KSM edits to RA8875

Dependents:   Liz_Test_Code

Revision:
165:695c24cc5197
Child:
166:53fd4a876dac
diff -r 76edd7d9cb68 -r 695c24cc5197 RA8875_Touch_FT5206.h
--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/RA8875_Touch_FT5206.h	Sun Feb 24 00:40:00 2019 +0000
@@ -0,0 +1,100 @@
+/// FT5206 Touch Controller definitions
+///
+/// 
+
+#ifndef RA8875_TOUCH_FT5206_H
+#define RA8875_TOUCH_FT5206_H
+
+/// FT5206 definitions follow
+#define FT5206_I2C_FREQUENCY                400000
+#define FT5206_I2C_ADDRESS                  0x38
+
+#define FT5206_NUMBER_OF_REGISTERS          31   // there are more registers, but this
+                                                 // is enough to get all 5 touch coordinates.
+
+#define FT5206_NUMBER_OF_TOTAL_REGISTERS    0xFE
+
+#define FT5206_DEVICE_MODE                  0x00 // Normal, test, etc.
+#define FT5206_GEST_ID                      0x01 // Gesture detected
+#define FT5206_TD_STATUS                    0x02 // How many points detected (3:0). 1-5 is valid.
+
+#define FT5206_TOUCH1_XH                    0x03 // Event Flag, Touch X Position
+#define FT5206_TOUCH1_XL                    0x04
+#define FT5206_TOUCH1_YH                    0x05 // Touch ID, Touch Y Position
+#define FT5206_TOUCH1_YL                    0x06
+
+#define FT5206_TOUCH2_XH                    0x09 // Event Flag, Touch X Position
+#define FT5206_TOUCH2_XL                    0x0a
+#define FT5206_TOUCH2_YH                    0x0b // Touch ID, Touch Y Position
+#define FT5206_TOUCH2_YL                    0x0c
+
+#define FT5206_TOUCH3_XH                    0x0f // Event Flag, Touch X Position
+#define FT5206_TOUCH3_XL                    0x10
+#define FT5206_TOUCH3_YH                    0x11 // Touch ID, Touch Y Position
+#define FT5206_TOUCH3_YL                    0x12
+
+#define FT5206_TOUCH4_XH                    0x15 // Event Flag, Touch X Position
+#define FT5206_TOUCH4_XL                    0x16
+#define FT5206_TOUCH4_YH                    0x17 // Touch ID, Touch Y Position
+#define FT5206_TOUCH4_YL                    0x18
+
+#define FT5206_TOUCH5_XH                    0x1b // Event Flag, Touch X Position
+#define FT5206_TOUCH5_XL                    0x1c
+#define FT5206_TOUCH5_YH                    0x1d // Touch ID, Touch Y Position
+#define FT5206_TOUCH5_YL                    0x1e
+
+// For typical usage, the registers listed below are not used.
+#define FT5206_ID_G_THGROUP                 0x80 // Valid touching detect threshold
+#define FT5206_ID_G_THPEAK                  0x81 // Valid touching peak detect threshold
+#define FT5206_ID_G_THCAL                   0x82 // The threshold when calculating the focus of touching
+#define FT5206_ID_G_THWATER                 0x83 // The threshold when there is surface water
+#define FT5206_ID_G_THTEMP                  0x84 // The threshold of temperature compensation
+#define FT5206_ID_G_CTRL                    0x86 // Power control mode
+#define FT5206_ID_G_TIME_ENTER_MONITOR      0x87 // The timer of entering monitor status
+#define FT5206_ID_G_PERIODACTIVE            0x88 // Period Active
+#define FT5206_ID_G_PERIODMONITOR           0x89 // The timer of entering idle while in monitor status
+#define FT5206_ID_G_AUTO_CLB_MODE           0xA0 // Auto calibration mode
+
+#define FT5206_TOUCH_LIB_VERSION_H          0xA1 // Firmware Library Version H byte
+#define FT5206_TOUCH_LIB_VERSION_L          0xA2 // Firmware Library Version L byte
+#define FT5206_ID_G_CIPHER                  0xA3 // Chip vendor ID
+#define FT5206_G_MODE                       0xA4 // The interrupt status to host
+#define FT5206_ID_G_PMODE                   0xA5 // Power Consume Mode
+#define FT5206_FIRMID                       0xA6 // Firmware ID
+#define FT5206_ID_G_STATE                   0xA7 // Running State
+#define FT5206_ID_G_FT5201ID                0xA8 // CTPM Vendor ID
+#define FT5206_ID_G_ERR                     0xA9 // Error Code
+#define FT5206_ID_G_CLB                     0xAA // Configure TP module during calibration in Test Mode
+#define FT5206_ID_G_B_AREA_TH               0xAE // The threshold of big area
+#define FT5206_LOG_MSG_CNT                  0xFE // The log MSG count
+#define FT5206_LOG_CUR_CHA                  0xFF // Current character of log message, will point to the next
+                                                 // character when one character is read.
+#define FT5206_GEST_ID_MOVE_UP              0x10
+#define FT5206_GEST_ID_MOVE_LEFT            0x14
+#define FT5206_GEST_ID_MOVE_DOWN            0x18
+#define FT5206_GEST_ID_MOVE_RIGHT           0x1c
+#define FT5206_GEST_ID_ZOOM_IN              0x48
+#define FT5206_GEST_ID_ZOOM_OUT             0x49
+#define FT5206_GEST_ID_NO_GESTURE           0x00
+
+#define FT5206_EVENT_FLAG_PUT_DOWN          0x00
+#define FT5206_EVENT_FLAG_PUT_UP            0x01
+#define FT5206_EVENT_FLAG_CONTACT           0x02
+#define FT5206_EVENT_FLAG_RESERVED          0x03
+
+#define FT5206_ID_G_POLLING_MODE            0x00
+#define FT5206_ID_G_TRIGGER_MODE            0x01
+
+#define FT5206_ID_G_PMODE_ACTIVE            0x00
+#define FT5206_ID_G_PMODE_MONITOR           0x01
+#define FT5206_ID_G_PMODE_HIBERNATE         0x03
+
+#define FT5206_ID_G_STATE_CONFIGURE         0x00
+#define FT5206_ID_G_STATE_WORK              0x01
+#define FT5206_ID_G_STATE_CALIBRATION       0x02
+#define FT5206_ID_G_STATE_FACTORY           0x03
+#define FT5206_ID_G_STATE_AUTO_CALIBRATION  0x04
+
+/// end of FT5206 definitions
+
+#endif // RA8875_TOUCH_FT5206_H