Mac Lobdell
Simple Mbed Cloud Client application using features of K64 & K66
Connect to Mbed Cloud!
This example was customized a bit for FRDM-K66 and FRDM-K64F.
It depends on having an SD Card plugged in for storage of credentials. It could be changed later to use a SPI flash or other storage on a shield or wired in.
The app keeps track of how many times switch 2 (SW2) is pressed. The value can be retrieved via a GET request to Mbed Cloud.
Also, it will blink a pattern based on milisecond (ms) timing values that can be sent from Mbed Cloud. The pattern can be sent with a PUT request and the blinking sequence can be triggered by a POST request.
Diff: mbed_cloud_client_user_config.h
- Revision:
- 9:ae1f6fe932dc
- Parent:
- 7:179a952c4a39
diff -r ace9e5de6491 -r ae1f6fe932dc mbed_cloud_client_user_config.h --- a/mbed_cloud_client_user_config.h Mon Feb 19 20:37:36 2018 +0000 +++ b/mbed_cloud_client_user_config.h Thu May 10 06:28:06 2018 -0500 @@ -1,56 +1,59 @@ -// ---------------------------------------------------------------------------- -// Copyright 2016-2017 ARM Ltd. -// -// SPDX-License-Identifier: Apache-2.0 -// -// Licensed under the Apache License, Version 2.0 (the "License"); -// you may not use this file except in compliance with the License. -// You may obtain a copy of the License at -// -// http://www.apache.org/licenses/LICENSE-2.0 -// -// Unless required by applicable law or agreed to in writing, software -// distributed under the License is distributed on an "AS IS" BASIS, -// WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. -// See the License for the specific language governing permissions and -// limitations under the License. -// ---------------------------------------------------------------------------- - -// This file is a template and it's intented to be copied to the application -// Enable this configuration - -#ifndef MBED_CLOUD_CLIENT_USER_CONFIG_H -#define MBED_CLOUD_CLIENT_USER_CONFIG_H - - -#define MBED_CLOUD_CLIENT_ENDPOINT_TYPE "default" - -// Enable either TCP or UDP, but no both -#define MBED_CLOUD_CLIENT_TRANSPORT_MODE_TCP -// MBED_CLOUD_CLIENT_TRANSPORT_MODE_UDP - -#define MBED_CLOUD_CLIENT_LIFETIME 3600 - -#define MBED_CLOUD_CLIENT_SUPPORT_UPDATE -#define SN_COAP_MAX_BLOCKWISE_PAYLOAD_SIZE 1024 - -// set flag to enable update support in mbed Cloud client -#define MBED_CLOUD_CLIENT_SUPPORT_UPDATE - -// set download buffer size in bytes (min. 1024 bytes) - -// Use larger buffers in Linux // -#ifdef __linux__ -#define MBED_CLOUD_CLIENT_UPDATE_BUFFER (2 * 1024 * 1024) -#else -#define MBED_CLOUD_CLIENT_UPDATE_BUFFER 2048 -#endif - -// Developer flags for Update feature -#if MBED_CONF_APP_DEVELOPER_MODE == 1 - #define MBED_CLOUD_DEV_UPDATE_CERT - #define MBED_CLOUD_DEV_UPDATE_ID -#endif // MBED_CONF_APP_DEVELOPER_MODE - -#endif // MBED_CLOUD_CLIENT_USER_CONFIG_H - +// ---------------------------------------------------------------------------- +// Copyright 2016-2017 ARM Ltd. +// +// SPDX-License-Identifier: Apache-2.0 +// +// Licensed under the Apache License, Version 2.0 (the "License"); +// you may not use this file except in compliance with the License. +// You may obtain a copy of the License at +// +// http://www.apache.org/licenses/LICENSE-2.0 +// +// Unless required by applicable law or agreed to in writing, software +// distributed under the License is distributed on an "AS IS" BASIS, +// WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +// See the License for the specific language governing permissions and +// limitations under the License. +// ---------------------------------------------------------------------------- + +// This file is a template and it's intented to be copied to the application +// Enable this configuration + +#ifndef MBED_CLOUD_CLIENT_USER_CONFIG_H +#define MBED_CLOUD_CLIENT_USER_CONFIG_H + +#ifdef MBED_CONF_APP_ENDPOINT_TYPE +#define MBED_CLOUD_CLIENT_ENDPOINT_TYPE MBED_CONF_APP_ENDPOINT_TYPE +#else +#define MBED_CLOUD_CLIENT_ENDPOINT_TYPE "default" +#endif + +// Enable either TCP or UDP, but no both +#define MBED_CLOUD_CLIENT_TRANSPORT_MODE_TCP +// MBED_CLOUD_CLIENT_TRANSPORT_MODE_UDP + +#define MBED_CLOUD_CLIENT_LIFETIME 3600 + +#define MBED_CLOUD_CLIENT_SUPPORT_UPDATE +#define SN_COAP_MAX_BLOCKWISE_PAYLOAD_SIZE 1024 + +// set flag to enable update support in mbed Cloud client +#define MBED_CLOUD_CLIENT_SUPPORT_UPDATE + +// set download buffer size in bytes (min. 1024 bytes) + +// Use larger buffers in Linux // +#ifdef __linux__ +#define MBED_CLOUD_CLIENT_UPDATE_BUFFER (2 * 1024 * 1024) +#else +#define MBED_CLOUD_CLIENT_UPDATE_BUFFER 2048 +#endif + +// Developer flags for Update feature +#if MBED_CONF_APP_DEVELOPER_MODE == 1 + #define MBED_CLOUD_DEV_UPDATE_CERT + #define MBED_CLOUD_DEV_UPDATE_ID +#endif // MBED_CONF_APP_DEVELOPER_MODE + +#endif // MBED_CLOUD_CLIENT_USER_CONFIG_H +