Jenny Plunkett
NXP Touch Cursor example for LPCXpresso54608, modified for use with Mbed OS.
The tutorial for this example can be found here: https://os.mbed.com/blog/entry/How-to-LPCXpresso54608-touch-panel/
board/pin_mux.cpp
- Committer:
- jplunkett
- Date:
- 2018-04-11
- Revision:
- 0:c107a6f8c368
File content as of revision 0:c107a6f8c368:
/*
* The Clear BSD License
* Copyright (c) 2016, Freescale Semiconductor, Inc.
* Copyright 2016-2017 NXP
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without modification,
* are permitted (subject to the limitations in the disclaimer below) provided
* that the following conditions are met:
*
* o Redistributions of source code must retain the above copyright notice, this list
* of conditions and the following disclaimer.
*
* o Redistributions in binary form must reproduce the above copyright notice, this
* list of conditions and the following disclaimer in the documentation and/or
* other materials provided with the distribution.
*
* o Neither the name of the copyright holder nor the names of its
* contributors may be used to endorse or promote products derived from this
* software without specific prior written permission.
*
* NO EXPRESS OR IMPLIED LICENSES TO ANY PARTY'S PATENT RIGHTS ARE GRANTED BY THIS LICENSE.
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
* WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
* DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE FOR
* ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
* (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
* LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
* ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
* SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*/
/* clang-format off */
/*
* TEXT BELOW IS USED AS SETTING FOR TOOLS *************************************
!!GlobalInfo
product: Pins v3.0
processor: LPC54608J512
package_id: LPC54608J512ET180
mcu_data: ksdk2_0
processor_version: 0.0.11
* BE CAREFUL MODIFYING THIS COMMENT - IT IS YAML SETTINGS FOR TOOLS ***********
*/
/* clang-format on */
#include "fsl_common.h"
#include "fsl_iocon.h"
#include "pin_mux.h"
/* clang-format off */
/*
* TEXT BELOW IS USED AS SETTING FOR TOOLS *************************************
BOARD_InitPins:
- options: {callFromInitBoot: 'true', coreID: core0, enableClock: 'true'}
- pin_list:
- {pin_num: A2, peripheral: FLEXCOMM0, signal: TXD_SCL_MISO, pin_signal: PIO0_30/FC0_TXD_SCL_MISO/CTIMER0_MAT0/SCT0_OUT9/TRACEDATA(1), mode: inactive, invert: disabled,
glitch_filter: disabled, slew_rate: standard, open_drain: disabled}
- {pin_num: B13, peripheral: FLEXCOMM0, signal: RXD_SDA_MOSI, pin_signal: PIO0_29/FC0_RXD_SDA_MOSI/CTIMER2_MAT3/SCT0_OUT8/TRACEDATA(2), mode: inactive, invert: disabled,
glitch_filter: disabled, slew_rate: standard, open_drain: disabled}
- {pin_num: L10, peripheral: LCD, signal: 'LCD_VD, 3', pin_signal: PIO2_21/LCD_VD(3)/FC3_CTS_SDA_SSEL0/MCLK/CTIMER3_MAT3, mode: inactive, invert: disabled, glitch_filter: disabled,
slew_rate: standard, open_drain: disabled}
- {pin_num: K10, peripheral: LCD, signal: 'LCD_VD, 4', pin_signal: PIO2_22/LCD_VD(4)/SCT0_OUT7/CTIMER2_CAP0, mode: inactive, invert: disabled, glitch_filter: disabled,
slew_rate: standard, open_drain: disabled}
- {pin_num: M14, peripheral: LCD, signal: 'LCD_VD, 5', pin_signal: PIO2_23/LCD_VD(5)/SCT0_OUT8, mode: inactive, invert: disabled, glitch_filter: disabled, slew_rate: standard,
open_drain: disabled}
- {pin_num: K14, peripheral: LCD, signal: 'LCD_VD, 6', pin_signal: PIO2_24/LCD_VD(6)/SCT0_OUT9, mode: inactive, invert: disabled, glitch_filter: disabled, slew_rate: standard,
open_drain: disabled}
- {pin_num: J11, peripheral: LCD, signal: 'LCD_VD, 7', pin_signal: PIO2_25/LCD_VD(7)/USB0_VBUS, mode: inactive, invert: disabled, glitch_filter: disabled, slew_rate: standard,
open_drain: disabled}
- {pin_num: G13, peripheral: LCD, signal: 'LCD_VD, 10', pin_signal: PIO2_28/LCD_VD(10)/FC7_CTS_SDA_SSEL0/CTIMER2_CAP2, mode: inactive, invert: disabled, glitch_filter: disabled,
slew_rate: standard, open_drain: disabled}
- {pin_num: G11, peripheral: LCD, signal: 'LCD_VD, 11', pin_signal: PIO2_29/LCD_VD(11)/FC7_RTS_SCL_SSEL1/FC8_TXD_SCL_MISO/CTIMER2_CAP3/CLKOUT, mode: inactive, invert: disabled,
glitch_filter: disabled, slew_rate: standard, open_drain: disabled}
- {pin_num: F12, peripheral: LCD, signal: 'LCD_VD, 12', pin_signal: PIO2_30/LCD_VD(12)/CTIMER2_MAT2, mode: inactive, invert: disabled, glitch_filter: disabled,
slew_rate: standard, open_drain: disabled}
- {pin_num: D14, peripheral: LCD, signal: 'LCD_VD, 13', pin_signal: PIO2_31/LCD_VD(13), mode: inactive, invert: disabled, glitch_filter: disabled, slew_rate: standard,
open_drain: disabled}
- {pin_num: D12, peripheral: LCD, signal: 'LCD_VD, 14', pin_signal: PIO3_0/LCD_VD(14)/PDM0_CLK/CTIMER1_MAT0, mode: inactive, invert: disabled, glitch_filter: disabled,
slew_rate: standard, open_drain: disabled}
- {pin_num: D11, peripheral: LCD, signal: 'LCD_VD, 15', pin_signal: PIO3_1/LCD_VD(15)/PDM0_DATA/CTIMER1_MAT1, mode: inactive, invert: disabled, glitch_filter: disabled,
slew_rate: standard, open_drain: disabled}
- {pin_num: B10, peripheral: LCD, signal: 'LCD_VD, 19', pin_signal: PIO3_5/LCD_VD(19)/FC8_RTS_SCL_SSEL1/CTIMER4_MAT1, mode: inactive, invert: disabled, glitch_filter: disabled,
slew_rate: standard, open_drain: disabled}
- {pin_num: C9, peripheral: LCD, signal: 'LCD_VD, 20', pin_signal: PIO3_6/LCD_VD(20)/LCD_VD(0)/CTIMER4_MAT2, mode: inactive, invert: disabled, glitch_filter: disabled,
slew_rate: standard, open_drain: disabled}
- {pin_num: B8, peripheral: LCD, signal: 'LCD_VD, 21', pin_signal: PIO3_7/LCD_VD(21)/LCD_VD(1)/CTIMER4_CAP2, mode: inactive, invert: disabled, glitch_filter: disabled,
slew_rate: standard, open_drain: disabled}
- {pin_num: A7, peripheral: LCD, signal: 'LCD_VD, 22', pin_signal: PIO3_8/LCD_VD(22)/LCD_VD(2)/CTIMER4_CAP3, mode: inactive, invert: disabled, glitch_filter: disabled,
slew_rate: standard, open_drain: disabled}
- {pin_num: C7, peripheral: LCD, signal: 'LCD_VD, 23', pin_signal: PIO3_9/LCD_VD(23)/LCD_VD(3)/CTIMER0_CAP2, mode: inactive, invert: disabled, glitch_filter: disabled,
slew_rate: standard, open_drain: disabled}
- {pin_num: K3, peripheral: LCD, signal: LCD_PWR, pin_signal: PIO2_11/LCD_PWR/SD_VOLT(0)/FC5_SCK, mode: inactive, invert: disabled, glitch_filter: disabled, slew_rate: standard,
open_drain: disabled}
- {pin_num: P7, peripheral: LCD, signal: LCD_DCLK, pin_signal: PIO2_13/LCD_DCLK/SD_VOLT(2)/FC5_TXD_SCL_MISO, mode: inactive, invert: disabled, glitch_filter: disabled,
slew_rate: standard, open_drain: disabled}
- {pin_num: L7, peripheral: LCD, signal: LCD_FP, pin_signal: PIO2_14/LCD_FP/USB0_FRAME/USB0_PORTPWRN/CTIMER0_MAT2/FC5_CTS_SDA_SSEL0, mode: inactive, invert: disabled,
glitch_filter: disabled, slew_rate: standard, open_drain: disabled}
- {pin_num: M8, peripheral: LCD, signal: LCD_AC, pin_signal: PIO2_15/LCD_AC/USB0_UP_LED/USB0_OVERCURRENTN/CTIMER0_MAT3/FC5_RTS_SCL_SSEL1, mode: inactive, invert: disabled,
glitch_filter: disabled, slew_rate: standard, open_drain: disabled}
- {pin_num: L8, peripheral: LCD, signal: LCD_LP, pin_signal: PIO2_16/LCD_LP/USB1_FRAME/USB1_PORTPWRN/CTIMER1_MAT3/FC8_SCK, mode: inactive, invert: disabled, glitch_filter: disabled,
slew_rate: standard, open_drain: disabled}
- {pin_num: C2, peripheral: FLEXCOMM2, signal: CTS_SDA_SSEL0, pin_signal: PIO3_23/FC2_CTS_SDA_SSEL0/UTICK_CAP3, invert: disabled, glitch_filter: disabled, i2c_slew: i2c,
i2c_drive: high, i2c_filter: enabled}
- {pin_num: E2, peripheral: FLEXCOMM2, signal: RTS_SCL_SSEL1, pin_signal: PIO3_24/FC2_RTS_SCL_SSEL1/CTIMER4_CAP0/USB0_VBUS, invert: disabled, glitch_filter: disabled,
i2c_slew: i2c, i2c_drive: high, i2c_filter: enabled}
- {pin_num: H14, peripheral: GPIO, signal: 'PIO2, 27', pin_signal: PIO2_27/LCD_VD(9)/FC9_SCK/FC3_SSEL2, mode: pullUp, invert: disabled, glitch_filter: disabled,
slew_rate: standard, open_drain: disabled}
- {pin_num: P2, peripheral: SWD, signal: SWO, pin_signal: PIO0_10/FC6_SCK/CTIMER2_CAP2/CTIMER2_MAT0/FC1_TXD_SCL_MISO/SWO/ADC0_0, mode: inactive, invert: disabled,
glitch_filter: disabled, open_drain: disabled}
* BE CAREFUL MODIFYING THIS COMMENT - IT IS YAML SETTINGS FOR TOOLS ***********
*/
/* clang-format on */
/* FUNCTION ************************************************************************************************************
*
* Function Name : BOARD_InitPins
* Description : Configures pin routing and optionally pin electrical features.
*
* END ****************************************************************************************************************/
/* Function assigned for the Core #0 (ARM Cortex-M4) */
void BOARD_InitPins(void)
{
/* Enables the clock for the IOCON block. 0 = Disable; 1 = Enable.: 0x01u */
CLOCK_EnableClock(kCLOCK_Iocon);
const uint32_t port0_pin10_config = (/* Pin is configured as SWO */
IOCON_PIO_FUNC6 |
/* No addition pin function */
IOCON_PIO_MODE_INACT |
/* Input function is not inverted */
IOCON_PIO_INV_DI |
/* Enables digital function */
IOCON_PIO_DIGITAL_EN |
/* Input filter disabled */
IOCON_PIO_INPFILT_OFF |
/* Open drain is disabled */
IOCON_PIO_OPENDRAIN_DI);
/* PORT0 PIN10 (coords: P2) is configured as SWO */
IOCON_PinMuxSet(IOCON, 0U, 10U, port0_pin10_config);
const uint32_t port0_pin29_config = (/* Pin is configured as FC0_RXD_SDA_MOSI */
IOCON_PIO_FUNC1 |
/* No addition pin function */
IOCON_PIO_MODE_INACT |
/* Input function is not inverted */
IOCON_PIO_INV_DI |
/* Enables digital function */
IOCON_PIO_DIGITAL_EN |
/* Input filter disabled */
IOCON_PIO_INPFILT_OFF |
/* Standard mode, output slew rate control is enabled */
IOCON_PIO_SLEW_STANDARD |
/* Open drain is disabled */
IOCON_PIO_OPENDRAIN_DI);
/* PORT0 PIN29 (coords: B13) is configured as FC0_RXD_SDA_MOSI */
IOCON_PinMuxSet(IOCON, 0U, 29U, port0_pin29_config);
const uint32_t port0_pin30_config = (/* Pin is configured as FC0_TXD_SCL_MISO */
IOCON_PIO_FUNC1 |
/* No addition pin function */
IOCON_PIO_MODE_INACT |
/* Input function is not inverted */
IOCON_PIO_INV_DI |
/* Enables digital function */
IOCON_PIO_DIGITAL_EN |
/* Input filter disabled */
IOCON_PIO_INPFILT_OFF |
/* Standard mode, output slew rate control is enabled */
IOCON_PIO_SLEW_STANDARD |
/* Open drain is disabled */
IOCON_PIO_OPENDRAIN_DI);
/* PORT0 PIN30 (coords: A2) is configured as FC0_TXD_SCL_MISO */
IOCON_PinMuxSet(IOCON, 0U, 30U, port0_pin30_config);
const uint32_t port2_pin11_config = (/* Pin is configured as LCD_PWR */
IOCON_PIO_FUNC1 |
/* No addition pin function */
IOCON_PIO_MODE_INACT |
/* Input function is not inverted */
IOCON_PIO_INV_DI |
/* Enables digital function */
IOCON_PIO_DIGITAL_EN |
/* Input filter disabled */
IOCON_PIO_INPFILT_OFF |
/* Standard mode, output slew rate control is enabled */
IOCON_PIO_SLEW_STANDARD |
/* Open drain is disabled */
IOCON_PIO_OPENDRAIN_DI);
/* PORT2 PIN11 (coords: K3) is configured as LCD_PWR */
IOCON_PinMuxSet(IOCON, 2U, 11U, port2_pin11_config);
const uint32_t port2_pin13_config = (/* Pin is configured as LCD_DCLK */
IOCON_PIO_FUNC1 |
/* No addition pin function */
IOCON_PIO_MODE_INACT |
/* Input function is not inverted */
IOCON_PIO_INV_DI |
/* Enables digital function */
IOCON_PIO_DIGITAL_EN |
/* Input filter disabled */
IOCON_PIO_INPFILT_OFF |
/* Standard mode, output slew rate control is enabled */
IOCON_PIO_SLEW_STANDARD |
/* Open drain is disabled */
IOCON_PIO_OPENDRAIN_DI);
/* PORT2 PIN13 (coords: P7) is configured as LCD_DCLK */
IOCON_PinMuxSet(IOCON, 2U, 13U, port2_pin13_config);
const uint32_t port2_pin14_config = (/* Pin is configured as LCD_FP */
IOCON_PIO_FUNC1 |
/* No addition pin function */
IOCON_PIO_MODE_INACT |
/* Input function is not inverted */
IOCON_PIO_INV_DI |
/* Enables digital function */
IOCON_PIO_DIGITAL_EN |
/* Input filter disabled */
IOCON_PIO_INPFILT_OFF |
/* Standard mode, output slew rate control is enabled */
IOCON_PIO_SLEW_STANDARD |
/* Open drain is disabled */
IOCON_PIO_OPENDRAIN_DI);
/* PORT2 PIN14 (coords: L7) is configured as LCD_FP */
IOCON_PinMuxSet(IOCON, 2U, 14U, port2_pin14_config);
const uint32_t port2_pin15_config = (/* Pin is configured as LCD_AC */
IOCON_PIO_FUNC1 |
/* No addition pin function */
IOCON_PIO_MODE_INACT |
/* Input function is not inverted */
IOCON_PIO_INV_DI |
/* Enables digital function */
IOCON_PIO_DIGITAL_EN |
/* Input filter disabled */
IOCON_PIO_INPFILT_OFF |
/* Standard mode, output slew rate control is enabled */
IOCON_PIO_SLEW_STANDARD |
/* Open drain is disabled */
IOCON_PIO_OPENDRAIN_DI);
/* PORT2 PIN15 (coords: M8) is configured as LCD_AC */
IOCON_PinMuxSet(IOCON, 2U, 15U, port2_pin15_config);
const uint32_t port2_pin16_config = (/* Pin is configured as LCD_LP */
IOCON_PIO_FUNC1 |
/* No addition pin function */
IOCON_PIO_MODE_INACT |
/* Input function is not inverted */
IOCON_PIO_INV_DI |
/* Enables digital function */
IOCON_PIO_DIGITAL_EN |
/* Input filter disabled */
IOCON_PIO_INPFILT_OFF |
/* Standard mode, output slew rate control is enabled */
IOCON_PIO_SLEW_STANDARD |
/* Open drain is disabled */
IOCON_PIO_OPENDRAIN_DI);
/* PORT2 PIN16 (coords: L8) is configured as LCD_LP */
IOCON_PinMuxSet(IOCON, 2U, 16U, port2_pin16_config);
const uint32_t port2_pin21_config = (/* Pin is configured as LCD_VD(3) */
IOCON_PIO_FUNC1 |
/* No addition pin function */
IOCON_PIO_MODE_INACT |
/* Input function is not inverted */
IOCON_PIO_INV_DI |
/* Enables digital function */
IOCON_PIO_DIGITAL_EN |
/* Input filter disabled */
IOCON_PIO_INPFILT_OFF |
/* Standard mode, output slew rate control is enabled */
IOCON_PIO_SLEW_STANDARD |
/* Open drain is disabled */
IOCON_PIO_OPENDRAIN_DI);
/* PORT2 PIN21 (coords: L10) is configured as LCD_VD(3) */
IOCON_PinMuxSet(IOCON, 2U, 21U, port2_pin21_config);
const uint32_t port2_pin22_config = (/* Pin is configured as LCD_VD(4) */
IOCON_PIO_FUNC1 |
/* No addition pin function */
IOCON_PIO_MODE_INACT |
/* Input function is not inverted */
IOCON_PIO_INV_DI |
/* Enables digital function */
IOCON_PIO_DIGITAL_EN |
/* Input filter disabled */
IOCON_PIO_INPFILT_OFF |
/* Standard mode, output slew rate control is enabled */
IOCON_PIO_SLEW_STANDARD |
/* Open drain is disabled */
IOCON_PIO_OPENDRAIN_DI);
/* PORT2 PIN22 (coords: K10) is configured as LCD_VD(4) */
IOCON_PinMuxSet(IOCON, 2U, 22U, port2_pin22_config);
const uint32_t port2_pin23_config = (/* Pin is configured as LCD_VD(5) */
IOCON_PIO_FUNC1 |
/* No addition pin function */
IOCON_PIO_MODE_INACT |
/* Input function is not inverted */
IOCON_PIO_INV_DI |
/* Enables digital function */
IOCON_PIO_DIGITAL_EN |
/* Input filter disabled */
IOCON_PIO_INPFILT_OFF |
/* Standard mode, output slew rate control is enabled */
IOCON_PIO_SLEW_STANDARD |
/* Open drain is disabled */
IOCON_PIO_OPENDRAIN_DI);
/* PORT2 PIN23 (coords: M14) is configured as LCD_VD(5) */
IOCON_PinMuxSet(IOCON, 2U, 23U, port2_pin23_config);
const uint32_t port2_pin24_config = (/* Pin is configured as LCD_VD(6) */
IOCON_PIO_FUNC1 |
/* No addition pin function */
IOCON_PIO_MODE_INACT |
/* Input function is not inverted */
IOCON_PIO_INV_DI |
/* Enables digital function */
IOCON_PIO_DIGITAL_EN |
/* Input filter disabled */
IOCON_PIO_INPFILT_OFF |
/* Standard mode, output slew rate control is enabled */
IOCON_PIO_SLEW_STANDARD |
/* Open drain is disabled */
IOCON_PIO_OPENDRAIN_DI);
/* PORT2 PIN24 (coords: K14) is configured as LCD_VD(6) */
IOCON_PinMuxSet(IOCON, 2U, 24U, port2_pin24_config);
const uint32_t port2_pin25_config = (/* Pin is configured as LCD_VD(7) */
IOCON_PIO_FUNC1 |
/* No addition pin function */
IOCON_PIO_MODE_INACT |
/* Input function is not inverted */
IOCON_PIO_INV_DI |
/* Enables digital function */
IOCON_PIO_DIGITAL_EN |
/* Input filter disabled */
IOCON_PIO_INPFILT_OFF |
/* Standard mode, output slew rate control is enabled */
IOCON_PIO_SLEW_STANDARD |
/* Open drain is disabled */
IOCON_PIO_OPENDRAIN_DI);
/* PORT2 PIN25 (coords: J11) is configured as LCD_VD(7) */
IOCON_PinMuxSet(IOCON, 2U, 25U, port2_pin25_config);
const uint32_t port2_pin27_config = (/* Pin is configured as PIO2_27 */
IOCON_PIO_FUNC0 |
/* Selects pull-up function */
IOCON_PIO_MODE_PULLUP |
/* Input function is not inverted */
IOCON_PIO_INV_DI |
/* Enables digital function */
IOCON_PIO_DIGITAL_EN |
/* Input filter disabled */
IOCON_PIO_INPFILT_OFF |
/* Standard mode, output slew rate control is enabled */
IOCON_PIO_SLEW_STANDARD |
/* Open drain is disabled */
IOCON_PIO_OPENDRAIN_DI);
/* PORT2 PIN27 (coords: H14) is configured as PIO2_27 */
IOCON_PinMuxSet(IOCON, 2U, 27U, port2_pin27_config);
const uint32_t port2_pin28_config = (/* Pin is configured as LCD_VD(10) */
IOCON_PIO_FUNC1 |
/* No addition pin function */
IOCON_PIO_MODE_INACT |
/* Input function is not inverted */
IOCON_PIO_INV_DI |
/* Enables digital function */
IOCON_PIO_DIGITAL_EN |
/* Input filter disabled */
IOCON_PIO_INPFILT_OFF |
/* Standard mode, output slew rate control is enabled */
IOCON_PIO_SLEW_STANDARD |
/* Open drain is disabled */
IOCON_PIO_OPENDRAIN_DI);
/* PORT2 PIN28 (coords: G13) is configured as LCD_VD(10) */
IOCON_PinMuxSet(IOCON, 2U, 28U, port2_pin28_config);
const uint32_t port2_pin29_config = (/* Pin is configured as LCD_VD(11) */
IOCON_PIO_FUNC1 |
/* No addition pin function */
IOCON_PIO_MODE_INACT |
/* Input function is not inverted */
IOCON_PIO_INV_DI |
/* Enables digital function */
IOCON_PIO_DIGITAL_EN |
/* Input filter disabled */
IOCON_PIO_INPFILT_OFF |
/* Standard mode, output slew rate control is enabled */
IOCON_PIO_SLEW_STANDARD |
/* Open drain is disabled */
IOCON_PIO_OPENDRAIN_DI);
/* PORT2 PIN29 (coords: G11) is configured as LCD_VD(11) */
IOCON_PinMuxSet(IOCON, 2U, 29U, port2_pin29_config);
const uint32_t port2_pin30_config = (/* Pin is configured as LCD_VD(12) */
IOCON_PIO_FUNC1 |
/* No addition pin function */
IOCON_PIO_MODE_INACT |
/* Input function is not inverted */
IOCON_PIO_INV_DI |
/* Enables digital function */
IOCON_PIO_DIGITAL_EN |
/* Input filter disabled */
IOCON_PIO_INPFILT_OFF |
/* Standard mode, output slew rate control is enabled */
IOCON_PIO_SLEW_STANDARD |
/* Open drain is disabled */
IOCON_PIO_OPENDRAIN_DI);
/* PORT2 PIN30 (coords: F12) is configured as LCD_VD(12) */
IOCON_PinMuxSet(IOCON, 2U, 30U, port2_pin30_config);
const uint32_t port2_pin31_config = (/* Pin is configured as LCD_VD(13) */
IOCON_PIO_FUNC1 |
/* No addition pin function */
IOCON_PIO_MODE_INACT |
/* Input function is not inverted */
IOCON_PIO_INV_DI |
/* Enables digital function */
IOCON_PIO_DIGITAL_EN |
/* Input filter disabled */
IOCON_PIO_INPFILT_OFF |
/* Standard mode, output slew rate control is enabled */
IOCON_PIO_SLEW_STANDARD |
/* Open drain is disabled */
IOCON_PIO_OPENDRAIN_DI);
/* PORT2 PIN31 (coords: D14) is configured as LCD_VD(13) */
IOCON_PinMuxSet(IOCON, 2U, 31U, port2_pin31_config);
const uint32_t port3_pin0_config = (/* Pin is configured as LCD_VD(14) */
IOCON_PIO_FUNC1 |
/* No addition pin function */
IOCON_PIO_MODE_INACT |
/* Input function is not inverted */
IOCON_PIO_INV_DI |
/* Enables digital function */
IOCON_PIO_DIGITAL_EN |
/* Input filter disabled */
IOCON_PIO_INPFILT_OFF |
/* Standard mode, output slew rate control is enabled */
IOCON_PIO_SLEW_STANDARD |
/* Open drain is disabled */
IOCON_PIO_OPENDRAIN_DI);
/* PORT3 PIN0 (coords: D12) is configured as LCD_VD(14) */
IOCON_PinMuxSet(IOCON, 3U, 0U, port3_pin0_config);
const uint32_t port3_pin1_config = (/* Pin is configured as LCD_VD(15) */
IOCON_PIO_FUNC1 |
/* No addition pin function */
IOCON_PIO_MODE_INACT |
/* Input function is not inverted */
IOCON_PIO_INV_DI |
/* Enables digital function */
IOCON_PIO_DIGITAL_EN |
/* Input filter disabled */
IOCON_PIO_INPFILT_OFF |
/* Standard mode, output slew rate control is enabled */
IOCON_PIO_SLEW_STANDARD |
/* Open drain is disabled */
IOCON_PIO_OPENDRAIN_DI);
/* PORT3 PIN1 (coords: D11) is configured as LCD_VD(15) */
IOCON_PinMuxSet(IOCON, 3U, 1U, port3_pin1_config);
const uint32_t port3_pin23_config = (/* Pin is configured as FC2_CTS_SDA_SSEL0 */
IOCON_PIO_FUNC1 |
/* I2C mode */
IOCON_PIO_I2CSLEW_I2C |
/* Input function is not inverted */
IOCON_PIO_INV_DI |
/* Enables digital function */
IOCON_PIO_DIGITAL_EN |
/* Input filter disabled */
IOCON_PIO_INPFILT_OFF |
/* High drive: 20 mA */
IOCON_PIO_I2CDRIVE_HIGH |
/* I2C 50 ns glitch filter enabled */
IOCON_PIO_I2CFILTER_EN);
/* PORT3 PIN23 (coords: C2) is configured as FC2_CTS_SDA_SSEL0 */
IOCON_PinMuxSet(IOCON, 3U, 23U, port3_pin23_config);
const uint32_t port3_pin24_config = (/* Pin is configured as FC2_RTS_SCL_SSEL1 */
IOCON_PIO_FUNC1 |
/* I2C mode */
IOCON_PIO_I2CSLEW_I2C |
/* Input function is not inverted */
IOCON_PIO_INV_DI |
/* Enables digital function */
IOCON_PIO_DIGITAL_EN |
/* Input filter disabled */
IOCON_PIO_INPFILT_OFF |
/* High drive: 20 mA */
IOCON_PIO_I2CDRIVE_HIGH |
/* I2C 50 ns glitch filter enabled */
IOCON_PIO_I2CFILTER_EN);
/* PORT3 PIN24 (coords: E2) is configured as FC2_RTS_SCL_SSEL1 */
IOCON_PinMuxSet(IOCON, 3U, 24U, port3_pin24_config);
const uint32_t port3_pin5_config = (/* Pin is configured as LCD_VD(19) */
IOCON_PIO_FUNC1 |
/* No addition pin function */
IOCON_PIO_MODE_INACT |
/* Input function is not inverted */
IOCON_PIO_INV_DI |
/* Enables digital function */
IOCON_PIO_DIGITAL_EN |
/* Input filter disabled */
IOCON_PIO_INPFILT_OFF |
/* Standard mode, output slew rate control is enabled */
IOCON_PIO_SLEW_STANDARD |
/* Open drain is disabled */
IOCON_PIO_OPENDRAIN_DI);
/* PORT3 PIN5 (coords: B10) is configured as LCD_VD(19) */
IOCON_PinMuxSet(IOCON, 3U, 5U, port3_pin5_config);
const uint32_t port3_pin6_config = (/* Pin is configured as LCD_VD(20) */
IOCON_PIO_FUNC1 |
/* No addition pin function */
IOCON_PIO_MODE_INACT |
/* Input function is not inverted */
IOCON_PIO_INV_DI |
/* Enables digital function */
IOCON_PIO_DIGITAL_EN |
/* Input filter disabled */
IOCON_PIO_INPFILT_OFF |
/* Standard mode, output slew rate control is enabled */
IOCON_PIO_SLEW_STANDARD |
/* Open drain is disabled */
IOCON_PIO_OPENDRAIN_DI);
/* PORT3 PIN6 (coords: C9) is configured as LCD_VD(20) */
IOCON_PinMuxSet(IOCON, 3U, 6U, port3_pin6_config);
const uint32_t port3_pin7_config = (/* Pin is configured as LCD_VD(21) */
IOCON_PIO_FUNC1 |
/* No addition pin function */
IOCON_PIO_MODE_INACT |
/* Input function is not inverted */
IOCON_PIO_INV_DI |
/* Enables digital function */
IOCON_PIO_DIGITAL_EN |
/* Input filter disabled */
IOCON_PIO_INPFILT_OFF |
/* Standard mode, output slew rate control is enabled */
IOCON_PIO_SLEW_STANDARD |
/* Open drain is disabled */
IOCON_PIO_OPENDRAIN_DI);
/* PORT3 PIN7 (coords: B8) is configured as LCD_VD(21) */
IOCON_PinMuxSet(IOCON, 3U, 7U, port3_pin7_config);
const uint32_t port3_pin8_config = (/* Pin is configured as LCD_VD(22) */
IOCON_PIO_FUNC1 |
/* No addition pin function */
IOCON_PIO_MODE_INACT |
/* Input function is not inverted */
IOCON_PIO_INV_DI |
/* Enables digital function */
IOCON_PIO_DIGITAL_EN |
/* Input filter disabled */
IOCON_PIO_INPFILT_OFF |
/* Standard mode, output slew rate control is enabled */
IOCON_PIO_SLEW_STANDARD |
/* Open drain is disabled */
IOCON_PIO_OPENDRAIN_DI);
/* PORT3 PIN8 (coords: A7) is configured as LCD_VD(22) */
IOCON_PinMuxSet(IOCON, 3U, 8U, port3_pin8_config);
const uint32_t port3_pin9_config = (/* Pin is configured as LCD_VD(23) */
IOCON_PIO_FUNC1 |
/* No addition pin function */
IOCON_PIO_MODE_INACT |
/* Input function is not inverted */
IOCON_PIO_INV_DI |
/* Enables digital function */
IOCON_PIO_DIGITAL_EN |
/* Input filter disabled */
IOCON_PIO_INPFILT_OFF |
/* Standard mode, output slew rate control is enabled */
IOCON_PIO_SLEW_STANDARD |
/* Open drain is disabled */
IOCON_PIO_OPENDRAIN_DI);
/* PORT3 PIN9 (coords: C7) is configured as LCD_VD(23) */
IOCON_PinMuxSet(IOCON, 3U, 9U, port3_pin9_config);
}
/***********************************************************************************************************************
* EOF
**********************************************************************************************************************/