Igor Levkov / BLE_API

test

Dependents:   BLE_PowerBank_HeyFaradey

Fork of BLE_API by Bluetooth Low Energy

ble/BLE.h@858:38a4963a455e, 2015-11-02 (annotated)

Committer:
rgrover1
Date:
Mon Nov 02 09:09:07 2015 +0000
Revision:
858:38a4963a455e
Parent:
857:7f578be2d01d
Child:
860:0d41e4eb3d0a
Synchronized with git rev e46cef5d

Author: Rohit Grover

Merge pull request #91 from rgrover/develop



BLE::init() now takes in a callback paramter

Who changed what in which revision?

UserRevisionLine numberNew contents of line
rgrover1 716:11b41f651697 1 /* mbed Microcontroller Library
rgrover1 716:11b41f651697 2 * Copyright (c) 2006-2013 ARM Limited
rgrover1 716:11b41f651697 3 *
rgrover1 716:11b41f651697 4 * Licensed under the Apache License, Version 2.0 (the "License");
rgrover1 716:11b41f651697 5 * you may not use this file except in compliance with the License.
rgrover1 716:11b41f651697 6 * You may obtain a copy of the License at
rgrover1 716:11b41f651697 7 *
rgrover1 716:11b41f651697 8 * http://www.apache.org/licenses/LICENSE-2.0
rgrover1 716:11b41f651697 9 *
rgrover1 716:11b41f651697 10 * Unless required by applicable law or agreed to in writing, software
rgrover1 716:11b41f651697 11 * distributed under the License is distributed on an "AS IS" BASIS,
rgrover1 716:11b41f651697 12 * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
rgrover1 716:11b41f651697 13 * See the License for the specific language governing permissions and
rgrover1 716:11b41f651697 14 * limitations under the License.
rgrover1 716:11b41f651697 15 */
rgrover1 716:11b41f651697 16
rgrover1 716:11b41f651697 17 #ifndef __BLE_H__
rgrover1 716:11b41f651697 18 #define __BLE_H__
rgrover1 716:11b41f651697 19
rgrover1 716:11b41f651697 20 #include "blecommon.h"
rgrover1 716:11b41f651697 21 #include "Gap.h"
rgrover1 716:11b41f651697 22 #include "GattServer.h"
rgrover1 716:11b41f651697 23 #include "GattClient.h"
rgrover1 716:11b41f651697 24
rgrover1 853:2e829bcda785 25 #ifdef YOTTA_CFG_MBED_OS
rgrover1 853:2e829bcda785 26 #include "mbed-drivers/mbed_error.h"
rgrover1 853:2e829bcda785 27 #else
rgrover1 818:61c62a287194 28 #include "mbed_error.h"
rgrover1 853:2e829bcda785 29 #endif
rgrover1 818:61c62a287194 30
rgrover1 858:38a4963a455e 31 /* forward declaration for the implementation class */
rgrover1 858:38a4963a455e 32 class BLEInstanceBase;
rgrover1 858:38a4963a455e 33
rgrover1 716:11b41f651697 34 /**
rgrover1 716:11b41f651697 35 * The base class used to abstract away BLE capable radio transceivers or SOCs,
rgrover1 716:11b41f651697 36 * to enable this BLE API to work with any radio transparently.
rgrover1 716:11b41f651697 37 */
rgrover1 716:11b41f651697 38 class BLE
rgrover1 716:11b41f651697 39 {
rgrover1 716:11b41f651697 40 public:
rgrover1 858:38a4963a455e 41 typedef unsigned InstanceID_t; /** The type returned by BLE::getInstanceID(). */
rgrover1 858:38a4963a455e 42
rgrover1 858:38a4963a455e 43 /**
rgrover1 858:38a4963a455e 44 * The function signature for callbacks for initialization completion.
rgrover1 858:38a4963a455e 45 * @param ble
rgrover1 858:38a4963a455e 46 * A reference to the BLE instance being initialized.
rgrover1 858:38a4963a455e 47 * @param error
rgrover1 858:38a4963a455e 48 * This captures the result of initialization. It is set to
rgrover1 858:38a4963a455e 49 * BLE_ERROR_NONE if initialization completed successfully. Else
rgrover1 858:38a4963a455e 50 * the error value is implementation specific.
rgrover1 858:38a4963a455e 51 *
rgrover1 858:38a4963a455e 52 */
rgrover1 858:38a4963a455e 53 typedef void (*InitializationCompleteCallback_t)(BLE &ble, ble_error_t error);
rgrover1 858:38a4963a455e 54
rgrover1 716:11b41f651697 55 /**
rgrover1 716:11b41f651697 56 * Initialize the BLE controller. This should be called before using
rgrover1 716:11b41f651697 57 * anything else in the BLE_API.
rgrover1 716:11b41f651697 58 *
rgrover1 716:11b41f651697 59 * init() hands control to the underlying BLE module to accomplish
rgrover1 716:11b41f651697 60 * initialization. This initialization may tacitly depend on other hardware
rgrover1 716:11b41f651697 61 * setup (such as clocks or power-modes) which happens early on during
rgrover1 716:11b41f651697 62 * system startup. It may not be safe to call init() from global static
rgrover1 716:11b41f651697 63 * context where ordering is compiler specific and can't be guaranteed--it
rgrover1 716:11b41f651697 64 * is safe to call BLE::init() from within main().
rgrover1 858:38a4963a455e 65 *
rgrover1 858:38a4963a455e 66 * @param callback
rgrover1 858:38a4963a455e 67 * A callback for when initialization completes for a BLE
rgrover1 858:38a4963a455e 68 * instance. This is an optional parameter, if no callback is
rgrover1 858:38a4963a455e 69 * setup the application can still determine the status of
rgrover1 858:38a4963a455e 70 * initialization using BLE::hasInitialized() (see below).
rgrover1 858:38a4963a455e 71 *
rgrover1 858:38a4963a455e 72 * @return BLE_ERROR_NONE if the initialization procedure was started
rgrover1 858:38a4963a455e 73 * successfully.
rgrover1 858:38a4963a455e 74 *
rgrover1 858:38a4963a455e 75 * @note The underlying stack must invoke the initialization completion
rgrover1 858:38a4963a455e 76 * callback in response to init(). In some cases, initialization is
rgrover1 858:38a4963a455e 77 * instantaneous (or blocking); if so, it is acceptable for the stack-
rgrover1 858:38a4963a455e 78 * specific implementation of init() to invoke the completion callback
rgrover1 858:38a4963a455e 79 * directly--i.e. within its own context.
rgrover1 858:38a4963a455e 80 *
rgrover1 858:38a4963a455e 81 * @note Nearly all BLE APIs would return
rgrover1 858:38a4963a455e 82 * BLE_ERROR_INITIALIZATION_INCOMPLETE if used on an instance before the
rgrover1 858:38a4963a455e 83 * corresponding transport is initialized.
rgrover1 716:11b41f651697 84 */
rgrover1 858:38a4963a455e 85 ble_error_t init(InitializationCompleteCallback_t callback = NULL);
rgrover1 858:38a4963a455e 86
rgrover1 858:38a4963a455e 87 /**
rgrover1 858:38a4963a455e 88 * @return true if initialization has completed for the underlying BLE
rgrover1 858:38a4963a455e 89 * transport.
rgrover1 858:38a4963a455e 90 *
rgrover1 858:38a4963a455e 91 * The application can setup a callback to signal completion of
rgrover1 858:38a4963a455e 92 * initialization when using init(). Otherwise, this method can be used to
rgrover1 858:38a4963a455e 93 * poll the state of initialization.
rgrover1 858:38a4963a455e 94 */
rgrover1 858:38a4963a455e 95 bool hasInitialized(void) const;
rgrover1 716:11b41f651697 96
rgrover1 716:11b41f651697 97 /**
rgrover1 716:11b41f651697 98 * Purge the BLE stack of GATT and GAP state. init() must be called
rgrover1 716:11b41f651697 99 * afterwards to re-instate services and GAP state. This API offers a way to
rgrover1 716:11b41f651697 100 * repopulate the GATT database with new services and characteristics.
rgrover1 716:11b41f651697 101 */
rgrover1 858:38a4963a455e 102 ble_error_t shutdown(void);
rgrover1 716:11b41f651697 103
rgrover1 716:11b41f651697 104 /**
rgrover1 716:11b41f651697 105 * This call allows the application to get the BLE stack version information.
rgrover1 716:11b41f651697 106 *
rgrover1 716:11b41f651697 107 * @return A pointer to a const string representing the version.
rgrover1 716:11b41f651697 108 * Note: The string is owned by the BLE_API.
rgrover1 716:11b41f651697 109 */
rgrover1 858:38a4963a455e 110 const char *getVersion(void);
rgrover1 716:11b41f651697 111
rgrover1 716:11b41f651697 112 /*
rgrover1 716:11b41f651697 113 * Accessors to GAP. Please refer to Gap.h. All GAP related functionality requires
rgrover1 716:11b41f651697 114 * going through this accessor.
rgrover1 716:11b41f651697 115 */
rgrover1 858:38a4963a455e 116 const Gap &gap() const;
rgrover1 858:38a4963a455e 117 Gap &gap();
rgrover1 716:11b41f651697 118
rgrover1 716:11b41f651697 119 /*
rgrover1 716:11b41f651697 120 * Accessors to GATT Server. Please refer to GattServer.h. All GATTServer related
rgrover1 716:11b41f651697 121 * functionality requires going through this accessor.
rgrover1 716:11b41f651697 122 */
rgrover1 858:38a4963a455e 123 const GattServer& gattServer() const;
rgrover1 858:38a4963a455e 124 GattServer& gattServer();
rgrover1 716:11b41f651697 125
rgrover1 716:11b41f651697 126 /*
rgrover1 716:11b41f651697 127 * Accessors to GATT Client. Please refer to GattClient.h. All GATTClient related
rgrover1 716:11b41f651697 128 * functionality requires going through this accessor.
rgrover1 716:11b41f651697 129 */
rgrover1 858:38a4963a455e 130 const GattClient& gattClient() const;
rgrover1 858:38a4963a455e 131 GattClient& gattClient();
rgrover1 716:11b41f651697 132
rgrover1 716:11b41f651697 133 /*
rgrover1 716:11b41f651697 134 * Accessors to Security Manager. Please refer to SecurityManager.h. All
rgrover1 716:11b41f651697 135 * SecurityManager related functionality requires going through this
rgrover1 716:11b41f651697 136 * accessor.
rgrover1 716:11b41f651697 137 */
rgrover1 858:38a4963a455e 138 const SecurityManager& securityManager() const;
rgrover1 858:38a4963a455e 139 SecurityManager& securityManager();
rgrover1 716:11b41f651697 140
rgrover1 716:11b41f651697 141 /**
rgrover1 716:11b41f651697 142 * Yield control to the BLE stack or to other tasks waiting for events. This
rgrover1 716:11b41f651697 143 * is a sleep function which will return when there is an application
rgrover1 716:11b41f651697 144 * specific interrupt, but the MCU might wake up several times before
rgrover1 716:11b41f651697 145 * returning (to service the stack). This is not always interchangeable with
rgrover1 716:11b41f651697 146 * WFE().
rgrover1 716:11b41f651697 147 */
rgrover1 858:38a4963a455e 148 void waitForEvent(void);
rgrover1 716:11b41f651697 149
rgrover1 822:a0f080d1e836 150 public:
rgrover1 822:a0f080d1e836 151 static const InstanceID_t DEFAULT_INSTANCE = 0;
rgrover1 822:a0f080d1e836 152 #ifndef YOTTA_CFG_BLE_INSTANCES_COUNT
rgrover1 822:a0f080d1e836 153 static const InstanceID_t NUM_INSTANCES = 1;
rgrover1 822:a0f080d1e836 154 #else
rgrover1 822:a0f080d1e836 155 static const InstanceID_t NUM_INSTANCES = YOTTA_CFG_BLE_INSTANCES_COUNT;
rgrover1 822:a0f080d1e836 156 #endif
rgrover1 822:a0f080d1e836 157
rgrover1 822:a0f080d1e836 158 /**
rgrover1 822:a0f080d1e836 159 * Get a reference to the BLE singleton corresponding to a given interface.
rgrover1 822:a0f080d1e836 160 * There is a static array of BLE singletons.
rgrover1 822:a0f080d1e836 161 *
rgrover1 822:a0f080d1e836 162 * @Note: Calling Instance() is preferred over constructing a BLE object
rgrover1 822:a0f080d1e836 163 * directly, as it returns references to singletons.
rgrover1 822:a0f080d1e836 164 *
rgrover1 822:a0f080d1e836 165 * @param[in] id
rgrover1 822:a0f080d1e836 166 * Instance-ID. This should be less than NUM_INSTANCES in order
rgrover1 822:a0f080d1e836 167 * for the returned BLE singleton to be useful.
rgrover1 822:a0f080d1e836 168 *
rgrover1 822:a0f080d1e836 169 * @return a reference to a single object
rgrover1 822:a0f080d1e836 170 */
rgrover1 822:a0f080d1e836 171 static BLE &Instance(InstanceID_t id = DEFAULT_INSTANCE);
rgrover1 822:a0f080d1e836 172
rgrover1 822:a0f080d1e836 173 /**
rgrover1 822:a0f080d1e836 174 * Constructor for a handle to a BLE instance (i.e. BLE stack). BLE handles
rgrover1 822:a0f080d1e836 175 * are thin wrappers around a transport object (i.e. ptr. to
rgrover1 822:a0f080d1e836 176 * BLEInstanceBase).
rgrover1 822:a0f080d1e836 177 *
rgrover1 822:a0f080d1e836 178 * BLE objects are are better created as singletons accessed through the
rgrover1 822:a0f080d1e836 179 * Instance() method. If multiple BLE handles are constructed for the same
rgrover1 822:a0f080d1e836 180 * interface (using this constructor), they will share the same underlying
rgrover1 822:a0f080d1e836 181 * transport object.
rgrover1 822:a0f080d1e836 182 */
rgrover1 822:a0f080d1e836 183 BLE(InstanceID_t instanceID = DEFAULT_INSTANCE);
rgrover1 822:a0f080d1e836 184
rgrover1 858:38a4963a455e 185 /**
rgrover1 858:38a4963a455e 186 * Fetch the ID of a BLE instance. Typically there would only be the DEFAULT_INSTANCE.
rgrover1 858:38a4963a455e 187 */
rgrover1 858:38a4963a455e 188 InstanceID_t getInstanceID(void) const {
rgrover1 858:38a4963a455e 189 return instanceID;
rgrover1 858:38a4963a455e 190 }
rgrover1 822:a0f080d1e836 191
rgrover1 716:11b41f651697 192 /*
rgrover1 716:11b41f651697 193 * Deprecation alert!
rgrover1 716:11b41f651697 194 * All of the following are deprecated and may be dropped in a future
rgrover1 716:11b41f651697 195 * release. Documentation should refer to alternative APIs.
rgrover1 716:11b41f651697 196 */
rgrover1 716:11b41f651697 197
rgrover1 716:11b41f651697 198 /* GAP specific APIs. */
rgrover1 716:11b41f651697 199 public:
rgrover1 716:11b41f651697 200 /**
rgrover1 716:11b41f651697 201 * Set the BTLE MAC address and type.
rgrover1 716:11b41f651697 202 * @return BLE_ERROR_NONE on success.
rgrover1 716:11b41f651697 203 *
rgrover1 716:11b41f651697 204 * @note: This API is now *deprecated* and will be dropped in the future.
rgrover1 716:11b41f651697 205 * You should use the parallel API from Gap directly. A former call to
rgrover1 716:11b41f651697 206 * ble.setAddress(...) should be replaced with
rgrover1 716:11b41f651697 207 * ble.gap().setAddress(...).
rgrover1 716:11b41f651697 208 */
rgrover1 716:11b41f651697 209 ble_error_t setAddress(Gap::AddressType_t type, const Gap::Address_t address) {
rgrover1 716:11b41f651697 210 return gap().setAddress(type, address);
rgrover1 716:11b41f651697 211 }
rgrover1 716:11b41f651697 212
rgrover1 716:11b41f651697 213 /**
rgrover1 716:11b41f651697 214 * Fetch the BTLE MAC address and type.
rgrover1 716:11b41f651697 215 * @return BLE_ERROR_NONE on success.
rgrover1 716:11b41f651697 216 *
rgrover1 716:11b41f651697 217 * @note: This API is now *deprecated* and will be dropped in the future.
rgrover1 716:11b41f651697 218 * You should use the parallel API from Gap directly. A former call to
rgrover1 716:11b41f651697 219 * ble.getAddress(...) should be replaced with
rgrover1 716:11b41f651697 220 * ble.gap().getAddress(...).
rgrover1 716:11b41f651697 221 */
rgrover1 716:11b41f651697 222 ble_error_t getAddress(Gap::AddressType_t *typeP, Gap::Address_t address) {
rgrover1 716:11b41f651697 223 return gap().getAddress(typeP, address);
rgrover1 716:11b41f651697 224 }
rgrover1 716:11b41f651697 225
rgrover1 716:11b41f651697 226 /**
rgrover1 716:11b41f651697 227 * Set the GAP advertising mode to use for this device.
rgrover1 716:11b41f651697 228 *
rgrover1 716:11b41f651697 229 * @note: This API is now *deprecated* and will be dropped in the future.
rgrover1 716:11b41f651697 230 * You should use the parallel API from Gap directly. A former call to
rgrover1 716:11b41f651697 231 * ble.setAdvertisingType(...) should be replaced with
rgrover1 716:11b41f651697 232 * ble.gap().setAdvertisingType(...).
rgrover1 716:11b41f651697 233 */
rgrover1 716:11b41f651697 234 void setAdvertisingType(GapAdvertisingParams::AdvertisingType advType) {
rgrover1 716:11b41f651697 235 gap().setAdvertisingType(advType);
rgrover1 716:11b41f651697 236 }
rgrover1 716:11b41f651697 237
rgrover1 716:11b41f651697 238 /**
rgrover1 716:11b41f651697 239 * @param[in] interval
rgrover1 716:11b41f651697 240 * Advertising interval in units of milliseconds. Advertising
rgrover1 716:11b41f651697 241 * is disabled if interval is 0. If interval is smaller than
rgrover1 716:11b41f651697 242 * the minimum supported value, then the minimum supported
rgrover1 716:11b41f651697 243 * value is used instead. This minimum value can be discovered
rgrover1 716:11b41f651697 244 * using getMinAdvertisingInterval().
rgrover1 716:11b41f651697 245 *
rgrover1 716:11b41f651697 246 * This field must be set to 0 if connectionMode is equal
rgrover1 716:11b41f651697 247 * to ADV_CONNECTABLE_DIRECTED.
rgrover1 716:11b41f651697 248 *
rgrover1 716:11b41f651697 249 * @note: Decreasing this value will allow central devices to detect a
rgrover1 716:11b41f651697 250 * peripheral faster at the expense of more power being used by the radio
rgrover1 716:11b41f651697 251 * due to the higher data transmit rate.
rgrover1 716:11b41f651697 252 *
rgrover1 716:11b41f651697 253 * @note: This API is now *deprecated* and will be dropped in the future.
rgrover1 716:11b41f651697 254 * You should use the parallel API from Gap directly. A former call to
rgrover1 716:11b41f651697 255 * ble.setAdvertisingInterval(...) should be replaced with
rgrover1 716:11b41f651697 256 * ble.gap().setAdvertisingInterval(...).
rgrover1 716:11b41f651697 257 *
rgrover1 716:11b41f651697 258 * @note: [WARNING] This API previously used 0.625ms as the unit for its
rgrover1 716:11b41f651697 259 * 'interval' argument. That required an explicit conversion from
rgrover1 716:11b41f651697 260 * milliseconds using Gap::MSEC_TO_GAP_DURATION_UNITS(). This conversion is
rgrover1 716:11b41f651697 261 * no longer required as the new units are milliseconds. Any application
rgrover1 716:11b41f651697 262 * code depending on the old semantics would need to be updated accordingly.
rgrover1 716:11b41f651697 263 */
rgrover1 716:11b41f651697 264 void setAdvertisingInterval(uint16_t interval) {
rgrover1 716:11b41f651697 265 gap().setAdvertisingInterval(interval);
rgrover1 716:11b41f651697 266 }
rgrover1 716:11b41f651697 267
rgrover1 716:11b41f651697 268 /**
rgrover1 716:11b41f651697 269 * @return Minimum Advertising interval in milliseconds.
rgrover1 716:11b41f651697 270 *
rgrover1 716:11b41f651697 271 * @note: This API is now *deprecated* and will be dropped in the future.
rgrover1 716:11b41f651697 272 * You should use the parallel API from Gap directly. A former call to
rgrover1 716:11b41f651697 273 * ble.getMinAdvertisingInterval(...) should be replaced with
rgrover1 716:11b41f651697 274 * ble.gap().getMinAdvertisingInterval(...).
rgrover1 716:11b41f651697 275 */
rgrover1 716:11b41f651697 276 uint16_t getMinAdvertisingInterval(void) const {
rgrover1 716:11b41f651697 277 return gap().getMinAdvertisingInterval();
rgrover1 716:11b41f651697 278 }
rgrover1 716:11b41f651697 279
rgrover1 716:11b41f651697 280 /**
rgrover1 716:11b41f651697 281 * @return Minimum Advertising interval in milliseconds for non-connectible mode.
rgrover1 716:11b41f651697 282 *
rgrover1 716:11b41f651697 283 * @note: This API is now *deprecated* and will be dropped in the future.
rgrover1 716:11b41f651697 284 * You should use the parallel API from Gap directly. A former call to
rgrover1 716:11b41f651697 285 * ble.getMinNonConnectableAdvertisingInterval(...) should be replaced with
rgrover1 716:11b41f651697 286 * ble.gap().getMinNonConnectableAdvertisingInterval(...).
rgrover1 716:11b41f651697 287 */
rgrover1 716:11b41f651697 288 uint16_t getMinNonConnectableAdvertisingInterval(void) const {
rgrover1 716:11b41f651697 289 return gap().getMinNonConnectableAdvertisingInterval();
rgrover1 716:11b41f651697 290 }
rgrover1 716:11b41f651697 291
rgrover1 716:11b41f651697 292 /**
rgrover1 716:11b41f651697 293 * @return Maximum Advertising interval in milliseconds.
rgrover1 716:11b41f651697 294 *
rgrover1 716:11b41f651697 295 * @note: This API is now *deprecated* and will be dropped in the future.
rgrover1 716:11b41f651697 296 * You should use the parallel API from Gap directly. A former call to
rgrover1 716:11b41f651697 297 * ble.getMaxAdvertisingInterval(...) should be replaced with
rgrover1 716:11b41f651697 298 * ble.gap().getMaxAdvertisingInterval(...).
rgrover1 716:11b41f651697 299 */
rgrover1 716:11b41f651697 300 uint16_t getMaxAdvertisingInterval(void) const {
rgrover1 716:11b41f651697 301 return gap().getMaxAdvertisingInterval();
rgrover1 716:11b41f651697 302 }
rgrover1 716:11b41f651697 303
rgrover1 716:11b41f651697 304 /**
rgrover1 716:11b41f651697 305 * @param[in] timeout
rgrover1 716:11b41f651697 306 * Advertising timeout (in seconds) between 0x1 and 0x3FFF (1
rgrover1 716:11b41f651697 307 * and 16383). Use 0 to disable the advertising timeout.
rgrover1 716:11b41f651697 308 *
rgrover1 716:11b41f651697 309 * @note: This API is now *deprecated* and will be dropped in the future.
rgrover1 716:11b41f651697 310 * You should use the parallel API from Gap directly. A former call to
rgrover1 716:11b41f651697 311 * ble.setAdvertisingTimeout(...) should be replaced with
rgrover1 716:11b41f651697 312 * ble.gap().setAdvertisingTimeout(...).
rgrover1 716:11b41f651697 313 */
rgrover1 716:11b41f651697 314 void setAdvertisingTimeout(uint16_t timeout) {
rgrover1 716:11b41f651697 315 gap().setAdvertisingTimeout(timeout);
rgrover1 716:11b41f651697 316 }
rgrover1 716:11b41f651697 317
rgrover1 716:11b41f651697 318 /**
rgrover1 716:11b41f651697 319 * Setup a particular, user-constructed set of advertisement parameters for
rgrover1 716:11b41f651697 320 * the underlying stack. It would be uncommon for this API to be used
rgrover1 716:11b41f651697 321 * directly; there are other APIs to tweak advertisement parameters
rgrover1 716:11b41f651697 322 * individually (see above).
rgrover1 716:11b41f651697 323 *
rgrover1 716:11b41f651697 324 * @note: This API is now *deprecated* and will be dropped in the future.
rgrover1 716:11b41f651697 325 * You should use the parallel API from Gap directly. A former call to
rgrover1 716:11b41f651697 326 * ble.setAdvertisingParams(...) should be replaced with
rgrover1 716:11b41f651697 327 * ble.gap().setAdvertisingParams(...).
rgrover1 716:11b41f651697 328 */
rgrover1 716:11b41f651697 329 void setAdvertisingParams(const GapAdvertisingParams &advParams) {
rgrover1 716:11b41f651697 330 gap().setAdvertisingParams(advParams);
rgrover1 716:11b41f651697 331 }
rgrover1 716:11b41f651697 332
rgrover1 716:11b41f651697 333 /**
rgrover1 716:11b41f651697 334 * @return Read back advertising parameters. Useful for storing and
rgrover1 716:11b41f651697 335 * restoring parameters rapidly.
rgrover1 716:11b41f651697 336 *
rgrover1 716:11b41f651697 337 * @note: This API is now *deprecated* and will be dropped in the future.
rgrover1 716:11b41f651697 338 * You should use the parallel API from Gap directly. A former call to
rgrover1 716:11b41f651697 339 * ble.getAdvertisingParams(...) should be replaced with
rgrover1 716:11b41f651697 340 * ble.gap().getAdvertisingParams(...).
rgrover1 716:11b41f651697 341 */
rgrover1 716:11b41f651697 342 const GapAdvertisingParams &getAdvertisingParams(void) const {
rgrover1 716:11b41f651697 343 return gap().getAdvertisingParams();
rgrover1 716:11b41f651697 344 }
rgrover1 716:11b41f651697 345
rgrover1 716:11b41f651697 346 /**
rgrover1 716:11b41f651697 347 * Accumulate an AD structure in the advertising payload. Please note that
rgrover1 716:11b41f651697 348 * the payload is limited to 31 bytes. The SCAN_RESPONSE message may be used
rgrover1 716:11b41f651697 349 * as an additional 31 bytes if the advertising payload proves to be too
rgrover1 716:11b41f651697 350 * small.
rgrover1 716:11b41f651697 351 *
rgrover1 716:11b41f651697 352 * @param[in] flags
rgrover1 716:11b41f651697 353 * The flags to be added. Please refer to
rgrover1 716:11b41f651697 354 * GapAdvertisingData::Flags for valid flags. Multiple
rgrover1 716:11b41f651697 355 * flags may be specified in combination.
rgrover1 716:11b41f651697 356 *
rgrover1 716:11b41f651697 357 * @note: This API is now *deprecated* and will be dropped in the future.
rgrover1 716:11b41f651697 358 * You should use the parallel API from Gap directly. A former call to
rgrover1 716:11b41f651697 359 * ble.accumulateAdvertisingPayload(flags) should be replaced with
rgrover1 716:11b41f651697 360 * ble.gap().accumulateAdvertisingPayload(flags).
rgrover1 716:11b41f651697 361 */
rgrover1 716:11b41f651697 362 ble_error_t accumulateAdvertisingPayload(uint8_t flags) {
rgrover1 716:11b41f651697 363 return gap().accumulateAdvertisingPayload(flags);
rgrover1 716:11b41f651697 364 }
rgrover1 716:11b41f651697 365
rgrover1 716:11b41f651697 366 /**
rgrover1 716:11b41f651697 367 * Accumulate an AD structure in the advertising payload. Please note that
rgrover1 716:11b41f651697 368 * the payload is limited to 31 bytes. The SCAN_RESPONSE message may be used
rgrover1 716:11b41f651697 369 * as an additional 31 bytes if the advertising payload proves to be too
rgrover1 716:11b41f651697 370 * small.
rgrover1 716:11b41f651697 371 *
rgrover1 716:11b41f651697 372 * @param[in] app
rgrover1 716:11b41f651697 373 * The appearance of the peripheral.
rgrover1 716:11b41f651697 374 *
rgrover1 716:11b41f651697 375 * @note: This API is now *deprecated* and will be dropped in the future.
rgrover1 716:11b41f651697 376 * You should use the parallel API from Gap directly. A former call to
rgrover1 716:11b41f651697 377 * ble.accumulateAdvertisingPayload(appearance) should be replaced with
rgrover1 716:11b41f651697 378 * ble.gap().accumulateAdvertisingPayload(appearance).
rgrover1 716:11b41f651697 379 */
rgrover1 716:11b41f651697 380 ble_error_t accumulateAdvertisingPayload(GapAdvertisingData::Appearance app) {
rgrover1 716:11b41f651697 381 return gap().accumulateAdvertisingPayload(app);
rgrover1 716:11b41f651697 382 }
rgrover1 716:11b41f651697 383
rgrover1 716:11b41f651697 384 /**
rgrover1 716:11b41f651697 385 * Accumulate an AD structure in the advertising payload. Please note that
rgrover1 716:11b41f651697 386 * the payload is limited to 31 bytes. The SCAN_RESPONSE message may be used
rgrover1 716:11b41f651697 387 * as an additional 31 bytes if the advertising payload proves to be too
rgrover1 716:11b41f651697 388 * small.
rgrover1 716:11b41f651697 389 *
rgrover1 716:11b41f651697 390 * @param[in] app
rgrover1 716:11b41f651697 391 * The max transmit power to be used by the controller. This
rgrover1 716:11b41f651697 392 * is only a hint.
rgrover1 716:11b41f651697 393 *
rgrover1 716:11b41f651697 394 * @note: This API is now *deprecated* and will be dropped in the future.
rgrover1 716:11b41f651697 395 * You should use the parallel API from Gap directly. A former call to
rgrover1 716:11b41f651697 396 * ble.accumulateAdvertisingPayloadTxPower(txPower) should be replaced with
rgrover1 716:11b41f651697 397 * ble.gap().accumulateAdvertisingPayloadTxPower(txPower).
rgrover1 716:11b41f651697 398 */
rgrover1 716:11b41f651697 399 ble_error_t accumulateAdvertisingPayloadTxPower(int8_t power) {
rgrover1 716:11b41f651697 400 return gap().accumulateAdvertisingPayloadTxPower(power);
rgrover1 716:11b41f651697 401 }
rgrover1 716:11b41f651697 402
rgrover1 716:11b41f651697 403 /**
rgrover1 716:11b41f651697 404 * Accumulate a variable length byte-stream as an AD structure in the
rgrover1 716:11b41f651697 405 * advertising payload. Please note that the payload is limited to 31 bytes.
rgrover1 716:11b41f651697 406 * The SCAN_RESPONSE message may be used as an additional 31 bytes if the
rgrover1 716:11b41f651697 407 * advertising payload proves to be too small.
rgrover1 716:11b41f651697 408 *
rgrover1 716:11b41f651697 409 * @param type The type which describes the variable length data.
rgrover1 716:11b41f651697 410 * @param data data bytes.
rgrover1 716:11b41f651697 411 * @param len length of data.
rgrover1 716:11b41f651697 412 *
rgrover1 716:11b41f651697 413 * @note: This API is now *deprecated* and will be dropped in the future.
rgrover1 716:11b41f651697 414 * You should use the parallel API from Gap directly. A former call to
rgrover1 716:11b41f651697 415 * ble.accumulateAdvertisingPayload(...) should be replaced with
rgrover1 716:11b41f651697 416 * ble.gap().accumulateAdvertisingPayload(...).
rgrover1 716:11b41f651697 417 */
rgrover1 716:11b41f651697 418 ble_error_t accumulateAdvertisingPayload(GapAdvertisingData::DataType type, const uint8_t *data, uint8_t len) {
rgrover1 716:11b41f651697 419 return gap().accumulateAdvertisingPayload(type, data, len);
rgrover1 716:11b41f651697 420 }
rgrover1 716:11b41f651697 421
rgrover1 716:11b41f651697 422 /**
rgrover1 716:11b41f651697 423 * Setup a particular, user-constructed advertisement payload for the
rgrover1 716:11b41f651697 424 * underlying stack. It would be uncommon for this API to be used directly;
rgrover1 716:11b41f651697 425 * there are other APIs to build an advertisement payload (see above).
rgrover1 716:11b41f651697 426 *
rgrover1 716:11b41f651697 427 * @note: This API is now *deprecated* and will be dropped in the future.
rgrover1 716:11b41f651697 428 * You should use the parallel API from Gap directly. A former call to
rgrover1 716:11b41f651697 429 * ble.setAdvertisingData(...) should be replaced with
rgrover1 716:11b41f651697 430 * ble.gap().setAdvertisingPayload(...).
rgrover1 716:11b41f651697 431 */
rgrover1 716:11b41f651697 432 ble_error_t setAdvertisingData(const GapAdvertisingData &advData) {
rgrover1 716:11b41f651697 433 return gap().setAdvertisingPayload(advData);
rgrover1 716:11b41f651697 434 }
rgrover1 716:11b41f651697 435
rgrover1 716:11b41f651697 436 /**
rgrover1 716:11b41f651697 437 * @return Read back advertising data. Useful for storing and
rgrover1 716:11b41f651697 438 * restoring payload.
rgrover1 716:11b41f651697 439 *
rgrover1 716:11b41f651697 440 * @note: This API is now *deprecated* and will be dropped in the future.
rgrover1 716:11b41f651697 441 * You should use the parallel API from Gap directly. A former call to
rgrover1 716:11b41f651697 442 * ble.getAdvertisingData(...) should be replaced with
rgrover1 716:11b41f651697 443 * ble.gap().getAdvertisingPayload()(...).
rgrover1 716:11b41f651697 444 */
rgrover1 716:11b41f651697 445 const GapAdvertisingData &getAdvertisingData(void) const {
rgrover1 716:11b41f651697 446 return gap().getAdvertisingPayload();
rgrover1 716:11b41f651697 447 }
rgrover1 716:11b41f651697 448
rgrover1 716:11b41f651697 449 /**
rgrover1 716:11b41f651697 450 * Reset any advertising payload prepared from prior calls to
rgrover1 716:11b41f651697 451 * accumulateAdvertisingPayload(). This automatically propagates the re-
rgrover1 716:11b41f651697 452 * initialized adv payload to the underlying stack.
rgrover1 716:11b41f651697 453 *
rgrover1 716:11b41f651697 454 * @note: This API is now *deprecated* and will be dropped in the future.
rgrover1 716:11b41f651697 455 * You should use the parallel API from Gap directly. A former call to
rgrover1 716:11b41f651697 456 * ble.clearAdvertisingPayload(...) should be replaced with
rgrover1 716:11b41f651697 457 * ble.gap().clearAdvertisingPayload(...).
rgrover1 716:11b41f651697 458 */
rgrover1 716:11b41f651697 459 void clearAdvertisingPayload(void) {
rgrover1 716:11b41f651697 460 gap().clearAdvertisingPayload();
rgrover1 716:11b41f651697 461 }
rgrover1 716:11b41f651697 462
rgrover1 716:11b41f651697 463 /**
rgrover1 716:11b41f651697 464 * This API is *deprecated* and resolves to a no-operation. It is left here
rgrover1 716:11b41f651697 465 * to allow older code to compile. Please avoid using this API in new code.
rgrover1 716:11b41f651697 466 * This API will be dropped in a future release.
rgrover1 716:11b41f651697 467 *
rgrover1 716:11b41f651697 468 * Formerly, it would be used to dynamically reset the accumulated advertising
rgrover1 716:11b41f651697 469 * payload and scanResponse; to do this, the application would clear and re-
rgrover1 716:11b41f651697 470 * accumulate a new advertising payload (and scanResponse) before using this
rgrover1 716:11b41f651697 471 * API. Updates to the underlying advertisement payload now happen
rgrover1 716:11b41f651697 472 * implicitly.
rgrover1 716:11b41f651697 473 */
rgrover1 716:11b41f651697 474 ble_error_t setAdvertisingPayload(void) {
rgrover1 716:11b41f651697 475 return BLE_ERROR_NONE;
rgrover1 716:11b41f651697 476 }
rgrover1 716:11b41f651697 477
rgrover1 716:11b41f651697 478 /**
rgrover1 716:11b41f651697 479 * Accumulate a variable length byte-stream as an AD structure in the
rgrover1 716:11b41f651697 480 * scanResponse payload.
rgrover1 716:11b41f651697 481 *
rgrover1 716:11b41f651697 482 * @param[in] type The type which describes the variable length data.
rgrover1 716:11b41f651697 483 * @param[in] data data bytes.
rgrover1 716:11b41f651697 484 * @param[in] len length of data.
rgrover1 716:11b41f651697 485 *
rgrover1 716:11b41f651697 486 * @note: This API is now *deprecated* and will be dropped in the future.
rgrover1 716:11b41f651697 487 * You should use the parallel API from Gap directly. A former call to
rgrover1 716:11b41f651697 488 * ble.accumulateScanResponse(...) should be replaced with
rgrover1 716:11b41f651697 489 * ble.gap().accumulateScanResponse(...).
rgrover1 716:11b41f651697 490 */
rgrover1 716:11b41f651697 491 ble_error_t accumulateScanResponse(GapAdvertisingData::DataType type, const uint8_t *data, uint8_t len) {
rgrover1 716:11b41f651697 492 return gap().accumulateScanResponse(type, data, len);
rgrover1 716:11b41f651697 493 }
rgrover1 716:11b41f651697 494
rgrover1 716:11b41f651697 495 /**
rgrover1 716:11b41f651697 496 * Reset any scan response prepared from prior calls to
rgrover1 716:11b41f651697 497 * accumulateScanResponse().
rgrover1 716:11b41f651697 498 *
rgrover1 716:11b41f651697 499 * @note: This API is now *deprecated* and will be dropped in the future.
rgrover1 716:11b41f651697 500 * You should use the parallel API from Gap directly. A former call to
rgrover1 716:11b41f651697 501 * ble.clearScanResponse(...) should be replaced with
rgrover1 716:11b41f651697 502 * ble.gap().clearScanResponse(...).
rgrover1 716:11b41f651697 503 */
rgrover1 716:11b41f651697 504 void clearScanResponse(void) {
rgrover1 716:11b41f651697 505 gap().clearScanResponse();
rgrover1 716:11b41f651697 506 }
rgrover1 716:11b41f651697 507
rgrover1 716:11b41f651697 508 /**
rgrover1 716:11b41f651697 509 * Start advertising.
rgrover1 716:11b41f651697 510 *
rgrover1 716:11b41f651697 511 * @note: This API is now *deprecated* and will be dropped in the future.
rgrover1 716:11b41f651697 512 * You should use the parallel API from Gap directly. A former call to
rgrover1 716:11b41f651697 513 * ble.startAdvertising(...) should be replaced with
rgrover1 716:11b41f651697 514 * ble.gap().startAdvertising(...).
rgrover1 716:11b41f651697 515 */
rgrover1 716:11b41f651697 516 ble_error_t startAdvertising(void) {
rgrover1 716:11b41f651697 517 return gap().startAdvertising();
rgrover1 716:11b41f651697 518 }
rgrover1 716:11b41f651697 519
rgrover1 716:11b41f651697 520 /**
rgrover1 716:11b41f651697 521 * Stop advertising.
rgrover1 716:11b41f651697 522 *
rgrover1 716:11b41f651697 523 * @note: This API is now *deprecated* and will be dropped in the future.
rgrover1 716:11b41f651697 524 * You should use the parallel API from Gap directly. A former call to
rgrover1 716:11b41f651697 525 * ble.stopAdvertising(...) should be replaced with
rgrover1 716:11b41f651697 526 * ble.gap().stopAdvertising(...).
rgrover1 716:11b41f651697 527 */
rgrover1 716:11b41f651697 528 ble_error_t stopAdvertising(void) {
rgrover1 716:11b41f651697 529 return gap().stopAdvertising();
rgrover1 716:11b41f651697 530 }
rgrover1 716:11b41f651697 531
rgrover1 716:11b41f651697 532 /**
rgrover1 716:11b41f651697 533 * Setup parameters for GAP scanning--i.e. observer mode.
rgrover1 716:11b41f651697 534 * @param[in] interval
rgrover1 716:11b41f651697 535 * Scan interval (in milliseconds) [valid values lie between 2.5ms and 10.24s].
rgrover1 716:11b41f651697 536 * @param[in] window
rgrover1 716:11b41f651697 537 * Scan Window (in milliseconds) [valid values lie between 2.5ms and 10.24s].
rgrover1 716:11b41f651697 538 * @param[in] timeout
rgrover1 716:11b41f651697 539 * Scan timeout (in seconds) between 0x0001 and 0xFFFF, 0x0000 disables timeout.
rgrover1 716:11b41f651697 540 * @param[in] activeScanning
rgrover1 716:11b41f651697 541 * Set to True if active-scanning is required. This is used to fetch the
rgrover1 716:11b41f651697 542 * scan response from a peer if possible.
rgrover1 716:11b41f651697 543 *
rgrover1 716:11b41f651697 544 * The scanning window divided by the interval determines the duty cycle for
rgrover1 716:11b41f651697 545 * scanning. For example, if the interval is 100ms and the window is 10ms,
rgrover1 716:11b41f651697 546 * then the controller will scan for 10 percent of the time. It is possible
rgrover1 716:11b41f651697 547 * to have the interval and window set to the same value. In this case,
rgrover1 716:11b41f651697 548 * scanning is continuous, with a change of scanning frequency once every
rgrover1 716:11b41f651697 549 * interval.
rgrover1 716:11b41f651697 550 *
rgrover1 716:11b41f651697 551 * Once the scanning parameters have been configured, scanning can be
rgrover1 716:11b41f651697 552 * enabled by using startScan().
rgrover1 716:11b41f651697 553 *
rgrover1 716:11b41f651697 554 * @Note: The scan interval and window are recommendations to the BLE stack.
rgrover1 716:11b41f651697 555 *
rgrover1 716:11b41f651697 556 * @note: This API is now *deprecated* and will be dropped in the future.
rgrover1 716:11b41f651697 557 * You should use the parallel API from Gap directly. A former call to
rgrover1 716:11b41f651697 558 * ble.setScanParams(...) should be replaced with
rgrover1 716:11b41f651697 559 * ble.gap().setScanParams(...).
rgrover1 716:11b41f651697 560 */
rgrover1 716:11b41f651697 561 ble_error_t setScanParams(uint16_t interval = GapScanningParams::SCAN_INTERVAL_MAX,
rgrover1 716:11b41f651697 562 uint16_t window = GapScanningParams::SCAN_WINDOW_MAX,
rgrover1 716:11b41f651697 563 uint16_t timeout = 0,
rgrover1 716:11b41f651697 564 bool activeScanning = false) {
rgrover1 716:11b41f651697 565 return gap().setScanParams(interval, window, timeout, activeScanning);
rgrover1 716:11b41f651697 566 }
rgrover1 716:11b41f651697 567
rgrover1 716:11b41f651697 568 /**
rgrover1 716:11b41f651697 569 * Setup the scanInterval parameter for GAP scanning--i.e. observer mode.
rgrover1 716:11b41f651697 570 * @param[in] interval
rgrover1 716:11b41f651697 571 * Scan interval (in milliseconds) [valid values lie between 2.5ms and 10.24s].
rgrover1 716:11b41f651697 572 *
rgrover1 716:11b41f651697 573 * The scanning window divided by the interval determines the duty cycle for
rgrover1 716:11b41f651697 574 * scanning. For example, if the interval is 100ms and the window is 10ms,
rgrover1 716:11b41f651697 575 * then the controller will scan for 10 percent of the time. It is possible
rgrover1 716:11b41f651697 576 * to have the interval and window set to the same value. In this case,
rgrover1 716:11b41f651697 577 * scanning is continuous, with a change of scanning frequency once every
rgrover1 716:11b41f651697 578 * interval.
rgrover1 716:11b41f651697 579 *
rgrover1 716:11b41f651697 580 * Once the scanning parameters have been configured, scanning can be
rgrover1 716:11b41f651697 581 * enabled by using startScan().
rgrover1 716:11b41f651697 582 *
rgrover1 716:11b41f651697 583 * @note: This API is now *deprecated* and will be dropped in the future.
rgrover1 716:11b41f651697 584 * You should use the parallel API from Gap directly. A former call to
rgrover1 716:11b41f651697 585 * ble.setScanInterval(interval) should be replaced with
rgrover1 716:11b41f651697 586 * ble.gap().setScanInterval(interval).
rgrover1 716:11b41f651697 587 */
rgrover1 716:11b41f651697 588 ble_error_t setScanInterval(uint16_t interval) {
rgrover1 716:11b41f651697 589 return gap().setScanInterval(interval);
rgrover1 716:11b41f651697 590 }
rgrover1 716:11b41f651697 591
rgrover1 716:11b41f651697 592 /**
rgrover1 716:11b41f651697 593 * Setup the scanWindow parameter for GAP scanning--i.e. observer mode.
rgrover1 716:11b41f651697 594 * @param[in] window
rgrover1 716:11b41f651697 595 * Scan Window (in milliseconds) [valid values lie between 2.5ms and 10.24s].
rgrover1 716:11b41f651697 596 *
rgrover1 716:11b41f651697 597 * The scanning window divided by the interval determines the duty cycle for
rgrover1 716:11b41f651697 598 * scanning. For example, if the interval is 100ms and the window is 10ms,
rgrover1 716:11b41f651697 599 * then the controller will scan for 10 percent of the time. It is possible
rgrover1 716:11b41f651697 600 * to have the interval and window set to the same value. In this case,
rgrover1 716:11b41f651697 601 * scanning is continuous, with a change of scanning frequency once every
rgrover1 716:11b41f651697 602 * interval.
rgrover1 716:11b41f651697 603 *
rgrover1 716:11b41f651697 604 * Once the scanning parameters have been configured, scanning can be
rgrover1 716:11b41f651697 605 * enabled by using startScan().
rgrover1 716:11b41f651697 606 *
rgrover1 716:11b41f651697 607 * @note: This API is now *deprecated* and will be dropped in the future.
rgrover1 716:11b41f651697 608 * You should use the parallel API from Gap directly. A former call to
rgrover1 716:11b41f651697 609 * ble.setScanWindow(window) should be replaced with
rgrover1 716:11b41f651697 610 * ble.gap().setScanWindow(window).
rgrover1 716:11b41f651697 611 */
rgrover1 716:11b41f651697 612 ble_error_t setScanWindow(uint16_t window) {
rgrover1 716:11b41f651697 613 return gap().setScanWindow(window);
rgrover1 716:11b41f651697 614 }
rgrover1 716:11b41f651697 615
rgrover1 716:11b41f651697 616 /**
rgrover1 716:11b41f651697 617 * Setup parameters for GAP scanning--i.e. observer mode.
rgrover1 716:11b41f651697 618 * @param[in] timeout
rgrover1 716:11b41f651697 619 * Scan timeout (in seconds) between 0x0001 and 0xFFFF, 0x0000 disables timeout.
rgrover1 716:11b41f651697 620 *
rgrover1 716:11b41f651697 621 * The scanning window divided by the interval determines the duty cycle for
rgrover1 716:11b41f651697 622 * scanning. For example, if the interval is 100ms and the window is 10ms,
rgrover1 716:11b41f651697 623 * then the controller will scan for 10 percent of the time. It is possible
rgrover1 716:11b41f651697 624 * to have the interval and window set to the same value. In this case,
rgrover1 716:11b41f651697 625 * scanning is continuous, with a change of scanning frequency once every
rgrover1 716:11b41f651697 626 * interval.
rgrover1 716:11b41f651697 627 *
rgrover1 716:11b41f651697 628 * Once the scanning parameters have been configured, scanning can be
rgrover1 716:11b41f651697 629 * enabled by using startScan().
rgrover1 716:11b41f651697 630 *
rgrover1 716:11b41f651697 631 * @Note: The scan interval and window are recommendations to the BLE stack.
rgrover1 716:11b41f651697 632 *
rgrover1 716:11b41f651697 633 * @note: This API is now *deprecated* and will be dropped in the future.
rgrover1 716:11b41f651697 634 * You should use the parallel API from Gap directly. A former call to
rgrover1 716:11b41f651697 635 * ble.setScanTimeout(...) should be replaced with
rgrover1 716:11b41f651697 636 * ble.gap().setScanTimeout(...).
rgrover1 716:11b41f651697 637 */
rgrover1 716:11b41f651697 638 ble_error_t setScanTimeout(uint16_t timeout) {
rgrover1 716:11b41f651697 639 return gap().setScanTimeout(timeout);
rgrover1 716:11b41f651697 640 }
rgrover1 716:11b41f651697 641
rgrover1 716:11b41f651697 642 /**
rgrover1 716:11b41f651697 643 * Setup parameters for GAP scanning--i.e. observer mode.
rgrover1 716:11b41f651697 644 * @param[in] activeScanning
rgrover1 716:11b41f651697 645 * Set to True if active-scanning is required. This is used to fetch the
rgrover1 716:11b41f651697 646 * scan response from a peer if possible.
rgrover1 716:11b41f651697 647 *
rgrover1 716:11b41f651697 648 * Once the scanning parameters have been configured, scanning can be
rgrover1 716:11b41f651697 649 * enabled by using startScan().
rgrover1 716:11b41f651697 650 *
rgrover1 716:11b41f651697 651 * @note: This API is now *deprecated* and will be dropped in the future.
rgrover1 716:11b41f651697 652 * You should use the parallel API from Gap directly. A former call to
rgrover1 716:11b41f651697 653 * ble.setActiveScan(...) should be replaced with
rgrover1 716:11b41f651697 654 * ble.gap().setActiveScanning(...).
rgrover1 716:11b41f651697 655 */
rgrover1 716:11b41f651697 656 void setActiveScan(bool activeScanning) {
rgrover1 716:11b41f651697 657 gap().setActiveScanning(activeScanning);
rgrover1 716:11b41f651697 658 }
rgrover1 716:11b41f651697 659
rgrover1 716:11b41f651697 660 /**
rgrover1 716:11b41f651697 661 * Start scanning (Observer Procedure) based on the parameters currently in
rgrover1 716:11b41f651697 662 * effect.
rgrover1 716:11b41f651697 663 *
rgrover1 716:11b41f651697 664 * @param[in] callback
rgrover1 716:11b41f651697 665 * The application specific callback to be invoked upon
rgrover1 716:11b41f651697 666 * receiving every advertisement report. This can be passed in
rgrover1 716:11b41f651697 667 * as NULL, in which case scanning may not be enabled at all.
rgrover1 716:11b41f651697 668 *
rgrover1 716:11b41f651697 669 * @note: This API is now *deprecated* and will be dropped in the future.
rgrover1 716:11b41f651697 670 * You should use the parallel API from Gap directly. A former call to
rgrover1 716:11b41f651697 671 * ble.startScan(callback) should be replaced with
rgrover1 716:11b41f651697 672 * ble.gap().startScan(callback).
rgrover1 716:11b41f651697 673 */
rgrover1 716:11b41f651697 674 ble_error_t startScan(void (*callback)(const Gap::AdvertisementCallbackParams_t *params)) {
rgrover1 716:11b41f651697 675 return gap().startScan(callback);
rgrover1 716:11b41f651697 676 }
rgrover1 716:11b41f651697 677
rgrover1 716:11b41f651697 678 /**
rgrover1 716:11b41f651697 679 * Same as above, but this takes an (object, method) pair for a callback.
rgrover1 716:11b41f651697 680 *
rgrover1 716:11b41f651697 681 * @note: This API is now *deprecated* and will be dropped in the future.
rgrover1 716:11b41f651697 682 * You should use the parallel API from Gap directly. A former call to
rgrover1 716:11b41f651697 683 * ble.startScan(callback) should be replaced with
rgrover1 716:11b41f651697 684 * ble.gap().startScan(object, callback).
rgrover1 716:11b41f651697 685 */
rgrover1 716:11b41f651697 686 template<typename T>
rgrover1 716:11b41f651697 687 ble_error_t startScan(T *object, void (T::*memberCallback)(const Gap::AdvertisementCallbackParams_t *params));
rgrover1 716:11b41f651697 688
rgrover1 716:11b41f651697 689 /**
rgrover1 716:11b41f651697 690 * Stop scanning. The current scanning parameters remain in effect.
rgrover1 716:11b41f651697 691 *
rgrover1 716:11b41f651697 692 * @retval BLE_ERROR_NONE if successfully stopped scanning procedure.
rgrover1 716:11b41f651697 693 *
rgrover1 716:11b41f651697 694 * @note: This API is now *deprecated* and will be dropped in the future.
rgrover1 716:11b41f651697 695 * You should use the parallel API from Gap directly. A former call to
rgrover1 716:11b41f651697 696 * ble.stopScan() should be replaced with
rgrover1 716:11b41f651697 697 * ble.gap().stopScan().
rgrover1 716:11b41f651697 698 */
rgrover1 716:11b41f651697 699 ble_error_t stopScan(void) {
rgrover1 716:11b41f651697 700 return gap().stopScan();
rgrover1 716:11b41f651697 701 }
rgrover1 716:11b41f651697 702
rgrover1 716:11b41f651697 703 /**
rgrover1 716:11b41f651697 704 * Create a connection (GAP Link Establishment).
rgrover1 716:11b41f651697 705 * @param peerAddr
rgrover1 716:11b41f651697 706 * 48-bit address, LSB format.
rgrover1 716:11b41f651697 707 * @param peerAddrType
rgrover1 716:11b41f651697 708 * Address type of the peer.
rgrover1 716:11b41f651697 709 * @param connectionParams
rgrover1 716:11b41f651697 710 * Connection parameters.
rgrover1 716:11b41f651697 711 * @param scanParams
rgrover1 716:11b41f651697 712 * Paramters to be used while scanning for the peer.
rgrover1 716:11b41f651697 713 * @return BLE_ERROR_NONE if connection establishment procedure is started
rgrover1 716:11b41f651697 714 * successfully. The onConnection callback (if set) will be invoked upon
rgrover1 716:11b41f651697 715 * a connection event.
rgrover1 716:11b41f651697 716 *
rgrover1 716:11b41f651697 717 * @note: This API is now *deprecated* and will be dropped in the future.
rgrover1 716:11b41f651697 718 * You should use the parallel API from Gap directly. A former call to
rgrover1 716:11b41f651697 719 * ble.connect(...) should be replaced with
rgrover1 716:11b41f651697 720 * ble.gap().connect(...).
rgrover1 716:11b41f651697 721 */
rgrover1 716:11b41f651697 722 ble_error_t connect(const Gap::Address_t peerAddr,
rgrover1 716:11b41f651697 723 Gap::AddressType_t peerAddrType = Gap::ADDR_TYPE_RANDOM_STATIC,
rgrover1 716:11b41f651697 724 const Gap::ConnectionParams_t *connectionParams = NULL,
rgrover1 716:11b41f651697 725 const GapScanningParams *scanParams = NULL) {
rgrover1 716:11b41f651697 726 return gap().connect(peerAddr, peerAddrType, connectionParams, scanParams);
rgrover1 716:11b41f651697 727 }
rgrover1 716:11b41f651697 728
rgrover1 716:11b41f651697 729 /**
rgrover1 716:11b41f651697 730 * This call initiates the disconnection procedure, and its completion will
rgrover1 716:11b41f651697 731 * be communicated to the application with an invocation of the
rgrover1 716:11b41f651697 732 * onDisconnection callback.
rgrover1 716:11b41f651697 733 *
rgrover1 716:11b41f651697 734 * @param[in] connectionHandle
rgrover1 716:11b41f651697 735 * @param[in] reason
rgrover1 716:11b41f651697 736 * The reason for disconnection to be sent back to the peer.
rgrover1 716:11b41f651697 737 */
rgrover1 716:11b41f651697 738 ble_error_t disconnect(Gap::Handle_t connectionHandle, Gap::DisconnectionReason_t reason) {
rgrover1 716:11b41f651697 739 return gap().disconnect(connectionHandle, reason);
rgrover1 716:11b41f651697 740 }
rgrover1 716:11b41f651697 741
rgrover1 716:11b41f651697 742 /**
rgrover1 716:11b41f651697 743 * This call initiates the disconnection procedure, and its completion will
rgrover1 716:11b41f651697 744 * be communicated to the application with an invocation of the
rgrover1 716:11b41f651697 745 * onDisconnection callback.
rgrover1 716:11b41f651697 746 *
rgrover1 716:11b41f651697 747 * @param reason
rgrover1 716:11b41f651697 748 * The reason for disconnection to be sent back to the peer.
rgrover1 716:11b41f651697 749 *
rgrover1 716:11b41f651697 750 * @note: This API is now *deprecated* and will be dropped in the future.
rgrover1 716:11b41f651697 751 * You should use the parallel API from Gap directly. A former call to
rgrover1 716:11b41f651697 752 * ble.disconnect(reason) should be replaced with
rgrover1 716:11b41f651697 753 * ble.gap().disconnect(reason).
rgrover1 716:11b41f651697 754 *
rgrover1 716:11b41f651697 755 * @note: this version of disconnect() doesn't take a connection handle. It
rgrover1 716:11b41f651697 756 * will work reliably only for stacks which are limited to a single
rgrover1 716:11b41f651697 757 * connection. This API should be considered *deprecated* in favour of the
rgrover1 716:11b41f651697 758 * alternative which takes a connection handle. It will be dropped in the future.
rgrover1 716:11b41f651697 759 */
rgrover1 716:11b41f651697 760 ble_error_t disconnect(Gap::DisconnectionReason_t reason) {
rgrover1 716:11b41f651697 761 return gap().disconnect(reason);
rgrover1 716:11b41f651697 762 }
rgrover1 716:11b41f651697 763
rgrover1 716:11b41f651697 764 /**
rgrover1 716:11b41f651697 765 * Returns the current GAP state of the device using a bitmask which
rgrover1 716:11b41f651697 766 * describes whether the device is advertising and/or connected.
rgrover1 716:11b41f651697 767 *
rgrover1 716:11b41f651697 768 * @note: This API is now *deprecated* and will be dropped in the future.
rgrover1 716:11b41f651697 769 * You should use the parallel API from Gap directly. A former call to
rgrover1 716:11b41f651697 770 * ble.getGapState() should be replaced with
rgrover1 716:11b41f651697 771 * ble.gap().getState().
rgrover1 716:11b41f651697 772 */
rgrover1 716:11b41f651697 773 Gap::GapState_t getGapState(void) const {
rgrover1 716:11b41f651697 774 return gap().getState();
rgrover1 716:11b41f651697 775 }
rgrover1 716:11b41f651697 776
rgrover1 716:11b41f651697 777 /**
rgrover1 716:11b41f651697 778 * Get the GAP peripheral preferred connection parameters. These are the
rgrover1 716:11b41f651697 779 * defaults that the peripheral would like to have in a connection. The
rgrover1 716:11b41f651697 780 * choice of the connection parameters is eventually up to the central.
rgrover1 716:11b41f651697 781 *
rgrover1 716:11b41f651697 782 * @param[out] params
rgrover1 716:11b41f651697 783 * The structure where the parameters will be stored. Memory
rgrover1 716:11b41f651697 784 * for this is owned by the caller.
rgrover1 716:11b41f651697 785 *
rgrover1 716:11b41f651697 786 * @return BLE_ERROR_NONE if the parameters were successfully filled into
rgrover1 716:11b41f651697 787 * the given structure pointed to by params.
rgrover1 716:11b41f651697 788 *
rgrover1 716:11b41f651697 789 * @note: This API is now *deprecated* and will be dropped in the future.
rgrover1 716:11b41f651697 790 * You should use the parallel API from Gap directly. A former call to
rgrover1 716:11b41f651697 791 * ble.getPreferredConnectionParams() should be replaced with
rgrover1 716:11b41f651697 792 * ble.gap().getPreferredConnectionParams().
rgrover1 716:11b41f651697 793 */
rgrover1 716:11b41f651697 794 ble_error_t getPreferredConnectionParams(Gap::ConnectionParams_t *params) {
rgrover1 716:11b41f651697 795 return gap().getPreferredConnectionParams(params);
rgrover1 716:11b41f651697 796 }
rgrover1 716:11b41f651697 797
rgrover1 716:11b41f651697 798 /**
rgrover1 716:11b41f651697 799 * Set the GAP peripheral preferred connection parameters. These are the
rgrover1 716:11b41f651697 800 * defaults that the peripheral would like to have in a connection. The
rgrover1 716:11b41f651697 801 * choice of the connection parameters is eventually up to the central.
rgrover1 716:11b41f651697 802 *
rgrover1 716:11b41f651697 803 * @param[in] params
rgrover1 716:11b41f651697 804 * The structure containing the desired parameters.
rgrover1 716:11b41f651697 805 *
rgrover1 716:11b41f651697 806 * @note: This API is now *deprecated* and will be dropped in the future.
rgrover1 716:11b41f651697 807 * You should use the parallel API from Gap directly. A former call to
rgrover1 716:11b41f651697 808 * ble.setPreferredConnectionParams() should be replaced with
rgrover1 716:11b41f651697 809 * ble.gap().setPreferredConnectionParams().
rgrover1 716:11b41f651697 810 */
rgrover1 716:11b41f651697 811 ble_error_t setPreferredConnectionParams(const Gap::ConnectionParams_t *params) {
rgrover1 716:11b41f651697 812 return gap().setPreferredConnectionParams(params);
rgrover1 716:11b41f651697 813 }
rgrover1 716:11b41f651697 814
rgrover1 716:11b41f651697 815 /**
rgrover1 716:11b41f651697 816 * Update connection parameters while in the peripheral role.
rgrover1 716:11b41f651697 817 * @details In the peripheral role, this will send the corresponding L2CAP request to the connected peer and wait for
rgrover1 716:11b41f651697 818 * the central to perform the procedure.
rgrover1 716:11b41f651697 819 * @param[in] handle
rgrover1 716:11b41f651697 820 * Connection Handle
rgrover1 716:11b41f651697 821 * @param[in] params
rgrover1 716:11b41f651697 822 * Pointer to desired connection parameters. If NULL is provided on a peripheral role,
rgrover1 716:11b41f651697 823 * the parameters in the PPCP characteristic of the GAP service will be used instead.
rgrover1 716:11b41f651697 824 *
rgrover1 716:11b41f651697 825 * @note: This API is now *deprecated* and will be dropped in the future.
rgrover1 716:11b41f651697 826 * You should use the parallel API from Gap directly. A former call to
rgrover1 716:11b41f651697 827 * ble.updateConnectionParams() should be replaced with
rgrover1 716:11b41f651697 828 * ble.gap().updateConnectionParams().
rgrover1 716:11b41f651697 829 */
rgrover1 716:11b41f651697 830 ble_error_t updateConnectionParams(Gap::Handle_t handle, const Gap::ConnectionParams_t *params) {
rgrover1 716:11b41f651697 831 return gap().updateConnectionParams(handle, params);
rgrover1 716:11b41f651697 832 }
rgrover1 716:11b41f651697 833
rgrover1 716:11b41f651697 834 /**
rgrover1 716:11b41f651697 835 * Set the device name characteristic in the GAP service.
rgrover1 716:11b41f651697 836 * @param[in] deviceName
rgrover1 716:11b41f651697 837 * The new value for the device-name. This is a UTF-8 encoded, <b>NULL-terminated</b> string.
rgrover1 716:11b41f651697 838 *
rgrover1 716:11b41f651697 839 * @note: This API is now *deprecated* and will be dropped in the future.
rgrover1 716:11b41f651697 840 * You should use the parallel API from Gap directly. A former call to
rgrover1 716:11b41f651697 841 * ble.setDeviceName() should be replaced with
rgrover1 716:11b41f651697 842 * ble.gap().setDeviceName().
rgrover1 716:11b41f651697 843 */
rgrover1 716:11b41f651697 844 ble_error_t setDeviceName(const uint8_t *deviceName) {
rgrover1 716:11b41f651697 845 return gap().setDeviceName(deviceName);
rgrover1 716:11b41f651697 846 }
rgrover1 716:11b41f651697 847
rgrover1 716:11b41f651697 848 /**
rgrover1 716:11b41f651697 849 * Get the value of the device name characteristic in the GAP service.
rgrover1 716:11b41f651697 850 * @param[out] deviceName
rgrover1 716:11b41f651697 851 * Pointer to an empty buffer where the UTF-8 *non NULL-
rgrover1 716:11b41f651697 852 * terminated* string will be placed. Set this
rgrover1 716:11b41f651697 853 * value to NULL in order to obtain the deviceName-length
rgrover1 716:11b41f651697 854 * from the 'length' parameter.
rgrover1 716:11b41f651697 855 *
rgrover1 716:11b41f651697 856 * @param[in/out] lengthP
rgrover1 716:11b41f651697 857 * (on input) Length of the buffer pointed to by deviceName;
rgrover1 716:11b41f651697 858 * (on output) the complete device name length (without the
rgrover1 716:11b41f651697 859 * null terminator).
rgrover1 716:11b41f651697 860 *
rgrover1 716:11b41f651697 861 * @note If the device name is longer than the size of the supplied buffer,
rgrover1 716:11b41f651697 862 * length will return the complete device name length, and not the
rgrover1 716:11b41f651697 863 * number of bytes actually returned in deviceName. The application may
rgrover1 716:11b41f651697 864 * use this information to retry with a suitable buffer size.
rgrover1 716:11b41f651697 865 *
rgrover1 716:11b41f651697 866 * @note: This API is now *deprecated* and will be dropped in the future.
rgrover1 716:11b41f651697 867 * You should use the parallel API from Gap directly. A former call to
rgrover1 716:11b41f651697 868 * ble.getDeviceName() should be replaced with
rgrover1 716:11b41f651697 869 * ble.gap().getDeviceName().
rgrover1 716:11b41f651697 870 */
rgrover1 716:11b41f651697 871 ble_error_t getDeviceName(uint8_t *deviceName, unsigned *lengthP) {
rgrover1 716:11b41f651697 872 return gap().getDeviceName(deviceName, lengthP);
rgrover1 716:11b41f651697 873 }
rgrover1 716:11b41f651697 874
rgrover1 716:11b41f651697 875 /**
rgrover1 716:11b41f651697 876 * Set the appearance characteristic in the GAP service.
rgrover1 716:11b41f651697 877 * @param[in] appearance
rgrover1 716:11b41f651697 878 * The new value for the device-appearance.
rgrover1 716:11b41f651697 879 *
rgrover1 716:11b41f651697 880 * @note: This API is now *deprecated* and will be dropped in the future.
rgrover1 716:11b41f651697 881 * You should use the parallel API from Gap directly. A former call to
rgrover1 716:11b41f651697 882 * ble.setAppearance() should be replaced with
rgrover1 716:11b41f651697 883 * ble.gap().setAppearance().
rgrover1 716:11b41f651697 884 */
rgrover1 716:11b41f651697 885 ble_error_t setAppearance(GapAdvertisingData::Appearance appearance) {
rgrover1 716:11b41f651697 886 return gap().setAppearance(appearance);
rgrover1 716:11b41f651697 887 }
rgrover1 716:11b41f651697 888
rgrover1 716:11b41f651697 889 /**
rgrover1 716:11b41f651697 890 * Get the appearance characteristic in the GAP service.
rgrover1 716:11b41f651697 891 * @param[out] appearance
rgrover1 716:11b41f651697 892 * The new value for the device-appearance.
rgrover1 716:11b41f651697 893 *
rgrover1 716:11b41f651697 894 * @note: This API is now *deprecated* and will be dropped in the future.
rgrover1 716:11b41f651697 895 * You should use the parallel API from Gap directly. A former call to
rgrover1 716:11b41f651697 896 * ble.getAppearance() should be replaced with
rgrover1 716:11b41f651697 897 * ble.gap().getAppearance().
rgrover1 716:11b41f651697 898 */
rgrover1 716:11b41f651697 899 ble_error_t getAppearance(GapAdvertisingData::Appearance *appearanceP) {
rgrover1 716:11b41f651697 900 return gap().getAppearance(appearanceP);
rgrover1 716:11b41f651697 901 }
rgrover1 716:11b41f651697 902
rgrover1 716:11b41f651697 903 /**
rgrover1 716:11b41f651697 904 * Set the radio's transmit power.
rgrover1 716:11b41f651697 905 * @param[in] txPower Radio transmit power in dBm.
rgrover1 716:11b41f651697 906 *
rgrover1 716:11b41f651697 907 * @note: This API is now *deprecated* and will be dropped in the future.
rgrover1 716:11b41f651697 908 * You should use the parallel API from Gap directly. A former call to
rgrover1 716:11b41f651697 909 * ble.setTxPower() should be replaced with
rgrover1 716:11b41f651697 910 * ble.gap().setTxPower().
rgrover1 716:11b41f651697 911 */
rgrover1 716:11b41f651697 912 ble_error_t setTxPower(int8_t txPower) {
rgrover1 716:11b41f651697 913 return gap().setTxPower(txPower);
rgrover1 716:11b41f651697 914 }
rgrover1 716:11b41f651697 915
rgrover1 716:11b41f651697 916 /**
rgrover1 716:11b41f651697 917 * Query the underlying stack for permitted arguments for setTxPower().
rgrover1 716:11b41f651697 918 *
rgrover1 716:11b41f651697 919 * @param[out] valueArrayPP
rgrover1 716:11b41f651697 920 * Out parameter to receive the immutable array of Tx values.
rgrover1 716:11b41f651697 921 * @param[out] countP
rgrover1 716:11b41f651697 922 * Out parameter to receive the array's size.
rgrover1 716:11b41f651697 923 *
rgrover1 716:11b41f651697 924 * @note: This API is now *deprecated* and will be dropped in the future.
rgrover1 716:11b41f651697 925 * You should use the parallel API from Gap directly. A former call to
rgrover1 716:11b41f651697 926 * ble.getPermittedTxPowerValues() should be replaced with
rgrover1 716:11b41f651697 927 * ble.gap().getPermittedTxPowerValues().
rgrover1 716:11b41f651697 928 */
rgrover1 716:11b41f651697 929 void getPermittedTxPowerValues(const int8_t **valueArrayPP, size_t *countP) {
rgrover1 716:11b41f651697 930 gap().getPermittedTxPowerValues(valueArrayPP, countP);
rgrover1 716:11b41f651697 931 }
rgrover1 716:11b41f651697 932
rgrover1 716:11b41f651697 933 /**
rgrover1 716:11b41f651697 934 * Add a service declaration to the local server ATT table. Also add the
rgrover1 716:11b41f651697 935 * characteristics contained within.
rgrover1 716:11b41f651697 936 *
rgrover1 716:11b41f651697 937 * @note: This API is now *deprecated* and will be dropped in the future.
rgrover1 716:11b41f651697 938 * You should use the parallel API from GattServer directly. A former call
rgrover1 716:11b41f651697 939 * to ble.addService() should be replaced with
rgrover1 716:11b41f651697 940 * ble.gattServer().addService().
rgrover1 716:11b41f651697 941 */
rgrover1 716:11b41f651697 942 ble_error_t addService(GattService &service) {
rgrover1 716:11b41f651697 943 return gattServer().addService(service);
rgrover1 716:11b41f651697 944 }
rgrover1 716:11b41f651697 945
rgrover1 716:11b41f651697 946 /**
rgrover1 716:11b41f651697 947 * Read the value of a characteristic from the local GattServer
rgrover1 716:11b41f651697 948 * @param[in] attributeHandle
rgrover1 716:11b41f651697 949 * Attribute handle for the value attribute of the characteristic.
rgrover1 716:11b41f651697 950 * @param[out] buffer
rgrover1 716:11b41f651697 951 * A buffer to hold the value being read.
rgrover1 716:11b41f651697 952 * @param[in/out] lengthP
rgrover1 716:11b41f651697 953 * Length of the buffer being supplied. If the attribute
rgrover1 716:11b41f651697 954 * value is longer than the size of the supplied buffer,
rgrover1 716:11b41f651697 955 * this variable will hold upon return the total attribute value length
rgrover1 716:11b41f651697 956 * (excluding offset). The application may use this
rgrover1 716:11b41f651697 957 * information to allocate a suitable buffer size.
rgrover1 716:11b41f651697 958 *
rgrover1 716:11b41f651697 959 * @return BLE_ERROR_NONE if a value was read successfully into the buffer.
rgrover1 716:11b41f651697 960 *
rgrover1 716:11b41f651697 961 * @note: This API is now *deprecated* and will be dropped in the future.
rgrover1 716:11b41f651697 962 * You should use the parallel API from GattServer directly. A former call
rgrover1 716:11b41f651697 963 * to ble.readCharacteristicValue() should be replaced with
rgrover1 716:11b41f651697 964 * ble.gattServer().read().
rgrover1 716:11b41f651697 965 */
rgrover1 716:11b41f651697 966 ble_error_t readCharacteristicValue(GattAttribute::Handle_t attributeHandle, uint8_t *buffer, uint16_t *lengthP) {
rgrover1 716:11b41f651697 967 return gattServer().read(attributeHandle, buffer, lengthP);
rgrover1 716:11b41f651697 968 }
rgrover1 716:11b41f651697 969
rgrover1 716:11b41f651697 970 /**
rgrover1 716:11b41f651697 971 * Read the value of a characteristic from the local GattServer
rgrover1 716:11b41f651697 972 * @param[in] connectionHandle
rgrover1 716:11b41f651697 973 * Connection Handle.
rgrover1 716:11b41f651697 974 * @param[in] attributeHandle
rgrover1 716:11b41f651697 975 * Attribute handle for the value attribute of the characteristic.
rgrover1 716:11b41f651697 976 * @param[out] buffer
rgrover1 716:11b41f651697 977 * A buffer to hold the value being read.
rgrover1 716:11b41f651697 978 * @param[in/out] lengthP
rgrover1 716:11b41f651697 979 * Length of the buffer being supplied. If the attribute
rgrover1 716:11b41f651697 980 * value is longer than the size of the supplied buffer,
rgrover1 716:11b41f651697 981 * this variable will hold upon return the total attribute value length
rgrover1 716:11b41f651697 982 * (excluding offset). The application may use this
rgrover1 716:11b41f651697 983 * information to allocate a suitable buffer size.
rgrover1 716:11b41f651697 984 *
rgrover1 716:11b41f651697 985 * @return BLE_ERROR_NONE if a value was read successfully into the buffer.
rgrover1 716:11b41f651697 986 *
rgrover1 716:11b41f651697 987 * @note This API is a version of above with an additional connection handle
rgrover1 716:11b41f651697 988 * parameter to allow fetches for connection-specific multivalued
rgrover1 733:718a3566b4ce 989 * attributes (such as the CCCDs).
rgrover1 716:11b41f651697 990 *
rgrover1 716:11b41f651697 991 * @note: This API is now *deprecated* and will be dropped in the future.
rgrover1 716:11b41f651697 992 * You should use the parallel API from GattServer directly. A former call
rgrover1 716:11b41f651697 993 * to ble.readCharacteristicValue() should be replaced with
rgrover1 716:11b41f651697 994 * ble.gattServer().read().
rgrover1 716:11b41f651697 995 */
rgrover1 716:11b41f651697 996 ble_error_t readCharacteristicValue(Gap::Handle_t connectionHandle, GattAttribute::Handle_t attributeHandle, uint8_t *buffer, uint16_t *lengthP) {
rgrover1 716:11b41f651697 997 return gattServer().read(connectionHandle, attributeHandle, buffer, lengthP);
rgrover1 716:11b41f651697 998 }
rgrover1 716:11b41f651697 999
rgrover1 716:11b41f651697 1000 /**
rgrover1 716:11b41f651697 1001 * Update the value of a characteristic on the local GattServer.
rgrover1 716:11b41f651697 1002 *
rgrover1 716:11b41f651697 1003 * @param[in] attributeHandle
rgrover1 716:11b41f651697 1004 * Handle for the value attribute of the Characteristic.
rgrover1 716:11b41f651697 1005 * @param[in] value
rgrover1 716:11b41f651697 1006 * A pointer to a buffer holding the new value
rgrover1 716:11b41f651697 1007 * @param[in] size
rgrover1 716:11b41f651697 1008 * Size of the new value (in bytes).
rgrover1 716:11b41f651697 1009 * @param[in] localOnly
rgrover1 716:11b41f651697 1010 * Should this update be kept on the local
rgrover1 716:11b41f651697 1011 * GattServer regardless of the state of the
rgrover1 716:11b41f651697 1012 * notify/indicate flag in the CCCD for this
rgrover1 716:11b41f651697 1013 * Characteristic? If set to true, no notification
rgrover1 716:11b41f651697 1014 * or indication is generated.
rgrover1 716:11b41f651697 1015 *
rgrover1 716:11b41f651697 1016 * @return BLE_ERROR_NONE if we have successfully set the value of the attribute.
rgrover1 716:11b41f651697 1017 *
rgrover1 716:11b41f651697 1018 * @note: This API is now *deprecated* and will be dropped in the future.
rgrover1 716:11b41f651697 1019 * You should use the parallel API from GattServer directly. A former call
rgrover1 716:11b41f651697 1020 * to ble.updateCharacteristicValue() should be replaced with
rgrover1 716:11b41f651697 1021 * ble.gattServer().write().
rgrover1 716:11b41f651697 1022 */
rgrover1 716:11b41f651697 1023 ble_error_t updateCharacteristicValue(GattAttribute::Handle_t attributeHandle,
rgrover1 716:11b41f651697 1024 const uint8_t *value,
rgrover1 716:11b41f651697 1025 uint16_t size,
rgrover1 716:11b41f651697 1026 bool localOnly = false) {
rgrover1 716:11b41f651697 1027 return gattServer().write(attributeHandle, value, size, localOnly);
rgrover1 716:11b41f651697 1028 }
rgrover1 716:11b41f651697 1029
rgrover1 716:11b41f651697 1030 /**
rgrover1 716:11b41f651697 1031 * Update the value of a characteristic on the local GattServer. A version
rgrover1 716:11b41f651697 1032 * of the same as above with connection handle parameter to allow updates
rgrover1 733:718a3566b4ce 1033 * for connection-specific multivalued attributes (such as the CCCDs).
rgrover1 716:11b41f651697 1034 *
rgrover1 716:11b41f651697 1035 * @param[in] connectionHandle
rgrover1 716:11b41f651697 1036 * Connection Handle.
rgrover1 716:11b41f651697 1037 * @param[in] attributeHandle
rgrover1 716:11b41f651697 1038 * Handle for the value attribute of the Characteristic.
rgrover1 716:11b41f651697 1039 * @param[in] value
rgrover1 716:11b41f651697 1040 * A pointer to a buffer holding the new value
rgrover1 716:11b41f651697 1041 * @param[in] size
rgrover1 716:11b41f651697 1042 * Size of the new value (in bytes).
rgrover1 716:11b41f651697 1043 * @param[in] localOnly
rgrover1 716:11b41f651697 1044 * Should this update be kept on the local
rgrover1 716:11b41f651697 1045 * GattServer regardless of the state of the
rgrover1 716:11b41f651697 1046 * notify/indicate flag in the CCCD for this
rgrover1 716:11b41f651697 1047 * Characteristic? If set to true, no notification
rgrover1 716:11b41f651697 1048 * or indication is generated.
rgrover1 716:11b41f651697 1049 *
rgrover1 716:11b41f651697 1050 * @return BLE_ERROR_NONE if we have successfully set the value of the attribute.
rgrover1 716:11b41f651697 1051 *
rgrover1 716:11b41f651697 1052 * @note: This API is now *deprecated* and will be dropped in the future.
rgrover1 716:11b41f651697 1053 * You should use the parallel API from GattServer directly. A former call
rgrover1 716:11b41f651697 1054 * to ble.updateCharacteristicValue() should be replaced with
rgrover1 716:11b41f651697 1055 * ble.gattServer().write().
rgrover1 716:11b41f651697 1056 */
rgrover1 716:11b41f651697 1057 ble_error_t updateCharacteristicValue(Gap::Handle_t connectionHandle,
rgrover1 716:11b41f651697 1058 GattAttribute::Handle_t attributeHandle,
rgrover1 716:11b41f651697 1059 const uint8_t *value,
rgrover1 716:11b41f651697 1060 uint16_t size,
rgrover1 716:11b41f651697 1061 bool localOnly = false) {
rgrover1 716:11b41f651697 1062 return gattServer().write(connectionHandle, attributeHandle, value, size, localOnly);
rgrover1 716:11b41f651697 1063 }
rgrover1 716:11b41f651697 1064
rgrover1 716:11b41f651697 1065 /**
rgrover1 716:11b41f651697 1066 * Enable the BLE stack's Security Manager. The Security Manager implements
rgrover1 716:11b41f651697 1067 * the actual cryptographic algorithms and protocol exchanges that allow two
rgrover1 716:11b41f651697 1068 * devices to securely exchange data and privately detect each other.
rgrover1 716:11b41f651697 1069 * Calling this API is a prerequisite for encryption and pairing (bonding).
rgrover1 716:11b41f651697 1070 *
rgrover1 716:11b41f651697 1071 * @param[in] enableBonding Allow for bonding.
rgrover1 716:11b41f651697 1072 * @param[in] requireMITM Require protection for man-in-the-middle attacks.
rgrover1 716:11b41f651697 1073 * @param[in] iocaps To specify IO capabilities of this peripheral,
rgrover1 716:11b41f651697 1074 * such as availability of a display or keyboard to
rgrover1 716:11b41f651697 1075 * support out-of-band exchanges of security data.
rgrover1 716:11b41f651697 1076 * @param[in] passkey To specify a static passkey.
rgrover1 716:11b41f651697 1077 *
rgrover1 716:11b41f651697 1078 * @return BLE_ERROR_NONE on success.
rgrover1 716:11b41f651697 1079 *
rgrover1 716:11b41f651697 1080 * @note: This API is now *deprecated* and will be dropped in the future.
rgrover1 716:11b41f651697 1081 * You should use the parallel API from SecurityManager directly. A former
rgrover1 716:11b41f651697 1082 * call to ble.initializeSecurity(...) should be replaced with
rgrover1 716:11b41f651697 1083 * ble.securityManager().init(...).
rgrover1 716:11b41f651697 1084 */
rgrover1 716:11b41f651697 1085 ble_error_t initializeSecurity(bool enableBonding = true,
rgrover1 716:11b41f651697 1086 bool requireMITM = true,
rgrover1 716:11b41f651697 1087 SecurityManager::SecurityIOCapabilities_t iocaps = SecurityManager::IO_CAPS_NONE,
rgrover1 716:11b41f651697 1088 const SecurityManager::Passkey_t passkey = NULL) {
rgrover1 716:11b41f651697 1089 return securityManager().init(enableBonding, requireMITM, iocaps, passkey);
rgrover1 716:11b41f651697 1090 }
rgrover1 716:11b41f651697 1091
rgrover1 716:11b41f651697 1092 /**
rgrover1 716:11b41f651697 1093 * Get the security status of a connection.
rgrover1 716:11b41f651697 1094 *
rgrover1 716:11b41f651697 1095 * @param[in] connectionHandle Handle to identify the connection.
rgrover1 716:11b41f651697 1096 * @param[out] securityStatusP security status.
rgrover1 716:11b41f651697 1097 *
rgrover1 716:11b41f651697 1098 * @return BLE_SUCCESS Or appropriate error code indicating reason for failure.
rgrover1 716:11b41f651697 1099 *
rgrover1 716:11b41f651697 1100 * @note: This API is now *deprecated* and will be dropped in the future.
rgrover1 716:11b41f651697 1101 * You should use the parallel API from SecurityManager directly. A former
rgrover1 716:11b41f651697 1102 * call to ble.getLinkSecurity(...) should be replaced with
rgrover1 716:11b41f651697 1103 * ble.securityManager().getLinkSecurity(...).
rgrover1 716:11b41f651697 1104 */
rgrover1 716:11b41f651697 1105 ble_error_t getLinkSecurity(Gap::Handle_t connectionHandle, SecurityManager::LinkSecurityStatus_t *securityStatusP) {
rgrover1 716:11b41f651697 1106 return securityManager().getLinkSecurity(connectionHandle, securityStatusP);
rgrover1 716:11b41f651697 1107 }
rgrover1 716:11b41f651697 1108
rgrover1 716:11b41f651697 1109 /**
rgrover1 716:11b41f651697 1110 * Delete all peer device context and all related bonding information from
rgrover1 716:11b41f651697 1111 * the database within the security manager.
rgrover1 716:11b41f651697 1112 *
rgrover1 716:11b41f651697 1113 * @retval BLE_ERROR_NONE On success, else an error code indicating reason for failure.
rgrover1 716:11b41f651697 1114 * @retval BLE_ERROR_INVALID_STATE If the API is called without module initialization and/or
rgrover1 716:11b41f651697 1115 * application registration.
rgrover1 716:11b41f651697 1116 *
rgrover1 716:11b41f651697 1117 * @note: This API is now *deprecated* and will be dropped in the future.
rgrover1 716:11b41f651697 1118 * You should use the parallel API from SecurityManager directly. A former
rgrover1 716:11b41f651697 1119 * call to ble.purgeAllBondingState() should be replaced with
rgrover1 716:11b41f651697 1120 * ble.securityManager().purgeAllBondingState().
rgrover1 716:11b41f651697 1121 */
rgrover1 716:11b41f651697 1122 ble_error_t purgeAllBondingState(void) {
rgrover1 716:11b41f651697 1123 return securityManager().purgeAllBondingState();
rgrover1 716:11b41f651697 1124 }
rgrover1 716:11b41f651697 1125
rgrover1 716:11b41f651697 1126 /**
rgrover1 716:11b41f651697 1127 * Setup a callback for timeout events. Refer to Gap::TimeoutSource_t for
rgrover1 716:11b41f651697 1128 * possible event types.
rgrover1 716:11b41f651697 1129 *
rgrover1 716:11b41f651697 1130 * @note: This API is now *deprecated* and will be dropped in the future.
rgrover1 751:868b6dd7a6bf 1131 * You should use the parallel API from Gap directly. A former call
rgrover1 716:11b41f651697 1132 * to ble.onTimeout(callback) should be replaced with
rgrover1 716:11b41f651697 1133 * ble.gap().onTimeout(callback).
rgrover1 716:11b41f651697 1134 */
rgrover1 716:11b41f651697 1135 void onTimeout(Gap::TimeoutEventCallback_t timeoutCallback) {
rgrover1 716:11b41f651697 1136 gap().onTimeout(timeoutCallback);
rgrover1 716:11b41f651697 1137 }
rgrover1 716:11b41f651697 1138
rgrover1 716:11b41f651697 1139 /**
rgrover1 716:11b41f651697 1140 * Setup a callback for connection events. Refer to Gap::ConnectionEventCallback_t.
rgrover1 716:11b41f651697 1141 *
rgrover1 716:11b41f651697 1142 * @note: This API is now *deprecated* and will be dropped in the future.
rgrover1 751:868b6dd7a6bf 1143 * You should use the parallel API from Gap directly. A former call
rgrover1 716:11b41f651697 1144 * to ble.onConnection(callback) should be replaced with
rgrover1 716:11b41f651697 1145 * ble.gap().onConnection(callback).
rgrover1 716:11b41f651697 1146 */
rgrover1 716:11b41f651697 1147 void onConnection(Gap::ConnectionEventCallback_t connectionCallback) {
rgrover1 716:11b41f651697 1148 gap().onConnection(connectionCallback);
rgrover1 716:11b41f651697 1149 }
rgrover1 716:11b41f651697 1150
rgrover1 716:11b41f651697 1151 /**
rgrover1 829:9072de50087b 1152 * Append to a chain of callbacks to be invoked upon GAP disconnection.
rgrover1 716:11b41f651697 1153 *
rgrover1 716:11b41f651697 1154 * @note: This API is now *deprecated* and will be dropped in the future.
rgrover1 751:868b6dd7a6bf 1155 * You should use the parallel API from Gap directly. A former call
rgrover1 716:11b41f651697 1156 * to ble.onDisconnection(callback) should be replaced with
rgrover1 716:11b41f651697 1157 * ble.gap().onDisconnection(callback).
rgrover1 716:11b41f651697 1158 */
rgrover1 716:11b41f651697 1159 void onDisconnection(Gap::DisconnectionEventCallback_t disconnectionCallback) {
rgrover1 716:11b41f651697 1160 gap().onDisconnection(disconnectionCallback);
rgrover1 716:11b41f651697 1161 }
rgrover1 716:11b41f651697 1162
rgrover1 716:11b41f651697 1163 template<typename T>
rgrover1 829:9072de50087b 1164 void onDisconnection(T *tptr, void (T::*mptr)(const Gap::DisconnectionCallbackParams_t*)) {
rgrover1 829:9072de50087b 1165 gap().onDisconnection(tptr, mptr);
rgrover1 716:11b41f651697 1166 }
rgrover1 716:11b41f651697 1167
rgrover1 716:11b41f651697 1168 /**
rgrover1 716:11b41f651697 1169 * Radio Notification is a feature that enables ACTIVE and INACTIVE
rgrover1 716:11b41f651697 1170 * (nACTIVE) signals from the stack that notify the application when the
rgrover1 716:11b41f651697 1171 * radio is in use. The signal is sent using software interrupt.
rgrover1 716:11b41f651697 1172 *
rgrover1 716:11b41f651697 1173 * The ACTIVE signal is sent before the Radio Event starts. The nACTIVE
rgrover1 716:11b41f651697 1174 * signal is sent at the end of the Radio Event. These signals can be used
rgrover1 716:11b41f651697 1175 * by the application programmer to synchronize application logic with radio
rgrover1 716:11b41f651697 1176 * activity. For example, the ACTIVE signal can be used to shut off external
rgrover1 716:11b41f651697 1177 * devices to manage peak current drawn during periods when the radio is on,
rgrover1 716:11b41f651697 1178 * or to trigger sensor data collection for transmission in the Radio Event.
rgrover1 716:11b41f651697 1179 *
rgrover1 716:11b41f651697 1180 * @param callback
rgrover1 716:11b41f651697 1181 * The application handler to be invoked in response to a radio
rgrover1 716:11b41f651697 1182 * ACTIVE/INACTIVE event.
rgrover1 716:11b41f651697 1183 *
rgrover1 716:11b41f651697 1184 * @note: This API is now *deprecated* and will be dropped in the future.
rgrover1 751:868b6dd7a6bf 1185 * You should use the parallel API from Gap directly. A former call
rgrover1 716:11b41f651697 1186 * to ble.onRadioNotification(...) should be replaced with
rgrover1 716:11b41f651697 1187 * ble.gap().onRadioNotification(...).
rgrover1 716:11b41f651697 1188 */
rgrover1 752:424c2ae44553 1189 void onRadioNotification(void (*callback)(bool)) {
rgrover1 716:11b41f651697 1190 gap().onRadioNotification(callback);
rgrover1 716:11b41f651697 1191 }
rgrover1 716:11b41f651697 1192
rgrover1 716:11b41f651697 1193 /**
rgrover1 716:11b41f651697 1194 * Add a callback for the GATT event DATA_SENT (which is triggered when
rgrover1 716:11b41f651697 1195 * updates are sent out by GATT in the form of notifications).
rgrover1 716:11b41f651697 1196 *
rgrover1 716:11b41f651697 1197 * @Note: it is possible to chain together multiple onDataSent callbacks
rgrover1 716:11b41f651697 1198 * (potentially from different modules of an application) to receive updates
rgrover1 716:11b41f651697 1199 * to characteristics.
rgrover1 716:11b41f651697 1200 *
rgrover1 716:11b41f651697 1201 * @Note: it is also possible to setup a callback into a member function of
rgrover1 716:11b41f651697 1202 * some object.
rgrover1 716:11b41f651697 1203 *
rgrover1 716:11b41f651697 1204 * @note: This API is now *deprecated* and will be dropped in the future.
rgrover1 716:11b41f651697 1205 * You should use the parallel API from GattServer directly. A former call
rgrover1 716:11b41f651697 1206 * to ble.onDataSent(...) should be replaced with
rgrover1 716:11b41f651697 1207 * ble.gattServer().onDataSent(...).
rgrover1 716:11b41f651697 1208 */
rgrover1 716:11b41f651697 1209 void onDataSent(void (*callback)(unsigned count)) {
rgrover1 716:11b41f651697 1210 gattServer().onDataSent(callback);
rgrover1 716:11b41f651697 1211 }
rgrover1 716:11b41f651697 1212 template <typename T> void onDataSent(T * objPtr, void (T::*memberPtr)(unsigned count)) {
rgrover1 716:11b41f651697 1213 gattServer().onDataSent(objPtr, memberPtr);
rgrover1 716:11b41f651697 1214 }
rgrover1 716:11b41f651697 1215
rgrover1 716:11b41f651697 1216 /**
rgrover1 716:11b41f651697 1217 * Setup a callback for when an attribute has its value updated by or at the
rgrover1 716:11b41f651697 1218 * connected peer. For a peripheral, this callback triggered when the local
rgrover1 716:11b41f651697 1219 * GATT server has an attribute updated by a write command from the peer.
rgrover1 716:11b41f651697 1220 * For a Central, this callback is triggered when a response is received for
rgrover1 716:11b41f651697 1221 * a write request.
rgrover1 716:11b41f651697 1222 *
rgrover1 716:11b41f651697 1223 * @Note: it is possible to chain together multiple onDataWritten callbacks
rgrover1 716:11b41f651697 1224 * (potentially from different modules of an application) to receive updates
rgrover1 716:11b41f651697 1225 * to characteristics. Many services, such as DFU and UART add their own
rgrover1 716:11b41f651697 1226 * onDataWritten callbacks behind the scenes to trap interesting events.
rgrover1 716:11b41f651697 1227 *
rgrover1 716:11b41f651697 1228 * @Note: it is also possible to setup a callback into a member function of
rgrover1 716:11b41f651697 1229 * some object.
rgrover1 716:11b41f651697 1230 *
rgrover1 716:11b41f651697 1231 * @note: This API is now *deprecated* and will be dropped in the future.
rgrover1 716:11b41f651697 1232 * You should use the parallel API from GattServer directly. A former call
rgrover1 716:11b41f651697 1233 * to ble.onDataWritten(...) should be replaced with
rgrover1 716:11b41f651697 1234 * ble.gattServer().onDataWritten(...).
rgrover1 716:11b41f651697 1235 */
rgrover1 716:11b41f651697 1236 void onDataWritten(void (*callback)(const GattWriteCallbackParams *eventDataP)) {
rgrover1 716:11b41f651697 1237 gattServer().onDataWritten(callback);
rgrover1 716:11b41f651697 1238 }
rgrover1 716:11b41f651697 1239 template <typename T> void onDataWritten(T * objPtr, void (T::*memberPtr)(const GattWriteCallbackParams *context)) {
rgrover1 716:11b41f651697 1240 gattServer().onDataWritten(objPtr, memberPtr);
rgrover1 716:11b41f651697 1241 }
rgrover1 716:11b41f651697 1242
rgrover1 716:11b41f651697 1243 /**
rgrover1 716:11b41f651697 1244 * Setup a callback to be invoked on the peripheral when an attribute is
rgrover1 716:11b41f651697 1245 * being read by a remote client.
rgrover1 716:11b41f651697 1246 *
rgrover1 716:11b41f651697 1247 * @Note: this functionality may not be available on all underlying stacks.
rgrover1 716:11b41f651697 1248 * You could use GattCharacteristic::setReadAuthorizationCallback() as an
rgrover1 716:11b41f651697 1249 * alternative.
rgrover1 716:11b41f651697 1250 *
rgrover1 716:11b41f651697 1251 * @Note: it is possible to chain together multiple onDataRead callbacks
rgrover1 716:11b41f651697 1252 * (potentially from different modules of an application) to receive updates
rgrover1 716:11b41f651697 1253 * to characteristics. Services may add their own onDataRead callbacks
rgrover1 716:11b41f651697 1254 * behind the scenes to trap interesting events.
rgrover1 716:11b41f651697 1255 *
rgrover1 716:11b41f651697 1256 * @Note: it is also possible to setup a callback into a member function of
rgrover1 716:11b41f651697 1257 * some object.
rgrover1 716:11b41f651697 1258 *
rgrover1 716:11b41f651697 1259 * @return BLE_ERROR_NOT_IMPLEMENTED if this functionality isn't available;
rgrover1 716:11b41f651697 1260 * else BLE_ERROR_NONE.
rgrover1 716:11b41f651697 1261 *
rgrover1 716:11b41f651697 1262 * @note: This API is now *deprecated* and will be dropped in the future.
rgrover1 716:11b41f651697 1263 * You should use the parallel API from GattServer directly. A former call
rgrover1 716:11b41f651697 1264 * to ble.onDataRead(...) should be replaced with
rgrover1 716:11b41f651697 1265 * ble.gattServer().onDataRead(...).
rgrover1 716:11b41f651697 1266 */
rgrover1 716:11b41f651697 1267 ble_error_t onDataRead(void (*callback)(const GattReadCallbackParams *eventDataP)) {
rgrover1 716:11b41f651697 1268 return gattServer().onDataRead(callback);
rgrover1 716:11b41f651697 1269 }
rgrover1 716:11b41f651697 1270 template <typename T> ble_error_t onDataRead(T * objPtr, void (T::*memberPtr)(const GattReadCallbackParams *context)) {
rgrover1 716:11b41f651697 1271 return gattServer().onDataRead(objPtr, memberPtr);
rgrover1 716:11b41f651697 1272 }
rgrover1 716:11b41f651697 1273
rgrover1 716:11b41f651697 1274 /**
rgrover1 716:11b41f651697 1275 * Setup a callback for when notifications/indications are enabled for a
rgrover1 716:11b41f651697 1276 * characteristic on the local GattServer.
rgrover1 716:11b41f651697 1277 *
rgrover1 716:11b41f651697 1278 * @note: This API is now *deprecated* and will be dropped in the future.
rgrover1 716:11b41f651697 1279 * You should use the parallel API from GattServer directly. A former call
rgrover1 716:11b41f651697 1280 * to ble.onUpdatesEnabled(callback) should be replaced with
rgrover1 716:11b41f651697 1281 * ble.gattServer().onUpdatesEnabled(callback).
rgrover1 716:11b41f651697 1282 */
rgrover1 716:11b41f651697 1283 void onUpdatesEnabled(GattServer::EventCallback_t callback) {
rgrover1 716:11b41f651697 1284 gattServer().onUpdatesEnabled(callback);
rgrover1 716:11b41f651697 1285 }
rgrover1 716:11b41f651697 1286
rgrover1 716:11b41f651697 1287 /**
rgrover1 716:11b41f651697 1288 * Setup a callback for when notifications/indications are disabled for a
rgrover1 716:11b41f651697 1289 * characteristic on the local GattServer.
rgrover1 716:11b41f651697 1290 *
rgrover1 716:11b41f651697 1291 * @note: This API is now *deprecated* and will be dropped in the future.
rgrover1 716:11b41f651697 1292 * You should use the parallel API from GattServer directly. A former call
rgrover1 716:11b41f651697 1293 * to ble.onUpdatesEnabled(callback) should be replaced with
rgrover1 716:11b41f651697 1294 * ble.gattServer().onUpdatesEnabled(callback).
rgrover1 716:11b41f651697 1295 */
rgrover1 716:11b41f651697 1296 void onUpdatesDisabled(GattServer::EventCallback_t callback) {
rgrover1 716:11b41f651697 1297 gattServer().onUpdatesDisabled(callback);
rgrover1 716:11b41f651697 1298 }
rgrover1 716:11b41f651697 1299
rgrover1 716:11b41f651697 1300 /**
rgrover1 716:11b41f651697 1301 * Setup a callback for when the GATT server receives a response for an
rgrover1 716:11b41f651697 1302 * indication event sent previously.
rgrover1 716:11b41f651697 1303 *
rgrover1 716:11b41f651697 1304 * @note: This API is now *deprecated* and will be dropped in the future.
rgrover1 716:11b41f651697 1305 * You should use the parallel API from GattServer directly. A former call
rgrover1 716:11b41f651697 1306 * to ble.onConfirmationReceived(callback) should be replaced with
rgrover1 716:11b41f651697 1307 * ble.gattServer().onConfirmationReceived(callback).
rgrover1 716:11b41f651697 1308 */
rgrover1 716:11b41f651697 1309 void onConfirmationReceived(GattServer::EventCallback_t callback) {
rgrover1 716:11b41f651697 1310 gattServer().onConfirmationReceived(callback);
rgrover1 716:11b41f651697 1311 }
rgrover1 716:11b41f651697 1312
rgrover1 716:11b41f651697 1313 /**
rgrover1 716:11b41f651697 1314 * Setup a callback for when the security setup procedure (key generation
rgrover1 716:11b41f651697 1315 * and exchange) for a link has started. This will be skipped for bonded
rgrover1 716:11b41f651697 1316 * devices. The callback is passed in parameters received from the peer's
rgrover1 716:11b41f651697 1317 * security request: bool allowBonding, bool requireMITM, and
rgrover1 716:11b41f651697 1318 * SecurityIOCapabilities_t.
rgrover1 716:11b41f651697 1319 *
rgrover1 716:11b41f651697 1320 * @note: This API is now *deprecated* and will be dropped in the future.
rgrover1 716:11b41f651697 1321 * You should use the parallel API from SecurityManager directly. A former
rgrover1 716:11b41f651697 1322 * call to ble.onSecuritySetupInitiated(callback) should be replaced with
rgrover1 716:11b41f651697 1323 * ble.securityManager().onSecuritySetupInitiated(callback).
rgrover1 716:11b41f651697 1324 */
rgrover1 716:11b41f651697 1325 void onSecuritySetupInitiated(SecurityManager::SecuritySetupInitiatedCallback_t callback) {
rgrover1 716:11b41f651697 1326 securityManager().onSecuritySetupInitiated(callback);
rgrover1 716:11b41f651697 1327 }
rgrover1 716:11b41f651697 1328
rgrover1 716:11b41f651697 1329 /**
rgrover1 716:11b41f651697 1330 * Setup a callback for when the security setup procedure (key generation
rgrover1 716:11b41f651697 1331 * and exchange) for a link has completed. This will be skipped for bonded
rgrover1 716:11b41f651697 1332 * devices. The callback is passed in the success/failure status of the
rgrover1 716:11b41f651697 1333 * security setup procedure.
rgrover1 716:11b41f651697 1334 *
rgrover1 716:11b41f651697 1335 * @note: This API is now *deprecated* and will be dropped in the future.
rgrover1 716:11b41f651697 1336 * You should use the parallel API from SecurityManager directly. A former
rgrover1 716:11b41f651697 1337 * call to ble.onSecuritySetupCompleted(callback) should be replaced with
rgrover1 716:11b41f651697 1338 * ble.securityManager().onSecuritySetupCompleted(callback).
rgrover1 716:11b41f651697 1339 */
rgrover1 716:11b41f651697 1340 void onSecuritySetupCompleted(SecurityManager::SecuritySetupCompletedCallback_t callback) {
rgrover1 716:11b41f651697 1341 securityManager().onSecuritySetupCompleted(callback);
rgrover1 716:11b41f651697 1342 }
rgrover1 716:11b41f651697 1343
rgrover1 716:11b41f651697 1344 /**
rgrover1 716:11b41f651697 1345 * Setup a callback for when a link with the peer is secured. For bonded
rgrover1 716:11b41f651697 1346 * devices, subsequent reconnections with bonded peer will result only in
rgrover1 716:11b41f651697 1347 * this callback when the link is secured and setup procedures will not
rgrover1 716:11b41f651697 1348 * occur unless the bonding information is either lost or deleted on either
rgrover1 716:11b41f651697 1349 * or both sides. The callback is passed in a SecurityManager::SecurityMode_t according
rgrover1 716:11b41f651697 1350 * to the level of security in effect for the secured link.
rgrover1 716:11b41f651697 1351 *
rgrover1 716:11b41f651697 1352 * @note: This API is now *deprecated* and will be dropped in the future.
rgrover1 716:11b41f651697 1353 * You should use the parallel API from SecurityManager directly. A former
rgrover1 716:11b41f651697 1354 * call to ble.onLinkSecured(callback) should be replaced with
rgrover1 716:11b41f651697 1355 * ble.securityManager().onLinkSecured(callback).
rgrover1 716:11b41f651697 1356 */
rgrover1 716:11b41f651697 1357 void onLinkSecured(SecurityManager::LinkSecuredCallback_t callback) {
rgrover1 716:11b41f651697 1358 securityManager().onLinkSecured(callback);
rgrover1 716:11b41f651697 1359 }
rgrover1 716:11b41f651697 1360
rgrover1 716:11b41f651697 1361 /**
rgrover1 716:11b41f651697 1362 * Setup a callback for successful bonding; i.e. that link-specific security
rgrover1 716:11b41f651697 1363 * context is stored persistently for a peer device.
rgrover1 716:11b41f651697 1364 *
rgrover1 716:11b41f651697 1365 * @note: This API is now *deprecated* and will be dropped in the future.
rgrover1 716:11b41f651697 1366 * You should use the parallel API from SecurityManager directly. A former
rgrover1 716:11b41f651697 1367 * call to ble.onSecurityContextStored(callback) should be replaced with
rgrover1 716:11b41f651697 1368 * ble.securityManager().onSecurityContextStored(callback).
rgrover1 716:11b41f651697 1369 */
rgrover1 716:11b41f651697 1370 void onSecurityContextStored(SecurityManager::HandleSpecificEvent_t callback) {
rgrover1 716:11b41f651697 1371 securityManager().onSecurityContextStored(callback);
rgrover1 716:11b41f651697 1372 }
rgrover1 716:11b41f651697 1373
rgrover1 716:11b41f651697 1374 /**
rgrover1 716:11b41f651697 1375 * Setup a callback for when the passkey needs to be displayed on a
rgrover1 716:11b41f651697 1376 * peripheral with DISPLAY capability. This happens when security is
rgrover1 716:11b41f651697 1377 * configured to prevent Man-In-The-Middle attacks, and a PIN (or passkey)
rgrover1 716:11b41f651697 1378 * needs to be exchanged between the peers to authenticate the connection
rgrover1 716:11b41f651697 1379 * attempt.
rgrover1 716:11b41f651697 1380 *
rgrover1 716:11b41f651697 1381 * @note: This API is now *deprecated* and will be dropped in the future.
rgrover1 716:11b41f651697 1382 * You should use the parallel API from SecurityManager directly. A former
rgrover1 716:11b41f651697 1383 * call to ble.onPasskeyDisplay(callback) should be replaced with
rgrover1 716:11b41f651697 1384 * ble.securityManager().onPasskeyDisplay(callback).
rgrover1 716:11b41f651697 1385 */
rgrover1 716:11b41f651697 1386 void onPasskeyDisplay(SecurityManager::PasskeyDisplayCallback_t callback) {
rgrover1 716:11b41f651697 1387 return securityManager().onPasskeyDisplay(callback);
rgrover1 716:11b41f651697 1388 }
rgrover1 716:11b41f651697 1389
rgrover1 716:11b41f651697 1390 private:
rgrover1 806:50c121156a71 1391 BLE(const BLE&);
rgrover1 806:50c121156a71 1392 BLE &operator=(const BLE &);
rgrover1 806:50c121156a71 1393
rgrover1 806:50c121156a71 1394 private:
rgrover1 858:38a4963a455e 1395 InstanceID_t instanceID;
rgrover1 822:a0f080d1e836 1396 BLEInstanceBase *transport; /* the device specific backend */
rgrover1 716:11b41f651697 1397 };
rgrover1 716:11b41f651697 1398
rgrover1 716:11b41f651697 1399 typedef BLE BLEDevice; /* DEPRECATED. This type alias is retained for the sake of compatibility with older
rgrover1 716:11b41f651697 1400 * code. Will be dropped at some point soon.*/
rgrover1 716:11b41f651697 1401
rgrover1 716:11b41f651697 1402 #endif // ifndef __BLE_H__