File content as of revision 40:1c33564c68c7:

#include "mbed.h"
#include "Adafruit_ADS1015.h"

//Pin definition
DigitalOut led1(PA_0); //External Red LED
DigitalOut led2(PB_1); //Second LED (Green)
DigitalOut reset(PA_7); //Pin to reset the ESP
DigitalIn User_Button(PC_13); //User button
DigitalOut Wire1(PA_4); //Sensor wire 1
DigitalOut Wire2(PA_1); //Sensor wire 2
DigitalOut Wire3(PC_1); //Sensor wire 3
DigitalIn Sensor_Switch(PA_11); //Pin to switch the peripherals on/off
DigitalOut SPI_cs(PB_0); // SPI chip select pin
#define D_SDA PC_9 //I2C SDA pin
#define D_SCL PA_8 //I2C SCL pin
#define Serial2_tx PA_2 //Serial2 tx pin
#define Serial2_rx PA_3 //Serial2 rx pin



//Interfaces definition
int BaudRate =115200;
Serial pc(USBTX, USBRX,BaudRate); //tx, rx : PA_9,PA_10 : pc Serial
Serial Serial2 (Serial2_tx,Serial2_rx,BaudRate); //tx, rx : Serial2 Serial
I2C i2c(D_SDA, D_SCL);  //I2C interface, pins define in "Pin definition"
SPI spi(NC, PA_6, PA_5); //PI interface : mosi, miso, sclk
Adafruit_ADS1115 ads(&i2c);//ADS1115 library though I2C

//Function definition
void ADSReadinmg();
void SerialPrintData();

//Global variable definition
int Reading_Number=0;
int data[12]= {0,3,0,0,0,0,0,0,0,0,0,32}; //Reading_Number, V_bat, Wire1_1, Wire1_2, Wire1_3, Wire2_1, Wire2_2, Wire2_3, Wire3_1, Wire3_2, Wire3_3, Temp


int main()
{
    wait(3);
    ads.setGain(GAIN_SIXTEEN); // set range to +/-0.256V
    pc.printf("\r\n"); //New carage return + new line
    pc.printf("App Started \r\n"); //New carage return + new line
    SerialPrintData();
    while (1) {
        Reading_Number++;
        data[0]=Reading_Number;
        ADSReadinmg();
        SerialPrintData();
        led1 = !led1;
        wait(1);
    }
}


void ADSReadinmg()
{
    Wire1=0;
    Wire2=0;
    Wire3=0;
    wait(1);

    Wire1=1;
    wait(1);
    for(int i=1; i<4; i++) {
        pc.printf("Wire1_X: %d\r\n",ads.readADC_SingleEnded(i)); //Wire 1
        data[i+1]=ads.readADC_SingleEnded(i);
        wait(1);
    }
    Wire1=0;
    wait(1);

    Wire2=1;
    wait(1);
    for(int i=1; i<4; i++) {
        pc.printf("Wire2_?: %d\r\n",ads.readADC_SingleEnded(i)); //Wire 1
        data[i+4]=ads.readADC_SingleEnded(i);
        wait(1);
    }
    Wire2=0;
    wait(1);

    Wire3=1;
    wait(1);
    for(int i=1; i<4; i++) {
        pc.printf("Wire3_?: %d\r\n",ads.readADC_SingleEnded(i)); //Wire 1
        data[i+7]=ads.readADC_SingleEnded(i);
        wait(1);
    }

    pc.printf("\r\n"); //Wire 1
    Wire3=0;
    wait(1);


    /*
      for(int i=0; i<4; i++) {
          data[i+1]=ads.readADC_SingleEnded(i);
      }
    */
}


void SerialPrintData()
{
    pc.printf("\r\n"); //New carage return + new line
    pc.printf("Reading #: %d\r\n",data[0]); //Reading #
    pc.printf("V_Bar: %d\r\n",data[1]); //Baterry voltage

    pc.printf("Wire1_1: %d\r\n",data[2]); //Wire 1
    pc.printf("Wire1_2: %d\r\n",data[3]); //Wire2
    pc.printf("Wire1_3: %d\r\n",data[4]); //Wire3

    pc.printf("Wire2_1: %d\r\n",data[5]); //Wire 1
    pc.printf("Wire2_2: %d\r\n",data[6]); //Wire2
    pc.printf("Wire2_3: %d\r\n",data[7]); //Wire3

    pc.printf("Wire3_1: %d\r\n",data[8]); //Wire 1
    pc.printf("Wire3_2: %d\r\n",data[9]); //Wire2
    pc.printf("Wire3_3: %d\r\n",data[10]); //Wire3

    pc.printf("Temp: %d\r\n",data[11]); //Temperature
    pc.printf("\r\n"); //New carage return + new line

    /*
        int DataElements=sizeof(data)/sizeof(data[0]);
        for(int i=0; i<DataElements; i++) {
            pc.printf("Ch%d: %d\r\n",i,data[i+1]);
        }
    */
}