Mac Lobdell
Simple Mbed Cloud Client application using features of K64 & K66
Connect to Mbed Cloud!
This example was customized a bit for FRDM-K66 and FRDM-K64F.
It depends on having an SD Card plugged in for storage of credentials. It could be changed later to use a SPI flash or other storage on a shield or wired in.
The app keeps track of how many times switch 2 (SW2) is pressed. The value can be retrieved via a GET request to Mbed Cloud.
Also, it will blink a pattern based on milisecond (ms) timing values that can be sent from Mbed Cloud. The pattern can be sent with a PUT request and the blinking sequence can be triggered by a POST request.
Diff: mbed_app.json
- Revision:
- 9:ae1f6fe932dc
- Parent:
- 3:bd00f3af8f03
- Child:
- 12:0a894bf1f5f2
diff -r ace9e5de6491 -r ae1f6fe932dc mbed_app.json
--- a/mbed_app.json Mon Feb 19 20:37:36 2018 +0000
+++ b/mbed_app.json Thu May 10 06:28:06 2018 -0500
@@ -1,22 +1,53 @@
-{
- "macros": [
- "MBEDTLS_USER_CONFIG_FILE=\"mbedTLSConfig_mbedOS.h\"",
- "MBED_CLIENT_USER_CONFIG_FILE=\"mbed_cloud_client_user_config.h\"",
- "MBED_CLOUD_CLIENT_USER_CONFIG_FILE=\"mbed_cloud_client_user_config.h\"",
- "PAL_DTLS_PEER_MIN_TIMEOUT=5000",
- "MBED_CONF_APP_MAIN_STACK_SIZE=4608"
- ],
- "target_overrides": {
- "*": {
- "platform.stdio-baud-rate": 115200,
- "platform.stdio-convert-newlines": true,
- "mbed-trace.enable": null
- }
- },
- "config": {
- "developer-mode": {
- "help": "Enable Developer mode to skip Factory enrollment",
- "value": 1
- }
- }
-}
+{
+ "macros": [
+ "MBEDTLS_USER_CONFIG_FILE=\"mbedTLSConfig_mbedOS.h\"",
+ "PAL_USER_DEFINED_CONFIGURATION=\"sotp_fs_config_MbedOS.h\"",
+ "MBED_CLIENT_USER_CONFIG_FILE=\"mbed_cloud_client_user_config.h\"",
+ "MBED_CLOUD_CLIENT_USER_CONFIG_FILE=\"mbed_cloud_client_user_config.h\"",
+ "PAL_DTLS_PEER_MIN_TIMEOUT=5000",
+ "MBED_CONF_APP_MAIN_STACK_SIZE=4608",
+ "ARM_UC_USE_PAL_BLOCKDEVICE=1",
+ "MBED_CLOUD_CLIENT_UPDATE_STORAGE=ARM_UCP_FLASHIAP_BLOCKDEVICE"
+ ],
+ "target_overrides": {
+ "*": {
+ "platform.stdio-baud-rate": 115200,
+ "platform.stdio-convert-newlines": true,
+ "update-client.storage-address" : "(1024*1024*64)",
+ "update-client.storage-size" : "(1024*1024*2)",
+ "update-client.storage-locations": "1",
+ "mbed-trace.enable": null
+ }
+ },
+ "config": {
+ "format-storage-layer-on-error": {
+ "help": "Whether to format the storage layer when it cannot be read - always disable for production devices!",
+ "value": 1
+ },
+ "developer-mode": {
+ "help": "Enable Developer mode to skip Factory enrollment",
+ "value": 1
+ },
+
+ "sotp-section-1-address": {
+ "help": "Flash sector address for SOTP sector 1",
+ "macro_name": "PAL_INTERNAL_FLASH_SECTION_1_ADDRESS",
+ "value": null
+ },
+ "sotp-section-1-size": {
+ "help": "Flash sector size for SOTP sector 1",
+ "macro_name": "PAL_INTERNAL_FLASH_SECTION_1_SIZE",
+ "value": null
+ },
+ "sotp-section-2-address": {
+ "help": "Flash sector address for SOTP sector 2",
+ "macro_name": "PAL_INTERNAL_FLASH_SECTION_2_ADDRESS",
+ "value": null
+ },
+ "sotp-section-2-size": {
+ "help": "Flash sector size for SOTP sector 2",
+ "macro_name": "PAL_INTERNAL_FLASH_SECTION_2_SIZE",
+ "value": null
+ }
+ }
+}