Diff: main.cpp

Revision:

8:7b033903c8fb

Parent:

7:0c09d29c4cf3

Child:

9:e98e94ba17f9

--- a/main.cpp	Wed Oct 22 00:41:14 2014 +0000
+++ b/main.cpp	Sat Nov 22 23:09:17 2014 +0000
@@ -1,11 +1,11 @@
 /*
- * mbed Application program / Frequency Counter
+ * mbed Application program / Frequency Counter with GPS 1PPS Compensation
  *
  * Copyright (c) 2014 Kenji Arai / JH1PJL
  *  http://www.page.sannet.ne.jp/kenjia/index.html
  *  http://mbed.org/users/kenjiArai/
  *      Created: October   18th, 2014
- *      Revised: October   22nd, 2014
+ *      Revised: Nobember  23rd, 2014
  *
  * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR IMPLIED,
  * INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE
@@ -15,18 +15,12 @@
  */
 
 #define USE_COM         // use Communication with PC(UART)
-#define USE_TEXT_LCD    // use Text LCD/I2C Interface
-#define USE_GRAP_LCD    // use Grafic LCD/SPI interface
 
 //  Include ---------------------------------------------------------------------------------------
 #include "mbed.h"
-#include "freq_counter.h"
-#if defined(USE_TEXT_LCD)
-#include "TextLCD.h"            // Std. lib./ LCD control
-#endif
-#if defined(USE_GRAP_LCD)
-#include "ST7565_SPI_LCD.h"
-#endif
+#include "frq_cuntr_full.h"
+
+using namespace Frequency_counter;
 
 //  Definition ------------------------------------------------------------------------------------
 #ifdef USE_COM
@@ -43,89 +37,17 @@
 #define READABLE(x)     {;}
 #endif
 
-#if defined(TARGET_LPC1768)
-// LPC1768 Frequency example
-// Outout mbed's "PWM6" pin to 96MHZ/19 = 5.052MHz (Approx)
-#define CLK_REFRENCE()  PWM6_SETCLK(19)
-// Outout mbed's "PWM6" pin to 96MHZ/96 = 1.000MHz (Approx)
-//#define CLK_REFRENCE()    PWM6_SETCLK(96)
-#elif defined(TARGET_LPC1114)
-#define led_not_zero    temp_ram
-#define led_01          temp_ram
-#define led_10          temp_ram
-#define CLK_REFRENCE()  clock_out()
-#warning "Don't forget LPC1114 runs with internal clock. Measurement data is not accurate!!"
-#elif defined(TARGET_NUCLEO_F401RE) || defined(TARGET_NUCLEO_F411RE)
-#define led_not_zero    temp_ram
-#define led_01          temp_ram
-#define led_10          temp_ram
-#define CLK_REFRENCE()  port_mco1_mco2_set()
-#else
-#error "No support for this CPU"
-#endif
-
 //  Object ----------------------------------------------------------------------------------------
-#if defined(TARGET_LPC1768)
-
-DigitalOut led_gate(LED1);
-DigitalOut led_not_zero(LED2);
-DigitalOut led_01(LED3);
-DigitalOut led_10(LED4);
-DigitalIn  sw_01(p19);
-DigitalIn  sw_10(p20);
-Serial pc(USBTX, USBRX);
-I2C i2cBus(p9, p10);   // SDA, SCL
-#if defined(USE_TEXT_LCD)
-TextLCD_I2C_N lcd(&i2cBus, 0x7c, TextLCD::LCD8x2);  // LCD(Akizuki AQM0802A)
-#endif
-#if defined(USE_GRAP_LCD)
-ST7565 glcd(p5, p7, p19, p8, p20, ST7565::AD12864SPI); // mosi, sck, reset, a0, ncs
-#endif
-PwmOut fmclck(p21);                 // for RESERVE pin21 as PWM1[6]
-F_COUNTER fc(p30);
-
-#elif defined(TARGET_LPC1114)
-
-DigitalOut led_gate(LED2);
-DigitalIn  sw_01(dp25);
-DigitalIn  sw_10(dp26);
-Serial pc(dp16,dp15);       // Communication with Host
-I2C i2cBus(dp5,dp27);       // SDA, SCL
-#if defined(USE_TEXT_LCD)
-TextLCD_I2C_N lcd(&i2cBus, 0x7c, TextLCD::LCD8x2);  // LCD(Akizuki AQM0802A)
-#endif
-#if defined(USE_GRAP_LCD)
-ST7565 glcd(dp2, dp6, dp10, dp4, dp9, ST7565::AQM1248A); // mosi, sck, reset, a0, ncs
-#endif
-F_COUNTER fc(dp14);
-// dp24 uses for CLOCKOUT -> Clock output for checking
-
-#elif defined(TARGET_NUCLEO_F401RE) || defined(TARGET_NUCLEO_F411RE)
-
-DigitalOut led_gate(LED1);
-DigitalIn  sw_01(PC_0);
-DigitalIn  sw_10(PC_1);
-Serial pc(USBTX, USBRX);
-I2C i2cBus(PB_9,PB_8);  // SDA, SCL
-#if defined(USE_TEXT_LCD)
-TextLCD_I2C_N lcd(&i2cBus, 0x7c, TextLCD::LCD8x2);  // LCD(Akizuki AQM0802A)
-#endif
-#if defined(USE_GRAP_LCD)
-ST7565 glcd(PB_5, PB_3, PA_10, PB_10, PA_9, ST7565::AD12864SPI); // mosi, sck, reset, a0, ncs
-#endif
-F_COUNTER fc(PA_0);
-// PA8 & PC9 uses for MCO_1 % MCO_2 -> Clock output for checking
-
-#else
-#error "No support for this CPU"
-#endif
+//DigitalOut led_gate(LED1);
+DigitalIn   sw_01(PC_0);
+DigitalIn   sw_10(PC_1);
+Serial      pc(USBTX, USBRX);
+I2C         i2cBus(PB_9,PB_8);  // SDA, SCL
+// PC_6,PC_7 & PB6 use for Timer3 & 4
+// PA_0,PA_1 & PB_10 use for Timer2
+FRQ_CUNTR   fc(PC_6, 1.0);      // Input port & gate time[sec]
 
 //  RAM -------------------------------------------------------------------------------------------
-float freqency;
-double t_gate;
-uint8_t sw;
-
-uint32_t temp_ram;  // dummy ram (please keep it!)
 
 //  ROM / Constant data ---------------------------------------------------------------------------
 
@@ -136,201 +58,27 @@
 //-------------------------------------------------------------------------------------------------
 //  Control Program
 //-------------------------------------------------------------------------------------------------
-#if defined(TARGET_LPC1768)
-
-// Clock Output From pin21(PWM6)
-// Set Clock Freq with div.
-// if mbed is running at 96MHz, div is set 96 to Get 1MHz.
-void PWM6_SETCLK(int div)
-{
-    LPC_PWM1->TCR = (1 << 1);           // 1)Reset counter, disable PWM
-    LPC_SC->PCLKSEL0 &= ~(0x3 << 12);
-    LPC_SC->PCLKSEL0 |= (1 << 12);      // 2)Set peripheral clock divider to /1, i.e. system clock
-    LPC_PWM1->MR0 = div - 1;            // 3)Match Register 0 is shared period counter for all PWM1
-    LPC_PWM1->MR6 = (div + 1)>> 1;      //
-    LPC_PWM1->LER |= 1;                 // 4)Start updating at next period start
-    LPC_PWM1->TCR = (1 << 0) || (1 << 3); // 5)Enable counter and PWM
-}
-
-#elif defined(TARGET_LPC1114)
-
-// CLOCKOUT from pin24(dp18)
-//      Freq = 48MHz/4 = 12MHz
-void clock_out(void)
-{
-    LPC_SYSCON->CLKOUTCLKSEL = 3;       // System clock
-    LPC_SYSCON->CLKOUTDIV = 4;          // div 1/4
-    LPC_IOCON->PIO0_1 = 1;              // select CLKOUT to P0_1(pin24)/dp18
-    LPC_SYSCON->CLKOUTUEN = 1;          // enable output
-}
-
-#elif defined(TARGET_NUCLEO_F401RE) || defined(TARGET_NUCLEO_F411RE)
-
-void port_mco1_mco2_set(void)
-{
-    uint32_t temp = 0x00;
-
-    // PA8 -> MCO_1
-    temp = ((uint32_t)(GPIO_AF0_MCO) << (((uint32_t)8 & (uint32_t)0x07) * 4)) ;
-    GPIOA->AFR[8 >> 3] &= ~((uint32_t)0xf << ((uint32_t)(8 & (uint32_t)0x07) * 4)) ;
-    GPIOA->AFR[8 >> 3] |= temp;
-    GPIOA->MODER &= ~(GPIO_MODER_MODER0 << (8 * 2));
-    GPIOA->MODER |= (0x2 << (8 * 2));
-    // PC9 -> MCO_2
-    temp = ((uint32_t)(GPIO_AF0_MCO) << (((uint32_t)9 & (uint32_t)0x07) * 4)) ;
-    GPIOC->AFR[9 >> 3] &= ~((uint32_t)0xf << ((uint32_t)(9 & (uint32_t)0x07) * 4)) ;
-    GPIOC->AFR[9 >> 3] |= temp;
-    GPIOC->MODER &= ~(GPIO_MODER_MODER0 << (9 * 2));
-    GPIOC->MODER |= (0x2 << (9 * 2));
-    // Select output clock source
-    RCC->CFGR &= 0x009fffff;
-    // MC0_1 output HSE 1/4, MCO_2 output SYSCLK 1/4
-    //             MCO2          MCO2PRE       MCO1PRE       MCO1
-    RCC->CFGR |= (0x0 << 30) + (0x6 << 27) + (0x6 << 24) + (0x3 << 22);
-}
-
-#else
-#error "No support for this CPU"
-#endif
-
-void read_sw_and_set_gate_time(void)
-{
-    if (sw_10) {
-        led_10 = 1;
-        sw = 2;
-    } else {
-        led_10 = 0;
-        sw = 0;
-    }
-    if (sw_01) {
-        led_01 = 1;
-        sw += 1;
-    } else {
-        led_01 = 0;
-    }
-    switch (sw) {
-        case 0:
-            t_gate = 0.001;
-            break;
-        case 1:
-            t_gate = 0.01;
-            break;
-        case 2:
-            t_gate = 0.1;
-            break;
-        case 3:
-        default:
-            t_gate = 1.0;
-            break;
-    }
-}
-
 int main()
 {
+    uint32_t counter_1pps = 0;
+    uint32_t new_frequency = 0;
+
+    BAUD(9600);
+    // PA8 & PC9 uses for MCO_1 & MCO_2 -> Clock output for checking
+    fc.port_mco1_mco2_set(2);      // Clk/2 ->1/1(100MHz) cannot measure!!
+    wait(1.0);
+    fc.read_frequency_TIM2(1.0);
+    fc.read_frequency_TIM3P4(1.0);
     PRINTF("\r\nFrequency Counter by JH1PJL created on "__DATE__"\r\n");
-    t_gate = 1.0;
-    // Initialize LCD
-#if defined(USE_TEXT_LCD)
-    lcd.locate(0, 0);    // 1st line top
-    //          12345678
-    lcd.printf("Fre-Cntr");
-    lcd.locate(0, 1);    // 2nd line top
-    //        12345678
-    lcd.puts(" JH1PJL ");
-    lcd.setContrast(0x16);
-#endif
-#if defined(USE_GRAP_LCD)
-    glcd.cls();
-    glcd.locate(0, 0);
-    glcd.printf("--- Frequency Counter --\r\n");
-    glcd.printf("     Kenji Arai / JH1PJL\r\n" );
-    glcd.printf("                        \r\n");
-#if defined(TARGET_LPC1768)
-    glcd.set_contrast(0x06);
-    glcd.printf(" Input: P30 PWM out: P21\r\n" );
-    glcd.printf(" LED1:Gate  LED2:signal \r\n" );
-#elif defined(TARGET_LPC1114)
-    glcd.set_contrast(0x01);
-    glcd.printf(" LED2:Gate              " );
-#elif defined(TARGET_NUCLEO_F401RE) || defined(TARGET_NUCLEO_F411RE)
-    glcd.set_contrast(0x06);
-    glcd.printf(" Input: PA0 PWM out: PA8\r\n" );
-    glcd.printf(" LED1:Gate              \r\n" );
-#else
-#error "No support for this CPU"
-#endif
-#endif  // defined(USE_GRAP_LCD)
-#if defined(USE_TEXT_LCD)
-    wait(5.0);
-    lcd.locate(0, 1);    // 2nd line top
-    //        12345678
-    lcd.puts("        ");
-#endif
-    // Set Internalclock for reference
-    CLK_REFRENCE();
-    freqency = 0;
     while(true) {
-        led_gate = 1;
-        freqency = (float)fc.read_frequency(t_gate);
-        led_gate = 0;
-        wait(1.1 - t_gate);
-        if (freqency == 0) {
-            led_not_zero = 1;
-        } else {
-            led_not_zero = 0;
+        while (fc.status_1pps() == 0) {
+            ;
         }
-        read_sw_and_set_gate_time();
-        PRINTF("f= %9.0f [Hz], gate= %4.3f [Sec]\r\n", freqency/t_gate, t_gate);
-#if defined(USE_TEXT_LCD)
-        lcd.locate(0, 0);    // 1st line top
-        lcd.printf("%8.0f", freqency);
-        lcd.locate(0, 1);    // 2nd line top
-#endif
-#if defined(USE_GRAP_LCD)
-        glcd.locate(0, 10);
-        glcd.printf("                      \r\n");
-        glcd.locate(10, 10);
-        glcd.printf("%8.0f Hz", freqency);
-        glcd.locate(10, 20);
-#endif
-        switch (sw) {
-            case 0:
-#if defined(USE_TEXT_LCD)
-                //          12345678
-                lcd.printf("x1000 Hz");
-#endif
-#if defined(USE_GRAP_LCD)
-                glcd.printf("  x1000   ");
-#endif
-                break;
-            case 1:
-#if defined(USE_TEXT_LCD)
-                //          12345678
-                lcd.printf("x100  Hz");
-#endif
-#if defined(USE_GRAP_LCD)
-                glcd.printf("  x100    ");
-#endif
-                break;
-            case 2:
-#if defined(USE_TEXT_LCD)
-                //          12345678
-                lcd.printf("x10   Hz");
-#endif
-#if defined(USE_GRAP_LCD)
-                glcd.printf("x10     ");
-#endif
-                break;
-            case 3:
-            default:
-#if defined(USE_TEXT_LCD)
-                //          12345678
-                lcd.printf("x1    Hz");
-#endif
-#if defined(USE_GRAP_LCD)
-                glcd.printf("  x1      ");
-#endif
-                break;
+        counter_1pps = fc.read_avarage_1pps();
+        while (fc.status_freq_update() == 0) {
+            ;
         }
+        new_frequency = fc.read_freq_data();
+        PRINTF("1PPS/ave = %9d , FREQUENCY = %9d\r\n", counter_1pps, new_frequency);
     }
 }