File content as of revision 0:f8c1e0b2d473:

/* mbed Microcontroller Library
 * Copyright (c) 2006-2013 ARM Limited
 *
 * Licensed under the Apache License, Version 2.0 (the "License");
 * you may not use this file except in compliance with the License.
 * You may obtain a copy of the License at
 *
 *     http://www.apache.org/licenses/LICENSE-2.0
 *
 * Unless required by applicable law or agreed to in writing, software
 * distributed under the License is distributed on an "AS IS" BASIS,
 * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
 * See the License for the specific language governing permissions and
 * limitations under the License.
 */

#include "mbed.h"
#include "ble/BLE.h"
#include "ble/services/HealthThermometerService.h"
#include "acd52832_bsp.h"
#include "GapAdvertisingData.h"

#define SLEEP_TIME      5           // Sleep time in seconds
#define WAKE_UP_TIME    1000        // Sleep time in ms

bool SLEEP = true;
int8_t txPower = 4;

static HealthThermometerService *thermometerServicePtr;

uint8_t MSD[18] = {0x59, 0x00, 0xE1, 0x61, 0x35, 0xBA, 0xC0, 0xEC, 0x47, 0x2A, 0x98, 0x00, 0xAF, 0x18, 0x43, 0xFF, 0x05, 0xE8};

/* Restart Advertising on disconnection*/
void disconnectionCallback(const Gap::DisconnectionCallbackParams_t *params){
    BLE::Instance().gap().startAdvertising();
}

void wakeMeUp(void){
        SLEEP = false;
    }

/**
 * This function is called when the ble initialization process has failed
 */
void onBleInitError(BLE &ble, ble_error_t error){
    /* Avoid compiler warnings */
    (void) ble;
    (void) error;
    /* Initialization error handling should go here */
}

/**
 * Callback triggered when the ble initialization process has finished
 */
void bleInitComplete(BLE::InitializationCompleteCallbackContext *params){
    BLE&        ble   = params->ble;
    ble_error_t error = params->error;

    if (error != BLE_ERROR_NONE) {
        /* In case of error, forward the error handling to onBleInitError */
        onBleInitError(ble, error);
        return;
    }

    /* Ensure that it is the default instance of BLE */
    if(ble.getInstanceID() != BLE::DEFAULT_INSTANCE) {
        return;
    }

    ble.gap().onDisconnection(disconnectionCallback);

    /* Setup primary service. */
    thermometerServicePtr = new HealthThermometerService(ble, currentTemperature, HealthThermometerService::LOCATION_EAR);

    /* setup advertising */
    ble.gap().accumulateAdvertisingPayload(GapAdvertisingData::BREDR_NOT_SUPPORTED);
    ble.gap().accumulateAdvertisingPayload(GapAdvertisingData::MANUFACTURER_SPECIFIC_DATA, (uint8_t *)MSD, 18);
    ble.gap().setAdvertisingType(GapAdvertisingParams::ADV_NON_CONNECTABLE_UNDIRECTED);    
    ble.gap().setAdvertisingInterval(1000); /* 1000ms */
    ble.gap().startAdvertising();    
}

int main(void){
    Ticker ticker;
    ticker.attach(wakeMeUp, SLEEP_TIME);   // Wake the device up   
    
    BLE &ble = BLE::Instance();
    ble.init(bleInitComplete);
    ble.gap().setTxPower(txPower);
    GapAdvertisingData postavke = GapAdvertisingData();
    
    
    /* SpinWait for initialization to complete. This is necessary because the
     * BLE object is used in the main loop below. */
    while (ble.hasInitialized()  == false) { /* spin loop */ }

    while (true){
        if (SLEEP){
            ble.gap().stopAdvertising();
            sleep();
        }
        else{
            // I'm awake
            ble.gap().startAdvertising();
            wait_ms(WAKE_UP_TIME);
            SLEEP = true;
            }
    }
}