Fork of mbed-dev build 137, last build before FAT file system appears to be broken. Also reduced HSE timeout time in STM4XX HAL
Fork of mbed-dev by
Diff: targets/hal/TARGET_NXP/TARGET_LPC23XX/PinNames.h
- Revision:
- 144:ef7eb2e8f9f7
- Parent:
- 0:9b334a45a8ff
--- a/targets/hal/TARGET_NXP/TARGET_LPC23XX/PinNames.h Tue Aug 02 14:07:36 2016 +0000 +++ b/targets/hal/TARGET_NXP/TARGET_LPC23XX/PinNames.h Fri Sep 02 15:07:44 2016 +0100 @@ -1,104 +1,104 @@ -/* mbed Microcontroller Library - * Copyright (c) 2006-2013 ARM Limited - * - * Licensed under the Apache License, Version 2.0 (the "License"); - * you may not use this file except in compliance with the License. - * You may obtain a copy of the License at - * - * http://www.apache.org/licenses/LICENSE-2.0 - * - * Unless required by applicable law or agreed to in writing, software - * distributed under the License is distributed on an "AS IS" BASIS, - * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - * See the License for the specific language governing permissions and - * limitations under the License. - */ - -#ifndef MBED_PINNAMES_H -#define MBED_PINNAMES_H - -#include "cmsis.h" - -#ifdef __cplusplus -extern "C" { -#endif - -typedef enum { - PIN_INPUT, - PIN_OUTPUT -} PinDirection; - -#define PORT_SHIFT 5 - -typedef enum { - // LPC Pin Names - P0_0 = LPC_GPIO0_BASE, - P0_1, P0_2, P0_3, P0_4, P0_5, P0_6, P0_7, P0_8, P0_9, P0_10, P0_11, P0_12, P0_13, P0_14, P0_15, P0_16, P0_17, P0_18, P0_19, P0_20, P0_21, P0_22, P0_23, P0_24, P0_25, P0_26, P0_27, P0_28, P0_29, P0_30, P0_31, - P1_0, P1_1, P1_2, P1_3, P1_4, P1_5, P1_6, P1_7, P1_8, P1_9, P1_10, P1_11, P1_12, P1_13, P1_14, P1_15, P1_16, P1_17, P1_18, P1_19, P1_20, P1_21, P1_22, P1_23, P1_24, P1_25, P1_26, P1_27, P1_28, P1_29, P1_30, P1_31, - P2_0, P2_1, P2_2, P2_3, P2_4, P2_5, P2_6, P2_7, P2_8, P2_9, P2_10, P2_11, P2_12, P2_13, P2_14, P2_15, P2_16, P2_17, P2_18, P2_19, P2_20, P2_21, P2_22, P2_23, P2_24, P2_25, P2_26, P2_27, P2_28, P2_29, P2_30, P2_31, - P3_0, P3_1, P3_2, P3_3, P3_4, P3_5, P3_6, P3_7, P3_8, P3_9, P3_10, P3_11, P3_12, P3_13, P3_14, P3_15, P3_16, P3_17, P3_18, P3_19, P3_20, P3_21, P3_22, P3_23, P3_24, P3_25, P3_26, P3_27, P3_28, P3_29, P3_30, P3_31, - P4_0, P4_1, P4_2, P4_3, P4_4, P4_5, P4_6, P4_7, P4_8, P4_9, P4_10, P4_11, P4_12, P4_13, P4_14, P4_15, P4_16, P4_17, P4_18, P4_19, P4_20, P4_21, P4_22, P4_23, P4_24, P4_25, P4_26, P4_27, P4_28, P4_29, P4_30, P4_31, - - // mbed DIP Pin Names - p5 = P0_9, - p6 = P0_8, - p7 = P0_7, - p8 = P0_6, - p9 = P0_0, - p10 = P0_1, - p11 = P0_18, - p12 = P0_17, - p13 = P0_15, - p14 = P0_16, - p15 = P0_23, - p16 = P0_24, - p17 = P0_25, - p18 = P0_26, - p19 = P1_30, - p20 = P1_31, - p21 = P2_5, - p22 = P2_4, - p23 = P2_3, - p24 = P2_2, - p25 = P2_1, - p26 = P2_0, - p27 = P0_11, - p28 = P0_10, - p29 = P0_5, - p30 = P0_4, - - // Other mbed Pin Names - LED1 = P1_18, - LED2 = P1_20, - LED3 = P1_21, - LED4 = P1_23, - - USBTX = P0_2, - USBRX = P0_3, - - // Not connected - NC = (int)0xFFFFFFFF -} PinName; - -typedef enum { - PullUp = 0, - PullDown = 3, - PullNone = 2, - OpenDrain = 4, - PullDefault = PullDown -} PinMode; - -// version of PINCON_TypeDef using register arrays -typedef struct { - __IO uint32_t PINSEL[11]; - uint32_t RESERVED0[5]; - __IO uint32_t PINMODE[10]; -} PINCONARRAY_TypeDef; - -#define PINCONARRAY ((PINCONARRAY_TypeDef *)LPC_PINCON_BASE) - -#ifdef __cplusplus -} -#endif - -#endif +/* mbed Microcontroller Library + * Copyright (c) 2006-2013 ARM Limited + * + * Licensed under the Apache License, Version 2.0 (the "License"); + * you may not use this file except in compliance with the License. + * You may obtain a copy of the License at + * + * http://www.apache.org/licenses/LICENSE-2.0 + * + * Unless required by applicable law or agreed to in writing, software + * distributed under the License is distributed on an "AS IS" BASIS, + * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + * See the License for the specific language governing permissions and + * limitations under the License. + */ + +#ifndef MBED_PINNAMES_H +#define MBED_PINNAMES_H + +#include "cmsis.h" + +#ifdef __cplusplus +extern "C" { +#endif + +typedef enum { + PIN_INPUT, + PIN_OUTPUT +} PinDirection; + +#define PORT_SHIFT 5 + +typedef enum { + // LPC Pin Names + P0_0 = LPC_GPIO0_BASE, + P0_1, P0_2, P0_3, P0_4, P0_5, P0_6, P0_7, P0_8, P0_9, P0_10, P0_11, P0_12, P0_13, P0_14, P0_15, P0_16, P0_17, P0_18, P0_19, P0_20, P0_21, P0_22, P0_23, P0_24, P0_25, P0_26, P0_27, P0_28, P0_29, P0_30, P0_31, + P1_0, P1_1, P1_2, P1_3, P1_4, P1_5, P1_6, P1_7, P1_8, P1_9, P1_10, P1_11, P1_12, P1_13, P1_14, P1_15, P1_16, P1_17, P1_18, P1_19, P1_20, P1_21, P1_22, P1_23, P1_24, P1_25, P1_26, P1_27, P1_28, P1_29, P1_30, P1_31, + P2_0, P2_1, P2_2, P2_3, P2_4, P2_5, P2_6, P2_7, P2_8, P2_9, P2_10, P2_11, P2_12, P2_13, P2_14, P2_15, P2_16, P2_17, P2_18, P2_19, P2_20, P2_21, P2_22, P2_23, P2_24, P2_25, P2_26, P2_27, P2_28, P2_29, P2_30, P2_31, + P3_0, P3_1, P3_2, P3_3, P3_4, P3_5, P3_6, P3_7, P3_8, P3_9, P3_10, P3_11, P3_12, P3_13, P3_14, P3_15, P3_16, P3_17, P3_18, P3_19, P3_20, P3_21, P3_22, P3_23, P3_24, P3_25, P3_26, P3_27, P3_28, P3_29, P3_30, P3_31, + P4_0, P4_1, P4_2, P4_3, P4_4, P4_5, P4_6, P4_7, P4_8, P4_9, P4_10, P4_11, P4_12, P4_13, P4_14, P4_15, P4_16, P4_17, P4_18, P4_19, P4_20, P4_21, P4_22, P4_23, P4_24, P4_25, P4_26, P4_27, P4_28, P4_29, P4_30, P4_31, + + // mbed DIP Pin Names + p5 = P0_9, + p6 = P0_8, + p7 = P0_7, + p8 = P0_6, + p9 = P0_0, + p10 = P0_1, + p11 = P0_18, + p12 = P0_17, + p13 = P0_15, + p14 = P0_16, + p15 = P0_23, + p16 = P0_24, + p17 = P0_25, + p18 = P0_26, + p19 = P1_30, + p20 = P1_31, + p21 = P2_5, + p22 = P2_4, + p23 = P2_3, + p24 = P2_2, + p25 = P2_1, + p26 = P2_0, + p27 = P0_11, + p28 = P0_10, + p29 = P0_5, + p30 = P0_4, + + // Other mbed Pin Names + LED1 = P1_18, + LED2 = P1_20, + LED3 = P1_21, + LED4 = P1_23, + + USBTX = P0_2, + USBRX = P0_3, + + // Not connected + NC = (int)0xFFFFFFFF +} PinName; + +typedef enum { + PullUp = 0, + PullDown = 3, + PullNone = 2, + OpenDrain = 4, + PullDefault = PullDown +} PinMode; + +// version of PINCON_TypeDef using register arrays +typedef struct { + __IO uint32_t PINSEL[11]; + uint32_t RESERVED0[5]; + __IO uint32_t PINMODE[10]; +} PINCONARRAY_TypeDef; + +#define PINCONARRAY ((PINCONARRAY_TypeDef *)LPC_PINCON_BASE) + +#ifdef __cplusplus +} +#endif + +#endif