Diff: targets/TARGET_Maxim/TARGET_MAX32610/serial_api.c

Revision:

149:156823d33999

Parent:

147:30b64687e01f

diff -r 21d94c44109e -r 156823d33999 targets/TARGET_Maxim/TARGET_MAX32610/serial_api.c
--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/targets/TARGET_Maxim/TARGET_MAX32610/serial_api.c	Fri Oct 28 11:17:30 2016 +0100
@@ -0,0 +1,398 @@
+/*******************************************************************************
+ * Copyright (C) 2015 Maxim Integrated Products, Inc., All Rights Reserved.
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a
+ * copy of this software and associated documentation files (the "Software"),
+ * to deal in the Software without restriction, including without limitation
+ * the rights to use, copy, modify, merge, publish, distribute, sublicense,
+ * and/or sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included
+ * in all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS
+ * OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.
+ * IN NO EVENT SHALL MAXIM INTEGRATED BE LIABLE FOR ANY CLAIM, DAMAGES
+ * OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE,
+ * ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
+ *
+ * Except as contained in this notice, the name of Maxim Integrated
+ * Products, Inc. shall not be used except as stated in the Maxim Integrated
+ * Products, Inc. Branding Policy.
+ *
+ * The mere transfer of this software does not imply any licenses
+ * of trade secrets, proprietary technology, copyrights, patents,
+ * trademarks, maskwork rights, or any other form of intellectual
+ * property whatsoever. Maxim Integrated Products, Inc. retains all
+ * ownership rights.
+ *******************************************************************************
+ */
+
+#include <string.h>
+#include "mbed_assert.h"
+#include "cmsis.h"
+#include "serial_api.h"
+#include "gpio_api.h"
+#include "uart_regs.h"
+#include "ioman_regs.h"
+#include "PeripheralPins.h"
+
+#define UART_NUM 2
+#define DEFAULT_BAUD 9600
+#define DEFAULT_STOP 1
+#define DEFAULT_PARITY ParityNone
+
+#define UART_ERRORS (MXC_F_UART_INTFL_RX_FRAME_ERROR | \
+                     MXC_F_UART_INTFL_RX_PARITY_ERROR | \
+                     MXC_F_UART_INTFL_RX_OVERRUN)
+
+// Variables for managing the stdio UART
+int stdio_uart_inited;
+serial_t stdio_uart;
+
+// Variables for interrupt driven
+static uart_irq_handler irq_handler;
+static uint32_t serial_irq_ids[UART_NUM];
+
+//******************************************************************************
+void serial_init(serial_t *obj, PinName tx, PinName rx)
+{
+    // Determine which uart is associated with each pin
+    UARTName uart_tx = (UARTName)pinmap_peripheral(tx, PinMap_UART_TX);
+    UARTName uart_rx = (UARTName)pinmap_peripheral(rx, PinMap_UART_RX);
+    UARTName uart = (UARTName)pinmap_merge(uart_tx, uart_rx);
+
+    // Make sure that both pins are pointing to the same uart
+    MBED_ASSERT(uart != (UARTName)NC);
+
+    // Set the obj pointer to the proper uart
+    obj->uart = (mxc_uart_regs_t*)uart;
+
+    // Set the uart index
+    obj->index = MXC_UART_BASE_TO_INSTANCE(obj->uart);
+
+    // Configure the pins
+    pinmap_pinout(tx, PinMap_UART_TX);
+    pinmap_pinout(rx, PinMap_UART_RX);
+
+    // Flush the RX and TX FIFOs, clear the settings
+    obj->uart->ctrl = ( MXC_F_UART_CTRL_TX_FIFO_FLUSH |  MXC_F_UART_CTRL_RX_FIFO_FLUSH);
+
+    // Disable interrupts
+    obj->uart->inten = 0;
+    obj->uart->intfl = 0;
+
+    // Configure to default settings
+    serial_baud(obj, DEFAULT_BAUD);
+    serial_format(obj, 8, ParityNone, 1);
+
+    // Manage stdio UART
+    if(uart == STDIO_UART) {
+        stdio_uart_inited = 1;
+        memcpy(&stdio_uart, obj, sizeof(serial_t));
+    }
+}
+
+//******************************************************************************
+void serial_baud(serial_t *obj, int baudrate)
+{
+    uint32_t idiv = 0, ddiv = 0, div = 0;
+
+    // Calculate the integer and decimal portions
+    div = SystemCoreClock / ((baudrate / 100) * 128);
+    idiv = (div / 100);
+    ddiv = (div - idiv * 100) * 128 / 100;
+
+    obj->uart->baud_int = idiv;
+    obj->uart->baud_div_128 = ddiv;
+
+    // Enable the baud clock
+    obj->uart->ctrl |= MXC_F_UART_CTRL_BAUD_CLK_EN;
+}
+
+//******************************************************************************
+void serial_format(serial_t *obj, int data_bits, SerialParity parity, int stop_bits)
+{
+
+    // Check the validity of the inputs
+    MBED_ASSERT((data_bits > 4) && (data_bits < 9));
+    MBED_ASSERT((parity == ParityNone) || (parity == ParityOdd) ||
+                (parity == ParityEven) || (parity == ParityForced1) ||
+                (parity == ParityForced0));
+    MBED_ASSERT((stop_bits == 1) || (stop_bits == 2));
+
+    // Adjust the stop and data bits
+    stop_bits -= 1;
+    data_bits -= 5;
+
+    // Adjust the parity setting
+    int paren = 0, mode = 0;
+    switch (parity) {
+        case ParityNone:
+            paren = 0;
+            mode = 0;
+            break;
+        case ParityOdd :
+            paren = 1;
+            mode = 0;
+            break;
+        case ParityEven:
+            paren = 1;
+            mode = 1;
+            break;
+        case ParityForced1:
+            // Hardware does not support forced parity
+            MBED_ASSERT(0);
+            break;
+        case ParityForced0:
+            // Hardware does not support forced parity
+            MBED_ASSERT(0);
+            break;
+        default:
+            paren = 1;
+            mode = 0;
+            break;
+    }
+
+    obj->uart->ctrl |= ((data_bits << MXC_F_UART_CTRL_CHAR_LENGTH_POS) |
+                        (stop_bits << MXC_F_UART_CTRL_STOP_BIT_MODE_POS) |
+                        (paren << MXC_F_UART_CTRL_PARITY_ENABLE_POS) |
+                        (mode << MXC_F_UART_CTRL_PARITY_MODE_POS));
+}
+
+//******************************************************************************
+void uart_handler(mxc_uart_regs_t* uart, int id)
+{
+    // Check for errors or RX Threshold
+    if(uart->intfl & (MXC_F_UART_INTFL_RX_OVER_THRESHOLD | UART_ERRORS)) {
+        irq_handler(serial_irq_ids[id], RxIrq);
+        uart->intfl &= ~(MXC_F_UART_INTFL_RX_OVER_THRESHOLD | UART_ERRORS);
+    }
+
+    // Check for TX Threshold
+    if(uart->intfl & MXC_F_UART_INTFL_TX_ALMOST_EMPTY) {
+        irq_handler(serial_irq_ids[id], TxIrq);
+        uart->intfl &= ~(MXC_F_UART_INTFL_TX_ALMOST_EMPTY);
+    }
+}
+
+void uart0_handler(void)
+{
+    uart_handler(MXC_UART0, 0);
+}
+void uart1_handler(void)
+{
+    uart_handler(MXC_UART1, 1);
+}
+
+//******************************************************************************
+void serial_irq_handler(serial_t *obj, uart_irq_handler handler, uint32_t id)
+{
+    irq_handler = handler;
+    serial_irq_ids[obj->index] = id;
+}
+
+//******************************************************************************
+void serial_irq_set(serial_t *obj, SerialIrq irq, uint32_t enable)
+{
+    if(obj->index == 0) {
+        NVIC_SetVector(UART0_IRQn, (uint32_t)uart0_handler);
+        NVIC_EnableIRQ(UART0_IRQn);
+    } else {
+        NVIC_SetVector(UART1_IRQn, (uint32_t)uart1_handler);
+        NVIC_EnableIRQ(UART1_IRQn);
+    }
+
+    if(irq == RxIrq) {
+        // Set the RX FIFO Threshold to 1
+        obj->uart->ctrl &= ~MXC_F_UART_CTRL_RX_THRESHOLD;
+        obj->uart->ctrl |= 0x1;
+        // Enable RX FIFO Threshold Interrupt
+        if(enable) {
+            // Clear pending interrupts
+            obj->uart->intfl = 0;
+            obj->uart->inten |= (MXC_F_UART_INTFL_RX_OVER_THRESHOLD |
+                                 UART_ERRORS);
+        } else {
+            // Clear pending interrupts
+            obj->uart->intfl = 0;
+            obj->uart->inten &= ~(MXC_F_UART_INTFL_RX_OVER_THRESHOLD |
+                                  UART_ERRORS);
+        }
+
+    } else if (irq == TxIrq) {
+        // Enable TX Almost empty Interrupt
+        if(enable) {
+            // Clear pending interrupts
+            obj->uart->intfl = 0;
+            obj->uart->inten |= MXC_F_UART_INTFL_TX_ALMOST_EMPTY;
+        } else {
+            // Clear pending interrupts
+            obj->uart->intfl = 0;
+            obj->uart->inten &= ~MXC_F_UART_INTFL_TX_ALMOST_EMPTY;
+        }
+
+    } else {
+        MBED_ASSERT(0);
+    }
+}
+
+
+//******************************************************************************
+int serial_getc(serial_t *obj)
+{
+    int c;
+
+    // Wait for data to be available
+    while(obj->uart->status & MXC_F_UART_STATUS_RX_FIFO_EMPTY) {}
+    c = obj->uart->tx_rx_fifo & 0xFF;
+
+    return c;
+}
+
+//******************************************************************************
+void serial_putc(serial_t *obj, int c)
+{
+    // Wait for TXFIFO to not be full
+    while(obj->uart->status & MXC_F_UART_STATUS_TX_FIFO_FULL) {}
+    obj->uart->tx_rx_fifo = c;
+}
+
+//******************************************************************************
+int serial_readable(serial_t *obj)
+{
+    return (!(obj->uart->status & MXC_F_UART_STATUS_RX_FIFO_EMPTY));
+}
+
+//******************************************************************************
+int serial_writable(serial_t *obj)
+{
+    return (!(obj->uart->status & MXC_F_UART_STATUS_TX_FIFO_FULL));
+}
+
+//******************************************************************************
+void serial_clear(serial_t *obj)
+{
+    // Clear the rx and tx fifos
+    obj->uart->ctrl |= (MXC_F_UART_CTRL_TX_FIFO_FLUSH  | MXC_F_UART_CTRL_RX_FIFO_FLUSH );
+}
+
+//******************************************************************************
+void serial_break_set(serial_t *obj)
+{
+    // Make sure that nothing is being sent
+    while (!(obj->uart->status & MXC_F_UART_STATUS_TX_FIFO_EMPTY));
+    while (obj->uart->status & MXC_F_UART_STATUS_TX_BUSY);
+
+    // Configure the GPIO to outpu 0
+    gpio_t tx_gpio;
+    switch (((UARTName)(obj->uart))) {
+        case UART_0:
+            gpio_init_out(&tx_gpio, UART0_TX);
+            break;
+        case UART_1:
+            gpio_init_out(&tx_gpio, UART1_TX);
+            break;
+        default:
+            gpio_init_out(&tx_gpio, (PinName)NC);
+            break;
+    }
+
+    gpio_write(&tx_gpio, 0);
+
+    // GPIO is setup now, but we need to maps gpio to the pin
+    switch (((UARTName)(obj->uart))) {
+        case UART_0:
+            MXC_IOMAN->uart0_req &= ~MXC_F_IOMAN_UART_CORE_IO;
+            MBED_ASSERT((MXC_IOMAN->uart0_ack & (MXC_F_IOMAN_UART_CORE_IO | MXC_F_IOMAN_UART_CORE_IO)) == 0);
+            break;
+        case UART_1:
+            MXC_IOMAN->uart1_req &= ~MXC_F_IOMAN_UART_CORE_IO;
+            MBED_ASSERT((MXC_IOMAN->uart1_ack & (MXC_F_IOMAN_UART_CORE_IO | MXC_F_IOMAN_UART_CORE_IO)) == 0);
+            break;
+        default:
+            break;
+    }
+}
+
+//******************************************************************************
+void serial_break_clear(serial_t *obj)
+{
+    // Configure the GPIO to output 1
+    gpio_t tx_gpio;
+    switch (((UARTName)(obj->uart))) {
+        case UART_0:
+            gpio_init_out(&tx_gpio, UART0_TX);
+            break;
+        case UART_1:
+            gpio_init_out(&tx_gpio, UART1_TX);
+            break;
+        default:
+            gpio_init_out(&tx_gpio, (PinName)NC);
+            break;
+    }
+
+    gpio_write(&tx_gpio, 1);
+
+    // Renable UART
+    switch (((UARTName)(obj->uart))) {
+        case UART_0:
+            serial_pinout_tx(UART0_TX);
+            break;
+        case UART_1:
+            serial_pinout_tx(UART1_TX);
+            break;
+        default:
+            serial_pinout_tx((PinName)NC);
+            break;
+    }
+}
+
+//******************************************************************************
+void serial_pinout_tx(PinName tx)
+{
+    pinmap_pinout(tx, PinMap_UART_TX);
+}
+
+
+//******************************************************************************
+void serial_set_flow_control(serial_t *obj, FlowControl type, PinName rxflow, PinName txflow)
+{
+    if(FlowControlNone == type) {
+        // Disable hardware flow control
+        obj->uart->ctrl &= ~(MXC_F_UART_CTRL_HW_FLOW_CTRL_EN);
+        return;
+    }
+
+    // Check to see if we can use HW flow control
+    UARTName uart_cts = (UARTName)pinmap_peripheral(txflow, PinMap_UART_CTS);
+    UARTName uart_rts = (UARTName)pinmap_peripheral(rxflow, PinMap_UART_RTS);
+    UARTName uart = (UARTName)pinmap_merge(uart_cts, uart_rts);
+
+    if((FlowControlCTS == type) || (FlowControlRTSCTS== type)) {
+        // Make sure pin is in the PinMap
+        MBED_ASSERT(uart_cts != (UARTName)NC);
+
+        // Enable the pin for CTS function
+        pinmap_pinout(txflow, PinMap_UART_CTS);
+    }
+
+    if((FlowControlRTS == type) || (FlowControlRTSCTS== type))  {
+        // Make sure pin is in the PinMap
+        MBED_ASSERT(uart_rts != (UARTName)NC);
+
+        // Enable the pin for RTS function
+        pinmap_pinout(rxflow, PinMap_UART_RTS);
+    }
+
+    if(FlowControlRTSCTS == type){ 
+        // Make sure that the pins are pointing to the same UART
+        MBED_ASSERT(uart != (UARTName)NC);
+    }
+
+    // Enable hardware flow control
+    obj->uart->ctrl |= MXC_F_UART_CTRL_HW_FLOW_CTRL_EN;
+}