Marco Ferreira / BLE_API

just a fork

Fork of BLE_API by Bluetooth Low Energy

ble/Gap.h@727:1a1f5c5aedfe, 2015-07-06 (annotated)

Committer:
rgrover1
Date:
Mon Jul 06 10:10:34 2015 +0100
Revision:
727:1a1f5c5aedfe
Parent:
725:f4a355b35cf8
Child:
728:997ba5e7b3b6
Synchronized with git rev 854fd111

Author: James Crosby

use mbed-classic to build (this will probably be a target-dependendency in the future)

Who changed what in which revision?

UserRevisionLine numberNew contents of line
rgrover1 710:b2e1a2660ec2 1 /* mbed Microcontroller Library
rgrover1 710:b2e1a2660ec2 2 * Copyright (c) 2006-2013 ARM Limited
rgrover1 710:b2e1a2660ec2 3 *
rgrover1 710:b2e1a2660ec2 4 * Licensed under the Apache License, Version 2.0 (the "License");
rgrover1 710:b2e1a2660ec2 5 * you may not use this file except in compliance with the License.
rgrover1 710:b2e1a2660ec2 6 * You may obtain a copy of the License at
rgrover1 710:b2e1a2660ec2 7 *
rgrover1 710:b2e1a2660ec2 8 * http://www.apache.org/licenses/LICENSE-2.0
rgrover1 710:b2e1a2660ec2 9 *
rgrover1 710:b2e1a2660ec2 10 * Unless required by applicable law or agreed to in writing, software
rgrover1 710:b2e1a2660ec2 11 * distributed under the License is distributed on an "AS IS" BASIS,
rgrover1 710:b2e1a2660ec2 12 * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
rgrover1 710:b2e1a2660ec2 13 * See the License for the specific language governing permissions and
rgrover1 710:b2e1a2660ec2 14 * limitations under the License.
rgrover1 710:b2e1a2660ec2 15 */
rgrover1 710:b2e1a2660ec2 16
rgrover1 710:b2e1a2660ec2 17 #ifndef __GAP_H__
rgrover1 710:b2e1a2660ec2 18 #define __GAP_H__
rgrover1 710:b2e1a2660ec2 19
rgrover1 710:b2e1a2660ec2 20 #include "GapAdvertisingData.h"
rgrover1 710:b2e1a2660ec2 21 #include "GapAdvertisingParams.h"
rgrover1 710:b2e1a2660ec2 22 #include "GapScanningParams.h"
rgrover1 710:b2e1a2660ec2 23 #include "GapEvents.h"
rgrover1 710:b2e1a2660ec2 24 #include "CallChain.h"
rgrover1 710:b2e1a2660ec2 25 #include "FunctionPointerWithContext.h"
rgrover1 710:b2e1a2660ec2 26
rgrover1 710:b2e1a2660ec2 27 using namespace mbed;
rgrover1 710:b2e1a2660ec2 28
rgrover1 710:b2e1a2660ec2 29 /* Forward declarations for classes which will only be used for pointers or references in the following. */
rgrover1 710:b2e1a2660ec2 30 class GapAdvertisingParams;
rgrover1 710:b2e1a2660ec2 31 class GapScanningParams;
rgrover1 710:b2e1a2660ec2 32 class GapAdvertisingData;
rgrover1 710:b2e1a2660ec2 33
rgrover1 710:b2e1a2660ec2 34 class Gap {
rgrover1 710:b2e1a2660ec2 35 public:
rgrover1 710:b2e1a2660ec2 36 enum AddressType_t {
rgrover1 710:b2e1a2660ec2 37 ADDR_TYPE_PUBLIC = 0,
rgrover1 710:b2e1a2660ec2 38 ADDR_TYPE_RANDOM_STATIC,
rgrover1 710:b2e1a2660ec2 39 ADDR_TYPE_RANDOM_PRIVATE_RESOLVABLE,
rgrover1 710:b2e1a2660ec2 40 ADDR_TYPE_RANDOM_PRIVATE_NON_RESOLVABLE
rgrover1 710:b2e1a2660ec2 41 };
rgrover1 710:b2e1a2660ec2 42 typedef enum AddressType_t addr_type_t; /* @Note: deprecated. Use AddressType_t instead. */
rgrover1 710:b2e1a2660ec2 43
rgrover1 710:b2e1a2660ec2 44 static const unsigned ADDR_LEN = 6;
rgrover1 710:b2e1a2660ec2 45 typedef uint8_t Address_t[ADDR_LEN]; /* 48-bit address, LSB format. */
rgrover1 710:b2e1a2660ec2 46 typedef Address_t address_t; /* @Note: deprecated. Use Address_t instead. */
rgrover1 710:b2e1a2660ec2 47
rgrover1 710:b2e1a2660ec2 48 enum TimeoutSource_t {
rgrover1 710:b2e1a2660ec2 49 TIMEOUT_SRC_ADVERTISING = 0x00, /**< Advertising timeout. */
rgrover1 710:b2e1a2660ec2 50 TIMEOUT_SRC_SECURITY_REQUEST = 0x01, /**< Security request timeout. */
rgrover1 710:b2e1a2660ec2 51 TIMEOUT_SRC_SCAN = 0x02, /**< Scanning timeout. */
rgrover1 710:b2e1a2660ec2 52 TIMEOUT_SRC_CONN = 0x03, /**< Connection timeout. */
rgrover1 710:b2e1a2660ec2 53 };
rgrover1 710:b2e1a2660ec2 54
rgrover1 710:b2e1a2660ec2 55 /**
rgrover1 710:b2e1a2660ec2 56 * Enumeration for disconnection reasons. The values for these reasons are
rgrover1 710:b2e1a2660ec2 57 * derived from Nordic's implementation; but the reasons are meant to be
rgrover1 710:b2e1a2660ec2 58 * independent of the transport. If you are returned a reason which is not
rgrover1 710:b2e1a2660ec2 59 * covered by this enumeration, then please refer to the underlying
rgrover1 710:b2e1a2660ec2 60 * transport library.
rgrover1 710:b2e1a2660ec2 61 */
rgrover1 710:b2e1a2660ec2 62 enum DisconnectionReason_t {
rgrover1 710:b2e1a2660ec2 63 CONNECTION_TIMEOUT = 0x08,
rgrover1 710:b2e1a2660ec2 64 REMOTE_USER_TERMINATED_CONNECTION = 0x13,
rgrover1 710:b2e1a2660ec2 65 REMOTE_DEV_TERMINATION_DUE_TO_LOW_RESOURCES = 0x14, /**< Remote Device Terminated Connection due to low resources.*/
rgrover1 710:b2e1a2660ec2 66 REMOTE_DEV_TERMINATION_DUE_TO_POWER_OFF = 0x15, /**< Remote Device Terminated Connection due to power off. */
rgrover1 710:b2e1a2660ec2 67 LOCAL_HOST_TERMINATED_CONNECTION = 0x16,
rgrover1 710:b2e1a2660ec2 68 CONN_INTERVAL_UNACCEPTABLE = 0x3B,
rgrover1 710:b2e1a2660ec2 69 };
rgrover1 710:b2e1a2660ec2 70
rgrover1 710:b2e1a2660ec2 71 /* Describes the current state of the device (more than one bit can be set) */
rgrover1 710:b2e1a2660ec2 72 struct GapState_t {
rgrover1 710:b2e1a2660ec2 73 unsigned advertising : 1; /**< peripheral is currently advertising */
rgrover1 710:b2e1a2660ec2 74 unsigned connected : 1; /**< peripheral is connected to a central */
rgrover1 710:b2e1a2660ec2 75 };
rgrover1 710:b2e1a2660ec2 76
rgrover1 710:b2e1a2660ec2 77 typedef uint16_t Handle_t; /* Type for connection handle. */
rgrover1 710:b2e1a2660ec2 78
rgrover1 710:b2e1a2660ec2 79 typedef struct {
rgrover1 710:b2e1a2660ec2 80 uint16_t minConnectionInterval; /**< Minimum Connection Interval in 1.25 ms units, see @ref BLE_GAP_CP_LIMITS.*/
rgrover1 710:b2e1a2660ec2 81 uint16_t maxConnectionInterval; /**< Maximum Connection Interval in 1.25 ms units, see @ref BLE_GAP_CP_LIMITS.*/
rgrover1 710:b2e1a2660ec2 82 uint16_t slaveLatency; /**< Slave Latency in number of connection events, see @ref BLE_GAP_CP_LIMITS.*/
rgrover1 710:b2e1a2660ec2 83 uint16_t connectionSupervisionTimeout; /**< Connection Supervision Timeout in 10 ms units, see @ref BLE_GAP_CP_LIMITS.*/
rgrover1 710:b2e1a2660ec2 84 } ConnectionParams_t;
rgrover1 710:b2e1a2660ec2 85
rgrover1 710:b2e1a2660ec2 86 enum Role_t {
rgrover1 710:b2e1a2660ec2 87 PERIPHERAL = 0x1, /**< Peripheral Role. */
rgrover1 710:b2e1a2660ec2 88 CENTRAL = 0x2, /**< Central Role. */
rgrover1 710:b2e1a2660ec2 89 };
rgrover1 710:b2e1a2660ec2 90
rgrover1 710:b2e1a2660ec2 91 struct AdvertisementCallbackParams_t {
rgrover1 710:b2e1a2660ec2 92 Address_t peerAddr;
rgrover1 710:b2e1a2660ec2 93 int8_t rssi;
rgrover1 710:b2e1a2660ec2 94 bool isScanResponse;
rgrover1 710:b2e1a2660ec2 95 GapAdvertisingParams::AdvertisingType_t type;
rgrover1 710:b2e1a2660ec2 96 uint8_t advertisingDataLen;
rgrover1 710:b2e1a2660ec2 97 const uint8_t *advertisingData;
rgrover1 710:b2e1a2660ec2 98 };
rgrover1 710:b2e1a2660ec2 99 typedef FunctionPointerWithContext<const AdvertisementCallbackParams_t *> AdvertisementReportCallback_t;
rgrover1 710:b2e1a2660ec2 100
rgrover1 710:b2e1a2660ec2 101 struct ConnectionCallbackParams_t {
rgrover1 710:b2e1a2660ec2 102 Handle_t handle;
rgrover1 710:b2e1a2660ec2 103 Role_t role;
rgrover1 710:b2e1a2660ec2 104 AddressType_t peerAddrType;
rgrover1 710:b2e1a2660ec2 105 Address_t peerAddr;
rgrover1 710:b2e1a2660ec2 106 AddressType_t ownAddrType;
rgrover1 710:b2e1a2660ec2 107 Address_t ownAddr;
rgrover1 710:b2e1a2660ec2 108 const ConnectionParams_t *connectionParams;
rgrover1 710:b2e1a2660ec2 109
rgrover1 710:b2e1a2660ec2 110 ConnectionCallbackParams_t(Handle_t handleIn,
rgrover1 710:b2e1a2660ec2 111 Role_t roleIn,
rgrover1 710:b2e1a2660ec2 112 AddressType_t peerAddrTypeIn,
rgrover1 710:b2e1a2660ec2 113 const uint8_t *peerAddrIn,
rgrover1 710:b2e1a2660ec2 114 AddressType_t ownAddrTypeIn,
rgrover1 710:b2e1a2660ec2 115 const uint8_t *ownAddrIn,
rgrover1 710:b2e1a2660ec2 116 const ConnectionParams_t *connectionParamsIn) :
rgrover1 710:b2e1a2660ec2 117 handle(handleIn),
rgrover1 710:b2e1a2660ec2 118 role(roleIn),
rgrover1 710:b2e1a2660ec2 119 peerAddrType(peerAddrTypeIn),
rgrover1 710:b2e1a2660ec2 120 peerAddr(),
rgrover1 710:b2e1a2660ec2 121 ownAddrType(ownAddrTypeIn),
rgrover1 710:b2e1a2660ec2 122 ownAddr(),
rgrover1 710:b2e1a2660ec2 123 connectionParams(connectionParamsIn) {
rgrover1 710:b2e1a2660ec2 124 memcpy(peerAddr, peerAddrIn, ADDR_LEN);
rgrover1 710:b2e1a2660ec2 125 memcpy(ownAddr, ownAddrIn, ADDR_LEN);
rgrover1 710:b2e1a2660ec2 126 }
rgrover1 710:b2e1a2660ec2 127 };
rgrover1 710:b2e1a2660ec2 128
rgrover1 710:b2e1a2660ec2 129 static const uint16_t UNIT_1_25_MS = 1250; /**< Number of microseconds in 1.25 milliseconds. */
rgrover1 710:b2e1a2660ec2 130 static const uint16_t UNIT_0_625_MS = 625; /**< Number of microseconds in 0.625 milliseconds. */
rgrover1 710:b2e1a2660ec2 131 static uint16_t MSEC_TO_GAP_DURATION_UNITS(uint32_t durationInMillis) {
rgrover1 710:b2e1a2660ec2 132 return (durationInMillis * 1000) / UNIT_1_25_MS;
rgrover1 710:b2e1a2660ec2 133 }
rgrover1 710:b2e1a2660ec2 134 static uint16_t MSEC_TO_ADVERTISEMENT_DURATION_UNITS(uint32_t durationInMillis) {
rgrover1 710:b2e1a2660ec2 135 return (durationInMillis * 1000) / UNIT_0_625_MS;
rgrover1 710:b2e1a2660ec2 136 }
rgrover1 710:b2e1a2660ec2 137 static uint16_t ADVERTISEMENT_DURATION_UNITS_TO_MS(uint16_t gapUnits) {
rgrover1 710:b2e1a2660ec2 138 return (gapUnits * UNIT_0_625_MS) / 1000;
rgrover1 710:b2e1a2660ec2 139 }
rgrover1 710:b2e1a2660ec2 140
rgrover1 710:b2e1a2660ec2 141 typedef void (*TimeoutEventCallback_t)(TimeoutSource_t source);
rgrover1 710:b2e1a2660ec2 142 typedef void (*ConnectionEventCallback_t)(const ConnectionCallbackParams_t *params);
rgrover1 710:b2e1a2660ec2 143 typedef void (*DisconnectionEventCallback_t)(Handle_t, DisconnectionReason_t);
rgrover1 710:b2e1a2660ec2 144 typedef void (*RadioNotificationEventCallback_t)(bool radio_active); /* gets passed true for ACTIVE; false for INACTIVE. */
rgrover1 710:b2e1a2660ec2 145
rgrover1 710:b2e1a2660ec2 146 /*
rgrover1 710:b2e1a2660ec2 147 * The following functions are meant to be overridden in the platform-specific sub-class.
rgrover1 710:b2e1a2660ec2 148 */
rgrover1 710:b2e1a2660ec2 149 public:
rgrover1 710:b2e1a2660ec2 150 /**
rgrover1 710:b2e1a2660ec2 151 * Set the BTLE MAC address and type. Please note that the address format is
rgrover1 710:b2e1a2660ec2 152 * LSB (least significant byte first). Please refer to Address_t.
rgrover1 710:b2e1a2660ec2 153 *
rgrover1 710:b2e1a2660ec2 154 * @return BLE_ERROR_NONE on success.
rgrover1 710:b2e1a2660ec2 155 */
rgrover1 710:b2e1a2660ec2 156 virtual ble_error_t setAddress(AddressType_t type, const Address_t address) {
rgrover1 727:1a1f5c5aedfe 157 return BLE_ERROR_NOT_IMPLEMENTED; /* default implementation; override this API if this capability is supported. */
rgrover1 710:b2e1a2660ec2 158 }
rgrover1 710:b2e1a2660ec2 159
rgrover1 710:b2e1a2660ec2 160 /**
rgrover1 710:b2e1a2660ec2 161 * Fetch the BTLE MAC address and type.
rgrover1 710:b2e1a2660ec2 162 *
rgrover1 710:b2e1a2660ec2 163 * @return BLE_ERROR_NONE on success.
rgrover1 710:b2e1a2660ec2 164 */
rgrover1 710:b2e1a2660ec2 165 virtual ble_error_t getAddress(AddressType_t *typeP, Address_t address) {
rgrover1 727:1a1f5c5aedfe 166 return BLE_ERROR_NOT_IMPLEMENTED; /* default implementation; override this API if this capability is supported. */
rgrover1 710:b2e1a2660ec2 167 }
rgrover1 710:b2e1a2660ec2 168
rgrover1 710:b2e1a2660ec2 169 /**
rgrover1 710:b2e1a2660ec2 170 * @return Minimum Advertising interval in milliseconds.
rgrover1 710:b2e1a2660ec2 171 */
rgrover1 710:b2e1a2660ec2 172 virtual uint16_t getMinAdvertisingInterval(void) const {
rgrover1 710:b2e1a2660ec2 173 return 0; /* default implementation; override this API if this capability is supported. */
rgrover1 710:b2e1a2660ec2 174 }
rgrover1 710:b2e1a2660ec2 175
rgrover1 710:b2e1a2660ec2 176 /**
rgrover1 710:b2e1a2660ec2 177 * @return Minimum Advertising interval in milliseconds for non-connectible mode.
rgrover1 710:b2e1a2660ec2 178 */
rgrover1 710:b2e1a2660ec2 179 virtual uint16_t getMinNonConnectableAdvertisingInterval(void) const {
rgrover1 710:b2e1a2660ec2 180 return 0; /* default implementation; override this API if this capability is supported. */
rgrover1 710:b2e1a2660ec2 181 }
rgrover1 710:b2e1a2660ec2 182
rgrover1 710:b2e1a2660ec2 183 /**
rgrover1 710:b2e1a2660ec2 184 * @return Maximum Advertising interval in milliseconds.
rgrover1 710:b2e1a2660ec2 185 */
rgrover1 710:b2e1a2660ec2 186 virtual uint16_t getMaxAdvertisingInterval(void) const {
rgrover1 710:b2e1a2660ec2 187 return 0xFFFF; /* default implementation; override this API if this capability is supported. */
rgrover1 710:b2e1a2660ec2 188 }
rgrover1 710:b2e1a2660ec2 189
rgrover1 710:b2e1a2660ec2 190 virtual ble_error_t stopAdvertising(void) {
rgrover1 727:1a1f5c5aedfe 191 return BLE_ERROR_NOT_IMPLEMENTED; /* default implementation; override this API if this capability is supported. */
rgrover1 710:b2e1a2660ec2 192 }
rgrover1 710:b2e1a2660ec2 193
rgrover1 710:b2e1a2660ec2 194 /**
rgrover1 710:b2e1a2660ec2 195 * Stop scanning. The current scanning parameters remain in effect.
rgrover1 710:b2e1a2660ec2 196 *
rgrover1 710:b2e1a2660ec2 197 * @retval BLE_ERROR_NONE if successfully stopped scanning procedure.
rgrover1 710:b2e1a2660ec2 198 */
rgrover1 710:b2e1a2660ec2 199 virtual ble_error_t stopScan() {
rgrover1 727:1a1f5c5aedfe 200 return BLE_ERROR_NOT_IMPLEMENTED; /* default implementation; override this API if this capability is supported. */
rgrover1 710:b2e1a2660ec2 201 }
rgrover1 710:b2e1a2660ec2 202
rgrover1 710:b2e1a2660ec2 203 /**
rgrover1 710:b2e1a2660ec2 204 * Create a connection (GAP Link Establishment).
rgrover1 710:b2e1a2660ec2 205 *
rgrover1 710:b2e1a2660ec2 206 * @param peerAddr
rgrover1 710:b2e1a2660ec2 207 * 48-bit address, LSB format.
rgrover1 710:b2e1a2660ec2 208 * @param peerAddrType
rgrover1 710:b2e1a2660ec2 209 * Address type of the peer.
rgrover1 710:b2e1a2660ec2 210 * @param connectionParams
rgrover1 710:b2e1a2660ec2 211 * Connection parameters.
rgrover1 710:b2e1a2660ec2 212 * @param scanParams
rgrover1 710:b2e1a2660ec2 213 * Paramters to be used while scanning for the peer.
rgrover1 710:b2e1a2660ec2 214 * @return BLE_ERROR_NONE if connection establishment procedure is started
rgrover1 710:b2e1a2660ec2 215 * successfully. The connectionCallback (if set) will be invoked upon
rgrover1 710:b2e1a2660ec2 216 * a connection event.
rgrover1 710:b2e1a2660ec2 217 */
rgrover1 710:b2e1a2660ec2 218 virtual ble_error_t connect(const Address_t peerAddr,
rgrover1 710:b2e1a2660ec2 219 Gap::AddressType_t peerAddrType,
rgrover1 710:b2e1a2660ec2 220 const ConnectionParams_t *connectionParams,
rgrover1 710:b2e1a2660ec2 221 const GapScanningParams *scanParams) {
rgrover1 727:1a1f5c5aedfe 222 return BLE_ERROR_NOT_IMPLEMENTED; /* default implementation; override this API if this capability is supported. */
rgrover1 710:b2e1a2660ec2 223 }
rgrover1 710:b2e1a2660ec2 224
rgrover1 710:b2e1a2660ec2 225 /**
rgrover1 710:b2e1a2660ec2 226 * This call initiates the disconnection procedure, and its completion will
rgrover1 710:b2e1a2660ec2 227 * be communicated to the application with an invocation of the
rgrover1 710:b2e1a2660ec2 228 * disconnectionCallback.
rgrover1 710:b2e1a2660ec2 229 *
rgrover1 710:b2e1a2660ec2 230 * @param reason
rgrover1 710:b2e1a2660ec2 231 * The reason for disconnection to be sent back to the peer.
rgrover1 710:b2e1a2660ec2 232 */
rgrover1 710:b2e1a2660ec2 233 virtual ble_error_t disconnect(Handle_t connectionHandle, DisconnectionReason_t reason) {
rgrover1 727:1a1f5c5aedfe 234 return BLE_ERROR_NOT_IMPLEMENTED; /* default implementation; override this API if this capability is supported. */
rgrover1 710:b2e1a2660ec2 235 }
rgrover1 710:b2e1a2660ec2 236
rgrover1 710:b2e1a2660ec2 237 /**
rgrover1 710:b2e1a2660ec2 238 * This call initiates the disconnection procedure, and its completion will
rgrover1 710:b2e1a2660ec2 239 * be communicated to the application with an invocation of the
rgrover1 710:b2e1a2660ec2 240 * disconnectionCallback.
rgrover1 710:b2e1a2660ec2 241 *
rgrover1 710:b2e1a2660ec2 242 * @param reason
rgrover1 710:b2e1a2660ec2 243 * The reason for disconnection to be sent back to the peer.
rgrover1 710:b2e1a2660ec2 244 *
rgrover1 710:b2e1a2660ec2 245 * @note: this version of disconnect() doesn't take a connection handle. It
rgrover1 710:b2e1a2660ec2 246 * will work reliably only for stacks which are limited to a single
rgrover1 710:b2e1a2660ec2 247 * connection. This API should be considered *deprecated* in favour of the
rgrover1 710:b2e1a2660ec2 248 * altertive which takes a connection handle. It will be dropped in the future.
rgrover1 710:b2e1a2660ec2 249 */
rgrover1 710:b2e1a2660ec2 250 virtual ble_error_t disconnect(DisconnectionReason_t reason) {
rgrover1 727:1a1f5c5aedfe 251 return BLE_ERROR_NOT_IMPLEMENTED; /* default implementation; override this API if this capability is supported. */
rgrover1 710:b2e1a2660ec2 252 }
rgrover1 710:b2e1a2660ec2 253
rgrover1 710:b2e1a2660ec2 254 /**
rgrover1 710:b2e1a2660ec2 255 * Get the GAP peripheral preferred connection parameters. These are the
rgrover1 710:b2e1a2660ec2 256 * defaults that the peripheral would like to have in a connection. The
rgrover1 710:b2e1a2660ec2 257 * choice of the connection parameters is eventually up to the central.
rgrover1 710:b2e1a2660ec2 258 *
rgrover1 710:b2e1a2660ec2 259 * @param[out] params
rgrover1 710:b2e1a2660ec2 260 * The structure where the parameters will be stored. Memory
rgrover1 710:b2e1a2660ec2 261 * for this is owned by the caller.
rgrover1 710:b2e1a2660ec2 262 *
rgrover1 710:b2e1a2660ec2 263 * @return BLE_ERROR_NONE if the parameters were successfully filled into
rgrover1 710:b2e1a2660ec2 264 * the given structure pointed to by params.
rgrover1 710:b2e1a2660ec2 265 */
rgrover1 710:b2e1a2660ec2 266 virtual ble_error_t getPreferredConnectionParams(ConnectionParams_t *params) {
rgrover1 727:1a1f5c5aedfe 267 return BLE_ERROR_NOT_IMPLEMENTED; /* default implementation; override this API if this capability is supported. */
rgrover1 710:b2e1a2660ec2 268 }
rgrover1 710:b2e1a2660ec2 269
rgrover1 710:b2e1a2660ec2 270 /**
rgrover1 710:b2e1a2660ec2 271 * Set the GAP peripheral preferred connection parameters. These are the
rgrover1 710:b2e1a2660ec2 272 * defaults that the peripheral would like to have in a connection. The
rgrover1 710:b2e1a2660ec2 273 * choice of the connection parameters is eventually up to the central.
rgrover1 710:b2e1a2660ec2 274 *
rgrover1 710:b2e1a2660ec2 275 * @param[in] params
rgrover1 710:b2e1a2660ec2 276 * The structure containing the desired parameters.
rgrover1 710:b2e1a2660ec2 277 */
rgrover1 710:b2e1a2660ec2 278 virtual ble_error_t setPreferredConnectionParams(const ConnectionParams_t *params) {
rgrover1 727:1a1f5c5aedfe 279 return BLE_ERROR_NOT_IMPLEMENTED; /* default implementation; override this API if this capability is supported. */
rgrover1 710:b2e1a2660ec2 280 }
rgrover1 710:b2e1a2660ec2 281
rgrover1 710:b2e1a2660ec2 282 /**
rgrover1 710:b2e1a2660ec2 283 * Update connection parameters while in the peripheral role.
rgrover1 710:b2e1a2660ec2 284 * @details In the peripheral role, this will send the corresponding L2CAP request to the connected peer and wait for
rgrover1 710:b2e1a2660ec2 285 * the central to perform the procedure.
rgrover1 710:b2e1a2660ec2 286 * @param[in] handle
rgrover1 710:b2e1a2660ec2 287 * Connection Handle
rgrover1 710:b2e1a2660ec2 288 * @param[in] params
rgrover1 710:b2e1a2660ec2 289 * Pointer to desired connection parameters. If NULL is provided on a peripheral role,
rgrover1 710:b2e1a2660ec2 290 * the parameters in the PPCP characteristic of the GAP service will be used instead.
rgrover1 710:b2e1a2660ec2 291 */
rgrover1 710:b2e1a2660ec2 292 virtual ble_error_t updateConnectionParams(Handle_t handle, const ConnectionParams_t *params) {
rgrover1 727:1a1f5c5aedfe 293 return BLE_ERROR_NOT_IMPLEMENTED; /* default implementation; override this API if this capability is supported. */
rgrover1 710:b2e1a2660ec2 294 }
rgrover1 710:b2e1a2660ec2 295
rgrover1 710:b2e1a2660ec2 296 /**
rgrover1 710:b2e1a2660ec2 297 * Set the device name characteristic in the GAP service.
rgrover1 710:b2e1a2660ec2 298 * @param[in] deviceName
rgrover1 710:b2e1a2660ec2 299 * The new value for the device-name. This is a UTF-8 encoded, <b>NULL-terminated</b> string.
rgrover1 710:b2e1a2660ec2 300 */
rgrover1 710:b2e1a2660ec2 301 virtual ble_error_t setDeviceName(const uint8_t *deviceName) {
rgrover1 727:1a1f5c5aedfe 302 return BLE_ERROR_NOT_IMPLEMENTED; /* default implementation; override this API if this capability is supported. */
rgrover1 710:b2e1a2660ec2 303 }
rgrover1 710:b2e1a2660ec2 304
rgrover1 710:b2e1a2660ec2 305 /**
rgrover1 710:b2e1a2660ec2 306 * Get the value of the device name characteristic in the GAP service.
rgrover1 710:b2e1a2660ec2 307 * @param[out] deviceName
rgrover1 710:b2e1a2660ec2 308 * Pointer to an empty buffer where the UTF-8 *non NULL-
rgrover1 710:b2e1a2660ec2 309 * terminated* string will be placed. Set this
rgrover1 710:b2e1a2660ec2 310 * value to NULL in order to obtain the deviceName-length
rgrover1 710:b2e1a2660ec2 311 * from the 'length' parameter.
rgrover1 710:b2e1a2660ec2 312 *
rgrover1 710:b2e1a2660ec2 313 * @param[in/out] lengthP
rgrover1 710:b2e1a2660ec2 314 * (on input) Length of the buffer pointed to by deviceName;
rgrover1 710:b2e1a2660ec2 315 * (on output) the complete device name length (without the
rgrover1 710:b2e1a2660ec2 316 * null terminator).
rgrover1 710:b2e1a2660ec2 317 *
rgrover1 710:b2e1a2660ec2 318 * @note If the device name is longer than the size of the supplied buffer,
rgrover1 710:b2e1a2660ec2 319 * length will return the complete device name length, and not the
rgrover1 710:b2e1a2660ec2 320 * number of bytes actually returned in deviceName. The application may
rgrover1 710:b2e1a2660ec2 321 * use this information to retry with a suitable buffer size.
rgrover1 710:b2e1a2660ec2 322 */
rgrover1 710:b2e1a2660ec2 323 virtual ble_error_t getDeviceName(uint8_t *deviceName, unsigned *lengthP) {
rgrover1 727:1a1f5c5aedfe 324 return BLE_ERROR_NOT_IMPLEMENTED; /* default implementation; override this API if this capability is supported. */
rgrover1 710:b2e1a2660ec2 325 }
rgrover1 710:b2e1a2660ec2 326
rgrover1 710:b2e1a2660ec2 327 /**
rgrover1 710:b2e1a2660ec2 328 * Set the appearance characteristic in the GAP service.
rgrover1 710:b2e1a2660ec2 329 * @param[in] appearance
rgrover1 710:b2e1a2660ec2 330 * The new value for the device-appearance.
rgrover1 710:b2e1a2660ec2 331 */
rgrover1 710:b2e1a2660ec2 332 virtual ble_error_t setAppearance(GapAdvertisingData::Appearance appearance) {
rgrover1 727:1a1f5c5aedfe 333 return BLE_ERROR_NOT_IMPLEMENTED; /* default implementation; override this API if this capability is supported. */
rgrover1 710:b2e1a2660ec2 334 }
rgrover1 710:b2e1a2660ec2 335
rgrover1 710:b2e1a2660ec2 336 /**
rgrover1 710:b2e1a2660ec2 337 * Get the appearance characteristic in the GAP service.
rgrover1 710:b2e1a2660ec2 338 * @param[out] appearance
rgrover1 710:b2e1a2660ec2 339 * The new value for the device-appearance.
rgrover1 710:b2e1a2660ec2 340 */
rgrover1 710:b2e1a2660ec2 341 virtual ble_error_t getAppearance(GapAdvertisingData::Appearance *appearanceP) {
rgrover1 727:1a1f5c5aedfe 342 return BLE_ERROR_NOT_IMPLEMENTED; /* default implementation; override this API if this capability is supported. */
rgrover1 710:b2e1a2660ec2 343 }
rgrover1 710:b2e1a2660ec2 344
rgrover1 710:b2e1a2660ec2 345 /**
rgrover1 710:b2e1a2660ec2 346 * Set the radio's transmit power.
rgrover1 710:b2e1a2660ec2 347 * @param[in] txPower Radio transmit power in dBm.
rgrover1 710:b2e1a2660ec2 348 */
rgrover1 710:b2e1a2660ec2 349 virtual ble_error_t setTxPower(int8_t txPower) {
rgrover1 727:1a1f5c5aedfe 350 return BLE_ERROR_NOT_IMPLEMENTED; /* default implementation; override this API if this capability is supported. */
rgrover1 710:b2e1a2660ec2 351 }
rgrover1 710:b2e1a2660ec2 352
rgrover1 710:b2e1a2660ec2 353 /**
rgrover1 710:b2e1a2660ec2 354 * Query the underlying stack for permitted arguments for setTxPower().
rgrover1 710:b2e1a2660ec2 355 *
rgrover1 710:b2e1a2660ec2 356 * @param[out] valueArrayPP
rgrover1 710:b2e1a2660ec2 357 * Out parameter to receive the immutable array of Tx values.
rgrover1 710:b2e1a2660ec2 358 * @param[out] countP
rgrover1 710:b2e1a2660ec2 359 * Out parameter to receive the array's size.
rgrover1 710:b2e1a2660ec2 360 */
rgrover1 710:b2e1a2660ec2 361 virtual void getPermittedTxPowerValues(const int8_t **valueArrayPP, size_t *countP) {
rgrover1 710:b2e1a2660ec2 362 *countP = 0; /* default implementation; override this API if this capability is supported. */
rgrover1 710:b2e1a2660ec2 363 }
rgrover1 710:b2e1a2660ec2 364
rgrover1 710:b2e1a2660ec2 365 protected:
rgrover1 710:b2e1a2660ec2 366 /* Override the following in the underlying adaptation layer to provide the functionality of scanning. */
rgrover1 710:b2e1a2660ec2 367 virtual ble_error_t startRadioScan(const GapScanningParams &scanningParams) {
rgrover1 727:1a1f5c5aedfe 368 return BLE_ERROR_NOT_IMPLEMENTED; /* default implementation; override this API if this capability is supported. */
rgrover1 710:b2e1a2660ec2 369 }
rgrover1 710:b2e1a2660ec2 370
rgrover1 710:b2e1a2660ec2 371 /*
rgrover1 710:b2e1a2660ec2 372 * APIs with non-virtual implementations.
rgrover1 710:b2e1a2660ec2 373 */
rgrover1 710:b2e1a2660ec2 374 public:
rgrover1 710:b2e1a2660ec2 375 /**
rgrover1 710:b2e1a2660ec2 376 * Returns the current GAP state of the device using a bitmask which
rgrover1 710:b2e1a2660ec2 377 * describes whether the device is advertising and/or connected.
rgrover1 710:b2e1a2660ec2 378 */
rgrover1 710:b2e1a2660ec2 379 GapState_t getState(void) const {
rgrover1 710:b2e1a2660ec2 380 return state;
rgrover1 710:b2e1a2660ec2 381 }
rgrover1 710:b2e1a2660ec2 382
rgrover1 710:b2e1a2660ec2 383 /**
rgrover1 710:b2e1a2660ec2 384 * Set the GAP advertising mode to use for this device.
rgrover1 710:b2e1a2660ec2 385 */
rgrover1 710:b2e1a2660ec2 386 void setAdvertisingType(GapAdvertisingParams::AdvertisingType_t advType) {
rgrover1 710:b2e1a2660ec2 387 _advParams.setAdvertisingType(advType);
rgrover1 710:b2e1a2660ec2 388 }
rgrover1 710:b2e1a2660ec2 389
rgrover1 710:b2e1a2660ec2 390 /**
rgrover1 710:b2e1a2660ec2 391 * @param[in] interval
rgrover1 710:b2e1a2660ec2 392 * Advertising interval in units of milliseconds. Advertising
rgrover1 710:b2e1a2660ec2 393 * is disabled if interval is 0. If interval is smaller than
rgrover1 710:b2e1a2660ec2 394 * the minimum supported value, then the minimum supported
rgrover1 710:b2e1a2660ec2 395 * value is used instead. This minimum value can be discovered
rgrover1 710:b2e1a2660ec2 396 * using getMinAdvertisingInterval().
rgrover1 710:b2e1a2660ec2 397 *
rgrover1 710:b2e1a2660ec2 398 * This field must be set to 0 if connectionMode is equal
rgrover1 710:b2e1a2660ec2 399 * to ADV_CONNECTABLE_DIRECTED.
rgrover1 710:b2e1a2660ec2 400 *
rgrover1 710:b2e1a2660ec2 401 * @note: Decreasing this value will allow central devices to detect a
rgrover1 710:b2e1a2660ec2 402 * peripheral faster at the expense of more power being used by the radio
rgrover1 710:b2e1a2660ec2 403 * due to the higher data transmit rate.
rgrover1 710:b2e1a2660ec2 404 *
rgrover1 710:b2e1a2660ec2 405 * @note: This API is now *deprecated* and will be dropped in the future.
rgrover1 710:b2e1a2660ec2 406 * You should use the parallel API from Gap directly. A former call to
rgrover1 710:b2e1a2660ec2 407 * ble.setAdvertisingInterval(...) should now be achieved using
rgrover1 710:b2e1a2660ec2 408 * ble.gap().setAdvertisingInterval(...).
rgrover1 710:b2e1a2660ec2 409 *
rgrover1 710:b2e1a2660ec2 410 * @Note: [WARNING] This API previously used 0.625ms as the unit for its
rgrover1 710:b2e1a2660ec2 411 * 'interval' argument. That required an explicit conversion from
rgrover1 710:b2e1a2660ec2 412 * milliseconds using Gap::MSEC_TO_GAP_DURATION_UNITS(). This conversion is
rgrover1 710:b2e1a2660ec2 413 * no longer required as the new units are milliseconds. Any application
rgrover1 710:b2e1a2660ec2 414 * code depending on the old semantics would need to be updated accordingly.
rgrover1 710:b2e1a2660ec2 415 */
rgrover1 710:b2e1a2660ec2 416 void setAdvertisingInterval(uint16_t interval) {
rgrover1 710:b2e1a2660ec2 417 if (interval == 0) {
rgrover1 710:b2e1a2660ec2 418 stopAdvertising();
rgrover1 710:b2e1a2660ec2 419 } else if (interval < getMinAdvertisingInterval()) {
rgrover1 710:b2e1a2660ec2 420 interval = getMinAdvertisingInterval();
rgrover1 710:b2e1a2660ec2 421 }
rgrover1 710:b2e1a2660ec2 422 _advParams.setInterval(MSEC_TO_ADVERTISEMENT_DURATION_UNITS(interval));
rgrover1 710:b2e1a2660ec2 423 }
rgrover1 710:b2e1a2660ec2 424
rgrover1 710:b2e1a2660ec2 425 /**
rgrover1 710:b2e1a2660ec2 426 * @param[in] timeout
rgrover1 710:b2e1a2660ec2 427 * Advertising timeout (in seconds) between 0x1 and 0x3FFF (1
rgrover1 710:b2e1a2660ec2 428 * and 16383). Use 0 to disable the advertising timeout.
rgrover1 710:b2e1a2660ec2 429 */
rgrover1 710:b2e1a2660ec2 430 void setAdvertisingTimeout(uint16_t timeout) {
rgrover1 710:b2e1a2660ec2 431 _advParams.setTimeout(timeout);
rgrover1 710:b2e1a2660ec2 432 }
rgrover1 710:b2e1a2660ec2 433
rgrover1 710:b2e1a2660ec2 434 /**
rgrover1 710:b2e1a2660ec2 435 * Start advertising.
rgrover1 710:b2e1a2660ec2 436 */
rgrover1 710:b2e1a2660ec2 437 ble_error_t startAdvertising(void) {
rgrover1 710:b2e1a2660ec2 438 setAdvertisingData(); /* update the underlying stack */
rgrover1 710:b2e1a2660ec2 439 return startAdvertising(_advParams);
rgrover1 710:b2e1a2660ec2 440 }
rgrover1 710:b2e1a2660ec2 441
rgrover1 710:b2e1a2660ec2 442 /**
rgrover1 710:b2e1a2660ec2 443 * Reset any advertising payload prepared from prior calls to
rgrover1 710:b2e1a2660ec2 444 * accumulateAdvertisingPayload(). This automatically propagates the re-
rgrover1 710:b2e1a2660ec2 445 * initialized adv payload to the underlying stack.
rgrover1 710:b2e1a2660ec2 446 *
rgrover1 710:b2e1a2660ec2 447 * Note: This should be followed by a call to setAdvertisingPayload() or
rgrover1 710:b2e1a2660ec2 448 * startAdvertising() before the update takes effect.
rgrover1 710:b2e1a2660ec2 449 */
rgrover1 710:b2e1a2660ec2 450 void clearAdvertisingPayload(void) {
rgrover1 710:b2e1a2660ec2 451 _advPayload.clear();
rgrover1 710:b2e1a2660ec2 452 setAdvertisingData();
rgrover1 710:b2e1a2660ec2 453 }
rgrover1 710:b2e1a2660ec2 454
rgrover1 710:b2e1a2660ec2 455 /**
rgrover1 710:b2e1a2660ec2 456 * Accumulate an AD structure in the advertising payload. Please note that
rgrover1 710:b2e1a2660ec2 457 * the payload is limited to 31 bytes. The SCAN_RESPONSE message may be used
rgrover1 710:b2e1a2660ec2 458 * as an additional 31 bytes if the advertising payload proves to be too
rgrover1 710:b2e1a2660ec2 459 * small.
rgrover1 710:b2e1a2660ec2 460 *
rgrover1 710:b2e1a2660ec2 461 * @param[in] flags
rgrover1 710:b2e1a2660ec2 462 * The flags to be added. Please refer to
rgrover1 710:b2e1a2660ec2 463 * GapAdvertisingData::Flags for valid flags. Multiple
rgrover1 710:b2e1a2660ec2 464 * flags may be specified in combination.
rgrover1 710:b2e1a2660ec2 465 */
rgrover1 710:b2e1a2660ec2 466 ble_error_t accumulateAdvertisingPayload(uint8_t flags) {
rgrover1 710:b2e1a2660ec2 467 ble_error_t rc;
rgrover1 710:b2e1a2660ec2 468 if ((rc = _advPayload.addFlags(flags)) != BLE_ERROR_NONE) {
rgrover1 710:b2e1a2660ec2 469 return rc;
rgrover1 710:b2e1a2660ec2 470 }
rgrover1 710:b2e1a2660ec2 471
rgrover1 710:b2e1a2660ec2 472 return setAdvertisingData();
rgrover1 710:b2e1a2660ec2 473 }
rgrover1 710:b2e1a2660ec2 474
rgrover1 710:b2e1a2660ec2 475 /**
rgrover1 710:b2e1a2660ec2 476 * Accumulate an AD structure in the advertising payload. Please note that
rgrover1 710:b2e1a2660ec2 477 * the payload is limited to 31 bytes. The SCAN_RESPONSE message may be used
rgrover1 710:b2e1a2660ec2 478 * as an additional 31 bytes if the advertising payload proves to be too
rgrover1 710:b2e1a2660ec2 479 * small.
rgrover1 710:b2e1a2660ec2 480 *
rgrover1 710:b2e1a2660ec2 481 * @param app
rgrover1 710:b2e1a2660ec2 482 * The appearance of the peripheral.
rgrover1 710:b2e1a2660ec2 483 */
rgrover1 710:b2e1a2660ec2 484 ble_error_t accumulateAdvertisingPayload(GapAdvertisingData::Appearance app) {
rgrover1 710:b2e1a2660ec2 485 setAppearance(app);
rgrover1 710:b2e1a2660ec2 486
rgrover1 710:b2e1a2660ec2 487 ble_error_t rc;
rgrover1 710:b2e1a2660ec2 488 if ((rc = _advPayload.addAppearance(app)) != BLE_ERROR_NONE) {
rgrover1 710:b2e1a2660ec2 489 return rc;
rgrover1 710:b2e1a2660ec2 490 }
rgrover1 710:b2e1a2660ec2 491
rgrover1 710:b2e1a2660ec2 492 return setAdvertisingData();
rgrover1 710:b2e1a2660ec2 493 }
rgrover1 710:b2e1a2660ec2 494
rgrover1 710:b2e1a2660ec2 495 /**
rgrover1 710:b2e1a2660ec2 496 * Accumulate an AD structure in the advertising payload. Please note that
rgrover1 710:b2e1a2660ec2 497 * the payload is limited to 31 bytes. The SCAN_RESPONSE message may be used
rgrover1 710:b2e1a2660ec2 498 * as an additional 31 bytes if the advertising payload proves to be too
rgrover1 710:b2e1a2660ec2 499 * small.
rgrover1 710:b2e1a2660ec2 500 *
rgrover1 710:b2e1a2660ec2 501 * @param app
rgrover1 710:b2e1a2660ec2 502 * The max transmit power to be used by the controller. This is
rgrover1 710:b2e1a2660ec2 503 * only a hint.
rgrover1 710:b2e1a2660ec2 504 */
rgrover1 710:b2e1a2660ec2 505 ble_error_t accumulateAdvertisingPayloadTxPower(int8_t power) {
rgrover1 710:b2e1a2660ec2 506 ble_error_t rc;
rgrover1 710:b2e1a2660ec2 507 if ((rc = _advPayload.addTxPower(power)) != BLE_ERROR_NONE) {
rgrover1 710:b2e1a2660ec2 508 return rc;
rgrover1 710:b2e1a2660ec2 509 }
rgrover1 710:b2e1a2660ec2 510
rgrover1 710:b2e1a2660ec2 511 return setAdvertisingData();
rgrover1 710:b2e1a2660ec2 512 }
rgrover1 710:b2e1a2660ec2 513
rgrover1 710:b2e1a2660ec2 514 /**
rgrover1 710:b2e1a2660ec2 515 * Accumulate a variable length byte-stream as an AD structure in the
rgrover1 710:b2e1a2660ec2 516 * advertising payload. Please note that the payload is limited to 31 bytes.
rgrover1 710:b2e1a2660ec2 517 * The SCAN_RESPONSE message may be used as an additional 31 bytes if the
rgrover1 710:b2e1a2660ec2 518 * advertising payload proves to be too small.
rgrover1 710:b2e1a2660ec2 519 *
rgrover1 710:b2e1a2660ec2 520 * @param type The type which describes the variable length data.
rgrover1 710:b2e1a2660ec2 521 * @param data data bytes.
rgrover1 710:b2e1a2660ec2 522 * @param len length of data.
rgrover1 710:b2e1a2660ec2 523 */
rgrover1 710:b2e1a2660ec2 524 ble_error_t accumulateAdvertisingPayload(GapAdvertisingData::DataType type, const uint8_t *data, uint8_t len) {
rgrover1 710:b2e1a2660ec2 525 if (type == GapAdvertisingData::COMPLETE_LOCAL_NAME) {
rgrover1 710:b2e1a2660ec2 526 setDeviceName(data);
rgrover1 710:b2e1a2660ec2 527 }
rgrover1 710:b2e1a2660ec2 528
rgrover1 710:b2e1a2660ec2 529 ble_error_t rc;
rgrover1 710:b2e1a2660ec2 530 if ((rc = _advPayload.addData(type, data, len)) != BLE_ERROR_NONE) {
rgrover1 710:b2e1a2660ec2 531 return rc;
rgrover1 710:b2e1a2660ec2 532 }
rgrover1 710:b2e1a2660ec2 533
rgrover1 710:b2e1a2660ec2 534 return setAdvertisingData();
rgrover1 710:b2e1a2660ec2 535 }
rgrover1 710:b2e1a2660ec2 536
rgrover1 710:b2e1a2660ec2 537 /**
rgrover1 710:b2e1a2660ec2 538 * Setup a particular, user-constructed advertisement payload for the
rgrover1 710:b2e1a2660ec2 539 * underlying stack. It would be uncommon for this API to be used directly;
rgrover1 710:b2e1a2660ec2 540 * there are other APIs to build an advertisement payload (see above).
rgrover1 710:b2e1a2660ec2 541 */
rgrover1 710:b2e1a2660ec2 542 ble_error_t setAdvertisingPayload(const GapAdvertisingData &payload) {
rgrover1 710:b2e1a2660ec2 543 _advPayload = payload;
rgrover1 710:b2e1a2660ec2 544 return setAdvertisingData();
rgrover1 710:b2e1a2660ec2 545 }
rgrover1 710:b2e1a2660ec2 546
rgrover1 710:b2e1a2660ec2 547 /**
rgrover1 710:b2e1a2660ec2 548 * @return Read back advertising data. Useful for storing and
rgrover1 710:b2e1a2660ec2 549 * restoring payload.
rgrover1 710:b2e1a2660ec2 550 */
rgrover1 710:b2e1a2660ec2 551 const GapAdvertisingData &getAdvertisingPayload(void) const {
rgrover1 710:b2e1a2660ec2 552 return _advPayload;
rgrover1 710:b2e1a2660ec2 553 }
rgrover1 710:b2e1a2660ec2 554
rgrover1 710:b2e1a2660ec2 555 /**
rgrover1 710:b2e1a2660ec2 556 * Accumulate a variable length byte-stream as an AD structure in the
rgrover1 710:b2e1a2660ec2 557 * scanResponse payload.
rgrover1 710:b2e1a2660ec2 558 *
rgrover1 710:b2e1a2660ec2 559 * @param[in] type The type which describes the variable length data.
rgrover1 710:b2e1a2660ec2 560 * @param[in] data data bytes.
rgrover1 710:b2e1a2660ec2 561 * @param[in] len length of data.
rgrover1 710:b2e1a2660ec2 562 */
rgrover1 710:b2e1a2660ec2 563 ble_error_t accumulateScanResponse(GapAdvertisingData::DataType type, const uint8_t *data, uint8_t len) {
rgrover1 710:b2e1a2660ec2 564 ble_error_t rc;
rgrover1 710:b2e1a2660ec2 565 if ((rc = _scanResponse.addData(type, data, len)) != BLE_ERROR_NONE) {
rgrover1 710:b2e1a2660ec2 566 return rc;
rgrover1 710:b2e1a2660ec2 567 }
rgrover1 710:b2e1a2660ec2 568
rgrover1 710:b2e1a2660ec2 569 return setAdvertisingData();
rgrover1 710:b2e1a2660ec2 570 }
rgrover1 710:b2e1a2660ec2 571
rgrover1 710:b2e1a2660ec2 572 /**
rgrover1 710:b2e1a2660ec2 573 * Reset any scan response prepared from prior calls to
rgrover1 710:b2e1a2660ec2 574 * accumulateScanResponse().
rgrover1 710:b2e1a2660ec2 575 *
rgrover1 710:b2e1a2660ec2 576 * Note: This should be followed by a call to setAdvertisingPayload() or
rgrover1 710:b2e1a2660ec2 577 * startAdvertising() before the update takes effect.
rgrover1 710:b2e1a2660ec2 578 */
rgrover1 710:b2e1a2660ec2 579 void clearScanResponse(void) {
rgrover1 710:b2e1a2660ec2 580 _scanResponse.clear();
rgrover1 710:b2e1a2660ec2 581 setAdvertisingData();
rgrover1 710:b2e1a2660ec2 582 }
rgrover1 710:b2e1a2660ec2 583
rgrover1 710:b2e1a2660ec2 584 /**
rgrover1 710:b2e1a2660ec2 585 * Setup parameters for GAP scanning--i.e. observer mode.
rgrover1 710:b2e1a2660ec2 586 * @param[in] interval
rgrover1 710:b2e1a2660ec2 587 * Scan interval (in milliseconds) [valid values lie between 2.5ms and 10.24s].
rgrover1 710:b2e1a2660ec2 588 * @param[in] window
rgrover1 710:b2e1a2660ec2 589 * Scan Window (in milliseconds) [valid values lie between 2.5ms and 10.24s].
rgrover1 710:b2e1a2660ec2 590 * @param[in] timeout
rgrover1 710:b2e1a2660ec2 591 * Scan timeout (in seconds) between 0x0001 and 0xFFFF, 0x0000 disables timeout.
rgrover1 710:b2e1a2660ec2 592 * @param[in] activeScanning
rgrover1 710:b2e1a2660ec2 593 * Set to True if active-scanning is required. This is used to fetch the
rgrover1 710:b2e1a2660ec2 594 * scan response from a peer if possible.
rgrover1 710:b2e1a2660ec2 595 *
rgrover1 710:b2e1a2660ec2 596 * The scanning window divided by the interval determines the duty cycle for
rgrover1 710:b2e1a2660ec2 597 * scanning. For example, if the interval is 100ms and the window is 10ms,
rgrover1 710:b2e1a2660ec2 598 * then the controller will scan for 10 percent of the time. It is possible
rgrover1 710:b2e1a2660ec2 599 * to have the interval and window set to the same value. In this case,
rgrover1 710:b2e1a2660ec2 600 * scanning is continuous, with a change of scanning frequency once every
rgrover1 710:b2e1a2660ec2 601 * interval.
rgrover1 710:b2e1a2660ec2 602 *
rgrover1 710:b2e1a2660ec2 603 * Once the scanning parameters have been configured, scanning can be
rgrover1 710:b2e1a2660ec2 604 * enabled by using startScan().
rgrover1 710:b2e1a2660ec2 605 *
rgrover1 710:b2e1a2660ec2 606 * @Note: The scan interval and window are recommendations to the BLE stack.
rgrover1 710:b2e1a2660ec2 607 */
rgrover1 710:b2e1a2660ec2 608 ble_error_t setScanParams(uint16_t interval = GapScanningParams::SCAN_INTERVAL_MAX,
rgrover1 710:b2e1a2660ec2 609 uint16_t window = GapScanningParams::SCAN_WINDOW_MAX,
rgrover1 710:b2e1a2660ec2 610 uint16_t timeout = 0,
rgrover1 710:b2e1a2660ec2 611 bool activeScanning = false) {
rgrover1 710:b2e1a2660ec2 612 ble_error_t rc;
rgrover1 710:b2e1a2660ec2 613 if (((rc = _scanningParams.setInterval(interval)) == BLE_ERROR_NONE) &&
rgrover1 710:b2e1a2660ec2 614 ((rc = _scanningParams.setWindow(window)) == BLE_ERROR_NONE) &&
rgrover1 710:b2e1a2660ec2 615 ((rc = _scanningParams.setTimeout(timeout)) == BLE_ERROR_NONE)) {
rgrover1 710:b2e1a2660ec2 616 _scanningParams.setActiveScanning(activeScanning);
rgrover1 710:b2e1a2660ec2 617 return BLE_ERROR_NONE;
rgrover1 710:b2e1a2660ec2 618 }
rgrover1 710:b2e1a2660ec2 619
rgrover1 710:b2e1a2660ec2 620 return rc;
rgrover1 710:b2e1a2660ec2 621 }
rgrover1 710:b2e1a2660ec2 622
rgrover1 710:b2e1a2660ec2 623 /**
rgrover1 710:b2e1a2660ec2 624 * Setup the scanInterval parameter for GAP scanning--i.e. observer mode.
rgrover1 710:b2e1a2660ec2 625 * @param[in] interval
rgrover1 710:b2e1a2660ec2 626 * Scan interval (in milliseconds) [valid values lie between 2.5ms and 10.24s].
rgrover1 710:b2e1a2660ec2 627 *
rgrover1 710:b2e1a2660ec2 628 * The scanning window divided by the interval determines the duty cycle for
rgrover1 710:b2e1a2660ec2 629 * scanning. For example, if the interval is 100ms and the window is 10ms,
rgrover1 710:b2e1a2660ec2 630 * then the controller will scan for 10 percent of the time. It is possible
rgrover1 710:b2e1a2660ec2 631 * to have the interval and window set to the same value. In this case,
rgrover1 710:b2e1a2660ec2 632 * scanning is continuous, with a change of scanning frequency once every
rgrover1 710:b2e1a2660ec2 633 * interval.
rgrover1 710:b2e1a2660ec2 634 *
rgrover1 710:b2e1a2660ec2 635 * Once the scanning parameters have been configured, scanning can be
rgrover1 710:b2e1a2660ec2 636 * enabled by using startScan().
rgrover1 710:b2e1a2660ec2 637 */
rgrover1 710:b2e1a2660ec2 638 ble_error_t setScanInterval(uint16_t interval) {
rgrover1 710:b2e1a2660ec2 639 return _scanningParams.setInterval(interval);
rgrover1 710:b2e1a2660ec2 640 }
rgrover1 710:b2e1a2660ec2 641
rgrover1 710:b2e1a2660ec2 642 /**
rgrover1 710:b2e1a2660ec2 643 * Setup the scanWindow parameter for GAP scanning--i.e. observer mode.
rgrover1 710:b2e1a2660ec2 644 * @param[in] window
rgrover1 710:b2e1a2660ec2 645 * Scan Window (in milliseconds) [valid values lie between 2.5ms and 10.24s].
rgrover1 710:b2e1a2660ec2 646 *
rgrover1 710:b2e1a2660ec2 647 * The scanning window divided by the interval determines the duty cycle for
rgrover1 710:b2e1a2660ec2 648 * scanning. For example, if the interval is 100ms and the window is 10ms,
rgrover1 710:b2e1a2660ec2 649 * then the controller will scan for 10 percent of the time. It is possible
rgrover1 710:b2e1a2660ec2 650 * to have the interval and window set to the same value. In this case,
rgrover1 710:b2e1a2660ec2 651 * scanning is continuous, with a change of scanning frequency once every
rgrover1 710:b2e1a2660ec2 652 * interval.
rgrover1 710:b2e1a2660ec2 653 *
rgrover1 710:b2e1a2660ec2 654 * Once the scanning parameters have been configured, scanning can be
rgrover1 710:b2e1a2660ec2 655 * enabled by using startScan().
rgrover1 710:b2e1a2660ec2 656 */
rgrover1 710:b2e1a2660ec2 657 ble_error_t setScanWindow(uint16_t window) {
rgrover1 710:b2e1a2660ec2 658 return _scanningParams.setWindow(window);
rgrover1 710:b2e1a2660ec2 659 }
rgrover1 710:b2e1a2660ec2 660
rgrover1 710:b2e1a2660ec2 661 /**
rgrover1 710:b2e1a2660ec2 662 * Setup parameters for GAP scanning--i.e. observer mode.
rgrover1 710:b2e1a2660ec2 663 * @param[in] timeout
rgrover1 710:b2e1a2660ec2 664 * Scan timeout (in seconds) between 0x0001 and 0xFFFF, 0x0000 disables timeout.
rgrover1 710:b2e1a2660ec2 665 *
rgrover1 710:b2e1a2660ec2 666 * Once the scanning parameters have been configured, scanning can be
rgrover1 710:b2e1a2660ec2 667 * enabled by using startScan().
rgrover1 710:b2e1a2660ec2 668 */
rgrover1 710:b2e1a2660ec2 669 ble_error_t setScanTimeout(uint16_t timeout) {
rgrover1 710:b2e1a2660ec2 670 return _scanningParams.setTimeout(timeout);
rgrover1 710:b2e1a2660ec2 671 }
rgrover1 710:b2e1a2660ec2 672
rgrover1 710:b2e1a2660ec2 673 /**
rgrover1 710:b2e1a2660ec2 674 * Setup parameters for GAP scanning--i.e. observer mode.
rgrover1 710:b2e1a2660ec2 675 * @param[in] activeScanning
rgrover1 710:b2e1a2660ec2 676 * Set to True if active-scanning is required. This is used to fetch the
rgrover1 710:b2e1a2660ec2 677 * scan response from a peer if possible.
rgrover1 710:b2e1a2660ec2 678 *
rgrover1 710:b2e1a2660ec2 679 * Once the scanning parameters have been configured, scanning can be
rgrover1 710:b2e1a2660ec2 680 * enabled by using startScan().
rgrover1 710:b2e1a2660ec2 681 */
rgrover1 710:b2e1a2660ec2 682 void setActiveScanning(bool activeScanning) {
rgrover1 710:b2e1a2660ec2 683 _scanningParams.setActiveScanning(activeScanning);
rgrover1 710:b2e1a2660ec2 684 }
rgrover1 710:b2e1a2660ec2 685
rgrover1 710:b2e1a2660ec2 686 /**
rgrover1 710:b2e1a2660ec2 687 * Start scanning (Observer Procedure) based on the parameters currently in
rgrover1 710:b2e1a2660ec2 688 * effect.
rgrover1 710:b2e1a2660ec2 689 *
rgrover1 710:b2e1a2660ec2 690 * @param[in] callback
rgrover1 710:b2e1a2660ec2 691 * The application specific callback to be invoked upon
rgrover1 710:b2e1a2660ec2 692 * receiving every advertisement report. This can be passed in
rgrover1 710:b2e1a2660ec2 693 * as NULL, in which case scanning may not be enabled at all.
rgrover1 710:b2e1a2660ec2 694 */
rgrover1 710:b2e1a2660ec2 695 ble_error_t startScan(void (*callback)(const AdvertisementCallbackParams_t *params)) {
rgrover1 710:b2e1a2660ec2 696 ble_error_t err = BLE_ERROR_NONE;
rgrover1 710:b2e1a2660ec2 697 if (callback) {
rgrover1 710:b2e1a2660ec2 698 if ((err = startRadioScan(_scanningParams)) == BLE_ERROR_NONE) {
rgrover1 710:b2e1a2660ec2 699 onAdvertisementReport.attach(callback);
rgrover1 710:b2e1a2660ec2 700 }
rgrover1 710:b2e1a2660ec2 701 }
rgrover1 710:b2e1a2660ec2 702
rgrover1 710:b2e1a2660ec2 703 return err;
rgrover1 710:b2e1a2660ec2 704 }
rgrover1 710:b2e1a2660ec2 705
rgrover1 710:b2e1a2660ec2 706 /**
rgrover1 710:b2e1a2660ec2 707 * Same as above, but this takes an (object, method) pair for a callback.
rgrover1 710:b2e1a2660ec2 708 */
rgrover1 710:b2e1a2660ec2 709 template<typename T>
rgrover1 710:b2e1a2660ec2 710 ble_error_t startScan(T *object, void (T::*callbackMember)(const AdvertisementCallbackParams_t *params)) {
rgrover1 710:b2e1a2660ec2 711 ble_error_t err = BLE_ERROR_NONE;
rgrover1 710:b2e1a2660ec2 712 if (object && callbackMember) {
rgrover1 710:b2e1a2660ec2 713 if ((err = startRadioScan(_scanningParams)) == BLE_ERROR_NONE) {
rgrover1 710:b2e1a2660ec2 714 onAdvertisementReport.attach(object, callbackMember);
rgrover1 710:b2e1a2660ec2 715 }
rgrover1 710:b2e1a2660ec2 716 }
rgrover1 710:b2e1a2660ec2 717
rgrover1 710:b2e1a2660ec2 718 return err;
rgrover1 710:b2e1a2660ec2 719 }
rgrover1 710:b2e1a2660ec2 720
rgrover1 710:b2e1a2660ec2 721 private:
rgrover1 710:b2e1a2660ec2 722 ble_error_t setAdvertisingData(void) {
rgrover1 710:b2e1a2660ec2 723 return setAdvertisingData(_advPayload, _scanResponse);
rgrover1 710:b2e1a2660ec2 724 }
rgrover1 710:b2e1a2660ec2 725
rgrover1 710:b2e1a2660ec2 726 private:
rgrover1 710:b2e1a2660ec2 727 virtual ble_error_t setAdvertisingData(const GapAdvertisingData &, const GapAdvertisingData &) = 0;
rgrover1 710:b2e1a2660ec2 728 virtual ble_error_t startAdvertising(const GapAdvertisingParams &) = 0;
rgrover1 710:b2e1a2660ec2 729
rgrover1 710:b2e1a2660ec2 730 public:
rgrover1 710:b2e1a2660ec2 731 /**
rgrover1 710:b2e1a2660ec2 732 * Accessors to read back currently active advertising params.
rgrover1 710:b2e1a2660ec2 733 */
rgrover1 710:b2e1a2660ec2 734 GapAdvertisingParams &getAdvertisingParams(void) {
rgrover1 710:b2e1a2660ec2 735 return _advParams;
rgrover1 710:b2e1a2660ec2 736 }
rgrover1 710:b2e1a2660ec2 737 const GapAdvertisingParams &getAdvertisingParams(void) const {
rgrover1 710:b2e1a2660ec2 738 return _advParams;
rgrover1 710:b2e1a2660ec2 739 }
rgrover1 710:b2e1a2660ec2 740
rgrover1 710:b2e1a2660ec2 741 /**
rgrover1 710:b2e1a2660ec2 742 * Setup a particular, user-constructed set of advertisement parameters for
rgrover1 710:b2e1a2660ec2 743 * the underlying stack. It would be uncommon for this API to be used
rgrover1 710:b2e1a2660ec2 744 * directly; there are other APIs to tweak advertisement parameters
rgrover1 710:b2e1a2660ec2 745 * individually.
rgrover1 710:b2e1a2660ec2 746 */
rgrover1 710:b2e1a2660ec2 747 void setAdvertisingParams(const GapAdvertisingParams &newParams) {
rgrover1 710:b2e1a2660ec2 748 _advParams = newParams;
rgrover1 710:b2e1a2660ec2 749 }
rgrover1 710:b2e1a2660ec2 750
rgrover1 710:b2e1a2660ec2 751 /* Event callback handlers. */
rgrover1 710:b2e1a2660ec2 752 public:
rgrover1 710:b2e1a2660ec2 753 /**
rgrover1 710:b2e1a2660ec2 754 * Setup a callback for timeout events. Refer to TimeoutSource_t for
rgrover1 710:b2e1a2660ec2 755 * possible event types.
rgrover1 710:b2e1a2660ec2 756 */
rgrover1 710:b2e1a2660ec2 757 void onTimeout(TimeoutEventCallback_t callback) {timeoutCallback = callback;}
rgrover1 710:b2e1a2660ec2 758
rgrover1 710:b2e1a2660ec2 759 /**
rgrover1 710:b2e1a2660ec2 760 * Setup a callback for connection events. Refer to ConnectionEventCallback_t.
rgrover1 710:b2e1a2660ec2 761 */
rgrover1 710:b2e1a2660ec2 762 void onConnection(ConnectionEventCallback_t callback) {connectionCallback = callback;}
rgrover1 710:b2e1a2660ec2 763
rgrover1 710:b2e1a2660ec2 764 /**
rgrover1 710:b2e1a2660ec2 765 * Set the application callback for disconnection events.
rgrover1 710:b2e1a2660ec2 766 * @param callback
rgrover1 710:b2e1a2660ec2 767 * Pointer to the unique callback.
rgrover1 710:b2e1a2660ec2 768 */
rgrover1 710:b2e1a2660ec2 769 void onDisconnection(DisconnectionEventCallback_t callback) {disconnectionCallback = callback;}
rgrover1 710:b2e1a2660ec2 770
rgrover1 710:b2e1a2660ec2 771 /**
rgrover1 710:b2e1a2660ec2 772 * Append to a chain of callbacks to be invoked upon disconnection; these
rgrover1 710:b2e1a2660ec2 773 * callbacks receive no context and are therefore different from the
rgrover1 710:b2e1a2660ec2 774 * disconnectionCallback callback.
rgrover1 710:b2e1a2660ec2 775 * @param callback
rgrover1 710:b2e1a2660ec2 776 * function pointer to be invoked upon disconnection; receives no context.
rgrover1 710:b2e1a2660ec2 777 */
rgrover1 710:b2e1a2660ec2 778 template<typename T>
rgrover1 710:b2e1a2660ec2 779 void addToDisconnectionCallChain(T *tptr, void (T::*mptr)(void)) {disconnectionCallChain.add(tptr, mptr);}
rgrover1 710:b2e1a2660ec2 780
rgrover1 710:b2e1a2660ec2 781 /**
rgrover1 710:b2e1a2660ec2 782 * Set the application callback for radio-notification events.
rgrover1 710:b2e1a2660ec2 783 *
rgrover1 710:b2e1a2660ec2 784 * Radio Notification is a feature that enables ACTIVE and INACTIVE
rgrover1 710:b2e1a2660ec2 785 * (nACTIVE) signals from the stack that notify the application when the
rgrover1 710:b2e1a2660ec2 786 * radio is in use. The signal is sent using software interrupt.
rgrover1 710:b2e1a2660ec2 787 *
rgrover1 710:b2e1a2660ec2 788 * The ACTIVE signal is sent before the Radio Event starts. The nACTIVE
rgrover1 710:b2e1a2660ec2 789 * signal is sent at the end of the Radio Event. These signals can be used
rgrover1 710:b2e1a2660ec2 790 * by the application programmer to synchronize application logic with radio
rgrover1 710:b2e1a2660ec2 791 * activity. For example, the ACTIVE signal can be used to shut off external
rgrover1 710:b2e1a2660ec2 792 * devices to manage peak current drawn during periods when the radio is on,
rgrover1 710:b2e1a2660ec2 793 * or to trigger sensor data collection for transmission in the Radio Event.
rgrover1 710:b2e1a2660ec2 794 *
rgrover1 710:b2e1a2660ec2 795 * @param callback
rgrover1 710:b2e1a2660ec2 796 * The application handler to be invoked in response to a radio
rgrover1 710:b2e1a2660ec2 797 * ACTIVE/INACTIVE event.
rgrover1 710:b2e1a2660ec2 798 */
rgrover1 710:b2e1a2660ec2 799 virtual void onRadioNotification(RadioNotificationEventCallback_t callback) {radioNotificationCallback = callback;}
rgrover1 710:b2e1a2660ec2 800
rgrover1 710:b2e1a2660ec2 801 protected:
rgrover1 710:b2e1a2660ec2 802 Gap() :
rgrover1 710:b2e1a2660ec2 803 _advParams(),
rgrover1 710:b2e1a2660ec2 804 _advPayload(),
rgrover1 710:b2e1a2660ec2 805 _scanningParams(),
rgrover1 710:b2e1a2660ec2 806 _scanResponse(),
rgrover1 710:b2e1a2660ec2 807 state(),
rgrover1 710:b2e1a2660ec2 808 timeoutCallback(NULL),
rgrover1 710:b2e1a2660ec2 809 connectionCallback(NULL),
rgrover1 710:b2e1a2660ec2 810 disconnectionCallback(NULL),
rgrover1 710:b2e1a2660ec2 811 radioNotificationCallback(),
rgrover1 710:b2e1a2660ec2 812 onAdvertisementReport(),
rgrover1 710:b2e1a2660ec2 813 disconnectionCallChain() {
rgrover1 710:b2e1a2660ec2 814 _advPayload.clear();
rgrover1 710:b2e1a2660ec2 815 _scanResponse.clear();
rgrover1 710:b2e1a2660ec2 816 }
rgrover1 710:b2e1a2660ec2 817
rgrover1 710:b2e1a2660ec2 818 /* Entry points for the underlying stack to report events back to the user. */
rgrover1 710:b2e1a2660ec2 819 public:
rgrover1 710:b2e1a2660ec2 820 void processConnectionEvent(Handle_t handle,
rgrover1 710:b2e1a2660ec2 821 Role_t role,
rgrover1 710:b2e1a2660ec2 822 AddressType_t peerAddrType,
rgrover1 710:b2e1a2660ec2 823 const Address_t peerAddr,
rgrover1 710:b2e1a2660ec2 824 AddressType_t ownAddrType,
rgrover1 710:b2e1a2660ec2 825 const Address_t ownAddr,
rgrover1 710:b2e1a2660ec2 826 const ConnectionParams_t *connectionParams) {
rgrover1 710:b2e1a2660ec2 827 state.connected = 1;
rgrover1 710:b2e1a2660ec2 828 if (connectionCallback) {
rgrover1 710:b2e1a2660ec2 829 ConnectionCallbackParams_t callbackParams(handle, role, peerAddrType, peerAddr, ownAddrType, ownAddr, connectionParams);
rgrover1 710:b2e1a2660ec2 830 connectionCallback(&callbackParams);
rgrover1 710:b2e1a2660ec2 831 }
rgrover1 710:b2e1a2660ec2 832 }
rgrover1 710:b2e1a2660ec2 833
rgrover1 710:b2e1a2660ec2 834 void processDisconnectionEvent(Handle_t handle, DisconnectionReason_t reason) {
rgrover1 710:b2e1a2660ec2 835 state.connected = 0;
rgrover1 710:b2e1a2660ec2 836 if (disconnectionCallback) {
rgrover1 710:b2e1a2660ec2 837 disconnectionCallback(handle, reason);
rgrover1 710:b2e1a2660ec2 838 }
rgrover1 710:b2e1a2660ec2 839 disconnectionCallChain.call();
rgrover1 710:b2e1a2660ec2 840 }
rgrover1 710:b2e1a2660ec2 841
rgrover1 710:b2e1a2660ec2 842 void processAdvertisementReport(const Address_t peerAddr,
rgrover1 710:b2e1a2660ec2 843 int8_t rssi,
rgrover1 710:b2e1a2660ec2 844 bool isScanResponse,
rgrover1 710:b2e1a2660ec2 845 GapAdvertisingParams::AdvertisingType_t type,
rgrover1 710:b2e1a2660ec2 846 uint8_t advertisingDataLen,
rgrover1 710:b2e1a2660ec2 847 const uint8_t *advertisingData) {
rgrover1 710:b2e1a2660ec2 848 AdvertisementCallbackParams_t params;
rgrover1 710:b2e1a2660ec2 849 memcpy(params.peerAddr, peerAddr, ADDR_LEN);
rgrover1 710:b2e1a2660ec2 850 params.rssi = rssi;
rgrover1 710:b2e1a2660ec2 851 params.isScanResponse = isScanResponse;
rgrover1 710:b2e1a2660ec2 852 params.type = type;
rgrover1 710:b2e1a2660ec2 853 params.advertisingDataLen = advertisingDataLen;
rgrover1 710:b2e1a2660ec2 854 params.advertisingData = advertisingData;
rgrover1 710:b2e1a2660ec2 855 onAdvertisementReport.call(&params);
rgrover1 710:b2e1a2660ec2 856 }
rgrover1 710:b2e1a2660ec2 857
rgrover1 710:b2e1a2660ec2 858 void processTimeoutEvent(TimeoutSource_t source) {
rgrover1 710:b2e1a2660ec2 859 if (timeoutCallback) {
rgrover1 710:b2e1a2660ec2 860 timeoutCallback(source);
rgrover1 710:b2e1a2660ec2 861 }
rgrover1 710:b2e1a2660ec2 862 }
rgrover1 710:b2e1a2660ec2 863
rgrover1 710:b2e1a2660ec2 864 protected:
rgrover1 710:b2e1a2660ec2 865 GapAdvertisingParams _advParams;
rgrover1 710:b2e1a2660ec2 866 GapAdvertisingData _advPayload;
rgrover1 710:b2e1a2660ec2 867 GapScanningParams _scanningParams;
rgrover1 710:b2e1a2660ec2 868 GapAdvertisingData _scanResponse;
rgrover1 710:b2e1a2660ec2 869
rgrover1 710:b2e1a2660ec2 870 GapState_t state;
rgrover1 710:b2e1a2660ec2 871
rgrover1 710:b2e1a2660ec2 872 protected:
rgrover1 710:b2e1a2660ec2 873 TimeoutEventCallback_t timeoutCallback;
rgrover1 710:b2e1a2660ec2 874 ConnectionEventCallback_t connectionCallback;
rgrover1 710:b2e1a2660ec2 875 DisconnectionEventCallback_t disconnectionCallback;
rgrover1 710:b2e1a2660ec2 876 RadioNotificationEventCallback_t radioNotificationCallback;
rgrover1 710:b2e1a2660ec2 877 AdvertisementReportCallback_t onAdvertisementReport;
rgrover1 710:b2e1a2660ec2 878 CallChain disconnectionCallChain;
rgrover1 710:b2e1a2660ec2 879
rgrover1 710:b2e1a2660ec2 880 private:
rgrover1 710:b2e1a2660ec2 881 /* disallow copy and assignment */
rgrover1 710:b2e1a2660ec2 882 Gap(const Gap &);
rgrover1 710:b2e1a2660ec2 883 Gap& operator=(const Gap &);
rgrover1 710:b2e1a2660ec2 884 };
rgrover1 710:b2e1a2660ec2 885
rgrover1 710:b2e1a2660ec2 886 #endif // ifndef __GAP_H__