheral Registers structures */
-/******************************************************************************/
-
-#if defined ( __CC_ARM )
-#pragma anon_unions
-#endif
-
-/*------------- System Control (SYSCON) --------------------------------------*/
-/** @addtogroup LPC8xx_SYSCON LPC8xx System Control Block
- @{
-*/
-typedef struct
-{
- __IO uint32_t SYSMEMREMAP; /*!< Offset: 0x000 System memory remap (R/W) */
- __IO uint32_t PRESETCTRL; /*!< Offset: 0x004 Peripheral reset control (R/W) */
- __IO uint32_t SYSPLLCTRL; /*!< Offset: 0x008 System PLL control (R/W) */
- __IO uint32_t SYSPLLSTAT; /*!< Offset: 0x00C System PLL status (R/W ) */
- uint32_t RESERVED0[4];
-
- __IO uint32_t SYSOSCCTRL; /*!< Offset: 0x020 System oscillator control (R/W) */
- __IO uint32_t WDTOSCCTRL; /*!< Offset: 0x024 Watchdog oscillator control (R/W) */
- uint32_t RESERVED1[2];
- __IO uint32_t SYSRSTSTAT; /*!< Offset: 0x030 System reset status Register (R/W ) */
- uint32_t RESERVED2[3];
- __IO uint32_t SYSPLLCLKSEL; /*!< Offset: 0x040 System PLL clock source select (R/W) */
- __IO uint32_t SYSPLLCLKUEN; /*!< Offset: 0x044 System PLL clock source update enable (R/W) */
- uint32_t RESERVED3[10];
-
- __IO uint32_t MAINCLKSEL; /*!< Offset: 0x070 Main clock source select (R/W) */
- __IO uint32_t MAINCLKUEN; /*!< Offset: 0x074 Main clock source update enable (R/W) */
- __IO uint32_t SYSAHBCLKDIV; /*!< Offset: 0x078 System AHB clock divider (R/W) */
- uint32_t RESERVED4[1];
-
- __IO uint32_t SYSAHBCLKCTRL; /*!< Offset: 0x080 System AHB clock control (R/W) */
- uint32_t RESERVED5[4];
- __IO uint32_t UARTCLKDIV; /*!< Offset: 0x094 UART clock divider (R/W) */
- uint32_t RESERVED6[18];
-
- __IO uint32_t CLKOUTSEL; /*!< Offset: 0x0E0 CLKOUT clock source select (R/W) */
- __IO uint32_t CLKOUTUEN; /*!< Offset: 0x0E4 CLKOUT clock source update enable (R/W) */
- __IO uint32_t CLKOUTDIV; /*!< Offset: 0x0E8 CLKOUT clock divider (R/W) */
- uint32_t RESERVED7;
- __IO uint32_t UARTFRGDIV; /*!< Offset: 0x0F0 UART fractional divider SUB(R/W) */
- __IO uint32_t UARTFRGMULT; /*!< Offset: 0x0F4 UART fractional divider ADD(R/W) */
- uint32_t RESERVED8[1];
- __IO uint32_t EXTTRACECMD; /*!< (@ 0x400480FC) External trace buffer command register */
- __IO uint32_t PIOPORCAP0; /*!< Offset: 0x100 POR captured PIO status 0 (R/ ) */
- uint32_t RESERVED9[12];
- __IO uint32_t IOCONCLKDIV[7]; /*!< (@0x40048134-14C) Peripheral clock x to the IOCON block for programmable glitch filter */
- __IO uint32_t BODCTRL; /*!< Offset: 0x150 BOD control (R/W) */
- __IO uint32_t SYSTCKCAL; /*!< Offset: 0x154 System tick counter calibration (R/W) */
- uint32_t RESERVED10[6];
- __IO uint32_t IRQLATENCY; /*!< (@ 0x40048170) IRQ delay */
- __IO uint32_t NMISRC; /*!< (@ 0x40048174) NMI Source Control */
- __IO uint32_t PINTSEL[8]; /*!< (@ 0x40048178) GPIO Pin Interrupt Select register 0 */
- uint32_t RESERVED11[27];
- __IO uint32_t STARTERP0; /*!< Offset: 0x204 Start logic signal enable Register 0 (R/W) */
- uint32_t RESERVED12[3];
- __IO uint32_t STARTERP1; /*!< Offset: 0x214 Start logic signal enable Register 0 (R/W) */
- uint32_t RESERVED13[6];
- __IO uint32_t PDSLEEPCFG; /*!< Offset: 0x230 Power-down states in Deep-sleep mode (R/W) */
- __IO uint32_t PDAWAKECFG; /*!< Offset: 0x234 Power-down states after wake-up (R/W) */
- __IO uint32_t PDRUNCFG; /*!< Offset: 0x238 Power-down configuration Register (R/W) */
- uint32_t RESERVED14[110];
- __I uint32_t DEVICE_ID; /*!< Offset: 0x3F4 Device ID (R/ ) */
-} LPC_SYSCON_TypeDef;
-/*@}*/ /* end of group LPC8xx_SYSCON */
-
-
-/**
- * @brief Product name title=UM10462 Chapter title=LPC8xx I/O configuration Modification date=3/16/2011 Major revision=0 Minor revision=3 (IOCONFIG)
- */
-
-typedef struct { /*!< (@ 0x40044000) IOCONFIG Structure */
- __IO uint32_t PIO0_17; /*!< (@ 0x40044000) I/O configuration for pin PIO0_17 */
- __IO uint32_t PIO0_13; /*!< (@ 0x40044004) I/O configuration for pin PIO0_13 */
- __IO uint32_t PIO0_12; /*!< (@ 0x40044008) I/O configuration for pin PIO0_12 */
- __IO uint32_t PIO0_5; /*!< (@ 0x4004400C) I/O configuration for pin PIO0_5 */
- __IO uint32_t PIO0_4; /*!< (@ 0x40044010) I/O configuration for pin PIO0_4 */
- __IO uint32_t PIO0_3; /*!< (@ 0x40044014) I/O configuration for pin PIO0_3 */
- __IO uint32_t PIO0_2; /*!< (@ 0x40044018) I/O configuration for pin PIO0_2 */
- __IO uint32_t PIO0_11; /*!< (@ 0x4004401C) I/O configuration for pin PIO0_11 */
- __IO uint32_t PIO0_10; /*!< (@ 0x40044020) I/O configuration for pin PIO0_10 */
- __IO uint32_t PIO0_16; /*!< (@ 0x40044024) I/O configuration for pin PIO0_16 */
- __IO uint32_t PIO0_15; /*!< (@ 0x40044028) I/O configuration for pin PIO0_15 */
- __IO uint32_t PIO0_1; /*!< (@ 0x4004402C) I/O configuration for pin PIO0_1 */
- __IO uint32_t Reserved; /*!< (@ 0x40044030) I/O configuration for pin (Reserved) */
- __IO uint32_t PIO0_9; /*!< (@ 0x40044034) I/O configuration for pin PIO0_9 */
- __IO uint32_t PIO0_8; /*!< (@ 0x40044038) I/O configuration for pin PIO0_8 */
- __IO uint32_t PIO0_7; /*!< (@ 0x4004403C) I/O configuration for pin PIO0_7 */
- __IO uint32_t PIO0_6; /*!< (@ 0x40044040) I/O configuration for pin PIO0_6 */
- __IO uint32_t PIO0_0; /*!< (@ 0x40044044) I/O configuration for pin PIO0_0 */
- __IO uint32_t PIO0_14; /*!< (@ 0x40044048) I/O configuration for pin PIO0_14 */
-} LPC_IOCON_TypeDef;
-/*@}*/ /* end of group LPC8xx_IOCON */
-
-/**
- * @brief Product name title=UM10462 Chapter title=LPC8xx Flash programming firmware Major revision=0 Minor revision=3 (FLASHCTRL)
- */
-typedef struct { /*!< (@ 0x40040000) FLASHCTRL Structure */
- __I uint32_t RESERVED0[4];
- __IO uint32_t FLASHCFG; /*!< (@ 0x40040010) Flash configuration register */
- __I uint32_t RESERVED1[3];
- __IO uint32_t FMSSTART; /*!< (@ 0x40040020) Signature start address register */
- __IO uint32_t FMSSTOP; /*!< (@ 0x40040024) Signature stop-address register */
- __I uint32_t RESERVED2;
- __I uint32_t FMSW0;
-} LPC_FLASHCTRL_TypeDef;
-/*@}*/ /* end of group LPC8xx_FLASHCTRL */
-
-
-/*------------- Power Management Unit (PMU) --------------------------*/
-/** @addtogroup LPC8xx_PMU LPC8xx Power Management Unit
- @{
-*/
-typedef struct
-{
- __IO uint32_t PCON; /*!< Offset: 0x000 Power control Register (R/W) */
- __IO uint32_t GPREG0; /*!< Offset: 0x004 General purpose Register 0 (R/W) */
- __IO uint32_t GPREG1; /*!< Offset: 0x008 General purpose Register 1 (R/W) */
- __IO uint32_t GPREG2; /*!< Offset: 0x00C General purpose Register 2 (R/W) */
- __IO uint32_t GPREG3; /*!< Offset: 0x010 General purpose Register 3 (R/W) */
- __IO uint32_t DPDCTRL; /*!< Offset: 0x014 Deep power-down control register (R/W) */
-} LPC_PMU_TypeDef;
-/*@}*/ /* end of group LPC8xx_PMU */
-
-
-/*------------- Switch Matrix Port --------------------------*/
-/** @addtogroup LPC8xx_SWM LPC8xx Switch Matrix Port
- @{
-*/
-typedef struct
-{
- union {
- __IO uint32_t PINASSIGN[9];
- struct {
- __IO uint32_t PINASSIGN0;
- __IO uint32_t PINASSIGN1;
- __IO uint32_t PINASSIGN2;
- __IO uint32_t PINASSIGN3;
- __IO uint32_t PINASSIGN4;
- __IO uint32_t PINASSIGN5;
- __IO uint32_t PINASSIGN6;
- __IO uint32_t PINASSIGN7;
- __IO uint32_t PINASSIGN8;
- };
- };
- __I uint32_t RESERVED0[103];
- __IO uint32_t PINENABLE0;
-} LPC_SWM_TypeDef;
-/*@}*/ /* end of group LPC8xx_SWM */
-
-
-// ------------------------------------------------------------------------------------------------
-// ----- GPIO_PORT -----
-// ------------------------------------------------------------------------------------------------
-
-/**
- * @brief Product name title=UM10462 Chapter title=LPC8xx GPIO Modification date=3/17/2011 Major revision=0 Minor revision=3 (GPIO_PORT)
- */
-
-typedef struct {
- __IO uint8_t B0[18]; /*!< (@ 0xA0000000) Byte pin registers port 0 */
- __I uint16_t RESERVED0[2039];
- __IO uint32_t W0[18]; /*!< (@ 0xA0001000) Word pin registers port 0 */
- uint32_t RESERVED1[1006];
- __IO uint32_t DIR0; /* 0x2000 */
- uint32_t RESERVED2[31];
- __IO uint32_t MASK0; /* 0x2080 */
- uint32_t RESERVED3[31];
- __IO uint32_t PIN0; /* 0x2100 */
- uint32_t RESERVED4[31];
- __IO uint32_t MPIN0; /* 0x2180 */
- uint32_t RESERVED5[31];
- __IO uint32_t SET0; /* 0x2200 */
- uint32_t RESERVED6[31];
- __O uint32_t CLR0; /* 0x2280 */
- uint32_t RESERVED7[31];
- __O uint32_t NOT0; /* 0x2300 */
-
-} LPC_GPIO_PORT_TypeDef;
-
-
-// ------------------------------------------------------------------------------------------------
-// ----- PIN_INT -----
-// ------------------------------------------------------------------------------------------------
-
-/**
- * @brief Product name title=UM10462 Chapter title=LPC8xx GPIO Modification date=3/17/2011 Major revision=0 Minor revision=3 (PIN_INT)
- */
-
-typedef struct { /*!< (@ 0xA0004000) PIN_INT Structure */
- __IO uint32_t ISEL; /*!< (@ 0xA0004000) Pin Interrupt Mode register */
- __IO uint32_t IENR; /*!< (@ 0xA0004004) Pin Interrupt Enable (Rising) register */
- __IO uint32_t SIENR; /*!< (@ 0xA0004008) Set Pin Interrupt Enable (Rising) register */
- __IO uint32_t CIENR; /*!< (@ 0xA000400C) Clear Pin Interrupt Enable (Rising) register */
- __IO uint32_t IENF; /*!< (@ 0xA0004010) Pin Interrupt Enable Falling Edge / Active Level register */
- __IO uint32_t SIENF; /*!< (@ 0xA0004014) Set Pin Interrupt Enable Falling Edge / Active Level register */
- __IO uint32_t CIENF; /*!< (@ 0xA0004018) Clear Pin Interrupt Enable Falling Edge / Active Level address */
- __IO uint32_t RISE; /*!< (@ 0xA000401C) Pin Interrupt Rising Edge register */
- __IO uint32_t FALL; /*!< (@ 0xA0004020) Pin Interrupt Falling Edge register */
- __IO uint32_t IST; /*!< (@ 0xA0004024) Pin Interrupt Status register */
- __IO uint32_t PMCTRL; /*!< (@ 0xA0004028) GPIO pattern match interrupt control register */
- __IO uint32_t PMSRC; /*!< (@ 0xA000402C) GPIO pattern match interrupt bit-slice source register */
- __IO uint32_t PMCFG; /*!< (@ 0xA0004030) GPIO pattern match interrupt bit slice configuration register */
-} LPC_PIN_INT_TypeDef;
-
-
-/*------------- CRC Engine (CRC) -----------------------------------------*/
-/** @addtogroup LPC8xx_CRC
- @{
-*/
-typedef struct
-{
- __IO uint32_t MODE;
- __IO uint32_t SEED;
- union {
- __I uint32_t SUM;
- __O uint32_t WR_DATA_DWORD;
- __O uint16_t WR_DATA_WORD;
- uint16_t RESERVED_WORD;
- __O uint8_t WR_DATA_BYTE;
- uint8_t RESERVED_BYTE[3];
- };
-} LPC_CRC_TypeDef;
-/*@}*/ /* end of group LPC8xx_CRC */
-
-/*------------- Comparator (CMP) --------------------------------------------------*/
-/** @addtogroup LPC8xx_CMP LPC8xx Comparator
- @{
-*/
-typedef struct { /*!< (@ 0x40024000) CMP Structure */
- __IO uint32_t CTRL; /*!< (@ 0x40024000) Comparator control register */
- __IO uint32_t LAD; /*!< (@ 0x40024004) Voltage ladder register */
-} LPC_CMP_TypeDef;
-/*@}*/ /* end of group LPC8xx_CMP */
-
-
-/*------------- Wakeup Timer (WKT) --------------------------------------------------*/
-/** @addtogroup LPC8xx_WKT
- @{
-*/
-typedef struct { /*!< (@ 0x40028000) WKT Structure */
- __IO uint32_t CTRL; /*!< (@ 0x40028000) Alarm/Wakeup Timer Control register */
- uint32_t Reserved[2];
- __IO uint32_t COUNT; /*!< (@ 0x4002800C) Alarm/Wakeup TImer counter register */
-} LPC_WKT_TypeDef;
-/*@}*/ /* end of group LPC8xx_WKT */
-
-/*------------- Multi-Rate Timer(MRT) --------------------------------------------------*/
-//New, Copied from lpc824
-/**
- * @brief Multi-Rate Timer (MRT) (MRT)
- */
-typedef struct { /*!< (@ 0x40004000) MRT Structure */
- __IO uint32_t INTVAL0; /*!< (@ 0x40004000) MRT0 Time interval value register. This value
- is loaded into the TIMER0 register. */
- __I uint32_t TIMER0; /*!< (@ 0x40004004) MRT0 Timer register. This register reads the
- value of the down-counter. */
- __IO uint32_t CTRL0; /*!< (@ 0x40004008) MRT0 Control register. This register controls
- the MRT0 modes. */
- __IO uint32_t STAT0; /*!< (@ 0x4000400C) MRT0 Status register. */
- __IO uint32_t INTVAL1; /*!< (@ 0x40004010) MRT0 Time interval value register. This value
- is loaded into the TIMER0 register. */
- __I uint32_t TIMER1; /*!< (@ 0x40004014) MRT0 Timer register. This register reads the
- value of the down-counter. */
- __IO uint32_t CTRL1; /*!< (@ 0x40004018) MRT0 Control register. This register controls
- the MRT0 modes. */
- __IO uint32_t STAT1; /*!< (@ 0x4000401C) MRT0 Status register. */
- __IO uint32_t INTVAL2; /*!< (@ 0x40004020) MRT0 Time interval value register. This value
- is loaded into the TIMER0 register. */
- __I uint32_t TIMER2; /*!< (@ 0x40004024) MRT0 Timer register. This register reads the
- value of the down-counter. */
- __IO uint32_t CTRL2; /*!< (@ 0x40004028) MRT0 Control register. This register controls
- the MRT0 modes. */
- __IO uint32_t STAT2; /*!< (@ 0x4000402C) MRT0 Status register. */
- __IO uint32_t INTVAL3; /*!< (@ 0x40004030) MRT0 Time interval value register. This value
- is loaded into the TIMER0 register. */
- __I uint32_t TIMER3; /*!< (@ 0x40004034) MRT0 Timer register. This register reads the
- value of the down-counter. */
- __IO uint32_t CTRL3; /*!< (@ 0x40004038) MRT0 Control register. This register controls
- the MRT0 modes. */
- __IO uint32_t STAT3; /*!< (@ 0x4000403C) MRT0 Status register. */
- __I uint32_t RESERVED0[45];
- __I uint32_t IDLE_CH; /*!< (@ 0x400040F4) Idle channel register. This register returns
- the number of the first idle channel. */
- __IO uint32_t IRQ_FLAG; /*!< (@ 0x400040F8) Global interrupt flag register */
-} LPC_MRT_TypeDef;
-
-/*------------- Universal Asynchronous Receiver Transmitter (USART) -----------*/
-/** @addtogroup LPC8xx_UART LPC8xx Universal Asynchronous Receiver/Transmitter
- @{
-*/
-/**
- * @brief Product name title=LPC8xx MCU Chapter title=USART Modification date=4/18/2012 Major revision=0 Minor revision=9 (USART)
- */
-typedef struct
-{
- __IO uint32_t CFG; /* 0x00 */
- __IO uint32_t CTRL;
- __IO uint32_t STAT;
- __IO uint32_t INTENSET;
- __O uint32_t INTENCLR; /* 0x10 */
- __I uint32_t RXDATA;
- __I uint32_t RXDATA_STAT;
- __IO uint32_t TXDATA;
- __IO uint32_t BRG; /* 0x20 */
- __IO uint32_t INTSTAT;
-} LPC_USART_TypeDef;
-
-/*@}*/ /* end of group LPC8xx_USART */
-
-
-/*------------- Synchronous Serial Interface Controller (SPI) -----------------------*/
-/** @addtogroup LPC8xx_SPI LPC8xx Synchronous Serial Port
- @{
-*/
-typedef struct
-{
- __IO uint32_t CFG; /* 0x00 */
- __IO uint32_t DLY;
- __IO uint32_t STAT;
- __IO uint32_t INTENSET;
- __O uint32_t INTENCLR; /* 0x10 */
- __I uint32_t RXDAT;
- __IO uint32_t TXDATCTL;
- __IO uint32_t TXDAT;
- __IO uint32_t TXCTRL; /* 0x20 */
- __IO uint32_t DIV;
- __I uint32_t INTSTAT;
-} LPC_SPI_TypeDef;
-/*@}*/ /* end of group LPC8xx_SPI */
-
-
-/*------------- Inter-Integrated Circuit (I2C) -------------------------------*/
-/** @addtogroup LPC8xx_I2C I2C-Bus Interface
- @{
-*/
-typedef struct
-{
- __IO uint32_t CFG; /* 0x00 */
- __IO uint32_t STAT;
- __IO uint32_t INTENSET;
- __O uint32_t INTENCLR;
- __IO uint32_t TIMEOUT; /* 0x10 */
- __IO uint32_t DIV;
- __IO uint32_t INTSTAT;
- uint32_t Reserved0[1];
- __IO uint32_t MSTCTL; /* 0x20 */
- __IO uint32_t MSTTIME;
- __IO uint32_t MSTDAT;
- uint32_t Reserved1[5];
- __IO uint32_t SLVCTL; /* 0x40 */
- __IO uint32_t SLVDAT;
- __IO uint32_t SLVADR0;
- __IO uint32_t SLVADR1;
- __IO uint32_t SLVADR2; /* 0x50 */
- __IO uint32_t SLVADR3;
- __IO uint32_t SLVQUAL0;
- uint32_t Reserved2[9];
- __I uint32_t MONRXDAT; /* 0x80 */
-} LPC_I2C_TypeDef;
-
-/*@}*/ /* end of group LPC8xx_I2C */
-
-/**
- * @brief State Configurable Timer (SCT) (SCT)
- */
-
-/**
- * @brief Product name title=UM10430 Chapter title=LPC8xx State Configurable Timer (SCT) Modification date=1/18/2011 Major revision=0 Minor revision=7 (SCT)
- */
-
-#define CONFIG_SCT_nEV (6) /* Number of events */
-#define CONFIG_SCT_nRG (5) /* Number of match/compare registers */
-#define CONFIG_SCT_nOU (4) /* Number of outputs */
-
-typedef struct
-{
- __IO uint32_t CONFIG; /* 0x000 Configuration Register */
- union {
- __IO uint32_t CTRL_U; /* 0x004 Control Register */
- struct {
- __IO uint16_t CTRL_L; /* 0x004 low control register */
- __IO uint16_t CTRL_H; /* 0x006 high control register */
- };
- };
- __IO uint16_t LIMIT_L; /* 0x008 limit register for counter L */
- __IO uint16_t LIMIT_H; /* 0x00A limit register for counter H */
- __IO uint16_t HALT_L; /* 0x00C halt register for counter L */
- __IO uint16_t HALT_H; /* 0x00E halt register for counter H */
- __IO uint16_t STOP_L; /* 0x010 stop register for counter L */
- __IO uint16_t STOP_H; /* 0x012 stop register for counter H */
- __IO uint16_t START_L; /* 0x014 start register for counter L */
- __IO uint16_t START_H; /* 0x016 start register for counter H */
- uint32_t RESERVED1[10]; /* 0x018-0x03C reserved */
- union {
- __IO uint32_t COUNT_U; /* 0x040 counter register */
- struct {
- __IO uint16_t COUNT_L; /* 0x040 counter register for counter L */
- __IO uint16_t COUNT_H; /* 0x042 counter register for counter H */
- };
- };
- __IO uint16_t STATE_L; /* 0x044 state register for counter L */
- __IO uint16_t STATE_H; /* 0x046 state register for counter H */
- __I uint32_t INPUT; /* 0x048 input register */
- __IO uint16_t REGMODE_L; /* 0x04C match - capture registers mode register L */
- __IO uint16_t REGMODE_H; /* 0x04E match - capture registers mode register H */
- __IO uint32_t OUTPUT; /* 0x050 output register */
- __IO uint32_t OUTPUTDIRCTRL; /* 0x054 Output counter direction Control Register */
- __IO uint32_t RES; /* 0x058 conflict resolution register */
- uint32_t RESERVED2[37]; /* 0x05C-0x0EC reserved */
- __IO uint32_t EVEN; /* 0x0F0 event enable register */
- __IO uint32_t EVFLAG; /* 0x0F4 event flag register */
- __IO uint32_t CONEN; /* 0x0F8 conflict enable register */
- __IO uint32_t CONFLAG; /* 0x0FC conflict flag register */
-
- union {
- __IO union { /* 0x100-... Match / Capture value */
- uint32_t U; /* SCTMATCH[i].U Unified 32-bit register */
- struct {
- uint16_t L; /* SCTMATCH[i].L Access to L value */
- uint16_t H; /* SCTMATCH[i].H Access to H value */
- };
- } MATCH[CONFIG_SCT_nRG];
- __I union {
- uint32_t U; /* SCTCAP[i].U Unified 32-bit register */
- struct {
- uint16_t L; /* SCTCAP[i].L Access to H value */
- uint16_t H; /* SCTCAP[i].H Access to H value */
- };
- } CAP[CONFIG_SCT_nRG];
- };
-
-
- uint32_t RESERVED3[32-CONFIG_SCT_nRG]; /* ...-0x17C reserved */
-
- union {
- __IO uint16_t MATCH_L[CONFIG_SCT_nRG]; /* 0x180-... Match Value L counter */
- __I uint16_t CAP_L[CONFIG_SCT_nRG]; /* 0x180-... Capture Value L counter */
- };
- uint16_t RESERVED4[32-CONFIG_SCT_nRG]; /* ...-0x1BE reserved */
- union {
- __IO uint16_t MATCH_H[CONFIG_SCT_nRG]; /* 0x1C0-... Match Value H counter */
- __I uint16_t CAP_H[CONFIG_SCT_nRG]; /* 0x1C0-... Capture Value H counter */
- };
-
- uint16_t RESERVED5[32-CONFIG_SCT_nRG]; /* ...-0x1FE reserved */
-
-
- union {
- __IO union { /* 0x200-... Match Reload / Capture Control value */
- uint32_t U; /* SCTMATCHREL[i].U Unified 32-bit register */
- struct {
- uint16_t L; /* SCTMATCHREL[i].L Access to L value */
- uint16_t H; /* SCTMATCHREL[i].H Access to H value */
- };
- } MATCHREL[CONFIG_SCT_nRG];
- __IO union {
- uint32_t U; /* SCTCAPCTRL[i].U Unified 32-bit register */
- struct {
- uint16_t L; /* SCTCAPCTRL[i].L Access to H value */
- uint16_t H; /* SCTCAPCTRL[i].H Access to H value */
- };
- } CAPCTRL[CONFIG_SCT_nRG];
- };
-
- uint32_t RESERVED6[32-CONFIG_SCT_nRG]; /* ...-0x27C reserved */
-
- union {
- __IO uint16_t MATCHREL_L[CONFIG_SCT_nRG]; /* 0x280-... Match Reload value L counter */
- __IO uint16_t CAPCTRL_L[CONFIG_SCT_nRG]; /* 0x280-... Capture Control value L counter */
- };
- uint16_t RESERVED7[32-CONFIG_SCT_nRG]; /* ...-0x2BE reserved */
- union {
- __IO uint16_t MATCHREL_H[CONFIG_SCT_nRG]; /* 0x2C0-... Match Reload value H counter */
- __IO uint16_t CAPCTRL_H[CONFIG_SCT_nRG]; /* 0x2C0-... Capture Control value H counter */
- };
- uint16_t RESERVED8[32-CONFIG_SCT_nRG]; /* ...-0x2FE reserved */
-
- __IO struct { /* 0x300-0x3FC SCTEVENT[i].STATE / SCTEVENT[i].CTRL*/
- uint32_t STATE; /* Event State Register */
- uint32_t CTRL; /* Event Control Register */
- } EVENT[CONFIG_SCT_nEV];
-
- uint32_t RESERVED9[128-2*CONFIG_SCT_nEV]; /* ...-0x4FC reserved */
-
- __IO struct { /* 0x500-0x57C SCTOUT[i].SET / SCTOUT[i].CLR */
- uint32_t SET; /* Output n Set Register */
- uint32_t CLR; /* Output n Clear Register */
- } OUT[CONFIG_SCT_nOU];
-
- uint32_t RESERVED10[191-2*CONFIG_SCT_nOU]; /* ...-0x7F8 reserved */
-
- __I uint32_t MODULECONTENT; /* 0x7FC Module Content */
-
-} LPC_SCT_TypeDef;
-/*@}*/ /* end of group LPC8xx_SCT */
-
-
-/*------------- Watchdog Timer (WWDT) -----------------------------------------*/
-/** @addtogroup LPC8xx_WDT LPC8xx WatchDog Timer
- @{
-*/
-typedef struct
-{
- __IO uint32_t MOD; /*!< Offset: 0x000 Watchdog mode register (R/W) */
- __IO uint32_t TC; /*!< Offset: 0x004 Watchdog timer constant register (R/W) */
- __O uint32_t FEED; /*!< Offset: 0x008 Watchdog feed sequence register (W) */
- __I uint32_t TV; /*!< Offset: 0x00C Watchdog timer value register (R) */
- uint32_t RESERVED; /*!< Offset: 0x010 RESERVED */
- __IO uint32_t WARNINT; /*!< Offset: 0x014 Watchdog timer warning int. register (R/W) */
- __IO uint32_t WINDOW; /*!< Offset: 0x018 Watchdog timer window value register (R/W) */
-} LPC_WWDT_TypeDef;
-/*@}*/ /* end of group LPC8xx_WDT */
-
-
-#if defined ( __CC_ARM )
-#pragma no_anon_unions
-#endif
-
-/******************************************************************************/
-/* Peripheral memory map */
-/******************************************************************************/
-/* Base addresses */
-#define LPC_FLASH_BASE (0x00000000UL)
-#define LPC_RAM_BASE (0x10000000UL)
-#define LPC_ROM_BASE (0x1FFF0000UL)
-#define LPC_APB0_BASE (0x40000000UL)
-#define LPC_AHB_BASE (0x50000000UL)
-
-/* APB0 peripherals */
-#define LPC_WWDT_BASE (LPC_APB0_BASE + 0x00000)
-#define LPC_MRT_BASE (LPC_APB0_BASE + 0x04000)
-#define LPC_WKT_BASE (LPC_APB0_BASE + 0x08000)
-#define LPC_SWM_BASE (LPC_APB0_BASE + 0x0C000)
-#define LPC_PMU_BASE (LPC_APB0_BASE + 0x20000)
-#define LPC_CMP_BASE (LPC_APB0_BASE + 0x24000)
-
-#define LPC_FLASHCTRL_BASE (LPC_APB0_BASE + 0x40000)
-#define LPC_IOCON_BASE (LPC_APB0_BASE + 0x44000)
-#define LPC_SYSCON_BASE (LPC_APB0_BASE + 0x48000)
-#define LPC_I2C_BASE (LPC_APB0_BASE + 0x50000)
-#define LPC_SPI0_BASE (LPC_APB0_BASE + 0x58000)
-#define LPC_SPI1_BASE (LPC_APB0_BASE + 0x5C000)
-#define LPC_USART0_BASE (LPC_APB0_BASE + 0x64000)
-#define LPC_USART1_BASE (LPC_APB0_BASE + 0x68000)
-#define LPC_USART2_BASE (LPC_APB0_BASE + 0x6C000)
-
-/* AHB peripherals */
-#define LPC_CRC_BASE (LPC_AHB_BASE + 0x00000)
-#define LPC_SCT_BASE (LPC_AHB_BASE + 0x04000)
-
-#define LPC_GPIO_PORT_BASE (0xA0000000)
-#define LPC_PIN_INT_BASE (LPC_GPIO_PORT_BASE + 0x4000)
-
-/******************************************************************************/
-/* Peripheral declaration */
-/******************************************************************************/
-#define LPC_WWDT ((LPC_WWDT_TypeDef *) LPC_WWDT_BASE )
-#define LPC_MRT ((LPC_MRT_TypeDef *) LPC_MRT_BASE )
-
-
-#define LPC_WKT ((LPC_WKT_TypeDef *) LPC_WKT_BASE )
-#define LPC_SWM ((LPC_SWM_TypeDef *) LPC_SWM_BASE )
-#define LPC_PMU ((LPC_PMU_TypeDef *) LPC_PMU_BASE )
-#define LPC_CMP ((LPC_CMP_TypeDef *) LPC_CMP_BASE )
-
-#define LPC_FLASHCTRL ((LPC_FLASHCTRL_TypeDef *) LPC_FLASHCTRL_BASE )
-#define LPC_IOCON ((LPC_IOCON_TypeDef *) LPC_IOCON_BASE )
-#define LPC_SYSCON ((LPC_SYSCON_TypeDef *) LPC_SYSCON_BASE)
-#define LPC_I2C ((LPC_I2C_TypeDef *) LPC_I2C_BASE )
-#define LPC_SPI0 ((LPC_SPI_TypeDef *) LPC_SPI0_BASE )
-#define LPC_SPI1 ((LPC_SPI_TypeDef *) LPC_SPI1_BASE )
-#define LPC_USART0 ((LPC_USART_TypeDef *) LPC_USART0_BASE )
-#define LPC_USART1 ((LPC_USART_TypeDef *) LPC_USART1_BASE )
-#define LPC_USART2 ((LPC_USART_TypeDef *) LPC_USART2_BASE )
-
-#define LPC_CRC ((LPC_CRC_TypeDef *) LPC_CRC_BASE )
-#define LPC_SCT ((LPC_SCT_TypeDef *) LPC_SCT_BASE )
-
-#define LPC_GPIO_PORT ((LPC_GPIO_PORT_TypeDef *) LPC_GPIO_PORT_BASE )
-#define LPC_PIN_INT ((LPC_PIN_INT_TypeDef *) LPC_PIN_INT_BASE )
-
-#ifdef __cplusplus
-}
-#endif
-
-#endif /* __LPC8xx_H__ */
+/****************************************************************************
+ * $Id:: LPC8xx.h 6437 2012-10-31 11:06:06Z dep00694 $
+ * Project: NXP LPC8xx software example
+ *
+ * Description:
+ * CMSIS Cortex-M0+ Core Peripheral Access Layer Header File for
+ * NXP LPC800 Device Series
+ *
+ ****************************************************************************
+ * Software that is described herein is for illustrative purposes only
+ * which provides customers with programming information regarding the
+ * products. This software is supplied "AS IS" without any warranties.
+ * NXP Semiconductors assumes no responsibility or liability for the
+ * use of the software, conveys no license or title under any patent,
+ * copyright, or mask work right to the product. NXP Semiconductors
+ * reserves the right to make changes in the software without
+ * notification. NXP Semiconductors also make no representation or
+ * warranty that such application will be suitable for the specified
+ * use without further testing or modification.
+
+ * Permission to use, copy, modify, and distribute this software and its
+ * documentation is hereby granted, under NXP Semiconductors'
+ * relevant copyright in the software, without fee, provided that it
+ * is used in conjunction with NXP Semiconductors microcontrollers. This
+ * copyright, permission, and disclaimer notice must appear in all copies of
+ * this code.
+****************************************************************************/
+#ifndef __LPC8xx_H__
+#define __LPC8xx_H__
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/** @addtogroup LPC8xx_Definitions LPC8xx Definitions
+ This file defines all structures and symbols for LPC8xx:
+ - Registers and bitfields
+ - peripheral base address
+ - PIO definitions
+ @{
+*/
+
+
+/******************************************************************************/
+/* Processor and Core Peripherals */
+/******************************************************************************/
+/** @addtogroup LPC8xx_CMSIS LPC8xx CMSIS Definitions
+ Configuration of the Cortex-M0+ Processor and Core Peripherals
+ @{
+*/
+
+/*
+ * ==========================================================================
+ * ---------- Interrupt Number Definition -----------------------------------
+ * ==========================================================================
+ */
+typedef enum IRQn
+{
+/****** Cortex-M0 Processor Exceptions Numbers ***************************************************/
+ Reset_IRQn = -15, /*!< 1 Reset Vector, invoked on Power up and warm reset*/
+ NonMaskableInt_IRQn = -14, /*!< 2 Non Maskable Interrupt */
+ HardFault_IRQn = -13, /*!< 3 Cortex-M0 Hard Fault Interrupt */
+ SVCall_IRQn = -5, /*!< 11 Cortex-M0 SV Call Interrupt */
+ PendSV_IRQn = -2, /*!< 14 Cortex-M0 Pend SV Interrupt */
+ SysTick_IRQn = -1, /*!< 15 Cortex-M0 System Tick Interrupt */
+
+/****** LPC8xx Specific Interrupt Numbers ********************************************************/
+ SPI0_IRQn = 0, /*!< SPI0 */
+ SPI1_IRQn = 1, /*!< SPI1 */
+ Reserved0_IRQn = 2, /*!< Reserved Interrupt */
+ UART0_IRQn = 3, /*!< USART0 */
+ UART1_IRQn = 4, /*!< USART1 */
+ UART2_IRQn = 5, /*!< USART2 */
+ Reserved1_IRQn = 6, /*!< Reserved Interrupt */
+ Reserved2_IRQn = 7, /*!< Reserved Interrupt */
+ I2C_IRQn = 8, /*!< I2C */
+ SCT_IRQn = 9, /*!< SCT */
+ MRT_IRQn = 10, /*!< MRT */
+ CMP_IRQn = 11, /*!< CMP */
+ WDT_IRQn = 12, /*!< WDT */
+ BOD_IRQn = 13, /*!< BOD */
+ Reserved3_IRQn = 14, /*!< Reserved Interrupt */
+ WKT_IRQn = 15, /*!< WKT Interrupt */
+ Reserved4_IRQn = 16, /*!< Reserved Interrupt */
+ Reserved5_IRQn = 17, /*!< Reserved Interrupt */
+ Reserved6_IRQn = 18, /*!< Reserved Interrupt */
+ Reserved7_IRQn = 19, /*!< Reserved Interrupt */
+ Reserved8_IRQn = 20, /*!< Reserved Interrupt */
+ Reserved9_IRQn = 21, /*!< Reserved Interrupt */
+ Reserved10_IRQn = 22, /*!< Reserved Interrupt */
+ Reserved11_IRQn = 23, /*!< Reserved Interrupt */
+ PININT0_IRQn = 24, /*!< External Interrupt 0 */
+ PININT1_IRQn = 25, /*!< External Interrupt 1 */
+ PININT2_IRQn = 26, /*!< External Interrupt 2 */
+ PININT3_IRQn = 27, /*!< External Interrupt 3 */
+ PININT4_IRQn = 28, /*!< External Interrupt 4 */
+ PININT5_IRQn = 29, /*!< External Interrupt 5 */
+ PININT6_IRQn = 30, /*!< External Interrupt 6 */
+ PININT7_IRQn = 31, /*!< External Interrupt 7 */
+} IRQn_Type;
+
+/*
+ * ==========================================================================
+ * ----------- Processor and Core Peripheral Section ------------------------
+ * ==========================================================================
+ */
+
+/* Configuration of the Cortex-M0+ Processor and Core Peripherals */
+#define __MPU_PRESENT 0 /*!< MPU present or not */
+#define __VTOR_PRESENT 1 /**< Defines if an VTOR is present or not */
+#define __NVIC_PRIO_BITS 2 /*!< Number of Bits used for Priority Levels */
+#define __Vendor_SysTickConfig 0 /*!< Set to 1 if different SysTick Config is used */
+
+/*@}*/ /* end of group LPC8xx_CMSIS */
+
+
+#include "core_cm0plus.h" /* Cortex-M0+ processor and core peripherals */
+#include "system_LPC8xx.h" /* System Header */
+
+
+/******************************************************************************/
+/* Device Specific Peripheral Registers structures */
+/******************************************************************************/
+
+#if defined ( __CC_ARM )
+#pragma anon_unions
+#endif
+
+/*------------- System Control (SYSCON) --------------------------------------*/
+/** @addtogroup LPC8xx_SYSCON LPC8xx System Control Block
+ @{
+*/
+typedef struct
+{
+ __IO uint32_t SYSMEMREMAP; /*!< Offset: 0x000 System memory remap (R/W) */
+ __IO uint32_t PRESETCTRL; /*!< Offset: 0x004 Peripheral reset control (R/W) */
+ __IO uint32_t SYSPLLCTRL; /*!< Offset: 0x008 System PLL control (R/W) */
+ __IO uint32_t SYSPLLSTAT; /*!< Offset: 0x00C System PLL status (R/W ) */
+ uint32_t RESERVED0[4];
+
+ __IO uint32_t SYSOSCCTRL; /*!< Offset: 0x020 System oscillator control (R/W) */
+ __IO uint32_t WDTOSCCTRL; /*!< Offset: 0x024 Watchdog oscillator control (R/W) */
+ uint32_t RESERVED1[2];
+ __IO uint32_t SYSRSTSTAT; /*!< Offset: 0x030 System reset status Register (R/W ) */
+ uint32_t RESERVED2[3];
+ __IO uint32_t SYSPLLCLKSEL; /*!< Offset: 0x040 System PLL clock source select (R/W) */
+ __IO uint32_t SYSPLLCLKUEN; /*!< Offset: 0x044 System PLL clock source update enable (R/W) */
+ uint32_t RESERVED3[10];
+
+ __IO uint32_t MAINCLKSEL; /*!< Offset: 0x070 Main clock source select (R/W) */
+ __IO uint32_t MAINCLKUEN; /*!< Offset: 0x074 Main clock source update enable (R/W) */
+ __IO uint32_t SYSAHBCLKDIV; /*!< Offset: 0x078 System AHB clock divider (R/W) */
+ uint32_t RESERVED4[1];
+
+ __IO uint32_t SYSAHBCLKCTRL; /*!< Offset: 0x080 System AHB clock control (R/W) */
+ uint32_t RESERVED5[4];
+ __IO uint32_t UARTCLKDIV; /*!< Offset: 0x094 UART clock divider (R/W) */
+ uint32_t RESERVED6[18];
+
+ __IO uint32_t CLKOUTSEL; /*!< Offset: 0x0E0 CLKOUT clock source select (R/W) */
+ __IO uint32_t CLKOUTUEN; /*!< Offset: 0x0E4 CLKOUT clock source update enable (R/W) */
+ __IO uint32_t CLKOUTDIV; /*!< Offset: 0x0E8 CLKOUT clock divider (R/W) */
+ uint32_t RESERVED7;
+ __IO uint32_t UARTFRGDIV; /*!< Offset: 0x0F0 UART fractional divider SUB(R/W) */
+ __IO uint32_t UARTFRGMULT; /*!< Offset: 0x0F4 UART fractional divider ADD(R/W) */
+ uint32_t RESERVED8[1];
+ __IO uint32_t EXTTRACECMD; /*!< (@ 0x400480FC) External trace buffer command register */
+ __IO uint32_t PIOPORCAP0; /*!< Offset: 0x100 POR captured PIO status 0 (R/ ) */
+ uint32_t RESERVED9[12];
+ __IO uint32_t IOCONCLKDIV[7]; /*!< (@0x40048134-14C) Peripheral clock x to the IOCON block for programmable glitch filter */
+ __IO uint32_t BODCTRL; /*!< Offset: 0x150 BOD control (R/W) */
+ __IO uint32_t SYSTCKCAL; /*!< Offset: 0x154 System tick counter calibration (R/W) */
+ uint32_t RESERVED10[6];
+ __IO uint32_t IRQLATENCY; /*!< (@ 0x40048170) IRQ delay */
+ __IO uint32_t NMISRC; /*!< (@ 0x40048174) NMI Source Control */
+ __IO uint32_t PINTSEL[8]; /*!< (@ 0x40048178) GPIO Pin Interrupt Select register 0 */
+ uint32_t RESERVED11[27];
+ __IO uint32_t STARTERP0; /*!< Offset: 0x204 Start logic signal enable Register 0 (R/W) */
+ uint32_t RESERVED12[3];
+ __IO uint32_t STARTERP1; /*!< Offset: 0x214 Start logic signal enable Register 0 (R/W) */
+ uint32_t RESERVED13[6];
+ __IO uint32_t PDSLEEPCFG; /*!< Offset: 0x230 Power-down states in Deep-sleep mode (R/W) */
+ __IO uint32_t PDAWAKECFG; /*!< Offset: 0x234 Power-down states after wake-up (R/W) */
+ __IO uint32_t PDRUNCFG; /*!< Offset: 0x238 Power-down configuration Register (R/W) */
+ uint32_t RESERVED14[110];
+ __I uint32_t DEVICE_ID; /*!< Offset: 0x3F4 Device ID (R/ ) */
+} LPC_SYSCON_TypeDef;
+/*@}*/ /* end of group LPC8xx_SYSCON */
+
+
+/**
+ * @brief Product name title=UM10462 Chapter title=LPC8xx I/O configuration Modification date=3/16/2011 Major revision=0 Minor revision=3 (IOCONFIG)
+ */
+
+typedef struct { /*!< (@ 0x40044000) IOCONFIG Structure */
+ __IO uint32_t PIO0_17; /*!< (@ 0x40044000) I/O configuration for pin PIO0_17 */
+ __IO uint32_t PIO0_13; /*!< (@ 0x40044004) I/O configuration for pin PIO0_13 */
+ __IO uint32_t PIO0_12; /*!< (@ 0x40044008) I/O configuration for pin PIO0_12 */
+ __IO uint32_t PIO0_5; /*!< (@ 0x4004400C) I/O configuration for pin PIO0_5 */
+ __IO uint32_t PIO0_4; /*!< (@ 0x40044010) I/O configuration for pin PIO0_4 */
+ __IO uint32_t PIO0_3; /*!< (@ 0x40044014) I/O configuration for pin PIO0_3 */
+ __IO uint32_t PIO0_2; /*!< (@ 0x40044018) I/O configuration for pin PIO0_2 */
+ __IO uint32_t PIO0_11; /*!< (@ 0x4004401C) I/O configuration for pin PIO0_11 */
+ __IO uint32_t PIO0_10; /*!< (@ 0x40044020) I/O configuration for pin PIO0_10 */
+ __IO uint32_t PIO0_16; /*!< (@ 0x40044024) I/O configuration for pin PIO0_16 */
+ __IO uint32_t PIO0_15; /*!< (@ 0x40044028) I/O configuration for pin PIO0_15 */
+ __IO uint32_t PIO0_1; /*!< (@ 0x4004402C) I/O configuration for pin PIO0_1 */
+ __IO uint32_t Reserved; /*!< (@ 0x40044030) I/O configuration for pin (Reserved) */
+ __IO uint32_t PIO0_9; /*!< (@ 0x40044034) I/O configuration for pin PIO0_9 */
+ __IO uint32_t PIO0_8; /*!< (@ 0x40044038) I/O configuration for pin PIO0_8 */
+ __IO uint32_t PIO0_7; /*!< (@ 0x4004403C) I/O configuration for pin PIO0_7 */
+ __IO uint32_t PIO0_6; /*!< (@ 0x40044040) I/O configuration for pin PIO0_6 */
+ __IO uint32_t PIO0_0; /*!< (@ 0x40044044) I/O configuration for pin PIO0_0 */
+ __IO uint32_t PIO0_14; /*!< (@ 0x40044048) I/O configuration for pin PIO0_14 */
+} LPC_IOCON_TypeDef;
+/*@}*/ /* end of group LPC8xx_IOCON */
+
+/**
+ * @brief Product name title=UM10462 Chapter title=LPC8xx Flash programming firmware Major revision=0 Minor revision=3 (FLASHCTRL)
+ */
+typedef struct { /*!< (@ 0x40040000) FLASHCTRL Structure */
+ __I uint32_t RESERVED0[4];
+ __IO uint32_t FLASHCFG; /*!< (@ 0x40040010) Flash configuration register */
+ __I uint32_t RESERVED1[3];
+ __IO uint32_t FMSSTART; /*!< (@ 0x40040020) Signature start address register */
+ __IO uint32_t FMSSTOP; /*!< (@ 0x40040024) Signature stop-address register */
+ __I uint32_t RESERVED2;
+ __I uint32_t FMSW0;
+} LPC_FLASHCTRL_TypeDef;
+/*@}*/ /* end of group LPC8xx_FLASHCTRL */
+
+
+/*------------- Power Management Unit (PMU) --------------------------*/
+/** @addtogroup LPC8xx_PMU LPC8xx Power Management Unit
+ @{
+*/
+typedef struct
+{
+ __IO uint32_t PCON; /*!< Offset: 0x000 Power control Register (R/W) */
+ __IO uint32_t GPREG0; /*!< Offset: 0x004 General purpose Register 0 (R/W) */
+ __IO uint32_t GPREG1; /*!< Offset: 0x008 General purpose Register 1 (R/W) */
+ __IO uint32_t GPREG2; /*!< Offset: 0x00C General purpose Register 2 (R/W) */
+ __IO uint32_t GPREG3; /*!< Offset: 0x010 General purpose Register 3 (R/W) */
+ __IO uint32_t DPDCTRL; /*!< Offset: 0x014 Deep power-down control register (R/W) */
+} LPC_PMU_TypeDef;
+/*@}*/ /* end of group LPC8xx_PMU */
+
+
+/*------------- Switch Matrix Port --------------------------*/
+/** @addtogroup LPC8xx_SWM LPC8xx Switch Matrix Port
+ @{
+*/
+typedef struct
+{
+ union {
+ __IO uint32_t PINASSIGN[9];
+ struct {
+ __IO uint32_t PINASSIGN0;
+ __IO uint32_t PINASSIGN1;
+ __IO uint32_t PINASSIGN2;
+ __IO uint32_t PINASSIGN3;
+ __IO uint32_t PINASSIGN4;
+ __IO uint32_t PINASSIGN5;
+ __IO uint32_t PINASSIGN6;
+ __IO uint32_t PINASSIGN7;
+ __IO uint32_t PINASSIGN8;
+ };
+ };
+ __I uint32_t RESERVED0[103];
+ __IO uint32_t PINENABLE0;
+} LPC_SWM_TypeDef;
+/*@}*/ /* end of group LPC8xx_SWM */
+
+
+// ------------------------------------------------------------------------------------------------
+// ----- GPIO_PORT -----
+// ------------------------------------------------------------------------------------------------
+
+/**
+ * @brief Product name title=UM10462 Chapter title=LPC8xx GPIO Modification date=3/17/2011 Major revision=0 Minor revision=3 (GPIO_PORT)
+ */
+
+typedef struct {
+ __IO uint8_t B0[18]; /*!< (@ 0xA0000000) Byte pin registers port 0 */
+ __I uint16_t RESERVED0[2039];
+ __IO uint32_t W0[18]; /*!< (@ 0xA0001000) Word pin registers port 0 */
+ uint32_t RESERVED1[1006];
+ __IO uint32_t DIR0; /* 0x2000 */
+ uint32_t RESERVED2[31];
+ __IO uint32_t MASK0; /* 0x2080 */
+ uint32_t RESERVED3[31];
+ __IO uint32_t PIN0; /* 0x2100 */
+ uint32_t RESERVED4[31];
+ __IO uint32_t MPIN0; /* 0x2180 */
+ uint32_t RESERVED5[31];
+ __IO uint32_t SET0; /* 0x2200 */
+ uint32_t RESERVED6[31];
+ __O uint32_t CLR0; /* 0x2280 */
+ uint32_t RESERVED7[31];
+ __O uint32_t NOT0; /* 0x2300 */
+
+} LPC_GPIO_PORT_TypeDef;
+
+
+// ------------------------------------------------------------------------------------------------
+// ----- PIN_INT -----
+// ------------------------------------------------------------------------------------------------
+
+/**
+ * @brief Product name title=UM10462 Chapter title=LPC8xx GPIO Modification date=3/17/2011 Major revision=0 Minor revision=3 (PIN_INT)
+ */
+
+typedef struct { /*!< (@ 0xA0004000) PIN_INT Structure */
+ __IO uint32_t ISEL; /*!< (@ 0xA0004000) Pin Interrupt Mode register */
+ __IO uint32_t IENR; /*!< (@ 0xA0004004) Pin Interrupt Enable (Rising) register */
+ __IO uint32_t SIENR; /*!< (@ 0xA0004008) Set Pin Interrupt Enable (Rising) register */
+ __IO uint32_t CIENR; /*!< (@ 0xA000400C) Clear Pin Interrupt Enable (Rising) register */
+ __IO uint32_t IENF; /*!< (@ 0xA0004010) Pin Interrupt Enable Falling Edge / Active Level register */
+ __IO uint32_t SIENF; /*!< (@ 0xA0004014) Set Pin Interrupt Enable Falling Edge / Active Level register */
+ __IO uint32_t CIENF; /*!< (@ 0xA0004018) Clear Pin Interrupt Enable Falling Edge / Active Level address */
+ __IO uint32_t RISE; /*!< (@ 0xA000401C) Pin Interrupt Rising Edge register */
+ __IO uint32_t FALL; /*!< (@ 0xA0004020) Pin Interrupt Falling Edge register */
+ __IO uint32_t IST; /*!< (@ 0xA0004024) Pin Interrupt Status register */
+ __IO uint32_t PMCTRL; /*!< (@ 0xA0004028) GPIO pattern match interrupt control register */
+ __IO uint32_t PMSRC; /*!< (@ 0xA000402C) GPIO pattern match interrupt bit-slice source register */
+ __IO uint32_t PMCFG; /*!< (@ 0xA0004030) GPIO pattern match interrupt bit slice configuration register */
+} LPC_PIN_INT_TypeDef;
+
+
+/*------------- CRC Engine (CRC) -----------------------------------------*/
+/** @addtogroup LPC8xx_CRC
+ @{
+*/
+typedef struct
+{
+ __IO uint32_t MODE;
+ __IO uint32_t SEED;
+ union {
+ __I uint32_t SUM;
+ __O uint32_t WR_DATA_DWORD;
+ __O uint16_t WR_DATA_WORD;
+ uint16_t RESERVED_WORD;
+ __O uint8_t WR_DATA_BYTE;
+ uint8_t RESERVED_BYTE[3];
+ };
+} LPC_CRC_TypeDef;
+/*@}*/ /* end of group LPC8xx_CRC */
+
+/*------------- Comparator (CMP) --------------------------------------------------*/
+/** @addtogroup LPC8xx_CMP LPC8xx Comparator
+ @{
+*/
+typedef struct { /*!< (@ 0x40024000) CMP Structure */
+ __IO uint32_t CTRL; /*!< (@ 0x40024000) Comparator control register */
+ __IO uint32_t LAD; /*!< (@ 0x40024004) Voltage ladder register */
+} LPC_CMP_TypeDef;
+/*@}*/ /* end of group LPC8xx_CMP */
+
+
+/*------------- Wakeup Timer (WKT) --------------------------------------------------*/
+/** @addtogroup LPC8xx_WKT
+ @{
+*/
+typedef struct { /*!< (@ 0x40028000) WKT Structure */
+ __IO uint32_t CTRL; /*!< (@ 0x40028000) Alarm/Wakeup Timer Control register */
+ uint32_t Reserved[2];
+ __IO uint32_t COUNT; /*!< (@ 0x4002800C) Alarm/Wakeup TImer counter register */
+} LPC_WKT_TypeDef;
+/*@}*/ /* end of group LPC8xx_WKT */
+
+/*------------- Multi-Rate Timer(MRT) --------------------------------------------------*/
+//New, Copied from lpc824
+/**
+ * @brief Multi-Rate Timer (MRT) (MRT)
+ */
+typedef struct { /*!< (@ 0x40004000) MRT Structure */
+ __IO uint32_t INTVAL0; /*!< (@ 0x40004000) MRT0 Time interval value register. This value
+ is loaded into the TIMER0 register. */
+ __I uint32_t TIMER0; /*!< (@ 0x40004004) MRT0 Timer register. This register reads the
+ value of the down-counter. */
+ __IO uint32_t CTRL0; /*!< (@ 0x40004008) MRT0 Control register. This register controls
+ the MRT0 modes. */
+ __IO uint32_t STAT0; /*!< (@ 0x4000400C) MRT0 Status register. */
+ __IO uint32_t INTVAL1; /*!< (@ 0x40004010) MRT0 Time interval value register. This value
+ is loaded into the TIMER0 register. */
+ __I uint32_t TIMER1; /*!< (@ 0x40004014) MRT0 Timer register. This register reads the
+ value of the down-counter. */
+ __IO uint32_t CTRL1; /*!< (@ 0x40004018) MRT0 Control register. This register controls
+ the MRT0 modes. */
+ __IO uint32_t STAT1; /*!< (@ 0x4000401C) MRT0 Status register. */
+ __IO uint32_t INTVAL2; /*!< (@ 0x40004020) MRT0 Time interval value register. This value
+ is loaded into the TIMER0 register. */
+ __I uint32_t TIMER2; /*!< (@ 0x40004024) MRT0 Timer register. This register reads the
+ value of the down-counter. */
+ __IO uint32_t CTRL2; /*!< (@ 0x40004028) MRT0 Control register. This register controls
+ the MRT0 modes. */
+ __IO uint32_t STAT2; /*!< (@ 0x4000402C) MRT0 Status register. */
+ __IO uint32_t INTVAL3; /*!< (@ 0x40004030) MRT0 Time interval value register. This value
+ is loaded into the TIMER0 register. */
+ __I uint32_t TIMER3; /*!< (@ 0x40004034) MRT0 Timer register. This register reads the
+ value of the down-counter. */
+ __IO uint32_t CTRL3; /*!< (@ 0x40004038) MRT0 Control register. This register controls
+ the MRT0 modes. */
+ __IO uint32_t STAT3; /*!< (@ 0x4000403C) MRT0 Status register. */
+ __I uint32_t RESERVED0[45];
+ __I uint32_t IDLE_CH; /*!< (@ 0x400040F4) Idle channel register. This register returns
+ the number of the first idle channel. */
+ __IO uint32_t IRQ_FLAG; /*!< (@ 0x400040F8) Global interrupt flag register */
+} LPC_MRT_TypeDef;
+
+/*------------- Universal Asynchronous Receiver Transmitter (USART) -----------*/
+/** @addtogroup LPC8xx_UART LPC8xx Universal Asynchronous Receiver/Transmitter
+ @{
+*/
+/**
+ * @brief Product name title=LPC8xx MCU Chapter title=USART Modification date=4/18/2012 Major revision=0 Minor revision=9 (USART)
+ */
+typedef struct
+{
+ __IO uint32_t CFG; /* 0x00 */
+ __IO uint32_t CTRL;
+ __IO uint32_t STAT;
+ __IO uint32_t INTENSET;
+ __O uint32_t INTENCLR; /* 0x10 */
+ __I uint32_t RXDATA;
+ __I uint32_t RXDATA_STAT;
+ __IO uint32_t TXDATA;
+ __IO uint32_t BRG; /* 0x20 */
+ __IO uint32_t INTSTAT;
+} LPC_USART_TypeDef;
+
+/*@}*/ /* end of group LPC8xx_USART */
+
+
+/*------------- Synchronous Serial Interface Controller (SPI) -----------------------*/
+/** @addtogroup LPC8xx_SPI LPC8xx Synchronous Serial Port
+ @{
+*/
+typedef struct
+{
+ __IO uint32_t CFG; /* 0x00 */
+ __IO uint32_t DLY;
+ __IO uint32_t STAT;
+ __IO uint32_t INTENSET;
+ __O uint32_t INTENCLR; /* 0x10 */
+ __I uint32_t RXDAT;
+ __IO uint32_t TXDATCTL;
+ __IO uint32_t TXDAT;
+ __IO uint32_t TXCTRL; /* 0x20 */
+ __IO uint32_t DIV;
+ __I uint32_t INTSTAT;
+} LPC_SPI_TypeDef;
+/*@}*/ /* end of group LPC8xx_SPI */
+
+
+/*------------- Inter-Integrated Circuit (I2C) -------------------------------*/
+/** @addtogroup LPC8xx_I2C I2C-Bus Interface
+ @{
+*/
+typedef struct
+{
+ __IO uint32_t CFG; /* 0x00 */
+ __IO uint32_t STAT;
+ __IO uint32_t INTENSET;
+ __O uint32_t INTENCLR;
+ __IO uint32_t TIMEOUT; /* 0x10 */
+ __IO uint32_t DIV;
+ __IO uint32_t INTSTAT;
+ uint32_t Reserved0[1];
+ __IO uint32_t MSTCTL; /* 0x20 */
+ __IO uint32_t MSTTIME;
+ __IO uint32_t MSTDAT;
+ uint32_t Reserved1[5];
+ __IO uint32_t SLVCTL; /* 0x40 */
+ __IO uint32_t SLVDAT;
+ __IO uint32_t SLVADR0;
+ __IO uint32_t SLVADR1;
+ __IO uint32_t SLVADR2; /* 0x50 */
+ __IO uint32_t SLVADR3;
+ __IO uint32_t SLVQUAL0;
+ uint32_t Reserved2[9];
+ __I uint32_t MONRXDAT; /* 0x80 */
+} LPC_I2C_TypeDef;
+
+/*@}*/ /* end of group LPC8xx_I2C */
+
+/**
+ * @brief State Configurable Timer (SCT) (SCT)
+ */
+
+/**
+ * @brief Product name title=UM10430 Chapter title=LPC8xx State Configurable Timer (SCT) Modification date=1/18/2011 Major revision=0 Minor revision=7 (SCT)
+ */
+
+#define CONFIG_SCT_nEV (6) /* Number of events */
+#define CONFIG_SCT_nRG (5) /* Number of match/compare registers */
+#define CONFIG_SCT_nOU (4) /* Number of outputs */
+
+typedef struct
+{
+ __IO uint32_t CONFIG; /* 0x000 Configuration Register */
+ union {
+ __IO uint32_t CTRL_U; /* 0x004 Control Register */
+ struct {
+ __IO uint16_t CTRL_L; /* 0x004 low control register */
+ __IO uint16_t CTRL_H; /* 0x006 high control register */
+ };
+ };
+ __IO uint16_t LIMIT_L; /* 0x008 limit register for counter L */
+ __IO uint16_t LIMIT_H; /* 0x00A limit register for counter H */
+ __IO uint16_t HALT_L; /* 0x00C halt register for counter L */
+ __IO uint16_t HALT_H; /* 0x00E halt register for counter H */
+ __IO uint16_t STOP_L; /* 0x010 stop register for counter L */
+ __IO uint16_t STOP_H; /* 0x012 stop register for counter H */
+ __IO uint16_t START_L; /* 0x014 start register for counter L */
+ __IO uint16_t START_H; /* 0x016 start register for counter H */
+ uint32_t RESERVED1[10]; /* 0x018-0x03C reserved */
+ union {
+ __IO uint32_t COUNT_U; /* 0x040 counter register */
+ struct {
+ __IO uint16_t COUNT_L; /* 0x040 counter register for counter L */
+ __IO uint16_t COUNT_H; /* 0x042 counter register for counter H */
+ };
+ };
+ __IO uint16_t STATE_L; /* 0x044 state register for counter L */
+ __IO uint16_t STATE_H; /* 0x046 state register for counter H */
+ __I uint32_t INPUT; /* 0x048 input register */
+ __IO uint16_t REGMODE_L; /* 0x04C match - capture registers mode register L */
+ __IO uint16_t REGMODE_H; /* 0x04E match - capture registers mode register H */
+ __IO uint32_t OUTPUT; /* 0x050 output register */
+ __IO uint32_t OUTPUTDIRCTRL; /* 0x054 Output counter direction Control Register */
+ __IO uint32_t RES; /* 0x058 conflict resolution register */
+ uint32_t RESERVED2[37]; /* 0x05C-0x0EC reserved */
+ __IO uint32_t EVEN; /* 0x0F0 event enable register */
+ __IO uint32_t EVFLAG; /* 0x0F4 event flag register */
+ __IO uint32_t CONEN; /* 0x0F8 conflict enable register */
+ __IO uint32_t CONFLAG; /* 0x0FC conflict flag register */
+
+ union {
+ __IO union { /* 0x100-... Match / Capture value */
+ uint32_t U; /* SCTMATCH[i].U Unified 32-bit register */
+ struct {
+ uint16_t L; /* SCTMATCH[i].L Access to L value */
+ uint16_t H; /* SCTMATCH[i].H Access to H value */
+ };
+ } MATCH[CONFIG_SCT_nRG];
+ __I union {
+ uint32_t U; /* SCTCAP[i].U Unified 32-bit register */
+ struct {
+ uint16_t L; /* SCTCAP[i].L Access to H value */
+ uint16_t H; /* SCTCAP[i].H Access to H value */
+ };
+ } CAP[CONFIG_SCT_nRG];
+ };
+
+
+ uint32_t RESERVED3[32-CONFIG_SCT_nRG]; /* ...-0x17C reserved */
+
+ union {
+ __IO uint16_t MATCH_L[CONFIG_SCT_nRG]; /* 0x180-... Match Value L counter */
+ __I uint16_t CAP_L[CONFIG_SCT_nRG]; /* 0x180-... Capture Value L counter */
+ };
+ uint16_t RESERVED4[32-CONFIG_SCT_nRG]; /* ...-0x1BE reserved */
+ union {
+ __IO uint16_t MATCH_H[CONFIG_SCT_nRG]; /* 0x1C0-... Match Value H counter */
+ __I uint16_t CAP_H[CONFIG_SCT_nRG]; /* 0x1C0-... Capture Value H counter */
+ };
+
+ uint16_t RESERVED5[32-CONFIG_SCT_nRG]; /* ...-0x1FE reserved */
+
+
+ union {
+ __IO union { /* 0x200-... Match Reload / Capture Control value */
+ uint32_t U; /* SCTMATCHREL[i].U Unified 32-bit register */
+ struct {
+ uint16_t L; /* SCTMATCHREL[i].L Access to L value */
+ uint16_t H; /* SCTMATCHREL[i].H Access to H value */
+ };
+ } MATCHREL[CONFIG_SCT_nRG];
+ __IO union {
+ uint32_t U; /* SCTCAPCTRL[i].U Unified 32-bit register */
+ struct {
+ uint16_t L; /* SCTCAPCTRL[i].L Access to H value */
+ uint16_t H; /* SCTCAPCTRL[i].H Access to H value */
+ };
+ } CAPCTRL[CONFIG_SCT_nRG];
+ };
+
+ uint32_t RESERVED6[32-CONFIG_SCT_nRG]; /* ...-0x27C reserved */
+
+ union {
+ __IO uint16_t MATCHREL_L[CONFIG_SCT_nRG]; /* 0x280-... Match Reload value L counter */
+ __IO uint16_t CAPCTRL_L[CONFIG_SCT_nRG]; /* 0x280-... Capture Control value L counter */
+ };
+ uint16_t RESERVED7[32-CONFIG_SCT_nRG]; /* ...-0x2BE reserved */
+ union {
+ __IO uint16_t MATCHREL_H[CONFIG_SCT_nRG]; /* 0x2C0-... Match Reload value H counter */
+ __IO uint16_t CAPCTRL_H[CONFIG_SCT_nRG]; /* 0x2C0-... Capture Control value H counter */
+ };
+ uint16_t RESERVED8[32-CONFIG_SCT_nRG]; /* ...-0x2FE reserved */
+
+ __IO struct { /* 0x300-0x3FC SCTEVENT[i].STATE / SCTEVENT[i].CTRL*/
+ uint32_t STATE; /* Event State Register */
+ uint32_t CTRL; /* Event Control Register */
+ } EVENT[CONFIG_SCT_nEV];
+
+ uint32_t RESERVED9[128-2*CONFIG_SCT_nEV]; /* ...-0x4FC reserved */
+
+ __IO struct { /* 0x500-0x57C SCTOUT[i].SET / SCTOUT[i].CLR */
+ uint32_t SET; /* Output n Set Register */
+ uint32_t CLR; /* Output n Clear Register */
+ } OUT[CONFIG_SCT_nOU];
+
+ uint32_t RESERVED10[191-2*CONFIG_SCT_nOU]; /* ...-0x7F8 reserved */
+
+ __I uint32_t MODULECONTENT; /* 0x7FC Module Content */
+
+} LPC_SCT_TypeDef;
+/*@}*/ /* end of group LPC8xx_SCT */
+
+
+/*------------- Watchdog Timer (WWDT) -----------------------------------------*/
+/** @addtogroup LPC8xx_WDT LPC8xx WatchDog Timer
+ @{
+*/
+typedef struct
+{
+ __IO uint32_t MOD; /*!< Offset: 0x000 Watchdog mode register (R/W) */
+ __IO uint32_t TC; /*!< Offset: 0x004 Watchdog timer constant register (R/W) */
+ __O uint32_t FEED; /*!< Offset: 0x008 Watchdog feed sequence register (W) */
+ __I uint32_t TV; /*!< Offset: 0x00C Watchdog timer value register (R) */
+ uint32_t RESERVED; /*!< Offset: 0x010 RESERVED */
+ __IO uint32_t WARNINT; /*!< Offset: 0x014 Watchdog timer warning int. register (R/W) */
+ __IO uint32_t WINDOW; /*!< Offset: 0x018 Watchdog timer window value register (R/W) */
+} LPC_WWDT_TypeDef;
+/*@}*/ /* end of group LPC8xx_WDT */
+
+
+#if defined ( __CC_ARM )
+#pragma no_anon_unions
+#endif
+
+/******************************************************************************/
+/* Peripheral memory map */
+/******************************************************************************/
+/* Base addresses */
+#define LPC_FLASH_BASE (0x00000000UL)
+#define LPC_RAM_BASE (0x10000000UL)
+#define LPC_ROM_BASE (0x1FFF0000UL)
+#define LPC_APB0_BASE (0x40000000UL)
+#define LPC_AHB_BASE (0x50000000UL)
+
+/* APB0 peripherals */
+#define LPC_WWDT_BASE (LPC_APB0_BASE + 0x00000)
+#define LPC_MRT_BASE (LPC_APB0_BASE + 0x04000)
+#define LPC_WKT_BASE (LPC_APB0_BASE + 0x08000)
+#define LPC_SWM_BASE (LPC_APB0_BASE + 0x0C000)
+#define LPC_PMU_BASE (LPC_APB0_BASE + 0x20000)
+#define LPC_CMP_BASE (LPC_APB0_BASE + 0x24000)
+
+#define LPC_FLASHCTRL_BASE (LPC_APB0_BASE + 0x40000)
+#define LPC_IOCON_BASE (LPC_APB0_BASE + 0x44000)
+#define LPC_SYSCON_BASE (LPC_APB0_BASE + 0x48000)
+#define LPC_I2C_BASE (LPC_APB0_BASE + 0x50000)
+#define LPC_SPI0_BASE (LPC_APB0_BASE + 0x58000)
+#define LPC_SPI1_BASE (LPC_APB0_BASE + 0x5C000)
+#define LPC_USART0_BASE (LPC_APB0_BASE + 0x64000)
+#define LPC_USART1_BASE (LPC_APB0_BASE + 0x68000)
+#define LPC_USART2_BASE (LPC_APB0_BASE + 0x6C000)
+
+/* AHB peripherals */
+#define LPC_CRC_BASE (LPC_AHB_BASE + 0x00000)
+#define LPC_SCT_BASE (LPC_AHB_BASE + 0x04000)
+
+#define LPC_GPIO_PORT_BASE (0xA0000000)
+#define LPC_PIN_INT_BASE (LPC_GPIO_PORT_BASE + 0x4000)
+
+/******************************************************************************/
+/* Peripheral declaration */
+/******************************************************************************/
+#define LPC_WWDT ((LPC_WWDT_TypeDef *) LPC_WWDT_BASE )
+#define LPC_MRT ((LPC_MRT_TypeDef *) LPC_MRT_BASE )
+
+
+#define LPC_WKT ((LPC_WKT_TypeDef *) LPC_WKT_BASE )
+#define LPC_SWM ((LPC_SWM_TypeDef *) LPC_SWM_BASE )
+#define LPC_PMU ((LPC_PMU_TypeDef *) LPC_PMU_BASE )
+#define LPC_CMP ((LPC_CMP_TypeDef *) LPC_CMP_BASE )
+
+#define LPC_FLASHCTRL ((LPC_FLASHCTRL_TypeDef *) LPC_FLASHCTRL_BASE )
+#define LPC_IOCON ((LPC_IOCON_TypeDef *) LPC_IOCON_BASE )
+#define LPC_SYSCON ((LPC_SYSCON_TypeDef *) LPC_SYSCON_BASE)
+#define LPC_I2C ((LPC_I2C_TypeDef *) LPC_I2C_BASE )
+#define LPC_SPI0 ((LPC_SPI_TypeDef *) LPC_SPI0_BASE )
+#define LPC_SPI1 ((LPC_SPI_TypeDef *) LPC_SPI1_BASE )
+#define LPC_USART0 ((LPC_USART_TypeDef *) LPC_USART0_BASE )
+#define LPC_USART1 ((LPC_USART_TypeDef *) LPC_USART1_BASE )
+#define LPC_USART2 ((LPC_USART_TypeDef *) LPC_USART2_BASE )
+
+#define LPC_CRC ((LPC_CRC_TypeDef *) LPC_CRC_BASE )
+#define LPC_SCT ((LPC_SCT_TypeDef *) LPC_SCT_BASE )
+
+#define LPC_GPIO_PORT ((LPC_GPIO_PORT_TypeDef *) LPC_GPIO_PORT_BASE )
+#define LPC_PIN_INT ((LPC_PIN_INT_TypeDef *) LPC_PIN_INT_BASE )
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __LPC8xx_H__ */