BLE_API - just a fork

Users » marfife » Code » BLE_API

just a fork

Fork of BLE_API by Bluetooth Low Energy

ble/BLE.h@821:86038b69609c, 2015-09-29 (annotated)

Committer:: rgrover1
Date:: Tue Sep 29 09:49:24 2015 +0100
Revision:: 821:86038b69609c
Parent:: 820:3cb854c7f930
Child:: 822:a0f080d1e836

Synchronized with git rev cc3db850

Author: Rohit Grover

minor improvement to comment header for GattServer::onDataRead()

Who changed what in which revision?

User	Revision	Line number	New contents of line
rgrover1	716:11b41f651697	1	/* mbed Microcontroller Library
rgrover1	716:11b41f651697	2	* Copyright (c) 2006-2013 ARM Limited
rgrover1	716:11b41f651697	3	*
rgrover1	716:11b41f651697	4	* Licensed under the Apache License, Version 2.0 (the "License");
rgrover1	716:11b41f651697	5	* you may not use this file except in compliance with the License.
rgrover1	716:11b41f651697	6	* You may obtain a copy of the License at
rgrover1	716:11b41f651697	7	*
rgrover1	716:11b41f651697	8	* http://www.apache.org/licenses/LICENSE-2.0
rgrover1	716:11b41f651697	9	*
rgrover1	716:11b41f651697	10	* Unless required by applicable law or agreed to in writing, software
rgrover1	716:11b41f651697	11	* distributed under the License is distributed on an "AS IS" BASIS,
rgrover1	716:11b41f651697	12	* WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
rgrover1	716:11b41f651697	13	* See the License for the specific language governing permissions and
rgrover1	716:11b41f651697	14	* limitations under the License.
rgrover1	716:11b41f651697	15	*/
rgrover1	716:11b41f651697	16
rgrover1	716:11b41f651697	17	#ifndef __BLE_H__
rgrover1	716:11b41f651697	18	#define __BLE_H__
rgrover1	716:11b41f651697	19
rgrover1	716:11b41f651697	20	#include "blecommon.h"
rgrover1	716:11b41f651697	21	#include "Gap.h"
rgrover1	716:11b41f651697	22	#include "GattServer.h"
rgrover1	716:11b41f651697	23	#include "GattClient.h"
rgrover1	716:11b41f651697	24	#include "BLEInstanceBase.h"
rgrover1	716:11b41f651697	25
rgrover1	818:61c62a287194	26	#include "mbed_error.h"
rgrover1	818:61c62a287194	27
rgrover1	716:11b41f651697	28	/**
rgrover1	716:11b41f651697	29	* The base class used to abstract away BLE capable radio transceivers or SOCs,
rgrover1	716:11b41f651697	30	* to enable this BLE API to work with any radio transparently.
rgrover1	716:11b41f651697	31	*/
rgrover1	716:11b41f651697	32	class BLE
rgrover1	716:11b41f651697	33	{
rgrover1	716:11b41f651697	34	public:
rgrover1	716:11b41f651697	35	/**
rgrover1	716:11b41f651697	36	* Initialize the BLE controller. This should be called before using
rgrover1	716:11b41f651697	37	* anything else in the BLE_API.
rgrover1	716:11b41f651697	38	*
rgrover1	716:11b41f651697	39	* init() hands control to the underlying BLE module to accomplish
rgrover1	716:11b41f651697	40	* initialization. This initialization may tacitly depend on other hardware
rgrover1	716:11b41f651697	41	* setup (such as clocks or power-modes) which happens early on during
rgrover1	716:11b41f651697	42	* system startup. It may not be safe to call init() from global static
rgrover1	716:11b41f651697	43	* context where ordering is compiler specific and can't be guaranteed--it
rgrover1	716:11b41f651697	44	* is safe to call BLE::init() from within main().
rgrover1	716:11b41f651697	45	*/
rgrover1	716:11b41f651697	46	ble_error_t init();
rgrover1	716:11b41f651697	47
rgrover1	716:11b41f651697	48	/**
rgrover1	716:11b41f651697	49	* Purge the BLE stack of GATT and GAP state. init() must be called
rgrover1	716:11b41f651697	50	* afterwards to re-instate services and GAP state. This API offers a way to
rgrover1	716:11b41f651697	51	* repopulate the GATT database with new services and characteristics.
rgrover1	716:11b41f651697	52	*/
rgrover1	716:11b41f651697	53	ble_error_t shutdown(void) {
rgrover1	716:11b41f651697	54	clearAdvertisingPayload();
rgrover1	818:61c62a287194	55	if (!transport) {
rgrover1	818:61c62a287194	56	error("bad handle to underlying transport");
rgrover1	818:61c62a287194	57	}
rgrover1	716:11b41f651697	58	return transport->shutdown();
rgrover1	716:11b41f651697	59	}
rgrover1	716:11b41f651697	60
rgrover1	716:11b41f651697	61	/**
rgrover1	716:11b41f651697	62	* This call allows the application to get the BLE stack version information.
rgrover1	716:11b41f651697	63	*
rgrover1	716:11b41f651697	64	* @return A pointer to a const string representing the version.
rgrover1	716:11b41f651697	65	* Note: The string is owned by the BLE_API.
rgrover1	716:11b41f651697	66	*/
rgrover1	716:11b41f651697	67	const char *getVersion(void) {
rgrover1	818:61c62a287194	68	if (!transport) {
rgrover1	818:61c62a287194	69	error("bad handle to underlying transport");
rgrover1	818:61c62a287194	70	}
rgrover1	716:11b41f651697	71	return transport->getVersion();
rgrover1	716:11b41f651697	72	}
rgrover1	716:11b41f651697	73
rgrover1	716:11b41f651697	74	/*
rgrover1	716:11b41f651697	75	* Accessors to GAP. Please refer to Gap.h. All GAP related functionality requires
rgrover1	716:11b41f651697	76	* going through this accessor.
rgrover1	716:11b41f651697	77	*/
rgrover1	716:11b41f651697	78	const Gap &gap() const {
rgrover1	818:61c62a287194	79	if (!transport) {
rgrover1	818:61c62a287194	80	error("bad handle to underlying transport");
rgrover1	818:61c62a287194	81	}
rgrover1	716:11b41f651697	82	return transport->getGap();
rgrover1	716:11b41f651697	83	}
rgrover1	716:11b41f651697	84	Gap &gap() {
rgrover1	818:61c62a287194	85	if (!transport) {
rgrover1	818:61c62a287194	86	error("bad handle to underlying transport");
rgrover1	818:61c62a287194	87	}
rgrover1	716:11b41f651697	88	return transport->getGap();
rgrover1	716:11b41f651697	89	}
rgrover1	716:11b41f651697	90
rgrover1	716:11b41f651697	91	/*
rgrover1	716:11b41f651697	92	* Accessors to GATT Server. Please refer to GattServer.h. All GATTServer related
rgrover1	716:11b41f651697	93	* functionality requires going through this accessor.
rgrover1	716:11b41f651697	94	*/
rgrover1	716:11b41f651697	95	const GattServer& gattServer() const {
rgrover1	818:61c62a287194	96	if (!transport) {
rgrover1	818:61c62a287194	97	error("bad handle to underlying transport");
rgrover1	818:61c62a287194	98	}
rgrover1	716:11b41f651697	99	return transport->getGattServer();
rgrover1	716:11b41f651697	100	}
rgrover1	716:11b41f651697	101	GattServer& gattServer() {
rgrover1	818:61c62a287194	102	if (!transport) {
rgrover1	818:61c62a287194	103	error("bad handle to underlying transport");
rgrover1	818:61c62a287194	104	}
rgrover1	716:11b41f651697	105	return transport->getGattServer();
rgrover1	716:11b41f651697	106	}
rgrover1	716:11b41f651697	107
rgrover1	716:11b41f651697	108	/*
rgrover1	716:11b41f651697	109	* Accessors to GATT Client. Please refer to GattClient.h. All GATTClient related
rgrover1	716:11b41f651697	110	* functionality requires going through this accessor.
rgrover1	716:11b41f651697	111	*/
rgrover1	716:11b41f651697	112	const GattClient& gattClient() const {
rgrover1	818:61c62a287194	113	if (!transport) {
rgrover1	818:61c62a287194	114	error("bad handle to underlying transport");
rgrover1	818:61c62a287194	115	}
rgrover1	716:11b41f651697	116	return transport->getGattClient();
rgrover1	716:11b41f651697	117	}
rgrover1	716:11b41f651697	118	GattClient& gattClient() {
rgrover1	818:61c62a287194	119	if (!transport) {
rgrover1	818:61c62a287194	120	error("bad handle to underlying transport");
rgrover1	818:61c62a287194	121	}
rgrover1	716:11b41f651697	122	return transport->getGattClient();
rgrover1	716:11b41f651697	123	}
rgrover1	716:11b41f651697	124
rgrover1	716:11b41f651697	125	/*
rgrover1	716:11b41f651697	126	* Accessors to Security Manager. Please refer to SecurityManager.h. All
rgrover1	716:11b41f651697	127	* SecurityManager related functionality requires going through this
rgrover1	716:11b41f651697	128	* accessor.
rgrover1	716:11b41f651697	129	*/
rgrover1	716:11b41f651697	130	const SecurityManager& securityManager() const {
rgrover1	818:61c62a287194	131	if (!transport) {
rgrover1	818:61c62a287194	132	error("bad handle to underlying transport");
rgrover1	818:61c62a287194	133	}
rgrover1	716:11b41f651697	134	return transport->getSecurityManager();
rgrover1	716:11b41f651697	135	}
rgrover1	716:11b41f651697	136	SecurityManager& securityManager() {
rgrover1	818:61c62a287194	137	if (!transport) {
rgrover1	818:61c62a287194	138	error("bad handle to underlying transport");
rgrover1	818:61c62a287194	139	}
rgrover1	716:11b41f651697	140	return transport->getSecurityManager();
rgrover1	716:11b41f651697	141	}
rgrover1	716:11b41f651697	142
rgrover1	716:11b41f651697	143	/**
rgrover1	716:11b41f651697	144	* Yield control to the BLE stack or to other tasks waiting for events. This
rgrover1	716:11b41f651697	145	* is a sleep function which will return when there is an application
rgrover1	716:11b41f651697	146	* specific interrupt, but the MCU might wake up several times before
rgrover1	716:11b41f651697	147	* returning (to service the stack). This is not always interchangeable with
rgrover1	716:11b41f651697	148	* WFE().
rgrover1	716:11b41f651697	149	*/
rgrover1	716:11b41f651697	150	void waitForEvent(void) {
rgrover1	818:61c62a287194	151	if (!transport) {
rgrover1	818:61c62a287194	152	error("bad handle to underlying transport");
rgrover1	818:61c62a287194	153	}
rgrover1	716:11b41f651697	154	transport->waitForEvent();
rgrover1	716:11b41f651697	155	}
rgrover1	716:11b41f651697	156
rgrover1	716:11b41f651697	157	/*
rgrover1	716:11b41f651697	158	* Deprecation alert!
rgrover1	716:11b41f651697	159	* All of the following are deprecated and may be dropped in a future
rgrover1	716:11b41f651697	160	* release. Documentation should refer to alternative APIs.
rgrover1	716:11b41f651697	161	*/
rgrover1	716:11b41f651697	162
rgrover1	716:11b41f651697	163	/* GAP specific APIs. */
rgrover1	716:11b41f651697	164	public:
rgrover1	716:11b41f651697	165	/**
rgrover1	716:11b41f651697	166	* Set the BTLE MAC address and type.
rgrover1	716:11b41f651697	167	* @return BLE_ERROR_NONE on success.
rgrover1	716:11b41f651697	168	*
rgrover1	716:11b41f651697	169	* @note: This API is now deprecated and will be dropped in the future.
rgrover1	716:11b41f651697	170	* You should use the parallel API from Gap directly. A former call to
rgrover1	716:11b41f651697	171	* ble.setAddress(...) should be replaced with
rgrover1	716:11b41f651697	172	* ble.gap().setAddress(...).
rgrover1	716:11b41f651697	173	*/
rgrover1	716:11b41f651697	174	ble_error_t setAddress(Gap::AddressType_t type, const Gap::Address_t address) {
rgrover1	716:11b41f651697	175	return gap().setAddress(type, address);
rgrover1	716:11b41f651697	176	}
rgrover1	716:11b41f651697	177
rgrover1	716:11b41f651697	178	/**
rgrover1	716:11b41f651697	179	* Fetch the BTLE MAC address and type.
rgrover1	716:11b41f651697	180	* @return BLE_ERROR_NONE on success.
rgrover1	716:11b41f651697	181	*
rgrover1	716:11b41f651697	182	* @note: This API is now deprecated and will be dropped in the future.
rgrover1	716:11b41f651697	183	* You should use the parallel API from Gap directly. A former call to
rgrover1	716:11b41f651697	184	* ble.getAddress(...) should be replaced with
rgrover1	716:11b41f651697	185	* ble.gap().getAddress(...).
rgrover1	716:11b41f651697	186	*/
rgrover1	716:11b41f651697	187	ble_error_t getAddress(Gap::AddressType_t *typeP, Gap::Address_t address) {
rgrover1	716:11b41f651697	188	return gap().getAddress(typeP, address);
rgrover1	716:11b41f651697	189	}
rgrover1	716:11b41f651697	190
rgrover1	716:11b41f651697	191	/**
rgrover1	716:11b41f651697	192	* Set the GAP advertising mode to use for this device.
rgrover1	716:11b41f651697	193	*
rgrover1	716:11b41f651697	194	* @note: This API is now deprecated and will be dropped in the future.
rgrover1	716:11b41f651697	195	* You should use the parallel API from Gap directly. A former call to
rgrover1	716:11b41f651697	196	* ble.setAdvertisingType(...) should be replaced with
rgrover1	716:11b41f651697	197	* ble.gap().setAdvertisingType(...).
rgrover1	716:11b41f651697	198	*/
rgrover1	716:11b41f651697	199	void setAdvertisingType(GapAdvertisingParams::AdvertisingType advType) {
rgrover1	716:11b41f651697	200	gap().setAdvertisingType(advType);
rgrover1	716:11b41f651697	201	}
rgrover1	716:11b41f651697	202
rgrover1	716:11b41f651697	203	/**
rgrover1	716:11b41f651697	204	* @param[in] interval
rgrover1	716:11b41f651697	205	* Advertising interval in units of milliseconds. Advertising
rgrover1	716:11b41f651697	206	* is disabled if interval is 0. If interval is smaller than
rgrover1	716:11b41f651697	207	* the minimum supported value, then the minimum supported
rgrover1	716:11b41f651697	208	* value is used instead. This minimum value can be discovered
rgrover1	716:11b41f651697	209	* using getMinAdvertisingInterval().
rgrover1	716:11b41f651697	210	*
rgrover1	716:11b41f651697	211	* This field must be set to 0 if connectionMode is equal
rgrover1	716:11b41f651697	212	* to ADV_CONNECTABLE_DIRECTED.
rgrover1	716:11b41f651697	213	*
rgrover1	716:11b41f651697	214	* @note: Decreasing this value will allow central devices to detect a
rgrover1	716:11b41f651697	215	* peripheral faster at the expense of more power being used by the radio
rgrover1	716:11b41f651697	216	* due to the higher data transmit rate.
rgrover1	716:11b41f651697	217	*
rgrover1	716:11b41f651697	218	* @note: This API is now deprecated and will be dropped in the future.
rgrover1	716:11b41f651697	219	* You should use the parallel API from Gap directly. A former call to
rgrover1	716:11b41f651697	220	* ble.setAdvertisingInterval(...) should be replaced with
rgrover1	716:11b41f651697	221	* ble.gap().setAdvertisingInterval(...).
rgrover1	716:11b41f651697	222	*
rgrover1	716:11b41f651697	223	* @note: [WARNING] This API previously used 0.625ms as the unit for its
rgrover1	716:11b41f651697	224	* 'interval' argument. That required an explicit conversion from
rgrover1	716:11b41f651697	225	* milliseconds using Gap::MSEC_TO_GAP_DURATION_UNITS(). This conversion is
rgrover1	716:11b41f651697	226	* no longer required as the new units are milliseconds. Any application
rgrover1	716:11b41f651697	227	* code depending on the old semantics would need to be updated accordingly.
rgrover1	716:11b41f651697	228	*/
rgrover1	716:11b41f651697	229	void setAdvertisingInterval(uint16_t interval) {
rgrover1	716:11b41f651697	230	gap().setAdvertisingInterval(interval);
rgrover1	716:11b41f651697	231	}
rgrover1	716:11b41f651697	232
rgrover1	716:11b41f651697	233	/**
rgrover1	716:11b41f651697	234	* @return Minimum Advertising interval in milliseconds.
rgrover1	716:11b41f651697	235	*
rgrover1	716:11b41f651697	236	* @note: This API is now deprecated and will be dropped in the future.
rgrover1	716:11b41f651697	237	* You should use the parallel API from Gap directly. A former call to
rgrover1	716:11b41f651697	238	* ble.getMinAdvertisingInterval(...) should be replaced with
rgrover1	716:11b41f651697	239	* ble.gap().getMinAdvertisingInterval(...).
rgrover1	716:11b41f651697	240	*/
rgrover1	716:11b41f651697	241	uint16_t getMinAdvertisingInterval(void) const {
rgrover1	716:11b41f651697	242	return gap().getMinAdvertisingInterval();
rgrover1	716:11b41f651697	243	}
rgrover1	716:11b41f651697	244
rgrover1	716:11b41f651697	245	/**
rgrover1	716:11b41f651697	246	* @return Minimum Advertising interval in milliseconds for non-connectible mode.
rgrover1	716:11b41f651697	247	*
rgrover1	716:11b41f651697	248	* @note: This API is now deprecated and will be dropped in the future.
rgrover1	716:11b41f651697	249	* You should use the parallel API from Gap directly. A former call to
rgrover1	716:11b41f651697	250	* ble.getMinNonConnectableAdvertisingInterval(...) should be replaced with
rgrover1	716:11b41f651697	251	* ble.gap().getMinNonConnectableAdvertisingInterval(...).
rgrover1	716:11b41f651697	252	*/
rgrover1	716:11b41f651697	253	uint16_t getMinNonConnectableAdvertisingInterval(void) const {
rgrover1	716:11b41f651697	254	return gap().getMinNonConnectableAdvertisingInterval();
rgrover1	716:11b41f651697	255	}
rgrover1	716:11b41f651697	256
rgrover1	716:11b41f651697	257	/**
rgrover1	716:11b41f651697	258	* @return Maximum Advertising interval in milliseconds.
rgrover1	716:11b41f651697	259	*
rgrover1	716:11b41f651697	260	* @note: This API is now deprecated and will be dropped in the future.
rgrover1	716:11b41f651697	261	* You should use the parallel API from Gap directly. A former call to
rgrover1	716:11b41f651697	262	* ble.getMaxAdvertisingInterval(...) should be replaced with
rgrover1	716:11b41f651697	263	* ble.gap().getMaxAdvertisingInterval(...).
rgrover1	716:11b41f651697	264	*/
rgrover1	716:11b41f651697	265	uint16_t getMaxAdvertisingInterval(void) const {
rgrover1	716:11b41f651697	266	return gap().getMaxAdvertisingInterval();
rgrover1	716:11b41f651697	267	}
rgrover1	716:11b41f651697	268
rgrover1	716:11b41f651697	269	/**
rgrover1	716:11b41f651697	270	* @param[in] timeout
rgrover1	716:11b41f651697	271	* Advertising timeout (in seconds) between 0x1 and 0x3FFF (1
rgrover1	716:11b41f651697	272	* and 16383). Use 0 to disable the advertising timeout.
rgrover1	716:11b41f651697	273	*
rgrover1	716:11b41f651697	274	* @note: This API is now deprecated and will be dropped in the future.
rgrover1	716:11b41f651697	275	* You should use the parallel API from Gap directly. A former call to
rgrover1	716:11b41f651697	276	* ble.setAdvertisingTimeout(...) should be replaced with
rgrover1	716:11b41f651697	277	* ble.gap().setAdvertisingTimeout(...).
rgrover1	716:11b41f651697	278	*/
rgrover1	716:11b41f651697	279	void setAdvertisingTimeout(uint16_t timeout) {
rgrover1	716:11b41f651697	280	gap().setAdvertisingTimeout(timeout);
rgrover1	716:11b41f651697	281	}
rgrover1	716:11b41f651697	282
rgrover1	716:11b41f651697	283	/**
rgrover1	716:11b41f651697	284	* Setup a particular, user-constructed set of advertisement parameters for
rgrover1	716:11b41f651697	285	* the underlying stack. It would be uncommon for this API to be used
rgrover1	716:11b41f651697	286	* directly; there are other APIs to tweak advertisement parameters
rgrover1	716:11b41f651697	287	* individually (see above).
rgrover1	716:11b41f651697	288	*
rgrover1	716:11b41f651697	289	* @note: This API is now deprecated and will be dropped in the future.
rgrover1	716:11b41f651697	290	* You should use the parallel API from Gap directly. A former call to
rgrover1	716:11b41f651697	291	* ble.setAdvertisingParams(...) should be replaced with
rgrover1	716:11b41f651697	292	* ble.gap().setAdvertisingParams(...).
rgrover1	716:11b41f651697	293	*/
rgrover1	716:11b41f651697	294	void setAdvertisingParams(const GapAdvertisingParams &advParams) {
rgrover1	716:11b41f651697	295	gap().setAdvertisingParams(advParams);
rgrover1	716:11b41f651697	296	}
rgrover1	716:11b41f651697	297
rgrover1	716:11b41f651697	298	/**
rgrover1	716:11b41f651697	299	* @return Read back advertising parameters. Useful for storing and
rgrover1	716:11b41f651697	300	* restoring parameters rapidly.
rgrover1	716:11b41f651697	301	*
rgrover1	716:11b41f651697	302	* @note: This API is now deprecated and will be dropped in the future.
rgrover1	716:11b41f651697	303	* You should use the parallel API from Gap directly. A former call to
rgrover1	716:11b41f651697	304	* ble.getAdvertisingParams(...) should be replaced with
rgrover1	716:11b41f651697	305	* ble.gap().getAdvertisingParams(...).
rgrover1	716:11b41f651697	306	*/
rgrover1	716:11b41f651697	307	const GapAdvertisingParams &getAdvertisingParams(void) const {
rgrover1	716:11b41f651697	308	return gap().getAdvertisingParams();
rgrover1	716:11b41f651697	309	}
rgrover1	716:11b41f651697	310
rgrover1	716:11b41f651697	311	/**
rgrover1	716:11b41f651697	312	* Accumulate an AD structure in the advertising payload. Please note that
rgrover1	716:11b41f651697	313	* the payload is limited to 31 bytes. The SCAN_RESPONSE message may be used
rgrover1	716:11b41f651697	314	* as an additional 31 bytes if the advertising payload proves to be too
rgrover1	716:11b41f651697	315	* small.
rgrover1	716:11b41f651697	316	*
rgrover1	716:11b41f651697	317	* @param[in] flags
rgrover1	716:11b41f651697	318	* The flags to be added. Please refer to
rgrover1	716:11b41f651697	319	* GapAdvertisingData::Flags for valid flags. Multiple
rgrover1	716:11b41f651697	320	* flags may be specified in combination.
rgrover1	716:11b41f651697	321	*
rgrover1	716:11b41f651697	322	* @note: This API is now deprecated and will be dropped in the future.
rgrover1	716:11b41f651697	323	* You should use the parallel API from Gap directly. A former call to
rgrover1	716:11b41f651697	324	* ble.accumulateAdvertisingPayload(flags) should be replaced with
rgrover1	716:11b41f651697	325	* ble.gap().accumulateAdvertisingPayload(flags).
rgrover1	716:11b41f651697	326	*/
rgrover1	716:11b41f651697	327	ble_error_t accumulateAdvertisingPayload(uint8_t flags) {
rgrover1	716:11b41f651697	328	return gap().accumulateAdvertisingPayload(flags);
rgrover1	716:11b41f651697	329	}
rgrover1	716:11b41f651697	330
rgrover1	716:11b41f651697	331	/**
rgrover1	716:11b41f651697	332	* Accumulate an AD structure in the advertising payload. Please note that
rgrover1	716:11b41f651697	333	* the payload is limited to 31 bytes. The SCAN_RESPONSE message may be used
rgrover1	716:11b41f651697	334	* as an additional 31 bytes if the advertising payload proves to be too
rgrover1	716:11b41f651697	335	* small.
rgrover1	716:11b41f651697	336	*
rgrover1	716:11b41f651697	337	* @param[in] app
rgrover1	716:11b41f651697	338	* The appearance of the peripheral.
rgrover1	716:11b41f651697	339	*
rgrover1	716:11b41f651697	340	* @note: This API is now deprecated and will be dropped in the future.
rgrover1	716:11b41f651697	341	* You should use the parallel API from Gap directly. A former call to
rgrover1	716:11b41f651697	342	* ble.accumulateAdvertisingPayload(appearance) should be replaced with
rgrover1	716:11b41f651697	343	* ble.gap().accumulateAdvertisingPayload(appearance).
rgrover1	716:11b41f651697	344	*/
rgrover1	716:11b41f651697	345	ble_error_t accumulateAdvertisingPayload(GapAdvertisingData::Appearance app) {
rgrover1	716:11b41f651697	346	return gap().accumulateAdvertisingPayload(app);
rgrover1	716:11b41f651697	347	}
rgrover1	716:11b41f651697	348
rgrover1	716:11b41f651697	349	/**
rgrover1	716:11b41f651697	350	* Accumulate an AD structure in the advertising payload. Please note that
rgrover1	716:11b41f651697	351	* the payload is limited to 31 bytes. The SCAN_RESPONSE message may be used
rgrover1	716:11b41f651697	352	* as an additional 31 bytes if the advertising payload proves to be too
rgrover1	716:11b41f651697	353	* small.
rgrover1	716:11b41f651697	354	*
rgrover1	716:11b41f651697	355	* @param[in] app
rgrover1	716:11b41f651697	356	* The max transmit power to be used by the controller. This
rgrover1	716:11b41f651697	357	* is only a hint.
rgrover1	716:11b41f651697	358	*
rgrover1	716:11b41f651697	359	* @note: This API is now deprecated and will be dropped in the future.
rgrover1	716:11b41f651697	360	* You should use the parallel API from Gap directly. A former call to
rgrover1	716:11b41f651697	361	* ble.accumulateAdvertisingPayloadTxPower(txPower) should be replaced with
rgrover1	716:11b41f651697	362	* ble.gap().accumulateAdvertisingPayloadTxPower(txPower).
rgrover1	716:11b41f651697	363	*/
rgrover1	716:11b41f651697	364	ble_error_t accumulateAdvertisingPayloadTxPower(int8_t power) {
rgrover1	716:11b41f651697	365	return gap().accumulateAdvertisingPayloadTxPower(power);
rgrover1	716:11b41f651697	366	}
rgrover1	716:11b41f651697	367
rgrover1	716:11b41f651697	368	/**
rgrover1	716:11b41f651697	369	* Accumulate a variable length byte-stream as an AD structure in the
rgrover1	716:11b41f651697	370	* advertising payload. Please note that the payload is limited to 31 bytes.
rgrover1	716:11b41f651697	371	* The SCAN_RESPONSE message may be used as an additional 31 bytes if the
rgrover1	716:11b41f651697	372	* advertising payload proves to be too small.
rgrover1	716:11b41f651697	373	*
rgrover1	716:11b41f651697	374	* @param type The type which describes the variable length data.
rgrover1	716:11b41f651697	375	* @param data data bytes.
rgrover1	716:11b41f651697	376	* @param len length of data.
rgrover1	716:11b41f651697	377	*
rgrover1	716:11b41f651697	378	* @note: This API is now deprecated and will be dropped in the future.
rgrover1	716:11b41f651697	379	* You should use the parallel API from Gap directly. A former call to
rgrover1	716:11b41f651697	380	* ble.accumulateAdvertisingPayload(...) should be replaced with
rgrover1	716:11b41f651697	381	* ble.gap().accumulateAdvertisingPayload(...).
rgrover1	716:11b41f651697	382	*/
rgrover1	716:11b41f651697	383	ble_error_t accumulateAdvertisingPayload(GapAdvertisingData::DataType type, const uint8_t *data, uint8_t len) {
rgrover1	716:11b41f651697	384	return gap().accumulateAdvertisingPayload(type, data, len);
rgrover1	716:11b41f651697	385	}
rgrover1	716:11b41f651697	386
rgrover1	716:11b41f651697	387	/**
rgrover1	716:11b41f651697	388	* Setup a particular, user-constructed advertisement payload for the
rgrover1	716:11b41f651697	389	* underlying stack. It would be uncommon for this API to be used directly;
rgrover1	716:11b41f651697	390	* there are other APIs to build an advertisement payload (see above).
rgrover1	716:11b41f651697	391	*
rgrover1	716:11b41f651697	392	* @note: This API is now deprecated and will be dropped in the future.
rgrover1	716:11b41f651697	393	* You should use the parallel API from Gap directly. A former call to
rgrover1	716:11b41f651697	394	* ble.setAdvertisingData(...) should be replaced with
rgrover1	716:11b41f651697	395	* ble.gap().setAdvertisingPayload(...).
rgrover1	716:11b41f651697	396	*/
rgrover1	716:11b41f651697	397	ble_error_t setAdvertisingData(const GapAdvertisingData &advData) {
rgrover1	716:11b41f651697	398	return gap().setAdvertisingPayload(advData);
rgrover1	716:11b41f651697	399	}
rgrover1	716:11b41f651697	400
rgrover1	716:11b41f651697	401	/**
rgrover1	716:11b41f651697	402	* @return Read back advertising data. Useful for storing and
rgrover1	716:11b41f651697	403	* restoring payload.
rgrover1	716:11b41f651697	404	*
rgrover1	716:11b41f651697	405	* @note: This API is now deprecated and will be dropped in the future.
rgrover1	716:11b41f651697	406	* You should use the parallel API from Gap directly. A former call to
rgrover1	716:11b41f651697	407	* ble.getAdvertisingData(...) should be replaced with
rgrover1	716:11b41f651697	408	* ble.gap().getAdvertisingPayload()(...).
rgrover1	716:11b41f651697	409	*/
rgrover1	716:11b41f651697	410	const GapAdvertisingData &getAdvertisingData(void) const {
rgrover1	716:11b41f651697	411	return gap().getAdvertisingPayload();
rgrover1	716:11b41f651697	412	}
rgrover1	716:11b41f651697	413
rgrover1	716:11b41f651697	414	/**
rgrover1	716:11b41f651697	415	* Reset any advertising payload prepared from prior calls to
rgrover1	716:11b41f651697	416	* accumulateAdvertisingPayload(). This automatically propagates the re-
rgrover1	716:11b41f651697	417	* initialized adv payload to the underlying stack.
rgrover1	716:11b41f651697	418	*
rgrover1	716:11b41f651697	419	* @note: This API is now deprecated and will be dropped in the future.
rgrover1	716:11b41f651697	420	* You should use the parallel API from Gap directly. A former call to
rgrover1	716:11b41f651697	421	* ble.clearAdvertisingPayload(...) should be replaced with
rgrover1	716:11b41f651697	422	* ble.gap().clearAdvertisingPayload(...).
rgrover1	716:11b41f651697	423	*/
rgrover1	716:11b41f651697	424	void clearAdvertisingPayload(void) {
rgrover1	716:11b41f651697	425	gap().clearAdvertisingPayload();
rgrover1	716:11b41f651697	426	}
rgrover1	716:11b41f651697	427
rgrover1	716:11b41f651697	428	/**
rgrover1	716:11b41f651697	429	* This API is deprecated and resolves to a no-operation. It is left here
rgrover1	716:11b41f651697	430	* to allow older code to compile. Please avoid using this API in new code.
rgrover1	716:11b41f651697	431	* This API will be dropped in a future release.
rgrover1	716:11b41f651697	432	*
rgrover1	716:11b41f651697	433	* Formerly, it would be used to dynamically reset the accumulated advertising
rgrover1	716:11b41f651697	434	* payload and scanResponse; to do this, the application would clear and re-
rgrover1	716:11b41f651697	435	* accumulate a new advertising payload (and scanResponse) before using this
rgrover1	716:11b41f651697	436	* API. Updates to the underlying advertisement payload now happen
rgrover1	716:11b41f651697	437	* implicitly.
rgrover1	716:11b41f651697	438	*/
rgrover1	716:11b41f651697	439	ble_error_t setAdvertisingPayload(void) {
rgrover1	716:11b41f651697	440	return BLE_ERROR_NONE;
rgrover1	716:11b41f651697	441	}
rgrover1	716:11b41f651697	442
rgrover1	716:11b41f651697	443	/**
rgrover1	716:11b41f651697	444	* Accumulate a variable length byte-stream as an AD structure in the
rgrover1	716:11b41f651697	445	* scanResponse payload.
rgrover1	716:11b41f651697	446	*
rgrover1	716:11b41f651697	447	* @param[in] type The type which describes the variable length data.
rgrover1	716:11b41f651697	448	* @param[in] data data bytes.
rgrover1	716:11b41f651697	449	* @param[in] len length of data.
rgrover1	716:11b41f651697	450	*
rgrover1	716:11b41f651697	451	* @note: This API is now deprecated and will be dropped in the future.
rgrover1	716:11b41f651697	452	* You should use the parallel API from Gap directly. A former call to
rgrover1	716:11b41f651697	453	* ble.accumulateScanResponse(...) should be replaced with
rgrover1	716:11b41f651697	454	* ble.gap().accumulateScanResponse(...).
rgrover1	716:11b41f651697	455	*/
rgrover1	716:11b41f651697	456	ble_error_t accumulateScanResponse(GapAdvertisingData::DataType type, const uint8_t *data, uint8_t len) {
rgrover1	716:11b41f651697	457	return gap().accumulateScanResponse(type, data, len);
rgrover1	716:11b41f651697	458	}
rgrover1	716:11b41f651697	459
rgrover1	716:11b41f651697	460	/**
rgrover1	716:11b41f651697	461	* Reset any scan response prepared from prior calls to
rgrover1	716:11b41f651697	462	* accumulateScanResponse().
rgrover1	716:11b41f651697	463	*
rgrover1	716:11b41f651697	464	* @note: This API is now deprecated and will be dropped in the future.
rgrover1	716:11b41f651697	465	* You should use the parallel API from Gap directly. A former call to
rgrover1	716:11b41f651697	466	* ble.clearScanResponse(...) should be replaced with
rgrover1	716:11b41f651697	467	* ble.gap().clearScanResponse(...).
rgrover1	716:11b41f651697	468	*/
rgrover1	716:11b41f651697	469	void clearScanResponse(void) {
rgrover1	716:11b41f651697	470	gap().clearScanResponse();
rgrover1	716:11b41f651697	471	}
rgrover1	716:11b41f651697	472
rgrover1	716:11b41f651697	473	/**
rgrover1	716:11b41f651697	474	* Start advertising.
rgrover1	716:11b41f651697	475	*
rgrover1	716:11b41f651697	476	* @note: This API is now deprecated and will be dropped in the future.
rgrover1	716:11b41f651697	477	* You should use the parallel API from Gap directly. A former call to
rgrover1	716:11b41f651697	478	* ble.startAdvertising(...) should be replaced with
rgrover1	716:11b41f651697	479	* ble.gap().startAdvertising(...).
rgrover1	716:11b41f651697	480	*/
rgrover1	716:11b41f651697	481	ble_error_t startAdvertising(void) {
rgrover1	716:11b41f651697	482	return gap().startAdvertising();
rgrover1	716:11b41f651697	483	}
rgrover1	716:11b41f651697	484
rgrover1	716:11b41f651697	485	/**
rgrover1	716:11b41f651697	486	* Stop advertising.
rgrover1	716:11b41f651697	487	*
rgrover1	716:11b41f651697	488	* @note: This API is now deprecated and will be dropped in the future.
rgrover1	716:11b41f651697	489	* You should use the parallel API from Gap directly. A former call to
rgrover1	716:11b41f651697	490	* ble.stopAdvertising(...) should be replaced with
rgrover1	716:11b41f651697	491	* ble.gap().stopAdvertising(...).
rgrover1	716:11b41f651697	492	*/
rgrover1	716:11b41f651697	493	ble_error_t stopAdvertising(void) {
rgrover1	716:11b41f651697	494	return gap().stopAdvertising();
rgrover1	716:11b41f651697	495	}
rgrover1	716:11b41f651697	496
rgrover1	716:11b41f651697	497	/**
rgrover1	716:11b41f651697	498	* Setup parameters for GAP scanning--i.e. observer mode.
rgrover1	716:11b41f651697	499	* @param[in] interval
rgrover1	716:11b41f651697	500	* Scan interval (in milliseconds) [valid values lie between 2.5ms and 10.24s].
rgrover1	716:11b41f651697	501	* @param[in] window
rgrover1	716:11b41f651697	502	* Scan Window (in milliseconds) [valid values lie between 2.5ms and 10.24s].
rgrover1	716:11b41f651697	503	* @param[in] timeout
rgrover1	716:11b41f651697	504	* Scan timeout (in seconds) between 0x0001 and 0xFFFF, 0x0000 disables timeout.
rgrover1	716:11b41f651697	505	* @param[in] activeScanning
rgrover1	716:11b41f651697	506	* Set to True if active-scanning is required. This is used to fetch the
rgrover1	716:11b41f651697	507	* scan response from a peer if possible.
rgrover1	716:11b41f651697	508	*
rgrover1	716:11b41f651697	509	* The scanning window divided by the interval determines the duty cycle for
rgrover1	716:11b41f651697	510	* scanning. For example, if the interval is 100ms and the window is 10ms,
rgrover1	716:11b41f651697	511	* then the controller will scan for 10 percent of the time. It is possible
rgrover1	716:11b41f651697	512	* to have the interval and window set to the same value. In this case,
rgrover1	716:11b41f651697	513	* scanning is continuous, with a change of scanning frequency once every
rgrover1	716:11b41f651697	514	* interval.
rgrover1	716:11b41f651697	515	*
rgrover1	716:11b41f651697	516	* Once the scanning parameters have been configured, scanning can be
rgrover1	716:11b41f651697	517	* enabled by using startScan().
rgrover1	716:11b41f651697	518	*
rgrover1	716:11b41f651697	519	* @Note: The scan interval and window are recommendations to the BLE stack.
rgrover1	716:11b41f651697	520	*
rgrover1	716:11b41f651697	521	* @note: This API is now deprecated and will be dropped in the future.
rgrover1	716:11b41f651697	522	* You should use the parallel API from Gap directly. A former call to
rgrover1	716:11b41f651697	523	* ble.setScanParams(...) should be replaced with
rgrover1	716:11b41f651697	524	* ble.gap().setScanParams(...).
rgrover1	716:11b41f651697	525	*/
rgrover1	716:11b41f651697	526	ble_error_t setScanParams(uint16_t interval = GapScanningParams::SCAN_INTERVAL_MAX,
rgrover1	716:11b41f651697	527	uint16_t window = GapScanningParams::SCAN_WINDOW_MAX,
rgrover1	716:11b41f651697	528	uint16_t timeout = 0,
rgrover1	716:11b41f651697	529	bool activeScanning = false) {
rgrover1	716:11b41f651697	530	return gap().setScanParams(interval, window, timeout, activeScanning);
rgrover1	716:11b41f651697	531	}
rgrover1	716:11b41f651697	532
rgrover1	716:11b41f651697	533	/**
rgrover1	716:11b41f651697	534	* Setup the scanInterval parameter for GAP scanning--i.e. observer mode.
rgrover1	716:11b41f651697	535	* @param[in] interval
rgrover1	716:11b41f651697	536	* Scan interval (in milliseconds) [valid values lie between 2.5ms and 10.24s].
rgrover1	716:11b41f651697	537	*
rgrover1	716:11b41f651697	538	* The scanning window divided by the interval determines the duty cycle for
rgrover1	716:11b41f651697	539	* scanning. For example, if the interval is 100ms and the window is 10ms,
rgrover1	716:11b41f651697	540	* then the controller will scan for 10 percent of the time. It is possible
rgrover1	716:11b41f651697	541	* to have the interval and window set to the same value. In this case,
rgrover1	716:11b41f651697	542	* scanning is continuous, with a change of scanning frequency once every
rgrover1	716:11b41f651697	543	* interval.
rgrover1	716:11b41f651697	544	*
rgrover1	716:11b41f651697	545	* Once the scanning parameters have been configured, scanning can be
rgrover1	716:11b41f651697	546	* enabled by using startScan().
rgrover1	716:11b41f651697	547	*
rgrover1	716:11b41f651697	548	* @note: This API is now deprecated and will be dropped in the future.
rgrover1	716:11b41f651697	549	* You should use the parallel API from Gap directly. A former call to
rgrover1	716:11b41f651697	550	* ble.setScanInterval(interval) should be replaced with
rgrover1	716:11b41f651697	551	* ble.gap().setScanInterval(interval).
rgrover1	716:11b41f651697	552	*/
rgrover1	716:11b41f651697	553	ble_error_t setScanInterval(uint16_t interval) {
rgrover1	716:11b41f651697	554	return gap().setScanInterval(interval);
rgrover1	716:11b41f651697	555	}
rgrover1	716:11b41f651697	556
rgrover1	716:11b41f651697	557	/**
rgrover1	716:11b41f651697	558	* Setup the scanWindow parameter for GAP scanning--i.e. observer mode.
rgrover1	716:11b41f651697	559	* @param[in] window
rgrover1	716:11b41f651697	560	* Scan Window (in milliseconds) [valid values lie between 2.5ms and 10.24s].
rgrover1	716:11b41f651697	561	*
rgrover1	716:11b41f651697	562	* The scanning window divided by the interval determines the duty cycle for
rgrover1	716:11b41f651697	563	* scanning. For example, if the interval is 100ms and the window is 10ms,
rgrover1	716:11b41f651697	564	* then the controller will scan for 10 percent of the time. It is possible
rgrover1	716:11b41f651697	565	* to have the interval and window set to the same value. In this case,
rgrover1	716:11b41f651697	566	* scanning is continuous, with a change of scanning frequency once every
rgrover1	716:11b41f651697	567	* interval.
rgrover1	716:11b41f651697	568	*
rgrover1	716:11b41f651697	569	* Once the scanning parameters have been configured, scanning can be
rgrover1	716:11b41f651697	570	* enabled by using startScan().
rgrover1	716:11b41f651697	571	*
rgrover1	716:11b41f651697	572	* @note: This API is now deprecated and will be dropped in the future.
rgrover1	716:11b41f651697	573	* You should use the parallel API from Gap directly. A former call to
rgrover1	716:11b41f651697	574	* ble.setScanWindow(window) should be replaced with
rgrover1	716:11b41f651697	575	* ble.gap().setScanWindow(window).
rgrover1	716:11b41f651697	576	*/
rgrover1	716:11b41f651697	577	ble_error_t setScanWindow(uint16_t window) {
rgrover1	716:11b41f651697	578	return gap().setScanWindow(window);
rgrover1	716:11b41f651697	579	}
rgrover1	716:11b41f651697	580
rgrover1	716:11b41f651697	581	/**
rgrover1	716:11b41f651697	582	* Setup parameters for GAP scanning--i.e. observer mode.
rgrover1	716:11b41f651697	583	* @param[in] timeout
rgrover1	716:11b41f651697	584	* Scan timeout (in seconds) between 0x0001 and 0xFFFF, 0x0000 disables timeout.
rgrover1	716:11b41f651697	585	*
rgrover1	716:11b41f651697	586	* The scanning window divided by the interval determines the duty cycle for
rgrover1	716:11b41f651697	587	* scanning. For example, if the interval is 100ms and the window is 10ms,
rgrover1	716:11b41f651697	588	* then the controller will scan for 10 percent of the time. It is possible
rgrover1	716:11b41f651697	589	* to have the interval and window set to the same value. In this case,
rgrover1	716:11b41f651697	590	* scanning is continuous, with a change of scanning frequency once every
rgrover1	716:11b41f651697	591	* interval.
rgrover1	716:11b41f651697	592	*
rgrover1	716:11b41f651697	593	* Once the scanning parameters have been configured, scanning can be
rgrover1	716:11b41f651697	594	* enabled by using startScan().
rgrover1	716:11b41f651697	595	*
rgrover1	716:11b41f651697	596	* @Note: The scan interval and window are recommendations to the BLE stack.
rgrover1	716:11b41f651697	597	*
rgrover1	716:11b41f651697	598	* @note: This API is now deprecated and will be dropped in the future.
rgrover1	716:11b41f651697	599	* You should use the parallel API from Gap directly. A former call to
rgrover1	716:11b41f651697	600	* ble.setScanTimeout(...) should be replaced with
rgrover1	716:11b41f651697	601	* ble.gap().setScanTimeout(...).
rgrover1	716:11b41f651697	602	*/
rgrover1	716:11b41f651697	603	ble_error_t setScanTimeout(uint16_t timeout) {
rgrover1	716:11b41f651697	604	return gap().setScanTimeout(timeout);
rgrover1	716:11b41f651697	605	}
rgrover1	716:11b41f651697	606
rgrover1	716:11b41f651697	607	/**
rgrover1	716:11b41f651697	608	* Setup parameters for GAP scanning--i.e. observer mode.
rgrover1	716:11b41f651697	609	* @param[in] activeScanning
rgrover1	716:11b41f651697	610	* Set to True if active-scanning is required. This is used to fetch the
rgrover1	716:11b41f651697	611	* scan response from a peer if possible.
rgrover1	716:11b41f651697	612	*
rgrover1	716:11b41f651697	613	* Once the scanning parameters have been configured, scanning can be
rgrover1	716:11b41f651697	614	* enabled by using startScan().
rgrover1	716:11b41f651697	615	*
rgrover1	716:11b41f651697	616	* @note: This API is now deprecated and will be dropped in the future.
rgrover1	716:11b41f651697	617	* You should use the parallel API from Gap directly. A former call to
rgrover1	716:11b41f651697	618	* ble.setActiveScan(...) should be replaced with
rgrover1	716:11b41f651697	619	* ble.gap().setActiveScanning(...).
rgrover1	716:11b41f651697	620	*/
rgrover1	716:11b41f651697	621	void setActiveScan(bool activeScanning) {
rgrover1	716:11b41f651697	622	gap().setActiveScanning(activeScanning);
rgrover1	716:11b41f651697	623	}
rgrover1	716:11b41f651697	624
rgrover1	716:11b41f651697	625	/**
rgrover1	716:11b41f651697	626	* Start scanning (Observer Procedure) based on the parameters currently in
rgrover1	716:11b41f651697	627	* effect.
rgrover1	716:11b41f651697	628	*
rgrover1	716:11b41f651697	629	* @param[in] callback
rgrover1	716:11b41f651697	630	* The application specific callback to be invoked upon
rgrover1	716:11b41f651697	631	* receiving every advertisement report. This can be passed in
rgrover1	716:11b41f651697	632	* as NULL, in which case scanning may not be enabled at all.
rgrover1	716:11b41f651697	633	*
rgrover1	716:11b41f651697	634	* @note: This API is now deprecated and will be dropped in the future.
rgrover1	716:11b41f651697	635	* You should use the parallel API from Gap directly. A former call to
rgrover1	716:11b41f651697	636	* ble.startScan(callback) should be replaced with
rgrover1	716:11b41f651697	637	* ble.gap().startScan(callback).
rgrover1	716:11b41f651697	638	*/
rgrover1	716:11b41f651697	639	ble_error_t startScan(void (callback)(const Gap::AdvertisementCallbackParams_t params)) {
rgrover1	716:11b41f651697	640	return gap().startScan(callback);
rgrover1	716:11b41f651697	641	}
rgrover1	716:11b41f651697	642
rgrover1	716:11b41f651697	643	/**
rgrover1	716:11b41f651697	644	* Same as above, but this takes an (object, method) pair for a callback.
rgrover1	716:11b41f651697	645	*
rgrover1	716:11b41f651697	646	* @note: This API is now deprecated and will be dropped in the future.
rgrover1	716:11b41f651697	647	* You should use the parallel API from Gap directly. A former call to
rgrover1	716:11b41f651697	648	* ble.startScan(callback) should be replaced with
rgrover1	716:11b41f651697	649	* ble.gap().startScan(object, callback).
rgrover1	716:11b41f651697	650	*/
rgrover1	716:11b41f651697	651	template<typename T>
rgrover1	716:11b41f651697	652	ble_error_t startScan(T object, void (T::memberCallback)(const Gap::AdvertisementCallbackParams_t *params));
rgrover1	716:11b41f651697	653
rgrover1	716:11b41f651697	654	/**
rgrover1	716:11b41f651697	655	* Stop scanning. The current scanning parameters remain in effect.
rgrover1	716:11b41f651697	656	*
rgrover1	716:11b41f651697	657	* @retval BLE_ERROR_NONE if successfully stopped scanning procedure.
rgrover1	716:11b41f651697	658	*
rgrover1	716:11b41f651697	659	* @note: This API is now deprecated and will be dropped in the future.
rgrover1	716:11b41f651697	660	* You should use the parallel API from Gap directly. A former call to
rgrover1	716:11b41f651697	661	* ble.stopScan() should be replaced with
rgrover1	716:11b41f651697	662	* ble.gap().stopScan().
rgrover1	716:11b41f651697	663	*/
rgrover1	716:11b41f651697	664	ble_error_t stopScan(void) {
rgrover1	716:11b41f651697	665	return gap().stopScan();
rgrover1	716:11b41f651697	666	}
rgrover1	716:11b41f651697	667
rgrover1	716:11b41f651697	668	/**
rgrover1	716:11b41f651697	669	* Create a connection (GAP Link Establishment).
rgrover1	716:11b41f651697	670	* @param peerAddr
rgrover1	716:11b41f651697	671	* 48-bit address, LSB format.
rgrover1	716:11b41f651697	672	* @param peerAddrType
rgrover1	716:11b41f651697	673	* Address type of the peer.
rgrover1	716:11b41f651697	674	* @param connectionParams
rgrover1	716:11b41f651697	675	* Connection parameters.
rgrover1	716:11b41f651697	676	* @param scanParams
rgrover1	716:11b41f651697	677	* Paramters to be used while scanning for the peer.
rgrover1	716:11b41f651697	678	* @return BLE_ERROR_NONE if connection establishment procedure is started
rgrover1	716:11b41f651697	679	* successfully. The onConnection callback (if set) will be invoked upon
rgrover1	716:11b41f651697	680	* a connection event.
rgrover1	716:11b41f651697	681	*
rgrover1	716:11b41f651697	682	* @note: This API is now deprecated and will be dropped in the future.
rgrover1	716:11b41f651697	683	* You should use the parallel API from Gap directly. A former call to
rgrover1	716:11b41f651697	684	* ble.connect(...) should be replaced with
rgrover1	716:11b41f651697	685	* ble.gap().connect(...).
rgrover1	716:11b41f651697	686	*/
rgrover1	716:11b41f651697	687	ble_error_t connect(const Gap::Address_t peerAddr,
rgrover1	716:11b41f651697	688	Gap::AddressType_t peerAddrType = Gap::ADDR_TYPE_RANDOM_STATIC,
rgrover1	716:11b41f651697	689	const Gap::ConnectionParams_t *connectionParams = NULL,
rgrover1	716:11b41f651697	690	const GapScanningParams *scanParams = NULL) {
rgrover1	716:11b41f651697	691	return gap().connect(peerAddr, peerAddrType, connectionParams, scanParams);
rgrover1	716:11b41f651697	692	}
rgrover1	716:11b41f651697	693
rgrover1	716:11b41f651697	694	/**
rgrover1	716:11b41f651697	695	* This call initiates the disconnection procedure, and its completion will
rgrover1	716:11b41f651697	696	* be communicated to the application with an invocation of the
rgrover1	716:11b41f651697	697	* onDisconnection callback.
rgrover1	716:11b41f651697	698	*
rgrover1	716:11b41f651697	699	* @param[in] connectionHandle
rgrover1	716:11b41f651697	700	* @param[in] reason
rgrover1	716:11b41f651697	701	* The reason for disconnection to be sent back to the peer.
rgrover1	716:11b41f651697	702	*/
rgrover1	716:11b41f651697	703	ble_error_t disconnect(Gap::Handle_t connectionHandle, Gap::DisconnectionReason_t reason) {
rgrover1	716:11b41f651697	704	return gap().disconnect(connectionHandle, reason);
rgrover1	716:11b41f651697	705	}
rgrover1	716:11b41f651697	706
rgrover1	716:11b41f651697	707	/**
rgrover1	716:11b41f651697	708	* This call initiates the disconnection procedure, and its completion will
rgrover1	716:11b41f651697	709	* be communicated to the application with an invocation of the
rgrover1	716:11b41f651697	710	* onDisconnection callback.
rgrover1	716:11b41f651697	711	*
rgrover1	716:11b41f651697	712	* @param reason
rgrover1	716:11b41f651697	713	* The reason for disconnection to be sent back to the peer.
rgrover1	716:11b41f651697	714	*
rgrover1	716:11b41f651697	715	* @note: This API is now deprecated and will be dropped in the future.
rgrover1	716:11b41f651697	716	* You should use the parallel API from Gap directly. A former call to
rgrover1	716:11b41f651697	717	* ble.disconnect(reason) should be replaced with
rgrover1	716:11b41f651697	718	* ble.gap().disconnect(reason).
rgrover1	716:11b41f651697	719	*
rgrover1	716:11b41f651697	720	* @note: this version of disconnect() doesn't take a connection handle. It
rgrover1	716:11b41f651697	721	* will work reliably only for stacks which are limited to a single
rgrover1	716:11b41f651697	722	* connection. This API should be considered deprecated in favour of the
rgrover1	716:11b41f651697	723	* alternative which takes a connection handle. It will be dropped in the future.
rgrover1	716:11b41f651697	724	*/
rgrover1	716:11b41f651697	725	ble_error_t disconnect(Gap::DisconnectionReason_t reason) {
rgrover1	716:11b41f651697	726	return gap().disconnect(reason);
rgrover1	716:11b41f651697	727	}
rgrover1	716:11b41f651697	728
rgrover1	716:11b41f651697	729	/**
rgrover1	716:11b41f651697	730	* Returns the current GAP state of the device using a bitmask which
rgrover1	716:11b41f651697	731	* describes whether the device is advertising and/or connected.
rgrover1	716:11b41f651697	732	*
rgrover1	716:11b41f651697	733	* @note: This API is now deprecated and will be dropped in the future.
rgrover1	716:11b41f651697	734	* You should use the parallel API from Gap directly. A former call to
rgrover1	716:11b41f651697	735	* ble.getGapState() should be replaced with
rgrover1	716:11b41f651697	736	* ble.gap().getState().
rgrover1	716:11b41f651697	737	*/
rgrover1	716:11b41f651697	738	Gap::GapState_t getGapState(void) const {
rgrover1	716:11b41f651697	739	return gap().getState();
rgrover1	716:11b41f651697	740	}
rgrover1	716:11b41f651697	741
rgrover1	716:11b41f651697	742	/**
rgrover1	716:11b41f651697	743	* Get the GAP peripheral preferred connection parameters. These are the
rgrover1	716:11b41f651697	744	* defaults that the peripheral would like to have in a connection. The
rgrover1	716:11b41f651697	745	* choice of the connection parameters is eventually up to the central.
rgrover1	716:11b41f651697	746	*
rgrover1	716:11b41f651697	747	* @param[out] params
rgrover1	716:11b41f651697	748	* The structure where the parameters will be stored. Memory
rgrover1	716:11b41f651697	749	* for this is owned by the caller.
rgrover1	716:11b41f651697	750	*
rgrover1	716:11b41f651697	751	* @return BLE_ERROR_NONE if the parameters were successfully filled into
rgrover1	716:11b41f651697	752	* the given structure pointed to by params.
rgrover1	716:11b41f651697	753	*
rgrover1	716:11b41f651697	754	* @note: This API is now deprecated and will be dropped in the future.
rgrover1	716:11b41f651697	755	* You should use the parallel API from Gap directly. A former call to
rgrover1	716:11b41f651697	756	* ble.getPreferredConnectionParams() should be replaced with
rgrover1	716:11b41f651697	757	* ble.gap().getPreferredConnectionParams().
rgrover1	716:11b41f651697	758	*/
rgrover1	716:11b41f651697	759	ble_error_t getPreferredConnectionParams(Gap::ConnectionParams_t *params) {
rgrover1	716:11b41f651697	760	return gap().getPreferredConnectionParams(params);
rgrover1	716:11b41f651697	761	}
rgrover1	716:11b41f651697	762
rgrover1	716:11b41f651697	763	/**
rgrover1	716:11b41f651697	764	* Set the GAP peripheral preferred connection parameters. These are the
rgrover1	716:11b41f651697	765	* defaults that the peripheral would like to have in a connection. The
rgrover1	716:11b41f651697	766	* choice of the connection parameters is eventually up to the central.
rgrover1	716:11b41f651697	767	*
rgrover1	716:11b41f651697	768	* @param[in] params
rgrover1	716:11b41f651697	769	* The structure containing the desired parameters.
rgrover1	716:11b41f651697	770	*
rgrover1	716:11b41f651697	771	* @note: This API is now deprecated and will be dropped in the future.
rgrover1	716:11b41f651697	772	* You should use the parallel API from Gap directly. A former call to
rgrover1	716:11b41f651697	773	* ble.setPreferredConnectionParams() should be replaced with
rgrover1	716:11b41f651697	774	* ble.gap().setPreferredConnectionParams().
rgrover1	716:11b41f651697	775	*/
rgrover1	716:11b41f651697	776	ble_error_t setPreferredConnectionParams(const Gap::ConnectionParams_t *params) {
rgrover1	716:11b41f651697	777	return gap().setPreferredConnectionParams(params);
rgrover1	716:11b41f651697	778	}
rgrover1	716:11b41f651697	779
rgrover1	716:11b41f651697	780	/**
rgrover1	716:11b41f651697	781	* Update connection parameters while in the peripheral role.
rgrover1	716:11b41f651697	782	* @details In the peripheral role, this will send the corresponding L2CAP request to the connected peer and wait for
rgrover1	716:11b41f651697	783	* the central to perform the procedure.
rgrover1	716:11b41f651697	784	* @param[in] handle
rgrover1	716:11b41f651697	785	* Connection Handle
rgrover1	716:11b41f651697	786	* @param[in] params
rgrover1	716:11b41f651697	787	* Pointer to desired connection parameters. If NULL is provided on a peripheral role,
rgrover1	716:11b41f651697	788	* the parameters in the PPCP characteristic of the GAP service will be used instead.
rgrover1	716:11b41f651697	789	*
rgrover1	716:11b41f651697	790	* @note: This API is now deprecated and will be dropped in the future.
rgrover1	716:11b41f651697	791	* You should use the parallel API from Gap directly. A former call to
rgrover1	716:11b41f651697	792	* ble.updateConnectionParams() should be replaced with
rgrover1	716:11b41f651697	793	* ble.gap().updateConnectionParams().
rgrover1	716:11b41f651697	794	*/
rgrover1	716:11b41f651697	795	ble_error_t updateConnectionParams(Gap::Handle_t handle, const Gap::ConnectionParams_t *params) {
rgrover1	716:11b41f651697	796	return gap().updateConnectionParams(handle, params);
rgrover1	716:11b41f651697	797	}
rgrover1	716:11b41f651697	798
rgrover1	716:11b41f651697	799	/**
rgrover1	716:11b41f651697	800	* Set the device name characteristic in the GAP service.
rgrover1	716:11b41f651697	801	* @param[in] deviceName
rgrover1	716:11b41f651697	802	* The new value for the device-name. This is a UTF-8 encoded, <b>NULL-terminated</b> string.
rgrover1	716:11b41f651697	803	*
rgrover1	716:11b41f651697	804	* @note: This API is now deprecated and will be dropped in the future.
rgrover1	716:11b41f651697	805	* You should use the parallel API from Gap directly. A former call to
rgrover1	716:11b41f651697	806	* ble.setDeviceName() should be replaced with
rgrover1	716:11b41f651697	807	* ble.gap().setDeviceName().
rgrover1	716:11b41f651697	808	*/
rgrover1	716:11b41f651697	809	ble_error_t setDeviceName(const uint8_t *deviceName) {
rgrover1	716:11b41f651697	810	return gap().setDeviceName(deviceName);
rgrover1	716:11b41f651697	811	}
rgrover1	716:11b41f651697	812
rgrover1	716:11b41f651697	813	/**
rgrover1	716:11b41f651697	814	* Get the value of the device name characteristic in the GAP service.
rgrover1	716:11b41f651697	815	* @param[out] deviceName
rgrover1	716:11b41f651697	816	* Pointer to an empty buffer where the UTF-8 *non NULL-
rgrover1	716:11b41f651697	817	* terminated* string will be placed. Set this
rgrover1	716:11b41f651697	818	* value to NULL in order to obtain the deviceName-length
rgrover1	716:11b41f651697	819	* from the 'length' parameter.
rgrover1	716:11b41f651697	820	*
rgrover1	716:11b41f651697	821	* @param[in/out] lengthP
rgrover1	716:11b41f651697	822	* (on input) Length of the buffer pointed to by deviceName;
rgrover1	716:11b41f651697	823	* (on output) the complete device name length (without the
rgrover1	716:11b41f651697	824	* null terminator).
rgrover1	716:11b41f651697	825	*
rgrover1	716:11b41f651697	826	* @note If the device name is longer than the size of the supplied buffer,
rgrover1	716:11b41f651697	827	* length will return the complete device name length, and not the
rgrover1	716:11b41f651697	828	* number of bytes actually returned in deviceName. The application may
rgrover1	716:11b41f651697	829	* use this information to retry with a suitable buffer size.
rgrover1	716:11b41f651697	830	*
rgrover1	716:11b41f651697	831	* @note: This API is now deprecated and will be dropped in the future.
rgrover1	716:11b41f651697	832	* You should use the parallel API from Gap directly. A former call to
rgrover1	716:11b41f651697	833	* ble.getDeviceName() should be replaced with
rgrover1	716:11b41f651697	834	* ble.gap().getDeviceName().
rgrover1	716:11b41f651697	835	*/
rgrover1	716:11b41f651697	836	ble_error_t getDeviceName(uint8_t deviceName, unsigned lengthP) {
rgrover1	716:11b41f651697	837	return gap().getDeviceName(deviceName, lengthP);
rgrover1	716:11b41f651697	838	}
rgrover1	716:11b41f651697	839
rgrover1	716:11b41f651697	840	/**
rgrover1	716:11b41f651697	841	* Set the appearance characteristic in the GAP service.
rgrover1	716:11b41f651697	842	* @param[in] appearance
rgrover1	716:11b41f651697	843	* The new value for the device-appearance.
rgrover1	716:11b41f651697	844	*
rgrover1	716:11b41f651697	845	* @note: This API is now deprecated and will be dropped in the future.
rgrover1	716:11b41f651697	846	* You should use the parallel API from Gap directly. A former call to
rgrover1	716:11b41f651697	847	* ble.setAppearance() should be replaced with
rgrover1	716:11b41f651697	848	* ble.gap().setAppearance().
rgrover1	716:11b41f651697	849	*/
rgrover1	716:11b41f651697	850	ble_error_t setAppearance(GapAdvertisingData::Appearance appearance) {
rgrover1	716:11b41f651697	851	return gap().setAppearance(appearance);
rgrover1	716:11b41f651697	852	}
rgrover1	716:11b41f651697	853
rgrover1	716:11b41f651697	854	/**
rgrover1	716:11b41f651697	855	* Get the appearance characteristic in the GAP service.
rgrover1	716:11b41f651697	856	* @param[out] appearance
rgrover1	716:11b41f651697	857	* The new value for the device-appearance.
rgrover1	716:11b41f651697	858	*
rgrover1	716:11b41f651697	859	* @note: This API is now deprecated and will be dropped in the future.
rgrover1	716:11b41f651697	860	* You should use the parallel API from Gap directly. A former call to
rgrover1	716:11b41f651697	861	* ble.getAppearance() should be replaced with
rgrover1	716:11b41f651697	862	* ble.gap().getAppearance().
rgrover1	716:11b41f651697	863	*/
rgrover1	716:11b41f651697	864	ble_error_t getAppearance(GapAdvertisingData::Appearance *appearanceP) {
rgrover1	716:11b41f651697	865	return gap().getAppearance(appearanceP);
rgrover1	716:11b41f651697	866	}
rgrover1	716:11b41f651697	867
rgrover1	716:11b41f651697	868	/**
rgrover1	716:11b41f651697	869	* Set the radio's transmit power.
rgrover1	716:11b41f651697	870	* @param[in] txPower Radio transmit power in dBm.
rgrover1	716:11b41f651697	871	*
rgrover1	716:11b41f651697	872	* @note: This API is now deprecated and will be dropped in the future.
rgrover1	716:11b41f651697	873	* You should use the parallel API from Gap directly. A former call to
rgrover1	716:11b41f651697	874	* ble.setTxPower() should be replaced with
rgrover1	716:11b41f651697	875	* ble.gap().setTxPower().
rgrover1	716:11b41f651697	876	*/
rgrover1	716:11b41f651697	877	ble_error_t setTxPower(int8_t txPower) {
rgrover1	716:11b41f651697	878	return gap().setTxPower(txPower);
rgrover1	716:11b41f651697	879	}
rgrover1	716:11b41f651697	880
rgrover1	716:11b41f651697	881	/**
rgrover1	716:11b41f651697	882	* Query the underlying stack for permitted arguments for setTxPower().
rgrover1	716:11b41f651697	883	*
rgrover1	716:11b41f651697	884	* @param[out] valueArrayPP
rgrover1	716:11b41f651697	885	* Out parameter to receive the immutable array of Tx values.
rgrover1	716:11b41f651697	886	* @param[out] countP
rgrover1	716:11b41f651697	887	* Out parameter to receive the array's size.
rgrover1	716:11b41f651697	888	*
rgrover1	716:11b41f651697	889	* @note: This API is now deprecated and will be dropped in the future.
rgrover1	716:11b41f651697	890	* You should use the parallel API from Gap directly. A former call to
rgrover1	716:11b41f651697	891	* ble.getPermittedTxPowerValues() should be replaced with
rgrover1	716:11b41f651697	892	* ble.gap().getPermittedTxPowerValues().
rgrover1	716:11b41f651697	893	*/
rgrover1	716:11b41f651697	894	void getPermittedTxPowerValues(const int8_t *valueArrayPP, size_t countP) {
rgrover1	716:11b41f651697	895	gap().getPermittedTxPowerValues(valueArrayPP, countP);
rgrover1	716:11b41f651697	896	}
rgrover1	716:11b41f651697	897
rgrover1	716:11b41f651697	898	/**
rgrover1	716:11b41f651697	899	* Add a service declaration to the local server ATT table. Also add the
rgrover1	716:11b41f651697	900	* characteristics contained within.
rgrover1	716:11b41f651697	901	*
rgrover1	716:11b41f651697	902	* @note: This API is now deprecated and will be dropped in the future.
rgrover1	716:11b41f651697	903	* You should use the parallel API from GattServer directly. A former call
rgrover1	716:11b41f651697	904	* to ble.addService() should be replaced with
rgrover1	716:11b41f651697	905	* ble.gattServer().addService().
rgrover1	716:11b41f651697	906	*/
rgrover1	716:11b41f651697	907	ble_error_t addService(GattService &service) {
rgrover1	716:11b41f651697	908	return gattServer().addService(service);
rgrover1	716:11b41f651697	909	}
rgrover1	716:11b41f651697	910
rgrover1	716:11b41f651697	911	/**
rgrover1	716:11b41f651697	912	* Read the value of a characteristic from the local GattServer
rgrover1	716:11b41f651697	913	* @param[in] attributeHandle
rgrover1	716:11b41f651697	914	* Attribute handle for the value attribute of the characteristic.
rgrover1	716:11b41f651697	915	* @param[out] buffer
rgrover1	716:11b41f651697	916	* A buffer to hold the value being read.
rgrover1	716:11b41f651697	917	* @param[in/out] lengthP
rgrover1	716:11b41f651697	918	* Length of the buffer being supplied. If the attribute
rgrover1	716:11b41f651697	919	* value is longer than the size of the supplied buffer,
rgrover1	716:11b41f651697	920	* this variable will hold upon return the total attribute value length
rgrover1	716:11b41f651697	921	* (excluding offset). The application may use this
rgrover1	716:11b41f651697	922	* information to allocate a suitable buffer size.
rgrover1	716:11b41f651697	923	*
rgrover1	716:11b41f651697	924	* @return BLE_ERROR_NONE if a value was read successfully into the buffer.
rgrover1	716:11b41f651697	925	*
rgrover1	716:11b41f651697	926	* @note: This API is now deprecated and will be dropped in the future.
rgrover1	716:11b41f651697	927	* You should use the parallel API from GattServer directly. A former call
rgrover1	716:11b41f651697	928	* to ble.readCharacteristicValue() should be replaced with
rgrover1	716:11b41f651697	929	* ble.gattServer().read().
rgrover1	716:11b41f651697	930	*/
rgrover1	716:11b41f651697	931	ble_error_t readCharacteristicValue(GattAttribute::Handle_t attributeHandle, uint8_t buffer, uint16_t lengthP) {
rgrover1	716:11b41f651697	932	return gattServer().read(attributeHandle, buffer, lengthP);
rgrover1	716:11b41f651697	933	}
rgrover1	716:11b41f651697	934
rgrover1	716:11b41f651697	935	/**
rgrover1	716:11b41f651697	936	* Read the value of a characteristic from the local GattServer
rgrover1	716:11b41f651697	937	* @param[in] connectionHandle
rgrover1	716:11b41f651697	938	* Connection Handle.
rgrover1	716:11b41f651697	939	* @param[in] attributeHandle
rgrover1	716:11b41f651697	940	* Attribute handle for the value attribute of the characteristic.
rgrover1	716:11b41f651697	941	* @param[out] buffer
rgrover1	716:11b41f651697	942	* A buffer to hold the value being read.
rgrover1	716:11b41f651697	943	* @param[in/out] lengthP
rgrover1	716:11b41f651697	944	* Length of the buffer being supplied. If the attribute
rgrover1	716:11b41f651697	945	* value is longer than the size of the supplied buffer,
rgrover1	716:11b41f651697	946	* this variable will hold upon return the total attribute value length
rgrover1	716:11b41f651697	947	* (excluding offset). The application may use this
rgrover1	716:11b41f651697	948	* information to allocate a suitable buffer size.
rgrover1	716:11b41f651697	949	*
rgrover1	716:11b41f651697	950	* @return BLE_ERROR_NONE if a value was read successfully into the buffer.
rgrover1	716:11b41f651697	951	*
rgrover1	716:11b41f651697	952	* @note This API is a version of above with an additional connection handle
rgrover1	716:11b41f651697	953	* parameter to allow fetches for connection-specific multivalued
rgrover1	733:718a3566b4ce	954	* attributes (such as the CCCDs).
rgrover1	716:11b41f651697	955	*
rgrover1	716:11b41f651697	956	* @note: This API is now deprecated and will be dropped in the future.
rgrover1	716:11b41f651697	957	* You should use the parallel API from GattServer directly. A former call
rgrover1	716:11b41f651697	958	* to ble.readCharacteristicValue() should be replaced with
rgrover1	716:11b41f651697	959	* ble.gattServer().read().
rgrover1	716:11b41f651697	960	*/
rgrover1	716:11b41f651697	961	ble_error_t readCharacteristicValue(Gap::Handle_t connectionHandle, GattAttribute::Handle_t attributeHandle, uint8_t buffer, uint16_t lengthP) {
rgrover1	716:11b41f651697	962	return gattServer().read(connectionHandle, attributeHandle, buffer, lengthP);
rgrover1	716:11b41f651697	963	}
rgrover1	716:11b41f651697	964
rgrover1	716:11b41f651697	965	/**
rgrover1	716:11b41f651697	966	* Update the value of a characteristic on the local GattServer.
rgrover1	716:11b41f651697	967	*
rgrover1	716:11b41f651697	968	* @param[in] attributeHandle
rgrover1	716:11b41f651697	969	* Handle for the value attribute of the Characteristic.
rgrover1	716:11b41f651697	970	* @param[in] value
rgrover1	716:11b41f651697	971	* A pointer to a buffer holding the new value
rgrover1	716:11b41f651697	972	* @param[in] size
rgrover1	716:11b41f651697	973	* Size of the new value (in bytes).
rgrover1	716:11b41f651697	974	* @param[in] localOnly
rgrover1	716:11b41f651697	975	* Should this update be kept on the local
rgrover1	716:11b41f651697	976	* GattServer regardless of the state of the
rgrover1	716:11b41f651697	977	* notify/indicate flag in the CCCD for this
rgrover1	716:11b41f651697	978	* Characteristic? If set to true, no notification
rgrover1	716:11b41f651697	979	* or indication is generated.
rgrover1	716:11b41f651697	980	*
rgrover1	716:11b41f651697	981	* @return BLE_ERROR_NONE if we have successfully set the value of the attribute.
rgrover1	716:11b41f651697	982	*
rgrover1	716:11b41f651697	983	* @note: This API is now deprecated and will be dropped in the future.
rgrover1	716:11b41f651697	984	* You should use the parallel API from GattServer directly. A former call
rgrover1	716:11b41f651697	985	* to ble.updateCharacteristicValue() should be replaced with
rgrover1	716:11b41f651697	986	* ble.gattServer().write().
rgrover1	716:11b41f651697	987	*/
rgrover1	716:11b41f651697	988	ble_error_t updateCharacteristicValue(GattAttribute::Handle_t attributeHandle,
rgrover1	716:11b41f651697	989	const uint8_t *value,
rgrover1	716:11b41f651697	990	uint16_t size,
rgrover1	716:11b41f651697	991	bool localOnly = false) {
rgrover1	716:11b41f651697	992	return gattServer().write(attributeHandle, value, size, localOnly);
rgrover1	716:11b41f651697	993	}
rgrover1	716:11b41f651697	994
rgrover1	716:11b41f651697	995	/**
rgrover1	716:11b41f651697	996	* Update the value of a characteristic on the local GattServer. A version
rgrover1	716:11b41f651697	997	* of the same as above with connection handle parameter to allow updates
rgrover1	733:718a3566b4ce	998	* for connection-specific multivalued attributes (such as the CCCDs).
rgrover1	716:11b41f651697	999	*
rgrover1	716:11b41f651697	1000	* @param[in] connectionHandle
rgrover1	716:11b41f651697	1001	* Connection Handle.
rgrover1	716:11b41f651697	1002	* @param[in] attributeHandle
rgrover1	716:11b41f651697	1003	* Handle for the value attribute of the Characteristic.
rgrover1	716:11b41f651697	1004	* @param[in] value
rgrover1	716:11b41f651697	1005	* A pointer to a buffer holding the new value
rgrover1	716:11b41f651697	1006	* @param[in] size
rgrover1	716:11b41f651697	1007	* Size of the new value (in bytes).
rgrover1	716:11b41f651697	1008	* @param[in] localOnly
rgrover1	716:11b41f651697	1009	* Should this update be kept on the local
rgrover1	716:11b41f651697	1010	* GattServer regardless of the state of the
rgrover1	716:11b41f651697	1011	* notify/indicate flag in the CCCD for this
rgrover1	716:11b41f651697	1012	* Characteristic? If set to true, no notification
rgrover1	716:11b41f651697	1013	* or indication is generated.
rgrover1	716:11b41f651697	1014	*
rgrover1	716:11b41f651697	1015	* @return BLE_ERROR_NONE if we have successfully set the value of the attribute.
rgrover1	716:11b41f651697	1016	*
rgrover1	716:11b41f651697	1017	* @note: This API is now deprecated and will be dropped in the future.
rgrover1	716:11b41f651697	1018	* You should use the parallel API from GattServer directly. A former call
rgrover1	716:11b41f651697	1019	* to ble.updateCharacteristicValue() should be replaced with
rgrover1	716:11b41f651697	1020	* ble.gattServer().write().
rgrover1	716:11b41f651697	1021	*/
rgrover1	716:11b41f651697	1022	ble_error_t updateCharacteristicValue(Gap::Handle_t connectionHandle,
rgrover1	716:11b41f651697	1023	GattAttribute::Handle_t attributeHandle,
rgrover1	716:11b41f651697	1024	const uint8_t *value,
rgrover1	716:11b41f651697	1025	uint16_t size,
rgrover1	716:11b41f651697	1026	bool localOnly = false) {
rgrover1	716:11b41f651697	1027	return gattServer().write(connectionHandle, attributeHandle, value, size, localOnly);
rgrover1	716:11b41f651697	1028	}
rgrover1	716:11b41f651697	1029
rgrover1	716:11b41f651697	1030	/**
rgrover1	716:11b41f651697	1031	* Enable the BLE stack's Security Manager. The Security Manager implements
rgrover1	716:11b41f651697	1032	* the actual cryptographic algorithms and protocol exchanges that allow two
rgrover1	716:11b41f651697	1033	* devices to securely exchange data and privately detect each other.
rgrover1	716:11b41f651697	1034	* Calling this API is a prerequisite for encryption and pairing (bonding).
rgrover1	716:11b41f651697	1035	*
rgrover1	716:11b41f651697	1036	* @param[in] enableBonding Allow for bonding.
rgrover1	716:11b41f651697	1037	* @param[in] requireMITM Require protection for man-in-the-middle attacks.
rgrover1	716:11b41f651697	1038	* @param[in] iocaps To specify IO capabilities of this peripheral,
rgrover1	716:11b41f651697	1039	* such as availability of a display or keyboard to
rgrover1	716:11b41f651697	1040	* support out-of-band exchanges of security data.
rgrover1	716:11b41f651697	1041	* @param[in] passkey To specify a static passkey.
rgrover1	716:11b41f651697	1042	*
rgrover1	716:11b41f651697	1043	* @return BLE_ERROR_NONE on success.
rgrover1	716:11b41f651697	1044	*
rgrover1	716:11b41f651697	1045	* @note: This API is now deprecated and will be dropped in the future.
rgrover1	716:11b41f651697	1046	* You should use the parallel API from SecurityManager directly. A former
rgrover1	716:11b41f651697	1047	* call to ble.initializeSecurity(...) should be replaced with
rgrover1	716:11b41f651697	1048	* ble.securityManager().init(...).
rgrover1	716:11b41f651697	1049	*/
rgrover1	716:11b41f651697	1050	ble_error_t initializeSecurity(bool enableBonding = true,
rgrover1	716:11b41f651697	1051	bool requireMITM = true,
rgrover1	716:11b41f651697	1052	SecurityManager::SecurityIOCapabilities_t iocaps = SecurityManager::IO_CAPS_NONE,
rgrover1	716:11b41f651697	1053	const SecurityManager::Passkey_t passkey = NULL) {
rgrover1	716:11b41f651697	1054	return securityManager().init(enableBonding, requireMITM, iocaps, passkey);
rgrover1	716:11b41f651697	1055	}
rgrover1	716:11b41f651697	1056
rgrover1	716:11b41f651697	1057	/**
rgrover1	716:11b41f651697	1058	* Get the security status of a connection.
rgrover1	716:11b41f651697	1059	*
rgrover1	716:11b41f651697	1060	* @param[in] connectionHandle Handle to identify the connection.
rgrover1	716:11b41f651697	1061	* @param[out] securityStatusP security status.
rgrover1	716:11b41f651697	1062	*
rgrover1	716:11b41f651697	1063	* @return BLE_SUCCESS Or appropriate error code indicating reason for failure.
rgrover1	716:11b41f651697	1064	*
rgrover1	716:11b41f651697	1065	* @note: This API is now deprecated and will be dropped in the future.
rgrover1	716:11b41f651697	1066	* You should use the parallel API from SecurityManager directly. A former
rgrover1	716:11b41f651697	1067	* call to ble.getLinkSecurity(...) should be replaced with
rgrover1	716:11b41f651697	1068	* ble.securityManager().getLinkSecurity(...).
rgrover1	716:11b41f651697	1069	*/
rgrover1	716:11b41f651697	1070	ble_error_t getLinkSecurity(Gap::Handle_t connectionHandle, SecurityManager::LinkSecurityStatus_t *securityStatusP) {
rgrover1	716:11b41f651697	1071	return securityManager().getLinkSecurity(connectionHandle, securityStatusP);
rgrover1	716:11b41f651697	1072	}
rgrover1	716:11b41f651697	1073
rgrover1	716:11b41f651697	1074	/**
rgrover1	716:11b41f651697	1075	* Delete all peer device context and all related bonding information from
rgrover1	716:11b41f651697	1076	* the database within the security manager.
rgrover1	716:11b41f651697	1077	*
rgrover1	716:11b41f651697	1078	* @retval BLE_ERROR_NONE On success, else an error code indicating reason for failure.
rgrover1	716:11b41f651697	1079	* @retval BLE_ERROR_INVALID_STATE If the API is called without module initialization and/or
rgrover1	716:11b41f651697	1080	* application registration.
rgrover1	716:11b41f651697	1081	*
rgrover1	716:11b41f651697	1082	* @note: This API is now deprecated and will be dropped in the future.
rgrover1	716:11b41f651697	1083	* You should use the parallel API from SecurityManager directly. A former
rgrover1	716:11b41f651697	1084	* call to ble.purgeAllBondingState() should be replaced with
rgrover1	716:11b41f651697	1085	* ble.securityManager().purgeAllBondingState().
rgrover1	716:11b41f651697	1086	*/
rgrover1	716:11b41f651697	1087	ble_error_t purgeAllBondingState(void) {
rgrover1	716:11b41f651697	1088	return securityManager().purgeAllBondingState();
rgrover1	716:11b41f651697	1089	}
rgrover1	716:11b41f651697	1090
rgrover1	716:11b41f651697	1091	/**
rgrover1	716:11b41f651697	1092	* Setup a callback for timeout events. Refer to Gap::TimeoutSource_t for
rgrover1	716:11b41f651697	1093	* possible event types.
rgrover1	716:11b41f651697	1094	*
rgrover1	716:11b41f651697	1095	* @note: This API is now deprecated and will be dropped in the future.
rgrover1	751:868b6dd7a6bf	1096	* You should use the parallel API from Gap directly. A former call
rgrover1	716:11b41f651697	1097	* to ble.onTimeout(callback) should be replaced with
rgrover1	716:11b41f651697	1098	* ble.gap().onTimeout(callback).
rgrover1	716:11b41f651697	1099	*/
rgrover1	716:11b41f651697	1100	void onTimeout(Gap::TimeoutEventCallback_t timeoutCallback) {
rgrover1	716:11b41f651697	1101	gap().onTimeout(timeoutCallback);
rgrover1	716:11b41f651697	1102	}
rgrover1	716:11b41f651697	1103
rgrover1	716:11b41f651697	1104	/**
rgrover1	716:11b41f651697	1105	* Setup a callback for connection events. Refer to Gap::ConnectionEventCallback_t.
rgrover1	716:11b41f651697	1106	*
rgrover1	716:11b41f651697	1107	* @note: This API is now deprecated and will be dropped in the future.
rgrover1	751:868b6dd7a6bf	1108	* You should use the parallel API from Gap directly. A former call
rgrover1	716:11b41f651697	1109	* to ble.onConnection(callback) should be replaced with
rgrover1	716:11b41f651697	1110	* ble.gap().onConnection(callback).
rgrover1	716:11b41f651697	1111	*/
rgrover1	716:11b41f651697	1112	void onConnection(Gap::ConnectionEventCallback_t connectionCallback) {
rgrover1	716:11b41f651697	1113	gap().onConnection(connectionCallback);
rgrover1	716:11b41f651697	1114	}
rgrover1	716:11b41f651697	1115
rgrover1	716:11b41f651697	1116	/**
rgrover1	716:11b41f651697	1117	* Used to setup a callback for GAP disconnection.
rgrover1	716:11b41f651697	1118	*
rgrover1	716:11b41f651697	1119	* @note: This API is now deprecated and will be dropped in the future.
rgrover1	751:868b6dd7a6bf	1120	* You should use the parallel API from Gap directly. A former call
rgrover1	716:11b41f651697	1121	* to ble.onDisconnection(callback) should be replaced with
rgrover1	716:11b41f651697	1122	* ble.gap().onDisconnection(callback).
rgrover1	716:11b41f651697	1123	*/
rgrover1	716:11b41f651697	1124	void onDisconnection(Gap::DisconnectionEventCallback_t disconnectionCallback) {
rgrover1	716:11b41f651697	1125	gap().onDisconnection(disconnectionCallback);
rgrover1	716:11b41f651697	1126	}
rgrover1	716:11b41f651697	1127
rgrover1	716:11b41f651697	1128	/**
rgrover1	716:11b41f651697	1129	* Append to a chain of callbacks to be invoked upon disconnection; these
rgrover1	716:11b41f651697	1130	* callbacks receive no context and are therefore different from the
rgrover1	716:11b41f651697	1131	* onDisconnection callback.
rgrover1	716:11b41f651697	1132	*
rgrover1	716:11b41f651697	1133	* @note: This API is now deprecated and will be dropped in the future.
rgrover1	751:868b6dd7a6bf	1134	* You should use the parallel API from Gap directly. A former call
rgrover1	716:11b41f651697	1135	* to ble.addToDisconnectionCallchain(...) should be replaced with
rgrover1	716:11b41f651697	1136	* ble.gap().addToDisconnectionCallchain(...).
rgrover1	716:11b41f651697	1137	*/
rgrover1	716:11b41f651697	1138	template<typename T>
rgrover1	716:11b41f651697	1139	void addToDisconnectionCallChain(T tptr, void (T::mptr)(void)) {
rgrover1	716:11b41f651697	1140	gap().addToDisconnectionCallChain(tptr, mptr);
rgrover1	716:11b41f651697	1141	}
rgrover1	716:11b41f651697	1142
rgrover1	716:11b41f651697	1143	/**
rgrover1	716:11b41f651697	1144	* Radio Notification is a feature that enables ACTIVE and INACTIVE
rgrover1	716:11b41f651697	1145	* (nACTIVE) signals from the stack that notify the application when the
rgrover1	716:11b41f651697	1146	* radio is in use. The signal is sent using software interrupt.
rgrover1	716:11b41f651697	1147	*
rgrover1	716:11b41f651697	1148	* The ACTIVE signal is sent before the Radio Event starts. The nACTIVE
rgrover1	716:11b41f651697	1149	* signal is sent at the end of the Radio Event. These signals can be used
rgrover1	716:11b41f651697	1150	* by the application programmer to synchronize application logic with radio
rgrover1	716:11b41f651697	1151	* activity. For example, the ACTIVE signal can be used to shut off external
rgrover1	716:11b41f651697	1152	* devices to manage peak current drawn during periods when the radio is on,
rgrover1	716:11b41f651697	1153	* or to trigger sensor data collection for transmission in the Radio Event.
rgrover1	716:11b41f651697	1154	*
rgrover1	716:11b41f651697	1155	* @param callback
rgrover1	716:11b41f651697	1156	* The application handler to be invoked in response to a radio
rgrover1	716:11b41f651697	1157	* ACTIVE/INACTIVE event.
rgrover1	716:11b41f651697	1158	*
rgrover1	716:11b41f651697	1159	* @note: This API is now deprecated and will be dropped in the future.
rgrover1	751:868b6dd7a6bf	1160	* You should use the parallel API from Gap directly. A former call
rgrover1	716:11b41f651697	1161	* to ble.onRadioNotification(...) should be replaced with
rgrover1	716:11b41f651697	1162	* ble.gap().onRadioNotification(...).
rgrover1	716:11b41f651697	1163	*/
rgrover1	752:424c2ae44553	1164	void onRadioNotification(void (*callback)(bool)) {
rgrover1	716:11b41f651697	1165	gap().onRadioNotification(callback);
rgrover1	716:11b41f651697	1166	}
rgrover1	716:11b41f651697	1167
rgrover1	716:11b41f651697	1168	/**
rgrover1	716:11b41f651697	1169	* Add a callback for the GATT event DATA_SENT (which is triggered when
rgrover1	716:11b41f651697	1170	* updates are sent out by GATT in the form of notifications).
rgrover1	716:11b41f651697	1171	*
rgrover1	716:11b41f651697	1172	* @Note: it is possible to chain together multiple onDataSent callbacks
rgrover1	716:11b41f651697	1173	* (potentially from different modules of an application) to receive updates
rgrover1	716:11b41f651697	1174	* to characteristics.
rgrover1	716:11b41f651697	1175	*
rgrover1	716:11b41f651697	1176	* @Note: it is also possible to setup a callback into a member function of
rgrover1	716:11b41f651697	1177	* some object.
rgrover1	716:11b41f651697	1178	*
rgrover1	716:11b41f651697	1179	* @note: This API is now deprecated and will be dropped in the future.
rgrover1	716:11b41f651697	1180	* You should use the parallel API from GattServer directly. A former call
rgrover1	716:11b41f651697	1181	* to ble.onDataSent(...) should be replaced with
rgrover1	716:11b41f651697	1182	* ble.gattServer().onDataSent(...).
rgrover1	716:11b41f651697	1183	*/
rgrover1	716:11b41f651697	1184	void onDataSent(void (*callback)(unsigned count)) {
rgrover1	716:11b41f651697	1185	gattServer().onDataSent(callback);
rgrover1	716:11b41f651697	1186	}
rgrover1	716:11b41f651697	1187	template <typename T> void onDataSent(T * objPtr, void (T::*memberPtr)(unsigned count)) {
rgrover1	716:11b41f651697	1188	gattServer().onDataSent(objPtr, memberPtr);
rgrover1	716:11b41f651697	1189	}
rgrover1	716:11b41f651697	1190
rgrover1	716:11b41f651697	1191	/**
rgrover1	716:11b41f651697	1192	* Setup a callback for when an attribute has its value updated by or at the
rgrover1	716:11b41f651697	1193	* connected peer. For a peripheral, this callback triggered when the local
rgrover1	716:11b41f651697	1194	* GATT server has an attribute updated by a write command from the peer.
rgrover1	716:11b41f651697	1195	* For a Central, this callback is triggered when a response is received for
rgrover1	716:11b41f651697	1196	* a write request.
rgrover1	716:11b41f651697	1197	*
rgrover1	716:11b41f651697	1198	* @Note: it is possible to chain together multiple onDataWritten callbacks
rgrover1	716:11b41f651697	1199	* (potentially from different modules of an application) to receive updates
rgrover1	716:11b41f651697	1200	* to characteristics. Many services, such as DFU and UART add their own
rgrover1	716:11b41f651697	1201	* onDataWritten callbacks behind the scenes to trap interesting events.
rgrover1	716:11b41f651697	1202	*
rgrover1	716:11b41f651697	1203	* @Note: it is also possible to setup a callback into a member function of
rgrover1	716:11b41f651697	1204	* some object.
rgrover1	716:11b41f651697	1205	*
rgrover1	716:11b41f651697	1206	* @note: This API is now deprecated and will be dropped in the future.
rgrover1	716:11b41f651697	1207	* You should use the parallel API from GattServer directly. A former call
rgrover1	716:11b41f651697	1208	* to ble.onDataWritten(...) should be replaced with
rgrover1	716:11b41f651697	1209	* ble.gattServer().onDataWritten(...).
rgrover1	716:11b41f651697	1210	*/
rgrover1	716:11b41f651697	1211	void onDataWritten(void (callback)(const GattWriteCallbackParams eventDataP)) {
rgrover1	716:11b41f651697	1212	gattServer().onDataWritten(callback);
rgrover1	716:11b41f651697	1213	}
rgrover1	716:11b41f651697	1214	template <typename T> void onDataWritten(T * objPtr, void (T::memberPtr)(const GattWriteCallbackParams context)) {
rgrover1	716:11b41f651697	1215	gattServer().onDataWritten(objPtr, memberPtr);
rgrover1	716:11b41f651697	1216	}
rgrover1	716:11b41f651697	1217
rgrover1	716:11b41f651697	1218	/**
rgrover1	716:11b41f651697	1219	* Setup a callback to be invoked on the peripheral when an attribute is
rgrover1	716:11b41f651697	1220	* being read by a remote client.
rgrover1	716:11b41f651697	1221	*
rgrover1	716:11b41f651697	1222	* @Note: this functionality may not be available on all underlying stacks.
rgrover1	716:11b41f651697	1223	* You could use GattCharacteristic::setReadAuthorizationCallback() as an
rgrover1	716:11b41f651697	1224	* alternative.
rgrover1	716:11b41f651697	1225	*
rgrover1	716:11b41f651697	1226	* @Note: it is possible to chain together multiple onDataRead callbacks
rgrover1	716:11b41f651697	1227	* (potentially from different modules of an application) to receive updates
rgrover1	716:11b41f651697	1228	* to characteristics. Services may add their own onDataRead callbacks
rgrover1	716:11b41f651697	1229	* behind the scenes to trap interesting events.
rgrover1	716:11b41f651697	1230	*
rgrover1	716:11b41f651697	1231	* @Note: it is also possible to setup a callback into a member function of
rgrover1	716:11b41f651697	1232	* some object.
rgrover1	716:11b41f651697	1233	*
rgrover1	716:11b41f651697	1234	* @return BLE_ERROR_NOT_IMPLEMENTED if this functionality isn't available;
rgrover1	716:11b41f651697	1235	* else BLE_ERROR_NONE.
rgrover1	716:11b41f651697	1236	*
rgrover1	716:11b41f651697	1237	* @note: This API is now deprecated and will be dropped in the future.
rgrover1	716:11b41f651697	1238	* You should use the parallel API from GattServer directly. A former call
rgrover1	716:11b41f651697	1239	* to ble.onDataRead(...) should be replaced with
rgrover1	716:11b41f651697	1240	* ble.gattServer().onDataRead(...).
rgrover1	716:11b41f651697	1241	*/
rgrover1	716:11b41f651697	1242	ble_error_t onDataRead(void (callback)(const GattReadCallbackParams eventDataP)) {
rgrover1	716:11b41f651697	1243	return gattServer().onDataRead(callback);
rgrover1	716:11b41f651697	1244	}
rgrover1	716:11b41f651697	1245	template <typename T> ble_error_t onDataRead(T * objPtr, void (T::memberPtr)(const GattReadCallbackParams context)) {
rgrover1	716:11b41f651697	1246	return gattServer().onDataRead(objPtr, memberPtr);
rgrover1	716:11b41f651697	1247	}
rgrover1	716:11b41f651697	1248
rgrover1	716:11b41f651697	1249	/**
rgrover1	716:11b41f651697	1250	* Setup a callback for when notifications/indications are enabled for a
rgrover1	716:11b41f651697	1251	* characteristic on the local GattServer.
rgrover1	716:11b41f651697	1252	*
rgrover1	716:11b41f651697	1253	* @note: This API is now deprecated and will be dropped in the future.
rgrover1	716:11b41f651697	1254	* You should use the parallel API from GattServer directly. A former call
rgrover1	716:11b41f651697	1255	* to ble.onUpdatesEnabled(callback) should be replaced with
rgrover1	716:11b41f651697	1256	* ble.gattServer().onUpdatesEnabled(callback).
rgrover1	716:11b41f651697	1257	*/
rgrover1	716:11b41f651697	1258	void onUpdatesEnabled(GattServer::EventCallback_t callback) {
rgrover1	716:11b41f651697	1259	gattServer().onUpdatesEnabled(callback);
rgrover1	716:11b41f651697	1260	}
rgrover1	716:11b41f651697	1261
rgrover1	716:11b41f651697	1262	/**
rgrover1	716:11b41f651697	1263	* Setup a callback for when notifications/indications are disabled for a
rgrover1	716:11b41f651697	1264	* characteristic on the local GattServer.
rgrover1	716:11b41f651697	1265	*
rgrover1	716:11b41f651697	1266	* @note: This API is now deprecated and will be dropped in the future.
rgrover1	716:11b41f651697	1267	* You should use the parallel API from GattServer directly. A former call
rgrover1	716:11b41f651697	1268	* to ble.onUpdatesEnabled(callback) should be replaced with
rgrover1	716:11b41f651697	1269	* ble.gattServer().onUpdatesEnabled(callback).
rgrover1	716:11b41f651697	1270	*/
rgrover1	716:11b41f651697	1271	void onUpdatesDisabled(GattServer::EventCallback_t callback) {
rgrover1	716:11b41f651697	1272	gattServer().onUpdatesDisabled(callback);
rgrover1	716:11b41f651697	1273	}
rgrover1	716:11b41f651697	1274
rgrover1	716:11b41f651697	1275	/**
rgrover1	716:11b41f651697	1276	* Setup a callback for when the GATT server receives a response for an
rgrover1	716:11b41f651697	1277	* indication event sent previously.
rgrover1	716:11b41f651697	1278	*
rgrover1	716:11b41f651697	1279	* @note: This API is now deprecated and will be dropped in the future.
rgrover1	716:11b41f651697	1280	* You should use the parallel API from GattServer directly. A former call
rgrover1	716:11b41f651697	1281	* to ble.onConfirmationReceived(callback) should be replaced with
rgrover1	716:11b41f651697	1282	* ble.gattServer().onConfirmationReceived(callback).
rgrover1	716:11b41f651697	1283	*/
rgrover1	716:11b41f651697	1284	void onConfirmationReceived(GattServer::EventCallback_t callback) {
rgrover1	716:11b41f651697	1285	gattServer().onConfirmationReceived(callback);
rgrover1	716:11b41f651697	1286	}
rgrover1	716:11b41f651697	1287
rgrover1	716:11b41f651697	1288	/**
rgrover1	716:11b41f651697	1289	* Setup a callback for when the security setup procedure (key generation
rgrover1	716:11b41f651697	1290	* and exchange) for a link has started. This will be skipped for bonded
rgrover1	716:11b41f651697	1291	* devices. The callback is passed in parameters received from the peer's
rgrover1	716:11b41f651697	1292	* security request: bool allowBonding, bool requireMITM, and
rgrover1	716:11b41f651697	1293	* SecurityIOCapabilities_t.
rgrover1	716:11b41f651697	1294	*
rgrover1	716:11b41f651697	1295	* @note: This API is now deprecated and will be dropped in the future.
rgrover1	716:11b41f651697	1296	* You should use the parallel API from SecurityManager directly. A former
rgrover1	716:11b41f651697	1297	* call to ble.onSecuritySetupInitiated(callback) should be replaced with
rgrover1	716:11b41f651697	1298	* ble.securityManager().onSecuritySetupInitiated(callback).
rgrover1	716:11b41f651697	1299	*/
rgrover1	716:11b41f651697	1300	void onSecuritySetupInitiated(SecurityManager::SecuritySetupInitiatedCallback_t callback) {
rgrover1	716:11b41f651697	1301	securityManager().onSecuritySetupInitiated(callback);
rgrover1	716:11b41f651697	1302	}
rgrover1	716:11b41f651697	1303
rgrover1	716:11b41f651697	1304	/**
rgrover1	716:11b41f651697	1305	* Setup a callback for when the security setup procedure (key generation
rgrover1	716:11b41f651697	1306	* and exchange) for a link has completed. This will be skipped for bonded
rgrover1	716:11b41f651697	1307	* devices. The callback is passed in the success/failure status of the
rgrover1	716:11b41f651697	1308	* security setup procedure.
rgrover1	716:11b41f651697	1309	*
rgrover1	716:11b41f651697	1310	* @note: This API is now deprecated and will be dropped in the future.
rgrover1	716:11b41f651697	1311	* You should use the parallel API from SecurityManager directly. A former
rgrover1	716:11b41f651697	1312	* call to ble.onSecuritySetupCompleted(callback) should be replaced with
rgrover1	716:11b41f651697	1313	* ble.securityManager().onSecuritySetupCompleted(callback).
rgrover1	716:11b41f651697	1314	*/
rgrover1	716:11b41f651697	1315	void onSecuritySetupCompleted(SecurityManager::SecuritySetupCompletedCallback_t callback) {
rgrover1	716:11b41f651697	1316	securityManager().onSecuritySetupCompleted(callback);
rgrover1	716:11b41f651697	1317	}
rgrover1	716:11b41f651697	1318
rgrover1	716:11b41f651697	1319	/**
rgrover1	716:11b41f651697	1320	* Setup a callback for when a link with the peer is secured. For bonded
rgrover1	716:11b41f651697	1321	* devices, subsequent reconnections with bonded peer will result only in
rgrover1	716:11b41f651697	1322	* this callback when the link is secured and setup procedures will not
rgrover1	716:11b41f651697	1323	* occur unless the bonding information is either lost or deleted on either
rgrover1	716:11b41f651697	1324	* or both sides. The callback is passed in a SecurityManager::SecurityMode_t according
rgrover1	716:11b41f651697	1325	* to the level of security in effect for the secured link.
rgrover1	716:11b41f651697	1326	*
rgrover1	716:11b41f651697	1327	* @note: This API is now deprecated and will be dropped in the future.
rgrover1	716:11b41f651697	1328	* You should use the parallel API from SecurityManager directly. A former
rgrover1	716:11b41f651697	1329	* call to ble.onLinkSecured(callback) should be replaced with
rgrover1	716:11b41f651697	1330	* ble.securityManager().onLinkSecured(callback).
rgrover1	716:11b41f651697	1331	*/
rgrover1	716:11b41f651697	1332	void onLinkSecured(SecurityManager::LinkSecuredCallback_t callback) {
rgrover1	716:11b41f651697	1333	securityManager().onLinkSecured(callback);
rgrover1	716:11b41f651697	1334	}
rgrover1	716:11b41f651697	1335
rgrover1	716:11b41f651697	1336	/**
rgrover1	716:11b41f651697	1337	* Setup a callback for successful bonding; i.e. that link-specific security
rgrover1	716:11b41f651697	1338	* context is stored persistently for a peer device.
rgrover1	716:11b41f651697	1339	*
rgrover1	716:11b41f651697	1340	* @note: This API is now deprecated and will be dropped in the future.
rgrover1	716:11b41f651697	1341	* You should use the parallel API from SecurityManager directly. A former
rgrover1	716:11b41f651697	1342	* call to ble.onSecurityContextStored(callback) should be replaced with
rgrover1	716:11b41f651697	1343	* ble.securityManager().onSecurityContextStored(callback).
rgrover1	716:11b41f651697	1344	*/
rgrover1	716:11b41f651697	1345	void onSecurityContextStored(SecurityManager::HandleSpecificEvent_t callback) {
rgrover1	716:11b41f651697	1346	securityManager().onSecurityContextStored(callback);
rgrover1	716:11b41f651697	1347	}
rgrover1	716:11b41f651697	1348
rgrover1	716:11b41f651697	1349	/**
rgrover1	716:11b41f651697	1350	* Setup a callback for when the passkey needs to be displayed on a
rgrover1	716:11b41f651697	1351	* peripheral with DISPLAY capability. This happens when security is
rgrover1	716:11b41f651697	1352	* configured to prevent Man-In-The-Middle attacks, and a PIN (or passkey)
rgrover1	716:11b41f651697	1353	* needs to be exchanged between the peers to authenticate the connection
rgrover1	716:11b41f651697	1354	* attempt.
rgrover1	716:11b41f651697	1355	*
rgrover1	716:11b41f651697	1356	* @note: This API is now deprecated and will be dropped in the future.
rgrover1	716:11b41f651697	1357	* You should use the parallel API from SecurityManager directly. A former
rgrover1	716:11b41f651697	1358	* call to ble.onPasskeyDisplay(callback) should be replaced with
rgrover1	716:11b41f651697	1359	* ble.securityManager().onPasskeyDisplay(callback).
rgrover1	716:11b41f651697	1360	*/
rgrover1	716:11b41f651697	1361	void onPasskeyDisplay(SecurityManager::PasskeyDisplayCallback_t callback) {
rgrover1	716:11b41f651697	1362	return securityManager().onPasskeyDisplay(callback);
rgrover1	716:11b41f651697	1363	}
rgrover1	716:11b41f651697	1364
rgrover1	821:86038b69609c	1365	public:
rgrover1	821:86038b69609c	1366	BLE() : transport(createBLEInstance()) {
rgrover1	821:86038b69609c	1367	/* empty */
rgrover1	821:86038b69609c	1368	}
rgrover1	821:86038b69609c	1369
rgrover1	716:11b41f651697	1370	private:
rgrover1	806:50c121156a71	1371	BLE(const BLE&);
rgrover1	806:50c121156a71	1372	BLE &operator=(const BLE &);
rgrover1	806:50c121156a71	1373
rgrover1	806:50c121156a71	1374	private:
rgrover1	821:86038b69609c	1375	BLEInstanceBase const transport; / the device specific backend */
rgrover1	716:11b41f651697	1376	};
rgrover1	716:11b41f651697	1377
rgrover1	716:11b41f651697	1378	typedef BLE BLEDevice; /* DEPRECATED. This type alias is retained for the sake of compatibility with older
rgrover1	716:11b41f651697	1379	* code. Will be dropped at some point soon.*/
rgrover1	716:11b41f651697	1380
rgrover1	716:11b41f651697	1381	#endif // ifndef __BLE_H__

Repository toolbox

Export to desktop IDE

Repository details

Type:	Library
Created:	08 Jul 2016
Imports:	0
Forks:	0
Commits:	1202
Dependents:	0
Dependencies:	0
Followers:	1

ble/BLE.h@821:86038b69609c, 2015-09-29 (annotated)

Who changed what in which revision?

Repository toolbox

Repository details

Important Information for this Arm website

Access Warning