Fork of mbed-dev build 137, last build before FAT file system appears to be broken. Also reduced HSE timeout time in STM4XX HAL
Fork of mbed-dev by
Diff: targets/TARGET_NORDIC/TARGET_NRF5/i2c_api.c
- Revision:
- 160:d5399cc887bb
- Parent:
- 150:02e0a0aed4ec
- Child:
- 165:e614a9f1c9e2
--- a/targets/TARGET_NORDIC/TARGET_NRF5/i2c_api.c Tue Feb 28 17:13:35 2017 +0000 +++ b/targets/TARGET_NORDIC/TARGET_NRF5/i2c_api.c Tue Mar 14 16:40:56 2017 +0000 @@ -1,5 +1,5 @@ /* - * Copyright (c) 2013 Nordic Semiconductor ASA + * Copyright (c) 2017 Nordic Semiconductor ASA * All rights reserved. * * Redistribution and use in source and binary forms, with or without modification, @@ -43,8 +43,17 @@ #include "mbed_assert.h" #include "mbed_error.h" -#include "nrf_drv_twi.h" +#include "nrf_twi.h" +#include "nrf_drv_common.h" +#include "nrf_drv_config.h" #include "app_util_platform.h" +#include "nrf_gpio.h" +#include "nrf_delay.h" + +// An arbitrary value used as the counter in loops waiting for given event +// (e.g. STOPPED), needed to avoid infinite loops (and not involve any timers +// or tickers). +#define TIMEOUT_VALUE 1000 #if DEVICE_I2C_ASYNCH #define TWI_IDX(obj) ((obj)->i2c.twi_idx) @@ -54,59 +63,36 @@ #define TWI_INFO(obj) (&m_twi_info[TWI_IDX(obj)]) typedef struct { - bool initialized; - nrf_drv_twi_config_t config; - volatile bool transfer_finished; + bool initialized; + uint32_t pselsda; + uint32_t pselscl; + nrf_twi_frequency_t frequency; + bool start_twi; - #if DEVICE_I2C_ASYNCH - volatile uint32_t events; - void (*handler)(void); - uint32_t event_mask; - #endif +#if DEVICE_I2C_ASYNCH + volatile bool active; + uint8_t const *tx; + size_t tx_length; + uint8_t *rx; + size_t rx_length; + bool stop; + + volatile uint32_t events; + void (*handler)(void); + uint32_t evt_mask; +#endif // DEVICE_I2C_ASYNCH } twi_info_t; static twi_info_t m_twi_info[TWI_COUNT]; -static nrf_drv_twi_t const m_twi_instances[TWI_COUNT] = { +static NRF_TWI_Type * const m_twi_instances[TWI_COUNT] = { #if TWI0_ENABLED - NRF_DRV_TWI_INSTANCE(0), + NRF_TWI0, #endif #if TWI1_ENABLED - NRF_DRV_TWI_INSTANCE(1), + NRF_TWI1, #endif }; -static void twi_event_handler(nrf_drv_twi_evt_t const *event, void *context) -{ - twi_info_t * twi_info = TWI_INFO((i2c_t *)context); - twi_info->transfer_finished = true; - -#if DEVICE_I2C_ASYNCH - switch (event->type) { - case NRF_DRV_TWI_EVT_DONE: - twi_info->events |= I2C_EVENT_TRANSFER_COMPLETE; - break; - - case NRF_DRV_TWI_EVT_ADDRESS_NACK: - twi_info->events |= I2C_EVENT_ERROR_NO_SLAVE; - break; - - case NRF_DRV_TWI_EVT_DATA_NACK: - twi_info->events |= I2C_EVENT_ERROR; - break; - } - - if (twi_info->handler) { - twi_info->handler(); - } -#endif // DEVICE_I2C_ASYNCH -} - -static uint8_t twi_address(int i2c_address) -{ - // The TWI driver requires 7-bit slave address (without R/W bit). - return (i2c_address >> 1); -} - void SPI0_TWI0_IRQHandler(void); void SPI1_TWI1_IRQHandler(void); @@ -123,207 +109,580 @@ SPI1_TWI1_IRQn, (uint32_t) SPI1_TWI1_IRQHandler } - #endif + #endif }; +#ifdef NRF51 + #define TWI_IRQ_PRIORITY APP_IRQ_PRIORITY_LOW +#elif defined(NRF52) + #define TWI_IRQ_PRIORITY APP_IRQ_PRIORITY_LOWEST +#endif + + +#if DEVICE_I2C_ASYNCH +static void start_asynch_rx(twi_info_t *twi_info, NRF_TWI_Type *twi) +{ + if (twi_info->rx_length == 1 && twi_info->stop) { + nrf_twi_shorts_set(twi, NRF_TWI_SHORT_BB_STOP_MASK); + } else { + nrf_twi_shorts_set(twi, NRF_TWI_SHORT_BB_SUSPEND_MASK); + } + nrf_twi_task_trigger(twi, NRF_TWI_TASK_STARTRX); +} + +static void twi_irq_handler(uint8_t instance_idx) +{ + twi_info_t *twi_info = &m_twi_info[instance_idx]; + + NRF_TWI_Type *twi = m_twi_instances[instance_idx]; + if (nrf_twi_event_check(twi, NRF_TWI_EVENT_ERROR)) { + nrf_twi_event_clear(twi, NRF_TWI_EVENT_ERROR); + + // In case of an error, force STOP. + // The current transfer may be suspended (if it is RX), so it must be + // resumed before the STOP task is triggered. + nrf_twi_task_trigger(twi, NRF_TWI_TASK_RESUME); + nrf_twi_task_trigger(twi, NRF_TWI_TASK_STOP); + + uint32_t errorsrc = nrf_twi_errorsrc_get_and_clear(twi); + twi_info->events |= I2C_EVENT_ERROR; + if (errorsrc & NRF_TWI_ERROR_ADDRESS_NACK) { + twi_info->events |= I2C_EVENT_ERROR_NO_SLAVE; + } + if (errorsrc & NRF_TWI_ERROR_DATA_NACK) { + twi_info->events |= I2C_EVENT_TRANSFER_EARLY_NACK; + } + } + + bool finished = false; + + if (nrf_twi_event_check(twi, NRF_TWI_EVENT_TXDSENT)) { + nrf_twi_event_clear(twi, NRF_TWI_EVENT_TXDSENT); + + MBED_ASSERT(twi_info->tx_length > 0); + --(twi_info->tx_length); + // Send next byte if there is still something to be sent. + if (twi_info->tx_length > 0) { + nrf_twi_txd_set(twi, *(twi_info->tx)); + ++(twi_info->tx); + // It TX is done, start RX if requested. + } else if (twi_info->rx_length > 0) { + start_asynch_rx(twi_info, twi); + // If there is nothing more to do, finalize the transfer. + } else { + if (twi_info->stop) { + nrf_twi_task_trigger(twi, NRF_TWI_TASK_STOP); + } else { + nrf_twi_task_trigger(twi, NRF_TWI_TASK_SUSPEND); + finished = true; + } + twi_info->events |= I2C_EVENT_TRANSFER_COMPLETE; + } + } + + if (nrf_twi_event_check(twi, NRF_TWI_EVENT_RXDREADY)) { + nrf_twi_event_clear(twi, NRF_TWI_EVENT_RXDREADY); + + MBED_ASSERT(twi_info->rx_length > 0); + *(twi_info->rx) = nrf_twi_rxd_get(twi); + ++(twi_info->rx); + --(twi_info->rx_length); + + if (twi_info->rx_length > 0) { + // If more bytes should be received, resume the transfer + // (in case the stop condition should be generated after the next + // byte, change the shortcuts configuration first). + if (twi_info->rx_length == 1 && twi_info->stop) { + nrf_twi_shorts_set(twi, NRF_TWI_SHORT_BB_STOP_MASK); + } + nrf_twi_task_trigger(twi, NRF_TWI_TASK_RESUME); + } else { + // If all requested bytes were received, finalize the transfer. + finished = true; + twi_info->events |= I2C_EVENT_TRANSFER_COMPLETE; + } + } + + if (finished || + nrf_twi_event_check(twi, NRF_TWI_EVENT_STOPPED) || + (nrf_twi_int_enable_check(twi, NRF_TWI_INT_SUSPENDED_MASK) && + nrf_twi_event_check(twi, NRF_TWI_EVENT_SUSPENDED))) { + // There is no need to clear the STOPPED and SUSPENDED events here, + // they will no longer generate the interrupt - see below. + + nrf_twi_shorts_set(twi, 0); + // Disable all interrupt sources. + nrf_twi_int_disable(twi, UINT32_MAX); + twi_info->active = false; + + if (twi_info->handler) { + twi_info->handler(); + } + } +} + +#if TWI0_ENABLED +static void irq_handler_twi0(void) +{ + twi_irq_handler(TWI0_INSTANCE_INDEX); +} +#endif +#if TWI1_ENABLED +static void irq_handler_twi1(void) +{ + twi_irq_handler(TWI1_INSTANCE_INDEX); +} +#endif +static nrf_drv_irq_handler_t const m_twi_irq_handlers[TWI_COUNT] = +{ +#if TWI0_ENABLED + irq_handler_twi0, +#endif +#if TWI1_ENABLED + irq_handler_twi1, +#endif +}; +#endif // DEVICE_I2C_ASYNCH + + +static void configure_twi_pin(uint32_t pin, nrf_gpio_pin_dir_t dir) +{ + nrf_gpio_cfg(pin, + dir, + NRF_GPIO_PIN_INPUT_CONNECT, + NRF_GPIO_PIN_PULLUP, + NRF_GPIO_PIN_S0D1, + NRF_GPIO_PIN_NOSENSE); +} + +static void twi_clear_bus(twi_info_t *twi_info) +{ + // Try to set SDA high, and check if no slave tries to drive it low. + nrf_gpio_pin_set(twi_info->pselsda); + configure_twi_pin(twi_info->pselsda, NRF_GPIO_PIN_DIR_OUTPUT); + // In case SDA is low, make up to 9 cycles on SCL line to help the slave + // that pulls SDA low release it. + if (!nrf_gpio_pin_read(twi_info->pselsda)) { + nrf_gpio_pin_set(twi_info->pselscl); + configure_twi_pin(twi_info->pselscl, NRF_GPIO_PIN_DIR_OUTPUT); + nrf_delay_us(4); + + for (int i = 0; i < 9; i++) { + if (nrf_gpio_pin_read(twi_info->pselsda)) { + break; + } + nrf_gpio_pin_clear(twi_info->pselscl); + nrf_delay_us(4); + nrf_gpio_pin_set(twi_info->pselscl); + nrf_delay_us(4); + } + + // Finally, generate STOP condition to put the bus into initial state. + nrf_gpio_pin_clear(twi_info->pselsda); + nrf_delay_us(4); + nrf_gpio_pin_set(twi_info->pselsda); + } +} void i2c_init(i2c_t *obj, PinName sda, PinName scl) { int i; for (i = 0; i < TWI_COUNT; ++i) { if (m_twi_info[i].initialized && - m_twi_info[i].config.sda == (uint32_t)sda && - m_twi_info[i].config.scl == (uint32_t)scl) { + m_twi_info[i].pselsda == (uint32_t)sda && + m_twi_info[i].pselscl == (uint32_t)scl) { TWI_IDX(obj) = i; - TWI_INFO(obj)->config.frequency = NRF_TWI_FREQ_100K; + TWI_INFO(obj)->frequency = NRF_TWI_FREQ_100K; i2c_reset(obj); return; } } - nrf_drv_twi_config_t const config = { - .scl = scl, - .sda = sda, - .frequency = NRF_TWI_FREQ_100K, -#ifdef NRF51 - .interrupt_priority = APP_IRQ_PRIORITY_LOW -#elif defined(NRF52) - .interrupt_priority = APP_IRQ_PRIORITY_LOWEST -#endif - - }; - for (i = 0; i < TWI_COUNT; ++i) { if (!m_twi_info[i].initialized) { + TWI_IDX(obj) = i; - NVIC_SetVector(twi_handlers[i].IRQn, twi_handlers[i].vector); + twi_info_t *twi_info = TWI_INFO(obj); + twi_info->initialized = true; + twi_info->pselsda = (uint32_t)sda; + twi_info->pselscl = (uint32_t)scl; + twi_info->frequency = NRF_TWI_FREQ_100K; + twi_info->start_twi = false; +#if DEVICE_I2C_ASYNCH + twi_info->active = false; +#endif + + twi_clear_bus(twi_info); - nrf_drv_twi_t const *twi = &m_twi_instances[i]; - ret_code_t ret_code = - nrf_drv_twi_init(twi, &config, twi_event_handler, obj); - if (ret_code == NRF_SUCCESS) { - TWI_IDX(obj) = i; - TWI_INFO(obj)->initialized = true; - TWI_INFO(obj)->config = config; + configure_twi_pin(twi_info->pselsda, NRF_GPIO_PIN_DIR_INPUT); + configure_twi_pin(twi_info->pselscl, NRF_GPIO_PIN_DIR_INPUT); + + i2c_reset(obj); - nrf_drv_twi_enable(twi); - return; - } +#if DEVICE_I2C_ASYNCH + nrf_drv_common_per_res_acquire(m_twi_instances[i], + m_twi_irq_handlers[i]); + NVIC_SetVector(twi_handlers[i].IRQn, twi_handlers[i].vector); + nrf_drv_common_irq_enable(twi_handlers[i].IRQn, TWI_IRQ_PRIORITY); +#endif + + return; } } - // No available peripheral error("No available I2C peripheral\r\n"); } void i2c_reset(i2c_t *obj) { twi_info_t *twi_info = TWI_INFO(obj); - nrf_drv_twi_t const *twi = &m_twi_instances[TWI_IDX(obj)]; + NRF_TWI_Type *twi = m_twi_instances[TWI_IDX(obj)]; - nrf_drv_twi_uninit(twi); - nrf_drv_twi_init(twi, &twi_info->config, twi_event_handler, obj); - nrf_drv_twi_enable(twi); + nrf_twi_disable(twi); + nrf_twi_pins_set(twi, twi_info->pselscl, twi_info->pselsda); + nrf_twi_frequency_set(twi, twi_info->frequency); + nrf_twi_enable(twi); } int i2c_start(i2c_t *obj) { - (void)obj; + twi_info_t *twi_info = TWI_INFO(obj); +#if DEVICE_I2C_ASYNCH + if (twi_info->active) { + return I2C_ERROR_BUS_BUSY; + } +#endif + twi_info->start_twi = true; - return -1; // Not implemented. + return 0; } int i2c_stop(i2c_t *obj) { - (void)obj; + NRF_TWI_Type *twi = m_twi_instances[TWI_IDX(obj)]; - return -1; // Not implemented. + // The current transfer may be suspended (if it is RX), so it must be + // resumed before the STOP task is triggered. + nrf_twi_task_trigger(twi, NRF_TWI_TASK_RESUME); + nrf_twi_task_trigger(twi, NRF_TWI_TASK_STOP); + uint32_t remaining_time = TIMEOUT_VALUE; + do { + if (nrf_twi_event_check(twi, NRF_TWI_EVENT_STOPPED)) { + return 0; + } + } while (--remaining_time); + + return 1; } void i2c_frequency(i2c_t *obj, int hz) { twi_info_t *twi_info = TWI_INFO(obj); - nrf_drv_twi_t const *twi = &m_twi_instances[TWI_IDX(obj)]; + NRF_TWI_Type *twi = m_twi_instances[TWI_IDX(obj)]; if (hz < 250000) { - twi_info->config.frequency = NRF_TWI_FREQ_100K; + twi_info->frequency = NRF_TWI_FREQ_100K; } else if (hz < 400000) { - twi_info->config.frequency = NRF_TWI_FREQ_250K; + twi_info->frequency = NRF_TWI_FREQ_250K; } else { - twi_info->config.frequency = NRF_TWI_FREQ_400K; + twi_info->frequency = NRF_TWI_FREQ_400K; } - nrf_twi_frequency_set(twi->reg.p_twi, twi_info->config.frequency); + nrf_twi_frequency_set(twi, twi_info->frequency); +} + +static uint8_t twi_address(int i2c_address) +{ + // The TWI peripheral requires 7-bit slave address (without R/W bit). + return (i2c_address >> 1); +} + +static void start_twi_read(NRF_TWI_Type *twi, int address) +{ + nrf_twi_event_clear(twi, NRF_TWI_EVENT_STOPPED); + nrf_twi_event_clear(twi, NRF_TWI_EVENT_RXDREADY); + nrf_twi_event_clear(twi, NRF_TWI_EVENT_ERROR); + (void)nrf_twi_errorsrc_get_and_clear(twi); + + nrf_twi_shorts_set(twi, NRF_TWI_SHORT_BB_SUSPEND_MASK); + + nrf_twi_address_set(twi, twi_address(address)); + nrf_twi_task_trigger(twi, NRF_TWI_TASK_RESUME); + nrf_twi_task_trigger(twi, NRF_TWI_TASK_STARTRX); } int i2c_read(i2c_t *obj, int address, char *data, int length, int stop) { - (void)stop; + // Zero-length RX transfers are not supported. Such transfers cannot + // be easily achieved with TWI peripheral (some dirty tricks would be + // required for this), and they are actually useless (TX can be used + // to check if the address is acknowledged by a slave). + MBED_ASSERT(length > 0); twi_info_t *twi_info = TWI_INFO(obj); - nrf_drv_twi_t const *twi = &m_twi_instances[TWI_IDX(obj)]; +#if DEVICE_I2C_ASYNCH + if (twi_info->active) { + return I2C_ERROR_BUS_BUSY; + } +#endif + twi_info->start_twi = false; + + NRF_TWI_Type *twi = m_twi_instances[TWI_IDX(obj)]; + start_twi_read(twi, address); + + int result = length; + while (length > 0) { + int byte_read_result = i2c_byte_read(obj, (stop && length == 1)); + if (byte_read_result < 0) { + // When an error occurs, return the number of bytes that have been + // received successfully. + result -= length; + // Force STOP condition. + stop = 1; + break; + } + *data++ = (uint8_t)byte_read_result; + --length; + } + + if (stop) { + (void)i2c_stop(obj); + } + + return result; +} - twi_info->transfer_finished = false; - ret_code_t ret_code = nrf_drv_twi_rx(twi, twi_address(address), - (uint8_t *)data, length); - if (ret_code != NRF_SUCCESS) { - return 0; - } - while (!twi_info->transfer_finished) {} - return nrf_drv_twi_data_count_get(twi); +static uint8_t twi_byte_write(NRF_TWI_Type *twi, uint8_t data) +{ + nrf_twi_event_clear(twi, NRF_TWI_EVENT_TXDSENT); + nrf_twi_event_clear(twi, NRF_TWI_EVENT_ERROR); + + nrf_twi_txd_set(twi, data); + uint32_t remaining_time = TIMEOUT_VALUE; + do { + if (nrf_twi_event_check(twi, NRF_TWI_EVENT_TXDSENT)) { + nrf_twi_event_clear(twi, NRF_TWI_EVENT_TXDSENT); + return 1; // ACK received + } + if (nrf_twi_event_check(twi, NRF_TWI_EVENT_ERROR)) { + nrf_twi_event_clear(twi, NRF_TWI_EVENT_ERROR); + return 0; // some error occurred + } + } while (--remaining_time); + + return 2; // timeout; +} + +static void start_twi_write(NRF_TWI_Type *twi, int address) +{ + nrf_twi_event_clear(twi, NRF_TWI_EVENT_STOPPED); + nrf_twi_event_clear(twi, NRF_TWI_EVENT_TXDSENT); + nrf_twi_event_clear(twi, NRF_TWI_EVENT_ERROR); + (void)nrf_twi_errorsrc_get_and_clear(twi); + + nrf_twi_shorts_set(twi, 0); + + nrf_twi_address_set(twi, twi_address(address)); + nrf_twi_task_trigger(twi, NRF_TWI_TASK_RESUME); + nrf_twi_task_trigger(twi, NRF_TWI_TASK_STARTTX); } int i2c_write(i2c_t *obj, int address, const char *data, int length, int stop) { twi_info_t *twi_info = TWI_INFO(obj); - nrf_drv_twi_t const *twi = &m_twi_instances[TWI_IDX(obj)]; +#if DEVICE_I2C_ASYNCH + if (twi_info->active) { + return I2C_ERROR_BUS_BUSY; + } +#endif + twi_info->start_twi = false; + + NRF_TWI_Type *twi = m_twi_instances[TWI_IDX(obj)]; + start_twi_write(twi, address); + + // Special case - transaction with no data. + // It can be used to check if a slave acknowledges the address. + if (length == 0) { + nrf_twi_event_t event; + if (stop) { + event = NRF_TWI_EVENT_STOPPED; + nrf_twi_task_trigger(twi, NRF_TWI_TASK_STOP); + } else { + event = NRF_TWI_EVENT_SUSPENDED; + nrf_twi_event_clear(twi, event); + nrf_twi_task_trigger(twi, NRF_TWI_TASK_SUSPEND); + } + uint32_t remaining_time = TIMEOUT_VALUE; + do { + if (nrf_twi_event_check(twi, event)) { + break; + } + } while (--remaining_time); - twi_info->transfer_finished = false; - ret_code_t ret_code = nrf_drv_twi_tx(twi, twi_address(address), - (uint8_t const *)data, length, (stop == 0)); - if (ret_code != NRF_SUCCESS) { - return 0; + uint32_t errorsrc = nrf_twi_errorsrc_get_and_clear(twi); + if (errorsrc & NRF_TWI_ERROR_ADDRESS_NACK) { + if (!stop) { + i2c_stop(obj); + } + return I2C_ERROR_NO_SLAVE; + } + + return (remaining_time ? 0 : I2C_ERROR_BUS_BUSY); } - while (!twi_info->transfer_finished) {} - return nrf_drv_twi_data_count_get(twi); + + int result = length; + do { + uint8_t byte_write_result = twi_byte_write(twi, (uint8_t)*data++); + if (byte_write_result != 1) { + if (byte_write_result == 0) { + // Check what kind of error has been signaled by TWI. + uint32_t errorsrc = nrf_twi_errorsrc_get_and_clear(twi); + if (errorsrc & NRF_TWI_ERROR_ADDRESS_NACK) { + result = I2C_ERROR_NO_SLAVE; + } else { + // Some other error - return the number of bytes that + // have been sent successfully. + result -= length; + } + } else { + result = I2C_ERROR_BUS_BUSY; + } + // Force STOP condition. + stop = 1; + break; + } + --length; + } while (length > 0); + + if (stop) { + (void)i2c_stop(obj); + } + + return result; } int i2c_byte_read(i2c_t *obj, int last) { - (void)obj; - (void)last; + NRF_TWI_Type *twi = m_twi_instances[TWI_IDX(obj)]; + + if (last) { + nrf_twi_shorts_set(twi, NRF_TWI_SHORT_BB_STOP_MASK); + } + nrf_twi_task_trigger(twi, NRF_TWI_TASK_RESUME); - return -1; // Not implemented. + uint32_t remaining_time = TIMEOUT_VALUE; + do { + if (nrf_twi_event_check(twi, NRF_TWI_EVENT_RXDREADY)) { + nrf_twi_event_clear(twi, NRF_TWI_EVENT_RXDREADY); + return nrf_twi_rxd_get(twi); + } + if (nrf_twi_event_check(twi, NRF_TWI_EVENT_ERROR)) { + nrf_twi_event_clear(twi, NRF_TWI_EVENT_ERROR); + return I2C_ERROR_NO_SLAVE; + } + } while (--remaining_time); + + return I2C_ERROR_BUS_BUSY; } int i2c_byte_write(i2c_t *obj, int data) { - (void)obj; - (void)data; + NRF_TWI_Type *twi = m_twi_instances[TWI_IDX(obj)]; + twi_info_t *twi_info = TWI_INFO(obj); + if (twi_info->start_twi) { + twi_info->start_twi = false; - return -1; // Not implemented. + if (data & 1) { + start_twi_read(twi, data); + } else { + start_twi_write(twi, data); + } + return 1; + } else { + nrf_twi_task_trigger(twi, NRF_TWI_TASK_RESUME); + // 0 - TWI signaled error (NAK is the only possibility here) + // 1 - ACK received + // 2 - timeout (clock stretched for too long?) + return twi_byte_write(twi, (uint8_t)data); + } } #if DEVICE_I2C_ASYNCH - void i2c_transfer_asynch(i2c_t *obj, const void *tx, size_t tx_length, void *rx, size_t rx_length, uint32_t address, uint32_t stop, uint32_t handler, uint32_t event, DMAUsage hint) { - (void)stop; (void)hint; - if (i2c_active(obj)) { - return; - } - if ((tx_length == 0) && (rx_length == 0)) { - return; - } - twi_info_t *twi_info = TWI_INFO(obj); - twi_info->events = 0; - twi_info->handler = (void (*)(void))handler; - twi_info->event_mask = event; + if (twi_info->active) { + return; + } + twi_info->active = true; + twi_info->events = 0; + twi_info->handler = (void (*)(void))handler; + twi_info->evt_mask = event; + twi_info->tx_length = tx_length; + twi_info->tx = tx; + twi_info->rx_length = rx_length; + twi_info->rx = rx; + twi_info->stop = stop; - uint8_t twi_addr = twi_address(address); - nrf_drv_twi_t const *twi = &m_twi_instances[TWI_IDX(obj)]; + NRF_TWI_Type *twi = m_twi_instances[TWI_IDX(obj)]; + + nrf_twi_event_clear(twi, NRF_TWI_EVENT_TXDSENT); + nrf_twi_event_clear(twi, NRF_TWI_EVENT_RXDREADY); + nrf_twi_event_clear(twi, NRF_TWI_EVENT_STOPPED); + nrf_twi_event_clear(twi, NRF_TWI_EVENT_SUSPENDED); + nrf_twi_event_clear(twi, NRF_TWI_EVENT_ERROR); + (void)nrf_twi_errorsrc_get_and_clear(twi); - if ((tx_length > 0) && (rx_length == 0)) { - nrf_drv_twi_xfer_desc_t const xfer = - NRF_DRV_TWI_XFER_DESC_TX(twi_addr, (uint8_t *)tx, tx_length); - nrf_drv_twi_xfer(twi, &xfer, - stop ? 0 : NRF_DRV_TWI_FLAG_TX_NO_STOP); + nrf_twi_address_set(twi, twi_address(address)); + nrf_twi_task_trigger(twi, NRF_TWI_TASK_RESUME); + // TX only, or TX + RX (after a repeated start). + if (tx_length > 0) { + nrf_twi_task_trigger(twi, NRF_TWI_TASK_STARTTX); + nrf_twi_txd_set(twi, *(twi_info->tx)); + ++(twi_info->tx); + // RX only. + } else if (rx_length > 0) { + start_asynch_rx(twi_info, twi); + // Both 'tx_length' and 'rx_length' are 0 - this case may be used + // to test if the slave is presentand ready for transfer (by just + // sending the address and checking if it is acknowledged). + } else { + nrf_twi_task_trigger(twi, NRF_TWI_TASK_STARTTX); + if (stop) { + nrf_twi_task_trigger(twi, NRF_TWI_TASK_STOP); + } else { + nrf_twi_task_trigger(twi, NRF_TWI_TASK_SUSPEND); + nrf_twi_int_enable(twi, NRF_TWI_INT_SUSPENDED_MASK); + } + twi_info->events |= I2C_EVENT_TRANSFER_COMPLETE; } - else if ((tx_length == 0) && (rx_length > 0)) { - nrf_drv_twi_xfer_desc_t const xfer = - NRF_DRV_TWI_XFER_DESC_RX(twi_addr, rx, rx_length); - nrf_drv_twi_xfer(twi, &xfer, 0); - } - else if ((tx_length > 0) && (rx_length > 0)) { - nrf_drv_twi_xfer_desc_t const xfer = - NRF_DRV_TWI_XFER_DESC_TXRX(twi_addr, - (uint8_t *)tx, tx_length, rx, rx_length); - nrf_drv_twi_xfer(twi, &xfer, 0); - } + + nrf_twi_int_enable(twi, NRF_TWI_INT_TXDSENT_MASK | + NRF_TWI_INT_RXDREADY_MASK | + NRF_TWI_INT_STOPPED_MASK | + NRF_TWI_INT_ERROR_MASK); } uint32_t i2c_irq_handler_asynch(i2c_t *obj) { twi_info_t *twi_info = TWI_INFO(obj); - return (twi_info->events & twi_info->event_mask); + return (twi_info->events & twi_info->evt_mask); } uint8_t i2c_active(i2c_t *obj) { - nrf_drv_twi_t const *twi = &m_twi_instances[TWI_IDX(obj)]; - return nrf_drv_twi_is_busy(twi); + twi_info_t *twi_info = TWI_INFO(obj); + return twi_info->active; } void i2c_abort_asynch(i2c_t *obj) { i2c_reset(obj); } - #endif // DEVICE_I2C_ASYNCH #endif // DEVICE_I2C