Rtos API example
UDPSocket Class Reference
[Netsocket]
UDP socket. More...
#include <UDPSocket.h>
Inherits Socket.
Public Member Functions | |
UDPSocket () | |
Create an uninitialized socket. | |
template<typename S > | |
UDPSocket (S *stack) | |
Create a socket on a network interface. | |
virtual | ~UDPSocket () |
Destroy a socket. | |
nsapi_size_or_error_t | sendto (const char *host, uint16_t port, const void *data, nsapi_size_t size) |
Send a packet over a UDP socket. | |
nsapi_size_or_error_t | sendto (const SocketAddress &address, const void *data, nsapi_size_t size) |
Send a packet over a UDP socket. | |
nsapi_size_or_error_t | recvfrom (SocketAddress *address, void *data, nsapi_size_t size) |
Receive a packet over a UDP socket. | |
nsapi_error_t | open (NetworkStack *stack) |
Opens a socket. | |
nsapi_error_t | close () |
Close the socket. | |
int | join_multicast_group (const SocketAddress &address) |
Subscribes to an IP multicast group. | |
int | leave_multicast_group (const SocketAddress &address) |
Leave an IP multicast group. | |
nsapi_error_t | bind (uint16_t port) |
Bind a specific address to a socket. | |
nsapi_error_t | bind (const char *address, uint16_t port) |
Bind a specific address to a socket. | |
nsapi_error_t | bind (const SocketAddress &address) |
Bind a specific address to a socket. | |
void | set_blocking (bool blocking) |
Set blocking or non-blocking mode of the socket. | |
void | set_timeout (int timeout) |
Set timeout on blocking socket operations. | |
void | sigio (mbed::Callback< void()> func) |
Register a callback on state change of the socket. | |
template<typename T , typename M > | |
MBED_DEPRECATED_SINCE("mbed-os-5.4","The behaviour of Socket::attach differs from other attach functions in ""mbed OS and has been known to cause confusion. Replaced by Socket::sigio.") void attach(mbed | MBED_DEPRECATED_SINCE ("mbed-os-5.1","The attach function does not support cv-qualifiers. Replaced by ""attach(callback(obj, method)).") void attach(T *obj |
Register a callback on state change of the socket. |
Detailed Description
UDP socket.
Definition at line 31 of file UDPSocket.h.
Constructor & Destructor Documentation
UDPSocket | ( | ) |
Create an uninitialized socket.
Must call open to initialize the socket on a network stack.
Definition at line 25 of file UDPSocket.cpp.
UDPSocket | ( | S * | stack ) |
Create a socket on a network interface.
Creates and opens a socket on the network stack of the given network interface.
- Parameters:
-
stack Network stack as target for socket
Definition at line 47 of file UDPSocket.h.
~UDPSocket | ( | ) | [virtual] |
Destroy a socket.
Closes socket if the socket is still open
Definition at line 30 of file UDPSocket.cpp.
Member Function Documentation
nsapi_error_t bind | ( | uint16_t | port ) | [inherited] |
Bind a specific address to a socket.
Binding a socket specifies the address and port on which to recieve data.
- Parameters:
-
port Local port to bind
- Returns:
- 0 on success, negative error code on failure.
Definition at line 95 of file Socket.cpp.
nsapi_error_t bind | ( | const char * | address, |
uint16_t | port | ||
) | [inherited] |
Bind a specific address to a socket.
Binding a socket specifies the address and port on which to recieve data. If the IP address is zeroed, only the port is bound.
- Parameters:
-
address Null-terminated local address to bind port Local port to bind
- Returns:
- 0 on success, negative error code on failure.
Definition at line 102 of file Socket.cpp.
nsapi_error_t bind | ( | const SocketAddress & | address ) | [inherited] |
Bind a specific address to a socket.
Binding a socket specifies the address and port on which to recieve data. If the IP address is zeroed, only the port is bound.
- Parameters:
-
address Local address to bind
- Returns:
- 0 on success, negative error code on failure.
Definition at line 109 of file Socket.cpp.
nsapi_error_t close | ( | void | ) | [inherited] |
Close the socket.
Closes any open connection and deallocates any memory associated with the socket. Called from destructor if socket is not closed.
- Returns:
- 0 on success, negative error code on failure
Definition at line 52 of file Socket.cpp.
int join_multicast_group | ( | const SocketAddress & | address ) | [inherited] |
Subscribes to an IP multicast group.
- Parameters:
-
address Multicast group IP address
- Returns:
- Negative error code on failure
Reimplemented in TCPSocket.
Definition at line 84 of file Socket.cpp.
int leave_multicast_group | ( | const SocketAddress & | address ) | [inherited] |
Leave an IP multicast group.
- Parameters:
-
address Multicast group IP address
- Returns:
- Negative error code on failure
Definition at line 89 of file Socket.cpp.
MBED_DEPRECATED_SINCE ("mbed-os-5.4", "The behaviour of Socket::attach differs from other attach functions in " "mbed OS and has been known to cause confusion. Replaced by Socket::sigio.") void attach(mbed MBED_DEPRECATED_SINCE | ( | "mbed-os-5.1" | , |
"The attach function does not support cv-qualifiers. Replaced by ""attach(callback(obj, method))." | |||
) | [inherited] |
Register a callback on state change of the socket.
- See also:
- Socket::sigio
Register a callback on state change of the socket
- See also:
- Socket::sigio
nsapi_error_t open | ( | NetworkStack * | stack ) | [inherited] |
Opens a socket.
Creates a network socket on the network stack of the given network interface. Not needed if stack is passed to the socket's constructor.
- Parameters:
-
stack Network stack as target for socket
- Returns:
- 0 on success, negative error code on failure
Definition at line 27 of file Socket.cpp.
nsapi_size_or_error_t recvfrom | ( | SocketAddress * | address, |
void * | data, | ||
nsapi_size_t | size | ||
) |
Receive a packet over a UDP socket.
Receives data and stores the source address in address if address is not NULL. Returns the number of bytes received into the buffer.
By default, recvfrom blocks until data is sent. If socket is set to non-blocking or times out, NSAPI_ERROR_WOULD_BLOCK is returned immediately.
- Parameters:
-
address Destination for the source address or NULL data Destination buffer for data received from the host size Size of the buffer in bytes
- Returns:
- Number of received bytes on success, negative error code on failure
Definition at line 92 of file UDPSocket.cpp.
nsapi_size_or_error_t sendto | ( | const SocketAddress & | address, |
const void * | data, | ||
nsapi_size_t | size | ||
) |
Send a packet over a UDP socket.
Sends data to the specified address. Returns the number of bytes sent from the buffer.
By default, sendto blocks until data is sent. If socket is set to non-blocking or times out, NSAPI_ERROR_WOULD_BLOCK is returned immediately.
- Parameters:
-
address The SocketAddress of the remote host data Buffer of data to send to the host size Size of the buffer in bytes
- Returns:
- Number of sent bytes on success, negative error code on failure
Definition at line 55 of file UDPSocket.cpp.
nsapi_size_or_error_t sendto | ( | const char * | host, |
uint16_t | port, | ||
const void * | data, | ||
nsapi_size_t | size | ||
) |
Send a packet over a UDP socket.
Sends data to the specified address specified by either a domain name or an IP address and port. Returns the number of bytes sent from the buffer.
By default, sendto blocks until data is sent. If socket is set to non-blocking or times out, NSAPI_ERROR_WOULD_BLOCK is returned immediately.
- Parameters:
-
host Hostname of the remote host port Port of the remote host data Buffer of data to send to the host size Size of the buffer in bytes
- Returns:
- Number of sent bytes on success, negative error code on failure
Definition at line 41 of file UDPSocket.cpp.
void set_blocking | ( | bool | blocking ) | [inherited] |
Set blocking or non-blocking mode of the socket.
Initially all sockets are in blocking mode. In non-blocking mode blocking operations such as send/recv/accept return NSAPI_ERROR_WOULD_BLOCK if they can not continue.
set_blocking(false) is equivalent to set_timeout(-1) set_blocking(true) is equivalent to set_timeout(0)
- Parameters:
-
blocking true for blocking mode, false for non-blocking mode.
Definition at line 124 of file Socket.cpp.
void set_timeout | ( | int | timeout ) | [inherited] |
Set timeout on blocking socket operations.
Initially all sockets have unbounded timeouts. NSAPI_ERROR_WOULD_BLOCK is returned if a blocking operation takes longer than the specified timeout. A timeout of 0 removes the timeout from the socket. A negative value give the socket an unbounded timeout.
set_timeout(0) is equivalent to set_blocking(false) set_timeout(-1) is equivalent to set_blocking(true)
- Parameters:
-
timeout Timeout in milliseconds
Definition at line 130 of file Socket.cpp.
void sigio | ( | mbed::Callback< void()> | func ) | [inherited] |
Register a callback on state change of the socket.
The specified callback will be called on state changes such as when the socket can recv/send/accept successfully and on when an error occurs. The callback may also be called spuriously without reason.
The callback may be called in an interrupt context and should not perform expensive operations such as recv/send calls.
Note! This is not intended as a replacement for a poll or attach-like asynchronous api, but rather as a building block for constructing such functionality. The exact timing of when the registered function is called is not guaranteed and susceptible to change.
- Parameters:
-
func Function to call on state change
Generated on Sun Jul 17 2022 08:25:42 by 1.7.2