Mac Lobdell
Simple Mbed Cloud Client application using features of K64 & K66
Connect to Mbed Cloud!
This example was customized a bit for FRDM-K66 and FRDM-K64F.
It depends on having an SD Card plugged in for storage of credentials. It could be changed later to use a SPI flash or other storage on a shield or wired in.
The app keeps track of how many times switch 2 (SW2) is pressed. The value can be retrieved via a GET request to Mbed Cloud.
Also, it will blink a pattern based on milisecond (ms) timing values that can be sent from Mbed Cloud. The pattern can be sent with a PUT request and the blinking sequence can be triggered by a POST request.
Diff: update_default_resources.c
- Revision:
- 10:3f30c0e55a8e
diff -r ae1f6fe932dc -r 3f30c0e55a8e update_default_resources.c
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/update_default_resources.c Thu May 10 06:28:36 2018 -0500
@@ -0,0 +1,41 @@
+// ----------------------------------------------------------------------------
+// Copyright 2016-2018 ARM Ltd.
+//
+// SPDX-License-Identifier: Apache-2.0
+//
+// Licensed under the Apache License, Version 2.0 (the "License");
+// you may not use this file except in compliance with the License.
+// You may obtain a copy of the License at
+//
+// http://www.apache.org/licenses/LICENSE-2.0
+//
+// Unless required by applicable law or agreed to in writing, software
+// distributed under the License is distributed on an "AS IS" BASIS,
+// WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+// See the License for the specific language governing permissions and
+// limitations under the License.
+// ----------------------------------------------------------------------------
+
+#ifdef MBED_CLOUD_CLIENT_USER_CONFIG_FILE
+#include MBED_CLOUD_CLIENT_USER_CONFIG_FILE
+#endif
+
+#include <stdint.h>
+
+#ifdef MBED_CLOUD_DEV_UPDATE_ID
+const uint8_t arm_uc_vendor_id[16] = { "dev_manufacturer" };
+const uint16_t arm_uc_vendor_id_size = sizeof(arm_uc_vendor_id);
+
+const uint8_t arm_uc_class_id[16] = { "dev_model_number" };
+const uint16_t arm_uc_class_id_size = sizeof(arm_uc_class_id);
+#endif
+
+#ifdef MBED_CLOUD_DEV_UPDATE_CERT
+const uint8_t arm_uc_default_fingerprint[32] = { 0 };
+const uint16_t arm_uc_default_fingerprint_size =
+ sizeof(arm_uc_default_fingerprint);
+
+const uint8_t arm_uc_default_certificate[1] = { 0 };
+const uint16_t arm_uc_default_certificate_size =
+ sizeof(arm_uc_default_certificate);
+#endif