Diff: setup.cpp

Revision:

1:1ccf36276cd3

Parent:

0:e13a8a944e25

Child:

2:6ed27f413b30

--- a/setup.cpp	Tue Feb 13 10:07:23 2018 +0000
+++ /dev/null	Thu Jan 01 00:00:00 1970 +0000
@@ -1,352 +0,0 @@
-// ----------------------------------------------------------------------------
-// Copyright 2016-2017 ARM Ltd.
-//
-// SPDX-License-Identifier: Apache-2.0
-//
-// Licensed under the Apache License, Version 2.0 (the "License");
-// you may not use this file except in compliance with the License.
-// You may obtain a copy of the License at
-//
-//     http://www.apache.org/licenses/LICENSE-2.0
-//
-// Unless required by applicable law or agreed to in writing, software
-// distributed under the License is distributed on an "AS IS" BASIS,
-// WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-// See the License for the specific language governing permissions and
-// limitations under the License.
-// ----------------------------------------------------------------------------
-
-
-///////////
-// INCLUDES
-///////////
-
-// Note: this macro is needed on armcc to get the the PRI*32 macros
-// from inttypes.h in a C++ code.
-#ifndef __STDC_FORMAT_MACROS
-#define __STDC_FORMAT_MACROS
-#endif
-
-#include "mbed.h"
-#include "setup.h"
-#include "memory_tests.h"
-#include "EthernetInterface.h" // Networking interface include
-#include "simple-mbed-cloud-client.h"
-#include "pal.h"
-#include "mbed-trace/mbed_trace.h"
-#include "mbed-trace-helper.h"
-#include "factory_configurator_client.h"
-
-#include "SDBlockDevice.h"
-#include "FATFileSystem.h"
-
-// Network interface
-#include "EthernetInterface.h"
-EthernetInterface eth;
-
-////////////////////////////////////////
-// PLATFORM SPECIFIC DEFINES & FUNCTIONS
-////////////////////////////////////////
-#define DEFAULT_FIRMWARE_PATH       "/sd/firmware"
-
-#include "mbed_trace.h"
-#define TRACE_GROUP "exam"
-
-
-// Define led on/off
-#ifdef TARGET_STM
-#define LED_ON (true)
-#else // #ifdef TARGET_STM
-#define LED_ON (false)
-#endif // #ifdef TARGET_STM
-
-#define LED_OFF (!LED_ON)
-
-DigitalOut  led(MBED_CONF_APP_LED_PINNAME, LED_OFF);
-InterruptIn button(MBED_CONF_APP_BUTTON_PINNAME);
-
-static bool button_pressed = false;
-static void button_press(void);
-
-// Block device and Filesystem
-SDBlockDevice sd(PTE3, PTE1, PTE2, PTE4);
-FATFileSystem fs("sd", &sd);
-
-
-Thread resource_thread;
-
-NetworkInterface* network_interface = NULL;
-
-
-void button_press(void)
-{
-    button_pressed = true;
-}
-
-/////////////////////////
-// SETUP.H IMPLEMENTATION
-/////////////////////////
-int initPlatform()
-{
-    /* Explicit declaration to catch Block Device initialization errors. */
-    int sd_ret = sd.init();
-
-    if(sd_ret != BD_ERROR_OK) {
-        tr_error("initPlatform() - sd.init() failed with %d\n", sd_ret);
-        printf("SD card initialization failed. Verify that SD-card is attached.\n");
-        return -1;
-    }
-    tr_debug("initPlatform() - BlockDevice init OK.\n");
-
-    if(MBED_CONF_APP_BUTTON_PINNAME != NC) {
-        button.fall(&button_press);
-    }
-
-    return 0;
-}
-
-bool rmFirmwareImages()
-{
-    palStatus_t status = PAL_SUCCESS;
-    status = pal_fsRmFiles(DEFAULT_FIRMWARE_PATH);
-    if(status == PAL_SUCCESS) {
-        printf("Firmware storage erased.\n");
-    } else if (status == PAL_ERR_FS_NO_PATH) {
-        printf("Firmware path not found/does not exist.\n");
-    } else {
-        printf("Firmware storage erasing failed with %" PRId32, status);
-        return false;
-    }
-    return true;
-}
-
-int reformat_storage()
-{
-    int reformat_result = -1;
-    printf("Autoformatting the storage.\n");
-    if (1/*sd*/) {
-        // TODO
-        // reformat_result = fs.reformat(sd);
-        if (reformat_result != 0) {
-            printf("Autoformatting failed with error %d\n", reformat_result);
-        }
-    }
-    return reformat_result;
-}
-
-int run_application(int(*function)(void))
-{
-    // application_init() runs the following initializations:
-    //  1. trace initialization
-    //  2. platform initialization
-    //  3. print memory statistics if MBED_HEAP_STATS_ENABLED is defined
-    //  4. FCC initialization.
-    if (!application_init()) {
-        printf("Initialization failed, exiting application!\n");
-        return 1;
-    }
-    return function();
-}
-
-// Helper function, could be moved someone sd
-void print_MAC(NetworkInterface* network_interface, bool log_messages) {
-#if MBED_CONF_APP_NETWORK_INTERFACE != CELLULAR_ONBOARD
-    const char *mac_addr = network_interface->get_mac_address();
-    if (mac_addr == NULL) {
-        if (log_messages) {
-            printf("ERROR - No MAC address\n");
-        }
-        return;
-    }
-    if (log_messages) {
-        printf("MAC address %s\n", mac_addr);
-    }
-#endif
-}
-
-bool init_connection()
-{
-    int connect_success = -1;
-    bool log_messages = 1;
-
-    srand(time(NULL));
-
-    printf("Using Ethernet\n");
-
-    network_interface = ð
-    connect_success = eth.connect();
-
-    if(connect_success == 0) {
-        if (log_messages) {
-            printf("Connected to Network successfully\n");
-            print_MAC(network_interface, log_messages);
-        }
-    } else {
-        if (log_messages) {
-            print_MAC(network_interface, log_messages);
-            printf("Connection to Network Failed %d!\n", connect_success);
-        }
-        return NULL;
-    }
-    const char *ip_addr  = network_interface->get_ip_address();
-    if (ip_addr == NULL) {
-        if (log_messages) {
-            printf("ERROR - No IP address\n");
-        }
-        return NULL;
-    }
-
-    if (log_messages) {
-        printf("IP address %s\n", ip_addr);
-    }
-
-    if(network_interface == NULL) {
-        return false;
-    }
-    return true;
-}
-
-void* get_network_interface()
-{
-    return network_interface;
-}
-
-
-void toggle_led(void)
-{
-    if (MBED_CONF_APP_LED_PINNAME != NC) {
-        led = !led;
-    }
-    else {
-        printf("Virtual LED toggled\n");
-    }
-}
-
-void led_off(void)
-{
-    if (MBED_CONF_APP_LED_PINNAME != NC) {
-        led = LED_OFF;
-    }
-    else {
-        printf("Virtual LED off\n");
-    }
-}
-
-uint8_t button_clicked(void)
-{
-    if (button_pressed) {
-        button_pressed = false;
-        return true;
-    }
-    return false;
-}
-
-void do_wait(int timeout_ms)
-{
-    wait_ms(timeout_ms);
-}
-
-
-static bool application_init_mbed_trace(void)
-{
-    // Create mutex for tracing to avoid broken lines in logs
-    if(!mbed_trace_helper_create_mutex()) {
-        printf("ERROR - Mutex creation for mbed_trace failed!\n");
-        return 1;
-    }
-
-    // Initialize mbed trace
-    mbed_trace_init();
-    mbed_trace_mutex_wait_function_set(mbed_trace_helper_mutex_wait);
-    mbed_trace_mutex_release_function_set(mbed_trace_helper_mutex_release);
-
-    return 0;
-}
-
-static void reset_storage(void)
-{
-    printf("Resets storage to an empty state.\n");
-    fcc_status_e delete_status = fcc_storage_delete();
-    if (delete_status != FCC_STATUS_SUCCESS) {
-        printf("Failed to delete storage - %d\n", delete_status);
-    }
-}
-
-static bool application_init_fcc(void)
-{
-    fcc_status_e status = fcc_init();
-    if(status != FCC_STATUS_SUCCESS) {
-        printf("fcc_init failed with status %d! - exit\n", status);
-        return 1;
-    }
-
-    // This is designed to simplify user-experience by auto-formatting the
-    // primary storage if no valid certificates exist.
-    // This should never be used for any kind of production devices.
-#ifndef MBED_CONF_APP_MCC_NO_AUTO_FORMAT
-    status = fcc_verify_device_configured_4mbed_cloud();
-    if (status != FCC_STATUS_SUCCESS) {
-        if (reformat_storage() != 0) {
-            return 1;
-        }
-    reset_storage();
-    }
-#endif
-
-    // Resets storage to an empty state.
-    // Use this function when you want to clear storage from all the factory-tool generated data and user data.
-    // After this operation device must be injected again by using factory tool or developer certificate.
-#ifdef RESET_STORAGE
-    reset_storage();
-#endif
-
-    // Deletes existing firmware images from storage.
-    // This deletes any existing firmware images during application startup.
-    // This compilation flag is currently implemented only for mbed OS.
-#ifdef RESET_FIRMWARE
-    bool status_erase = rmFirmwareImages();
-    if(status_erase == false) {
-        return 1;
-    }
-#endif
-
-#if MBED_CONF_APP_DEVELOPER_MODE == 1
-    printf("Start developer flow\n");
-    status = fcc_developer_flow();
-    if (status == FCC_STATUS_KCM_FILE_EXIST_ERROR) {
-        printf("Developer credentials already exists\n");
-    } else if (status != FCC_STATUS_SUCCESS) {
-        printf("Failed to load developer credentials - exit\n");
-        return 1;
-    }
-#endif
-    status = fcc_verify_device_configured_4mbed_cloud();
-    if (status != FCC_STATUS_SUCCESS) {
-        printf("Device not configured for mbed Cloud - exit\n");
-        return 1;
-    }
-
-    return 0;
-}
-
-bool application_init(void)
-{
-    if (application_init_mbed_trace() != 0) {
-        printf("Failed initializing mbed trace\n" );
-        return false;
-    }
-
-    if(initPlatform() != 0) {
-       printf("ERROR - initPlatform() failed!\n");
-       return false;
-    }
-
-    printf("Start Simple Mbed Cloud Client\n");
-
-    if (application_init_fcc() != 0) {
-        printf("Failed initializing FCC\n" );
-        return false;
-    }
-
-    return true;
-}