T z
/
Test
Nucleo_Example_Demo.
main.cpp@5:39b5a7958d17, 2017-09-26 (annotated)
- Committer:
- makeworks
- Date:
- Tue Sep 26 01:21:55 2017 +0000
- Revision:
- 5:39b5a7958d17
- Parent:
- 4:b5ca7f122564
??README.md
Who changed what in which revision?
User | Revision | Line number | New contents of line |
---|---|---|---|
bcostm | 0:d5bd863b2036 | 1 | #include "mbed.h" |
bcostm | 0:d5bd863b2036 | 2 | |
makeworks | 4:b5ca7f122564 | 3 | //------------------------------------ |
makeworks | 4:b5ca7f122564 | 4 | // Hyperterminal configuration |
makeworks | 4:b5ca7f122564 | 5 | // 115200 bauds, 8-bit data, no parity |
makeworks | 4:b5ca7f122564 | 6 | //------------------------------------ |
bcostm | 0:d5bd863b2036 | 7 | |
makeworks | 4:b5ca7f122564 | 8 | Serial pc(SERIAL_TX, SERIAL_RX, 115200); |
makeworks | 4:b5ca7f122564 | 9 | DigitalOut led_red((PinName)LED_RED, (int)0);//高电平点亮,低电平熄灭 |
makeworks | 4:b5ca7f122564 | 10 | DigitalIn user_button((PinName)USER_BUTTON, (PinMode)PullUp); |
makeworks | 4:b5ca7f122564 | 11 | AnalogIn analog_value(A0); |
makeworks | 4:b5ca7f122564 | 12 | PwmOut mypwm(PWM_OUT); |
makeworks | 4:b5ca7f122564 | 13 | |
makeworks | 4:b5ca7f122564 | 14 | Ticker read_analog_ticker; |
makeworks | 4:b5ca7f122564 | 15 | |
makeworks | 4:b5ca7f122564 | 16 | void read_analog_value() |
bcostm | 0:d5bd863b2036 | 17 | { |
makeworks | 4:b5ca7f122564 | 18 | float meas = analog_value.read(); // Converts and read the analog input value (value from 0.0 to 1.0) |
makeworks | 4:b5ca7f122564 | 19 | meas = meas * 3300; // Change the value to be in the 0 to 3300 range |
makeworks | 4:b5ca7f122564 | 20 | pc.printf("measure = %.0f mV\r\n", meas); |
makeworks | 4:b5ca7f122564 | 21 | } |
makeworks | 4:b5ca7f122564 | 22 | |
makeworks | 4:b5ca7f122564 | 23 | int main(void) |
makeworks | 4:b5ca7f122564 | 24 | { |
makeworks | 4:b5ca7f122564 | 25 | pc.printf("\nAnalogIn example\r\n"); |
makeworks | 4:b5ca7f122564 | 26 | |
makeworks | 4:b5ca7f122564 | 27 | mypwm.period_ms(10); |
makeworks | 4:b5ca7f122564 | 28 | mypwm.pulsewidth_ms(1); |
makeworks | 4:b5ca7f122564 | 29 | printf("pwm set to %.2f %%\n", mypwm.read() * 100); |
makeworks | 4:b5ca7f122564 | 30 | |
makeworks | 4:b5ca7f122564 | 31 | // Init the ticker with the address of the function (toggle_led) to be attached and the interval (100 ms) |
makeworks | 4:b5ca7f122564 | 32 | read_analog_ticker.attach(&read_analog_value, 1); |
makeworks | 3:a7b520fad123 | 33 | |
makeworks | 3:a7b520fad123 | 34 | while (1) { |
makeworks | 4:b5ca7f122564 | 35 | if (0 == user_button) { |
makeworks | 4:b5ca7f122564 | 36 | led_red.write(1); |
makeworks | 4:b5ca7f122564 | 37 | } else |
makeworks | 4:b5ca7f122564 | 38 | led_red.write(0); |
makeworks | 4:b5ca7f122564 | 39 | wait(0.1); // 100 ms |
bcostm | 0:d5bd863b2036 | 40 | } |
bcostm | 0:d5bd863b2036 | 41 | } |