1276

Dependents:   SX1276PingPong_RHF76-052_s

Fork of SX1276Lib by Semtech

Embed: (wiki syntax)

« Back to documentation index

Show/hide line numbers sx1276-hal.h Source File

sx1276-hal.h

00001 /*
00002  / _____)             _              | |
00003 ( (____  _____ ____ _| |_ _____  ____| |__
00004  \____ \| ___ |    (_   _) ___ |/ ___)  _ \
00005  _____) ) ____| | | || |_| ____( (___| | | |
00006 (______/|_____)_|_|_| \__)_____)\____)_| |_|
00007     (C) 2014 Semtech
00008 
00009 Description: -
00010 
00011 License: Revised BSD License, see LICENSE.TXT file include in the project
00012 
00013 Maintainers: Miguel Luis, Gregory Cristian and Nicolas Huguenin
00014 */
00015 #ifndef __SX1276_HAL_H__
00016 #define __SX1276_HAL_H__
00017 #include "sx1276.h"
00018 
00019 /*!
00020  * \brief Radio hardware registers initialization definition
00021  *
00022  * \remark Can be automatically generated by the SX1276 GUI (not yet implemented)
00023  */
00024 #define RADIO_INIT_REGISTERS_VALUE                \
00025 {                                                 \
00026     { MODEM_FSK , REG_LNA                , 0x23 },\
00027     { MODEM_FSK , REG_RXCONFIG           , 0x1E },\
00028     { MODEM_FSK , REG_RSSICONFIG         , 0xD2 },\
00029     { MODEM_FSK , REG_AFCFEI             , 0x01 },\
00030     { MODEM_FSK , REG_PREAMBLEDETECT     , 0xAA },\
00031     { MODEM_FSK , REG_OSC                , 0x07 },\
00032     { MODEM_FSK , REG_SYNCCONFIG         , 0x12 },\
00033     { MODEM_FSK , REG_SYNCVALUE1         , 0xC1 },\
00034     { MODEM_FSK , REG_SYNCVALUE2         , 0x94 },\
00035     { MODEM_FSK , REG_SYNCVALUE3         , 0xC1 },\
00036     { MODEM_FSK , REG_PACKETCONFIG1      , 0xD8 },\
00037     { MODEM_FSK , REG_FIFOTHRESH         , 0x8F },\
00038     { MODEM_FSK , REG_IMAGECAL           , 0x02 },\
00039     { MODEM_FSK , REG_DIOMAPPING1        , 0x00 },\
00040     { MODEM_FSK , REG_DIOMAPPING2        , 0x30 },\
00041     { MODEM_LORA, REG_LR_PAYLOADMAXLENGTH, 0x40 },\
00042 }                                                 \
00043 
00044 /*! 
00045  * Actual implementation of a SX1276 radio, includes some modifications to make it compatible with the MB1 LAS board
00046  */
00047 class SX1276MB1xAS  : public SX1276 
00048 {
00049 protected:
00050     /*!
00051      * Antenna switch GPIO pins objects
00052      */
00053     DigitalInOut antSwitch ;
00054 
00055     DigitalIn fake;
00056 
00057 private:
00058     static const RadioRegisters_t  RadioRegsInit[];
00059 
00060 public:
00061     SX1276MB1xAS ( RadioEvents_t *events,
00062             PinName mosi, PinName miso, PinName sclk, PinName nss, PinName reset ,
00063             PinName dio0 , PinName dio1, PinName dio2, PinName dio3, PinName dio4, PinName dio5,
00064             PinName antSwitch  ); 
00065 
00066     SX1276MB1xAS ( RadioEvents_t *events );
00067 
00068     virtual ~SX1276MB1xAS ( ) { };
00069 
00070 protected:
00071     /*!
00072      * @brief Initializes the radio I/Os pins interface
00073      */
00074     virtual void IoInit( void );
00075 
00076     /*!
00077      *  @brief Initializes the radio registers
00078      */
00079     virtual void RadioRegistersInit( );
00080     
00081     /*!
00082      * @brief Initializes the radio SPI
00083      */
00084     virtual void SpiInit( void );
00085 
00086     /*!
00087      * @brief Initializes DIO IRQ handlers
00088      *
00089      * @param [IN] irqHandlers Array containing the IRQ callback functions
00090      */
00091     virtual void IoIrqInit( DioIrqHandler *irqHandlers );
00092 
00093     /*!
00094      * @brief De-initializes the radio I/Os pins interface. 
00095      *
00096      * \remark Useful when going in MCU lowpower modes
00097      */
00098     virtual void IoDeInit( void );
00099 
00100     /*!
00101      * @brief Gets the board PA selection configuration
00102      *
00103      * @param [IN] channel Channel frequency in Hz
00104      * @retval PaSelect RegPaConfig PaSelect value
00105      */
00106     virtual uint8_t GetPaSelect( uint32_t channel );
00107 
00108     /*!
00109      * @brief Set the RF Switch I/Os pins in Low Power mode
00110      *
00111      * @param [IN] status enable or disable
00112      */
00113     virtual void SetAntSwLowPower( bool status );
00114 
00115     /*!
00116      * @brief Initializes the RF Switch I/Os pins interface
00117      */
00118     virtual void AntSwInit( void );
00119 
00120     /*!
00121      * @brief De-initializes the RF Switch I/Os pins interface 
00122      *
00123      * \remark Needed to decrease the power consumption in MCU lowpower modes
00124      */
00125     virtual void AntSwDeInit( void );
00126 
00127     /*!
00128      * @brief Controls the antena switch if necessary.
00129      *
00130      * \remark see errata note
00131      *
00132      * @param [IN] rxTx [1: Tx, 0: Rx]
00133      */
00134     virtual void SetAntSw( uint8_t rxTx  );
00135 
00136 public:
00137     /*!
00138      * @brief Detect the board connected by reading the value of the antenna switch pin
00139      */
00140     virtual uint8_t DetectBoardType( void );    
00141 
00142     /*!
00143      * @brief Checks if the given RF frequency is supported by the hardware
00144      *
00145      * @param [IN] frequency RF frequency to be checked
00146      * @retval isSupported [true: supported, false: unsupported]
00147      */
00148     virtual bool CheckRfFrequency( uint32_t frequency );
00149 
00150     /*!
00151      * @brief Writes the radio register at the specified address
00152      *
00153      * @param [IN]: addr Register address
00154      * @param [IN]: data New register value
00155      */
00156     virtual void Write ( uint8_t addr, uint8_t data ) ;
00157 
00158     /*!
00159      * @brief Reads the radio register at the specified address
00160      *
00161      * @param [IN]: addr Register address
00162      * @retval data Register value
00163      */
00164     virtual uint8_t Read ( uint8_t addr ) ;
00165 
00166     /*!
00167      * @brief Writes multiple radio registers starting at address
00168      *
00169      * @param [IN] addr   First Radio register address
00170      * @param [IN] buffer Buffer containing the new register's values
00171      * @param [IN] size   Number of registers to be written
00172      */
00173     virtual void Write( uint8_t addr, uint8_t *buffer, uint8_t size ) ;
00174 
00175     /*!
00176      * @brief Reads multiple radio registers starting at address
00177      *
00178      * @param [IN] addr First Radio register address
00179      * @param [OUT] buffer Buffer where to copy the registers data
00180      * @param [IN] size Number of registers to be read
00181      */
00182     virtual void Read ( uint8_t addr, uint8_t *buffer, uint8_t size ) ;
00183 
00184     /*!
00185      * @brief Writes the buffer contents to the SX1276 FIFO
00186      *
00187      * @param [IN] buffer Buffer containing data to be put on the FIFO.
00188      * @param [IN] size Number of bytes to be written to the FIFO
00189      */
00190     virtual void WriteFifo( uint8_t *buffer, uint8_t size ) ;
00191 
00192     /*!
00193      * @brief Reads the contents of the SX1276 FIFO
00194      *
00195      * @param [OUT] buffer Buffer where to copy the FIFO read data.
00196      * @param [IN] size Number of bytes to be read from the FIFO
00197      */
00198     virtual void ReadFifo( uint8_t *buffer, uint8_t size ) ;
00199 
00200     /*!
00201      * @brief Reset the SX1276
00202      */
00203     virtual void Reset( void );
00204 };
00205 
00206 #endif // __SX1276_HAL_H__