Johnny Yam
wireless debugging via Bluetooth Bee module wiki: http://mbed.org/cookbook/Wireless-Debugging-with-Bluetooth-Bee
BluetoothBee.cpp@4:282c2f6fb0e9, 2012-03-31 (annotated)
- Committer:
- jyam
- Date:
- Sat Mar 31 04:12:05 2012 +0000
- Revision:
- 4:282c2f6fb0e9
Who changed what in which revision?
| User | Revision | Line number | New contents of line |
|---|---|---|---|
| jyam | 4:282c2f6fb0e9 | 1 | //BluetoothBee.cpp |
| jyam | 4:282c2f6fb0e9 | 2 | |
| jyam | 4:282c2f6fb0e9 | 3 | #include"BluetoothBee.h" |
| jyam | 4:282c2f6fb0e9 | 4 | #include "mbed.h" |
| jyam | 4:282c2f6fb0e9 | 5 | |
| jyam | 4:282c2f6fb0e9 | 6 | #define WAIT_TIME 2 // wait time; you may need to increase this number for higher reliability (but slower) |
| jyam | 4:282c2f6fb0e9 | 7 | |
| jyam | 4:282c2f6fb0e9 | 8 | BluetoothBee::BluetoothBee(PinName tx, PinName rx) :Serial(tx,rx) {} |
| jyam | 4:282c2f6fb0e9 | 9 | |
| jyam | 4:282c2f6fb0e9 | 10 | void BluetoothBee::setup() { |
| jyam | 4:282c2f6fb0e9 | 11 | baud(38400); // the Bluetooth Bee defaults to 38400 baud, 8N1 (8 data bits, no parity, 1 stop bit) |
| jyam | 4:282c2f6fb0e9 | 12 | // mbed defaults to 9600 8N1; thus, change baud rate to 38400 |
| jyam | 4:282c2f6fb0e9 | 13 | printf("\r\n+STWMOD=0\r\n"); // set as slave mode |
| jyam | 4:282c2f6fb0e9 | 14 | wait(WAIT_TIME); |
| jyam | 4:282c2f6fb0e9 | 15 | printf("\r\n+STNA=BluetoothBee\r\n"); // set device name as "BluetoothBee" |
| jyam | 4:282c2f6fb0e9 | 16 | wait(WAIT_TIME); |
| jyam | 4:282c2f6fb0e9 | 17 | printf("\r\n+STOAUT=1\r\n"); // allow devices to connect to module |
| jyam | 4:282c2f6fb0e9 | 18 | wait(WAIT_TIME); |
| jyam | 4:282c2f6fb0e9 | 19 | printf("\r\n+INQ=1\r\n"); // start broadcasting (make device visible) |
| jyam | 4:282c2f6fb0e9 | 20 | wait(WAIT_TIME); |
| jyam | 4:282c2f6fb0e9 | 21 | } |