Jon Marsh / Mbed 2 deprecated m3pi_attack

Allows the M3Pi to be used as a Sumo robot, using the sharp 100 distance sensors on the front. Attack mid/near strategy

Dependencies:   mbed

m3pi/m3pi.h@0:dda4072af5ff, 2012-06-18 (annotated)

Committer:
jonmarsh
Date:
Mon Jun 18 09:54:54 2012 +0000
Revision:
0:dda4072af5ff
not tested

Who changed what in which revision?

UserRevisionLine numberNew contents of line
jonmarsh 0:dda4072af5ff 1 /* mbed m3pi Library
jonmarsh 0:dda4072af5ff 2 * Copyright (c) 2007-2010 cstyles
jonmarsh 0:dda4072af5ff 3 *
jonmarsh 0:dda4072af5ff 4 * Permission is hereby granted, free of charge, to any person obtaining a copy
jonmarsh 0:dda4072af5ff 5 * of this software and associated documentation files (the "Software"), to deal
jonmarsh 0:dda4072af5ff 6 * in the Software without restriction, including without limitation the rights
jonmarsh 0:dda4072af5ff 7 * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
jonmarsh 0:dda4072af5ff 8 * copies of the Software, and to permit persons to whom the Software is
jonmarsh 0:dda4072af5ff 9 * furnished to do so, subject to the following conditions:
jonmarsh 0:dda4072af5ff 10 *
jonmarsh 0:dda4072af5ff 11 * The above copyright notice and this permission notice shall be included in
jonmarsh 0:dda4072af5ff 12 * all copies or substantial portions of the Software.
jonmarsh 0:dda4072af5ff 13 *
jonmarsh 0:dda4072af5ff 14 * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
jonmarsh 0:dda4072af5ff 15 * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
jonmarsh 0:dda4072af5ff 16 * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
jonmarsh 0:dda4072af5ff 17 * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
jonmarsh 0:dda4072af5ff 18 * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
jonmarsh 0:dda4072af5ff 19 * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
jonmarsh 0:dda4072af5ff 20 * THE SOFTWARE.
jonmarsh 0:dda4072af5ff 21 */
jonmarsh 0:dda4072af5ff 22
jonmarsh 0:dda4072af5ff 23 #ifndef M3PI_H
jonmarsh 0:dda4072af5ff 24 #define M3PI_H
jonmarsh 0:dda4072af5ff 25
jonmarsh 0:dda4072af5ff 26 #include "mbed.h"
jonmarsh 0:dda4072af5ff 27 #include "platform.h"
jonmarsh 0:dda4072af5ff 28
jonmarsh 0:dda4072af5ff 29 #ifdef MBED_RPC
jonmarsh 0:dda4072af5ff 30 #include "rpc.h"
jonmarsh 0:dda4072af5ff 31 #endif
jonmarsh 0:dda4072af5ff 32
jonmarsh 0:dda4072af5ff 33 #define SEND_SIGNATURE 0x81
jonmarsh 0:dda4072af5ff 34 #define SEND_RAW_SENSOR_VALUES 0x86
jonmarsh 0:dda4072af5ff 35 #define SEND_CALIBRATED_SENSOR_VALUES 0x87
jonmarsh 0:dda4072af5ff 36 #define SEND_TRIMPOT 0xB0
jonmarsh 0:dda4072af5ff 37 #define SEND_BATTERY_MILLIVOLTS 0xB1
jonmarsh 0:dda4072af5ff 38 #define DO_PLAY 0xB3
jonmarsh 0:dda4072af5ff 39 #define PI_CALIBRATE 0xB4
jonmarsh 0:dda4072af5ff 40 #define DO_CLEAR 0xB7
jonmarsh 0:dda4072af5ff 41 #define DO_PRINT 0xB8
jonmarsh 0:dda4072af5ff 42 #define DO_LCD_GOTO_XY 0xB9
jonmarsh 0:dda4072af5ff 43 #define LINE_SENSORS_RESET_CALIBRATION 0xB5
jonmarsh 0:dda4072af5ff 44 #define SEND_LINE_POSITION 0xB6
jonmarsh 0:dda4072af5ff 45 #define AUTO_CALIBRATE 0xBA
jonmarsh 0:dda4072af5ff 46 #define SET_PID 0xBB
jonmarsh 0:dda4072af5ff 47 #define STOP_PID 0xBC
jonmarsh 0:dda4072af5ff 48 #define M1_FORWARD 0xC1
jonmarsh 0:dda4072af5ff 49 #define M1_BACKWARD 0xC2
jonmarsh 0:dda4072af5ff 50 #define M2_FORWARD 0xC5
jonmarsh 0:dda4072af5ff 51 #define M2_BACKWARD 0xC6
jonmarsh 0:dda4072af5ff 52
jonmarsh 0:dda4072af5ff 53
jonmarsh 0:dda4072af5ff 54 #define LINE_THRESHOLD 100
jonmarsh 0:dda4072af5ff 55
jonmarsh 0:dda4072af5ff 56
jonmarsh 0:dda4072af5ff 57 /** m3pi control class
jonmarsh 0:dda4072af5ff 58 *
jonmarsh 0:dda4072af5ff 59 * Example:
jonmarsh 0:dda4072af5ff 60 * @code
jonmarsh 0:dda4072af5ff 61 * // Drive the m3pi forward, turn left, back, turn right, at half speed for half a second
jonmarsh 0:dda4072af5ff 62
jonmarsh 0:dda4072af5ff 63 #include "mbed.h"
jonmarsh 0:dda4072af5ff 64 #include "m3pi.h"
jonmarsh 0:dda4072af5ff 65
jonmarsh 0:dda4072af5ff 66 m3pi pi;
jonmarsh 0:dda4072af5ff 67
jonmarsh 0:dda4072af5ff 68 int main() {
jonmarsh 0:dda4072af5ff 69
jonmarsh 0:dda4072af5ff 70 wait(0.5);
jonmarsh 0:dda4072af5ff 71
jonmarsh 0:dda4072af5ff 72 pi.forward(0.5);
jonmarsh 0:dda4072af5ff 73 wait (0.5);
jonmarsh 0:dda4072af5ff 74 pi.left(0.5);
jonmarsh 0:dda4072af5ff 75 wait (0.5);
jonmarsh 0:dda4072af5ff 76 pi.backward(0.5);
jonmarsh 0:dda4072af5ff 77 wait (0.5);
jonmarsh 0:dda4072af5ff 78 pi.right(0.5);
jonmarsh 0:dda4072af5ff 79 wait (0.5);
jonmarsh 0:dda4072af5ff 80
jonmarsh 0:dda4072af5ff 81 pi.stop();
jonmarsh 0:dda4072af5ff 82
jonmarsh 0:dda4072af5ff 83 }
jonmarsh 0:dda4072af5ff 84 * @endcode
jonmarsh 0:dda4072af5ff 85 */
jonmarsh 0:dda4072af5ff 86 class m3pi : public Stream {
jonmarsh 0:dda4072af5ff 87
jonmarsh 0:dda4072af5ff 88 // Public functions
jonmarsh 0:dda4072af5ff 89 public:
jonmarsh 0:dda4072af5ff 90
jonmarsh 0:dda4072af5ff 91 /** Create the m3pi object connected to the default pins
jonmarsh 0:dda4072af5ff 92 *
jonmarsh 0:dda4072af5ff 93 */
jonmarsh 0:dda4072af5ff 94 m3pi();
jonmarsh 0:dda4072af5ff 95
jonmarsh 0:dda4072af5ff 96
jonmarsh 0:dda4072af5ff 97
jonmarsh 0:dda4072af5ff 98
jonmarsh 0:dda4072af5ff 99 /** Create the m3pi object connected to the spesific pins
jonmarsh 0:dda4072af5ff 100 *
jonmarsh 0:dda4072af5ff 101 * @param nrst GPIO pin used for reset. Default is p23
jonmarsh 0:dda4072af5ff 102 * @param tx Serial transmit pin. Default is p9
jonmarsh 0:dda4072af5ff 103 * @param rx Serial receive pin. Default is p10
jonmarsh 0:dda4072af5ff 104 */
jonmarsh 0:dda4072af5ff 105 m3pi(PinName nrst, PinName tx, PinName rx);
jonmarsh 0:dda4072af5ff 106
jonmarsh 0:dda4072af5ff 107
jonmarsh 0:dda4072af5ff 108
jonmarsh 0:dda4072af5ff 109 /** Force a hardware reset of the 3pi
jonmarsh 0:dda4072af5ff 110 */
jonmarsh 0:dda4072af5ff 111 void reset (void);
jonmarsh 0:dda4072af5ff 112
jonmarsh 0:dda4072af5ff 113 /** Directly control the speed and direction of the left motor
jonmarsh 0:dda4072af5ff 114 *
jonmarsh 0:dda4072af5ff 115 * @param speed A normalised number -1.0 - 1.0 represents the full range.
jonmarsh 0:dda4072af5ff 116 */
jonmarsh 0:dda4072af5ff 117 void left_motor (float speed);
jonmarsh 0:dda4072af5ff 118
jonmarsh 0:dda4072af5ff 119 /** Directly control the speed and direction of the right motor
jonmarsh 0:dda4072af5ff 120 *
jonmarsh 0:dda4072af5ff 121 * @param speed A normalised number -1.0 - 1.0 represents the full range.
jonmarsh 0:dda4072af5ff 122 */
jonmarsh 0:dda4072af5ff 123 void right_motor (float speed);
jonmarsh 0:dda4072af5ff 124
jonmarsh 0:dda4072af5ff 125 /** Drive both motors forward as the same speed
jonmarsh 0:dda4072af5ff 126 *
jonmarsh 0:dda4072af5ff 127 * @param speed A normalised number 0 - 1.0 represents the full range.
jonmarsh 0:dda4072af5ff 128 */
jonmarsh 0:dda4072af5ff 129 void forward (float speed);
jonmarsh 0:dda4072af5ff 130
jonmarsh 0:dda4072af5ff 131 /** Drive both motors backward as the same speed
jonmarsh 0:dda4072af5ff 132 *
jonmarsh 0:dda4072af5ff 133 * @param speed A normalised number 0 - 1.0 represents the full range.
jonmarsh 0:dda4072af5ff 134 */
jonmarsh 0:dda4072af5ff 135 void backward (float speed);
jonmarsh 0:dda4072af5ff 136
jonmarsh 0:dda4072af5ff 137 /** Drive left motor backwards and right motor forwards at the same speed to turn on the spot
jonmarsh 0:dda4072af5ff 138 *
jonmarsh 0:dda4072af5ff 139 * @param speed A normalised number 0 - 1.0 represents the full range.
jonmarsh 0:dda4072af5ff 140 */
jonmarsh 0:dda4072af5ff 141 void left (float speed);
jonmarsh 0:dda4072af5ff 142
jonmarsh 0:dda4072af5ff 143 /** Drive left motor forward and right motor backwards at the same speed to turn on the spot
jonmarsh 0:dda4072af5ff 144 * @param speed A normalised number 0 - 1.0 represents the full range.
jonmarsh 0:dda4072af5ff 145 */
jonmarsh 0:dda4072af5ff 146 void right (float speed);
jonmarsh 0:dda4072af5ff 147
jonmarsh 0:dda4072af5ff 148 /** Stop both motors
jonmarsh 0:dda4072af5ff 149 *
jonmarsh 0:dda4072af5ff 150 */
jonmarsh 0:dda4072af5ff 151 void stop (void);
jonmarsh 0:dda4072af5ff 152
jonmarsh 0:dda4072af5ff 153 /** Read the voltage of the potentiometer on the 3pi
jonmarsh 0:dda4072af5ff 154 * @returns voltage as a float
jonmarsh 0:dda4072af5ff 155 *
jonmarsh 0:dda4072af5ff 156 */
jonmarsh 0:dda4072af5ff 157 float pot_voltage(void);
jonmarsh 0:dda4072af5ff 158
jonmarsh 0:dda4072af5ff 159 /** Read the battery voltage on the 3pi
jonmarsh 0:dda4072af5ff 160 * @returns battery voltage as a float
jonmarsh 0:dda4072af5ff 161 */
jonmarsh 0:dda4072af5ff 162 float battery(void);
jonmarsh 0:dda4072af5ff 163
jonmarsh 0:dda4072af5ff 164 /** Read the position of the detected line
jonmarsh 0:dda4072af5ff 165 * @returns position as A normalised number -1.0 - 1.0 represents the full range.
jonmarsh 0:dda4072af5ff 166 * -1.0 means line is on the left, or the line has been lost
jonmarsh 0:dda4072af5ff 167 * 0.0 means the line is in the middle
jonmarsh 0:dda4072af5ff 168 * 1.0 means the line is on the right
jonmarsh 0:dda4072af5ff 169 */
jonmarsh 0:dda4072af5ff 170 float line_position (void);
jonmarsh 0:dda4072af5ff 171
jonmarsh 0:dda4072af5ff 172 /** Get the raw sensor values
jonmarsh 0:dda4072af5ff 173 *
jonmarsh 0:dda4072af5ff 174 * @param int* A pointer to a interger array
jonmarsh 0:dda4072af5ff 175 */
jonmarsh 0:dda4072af5ff 176 void get_raw_sensors(int* values);
jonmarsh 0:dda4072af5ff 177
jonmarsh 0:dda4072af5ff 178 /** Get the calibrated sensor values
jonmarsh 0:dda4072af5ff 179 *
jonmarsh 0:dda4072af5ff 180 * @param int* A pointer to an float array
jonmarsh 0:dda4072af5ff 181 */
jonmarsh 0:dda4072af5ff 182 void get_calibrated_sensors(float* values);
jonmarsh 0:dda4072af5ff 183
jonmarsh 0:dda4072af5ff 184 /** Records current levels as white, values used to detect a line
jonmarsh 0:dda4072af5ff 185 *
jonmarsh 0:dda4072af5ff 186 */
jonmarsh 0:dda4072af5ff 187 void get_white_levels();
jonmarsh 0:dda4072af5ff 188
jonmarsh 0:dda4072af5ff 189 /** Gets the line state
jonmarsh 0:dda4072af5ff 190 *
jonmarsh 0:dda4072af5ff 191 * @returns The line status: 0 means no line, -1 means line at back two sensors, 1 means line at front sensors
jonmarsh 0:dda4072af5ff 192 */
jonmarsh 0:dda4072af5ff 193
jonmarsh 0:dda4072af5ff 194 int is_line();
jonmarsh 0:dda4072af5ff 195
jonmarsh 0:dda4072af5ff 196
jonmarsh 0:dda4072af5ff 197 /** Calibrate the sensors. This turns the robot left then right, looking for a line
jonmarsh 0:dda4072af5ff 198 *
jonmarsh 0:dda4072af5ff 199 */
jonmarsh 0:dda4072af5ff 200 char sensor_auto_calibrate (void);
jonmarsh 0:dda4072af5ff 201
jonmarsh 0:dda4072af5ff 202 /** Set calibration manually to the current settings.
jonmarsh 0:dda4072af5ff 203 *
jonmarsh 0:dda4072af5ff 204 */
jonmarsh 0:dda4072af5ff 205 void calibrate(void);
jonmarsh 0:dda4072af5ff 206
jonmarsh 0:dda4072af5ff 207 /** Clear the current calibration settings
jonmarsh 0:dda4072af5ff 208 *
jonmarsh 0:dda4072af5ff 209 */
jonmarsh 0:dda4072af5ff 210 void reset_calibration (void);
jonmarsh 0:dda4072af5ff 211
jonmarsh 0:dda4072af5ff 212 void PID_start(int max_speed, int a, int b, int c, int d);
jonmarsh 0:dda4072af5ff 213
jonmarsh 0:dda4072af5ff 214 void PID_stop();
jonmarsh 0:dda4072af5ff 215
jonmarsh 0:dda4072af5ff 216 /** Write to the 8 LEDs
jonmarsh 0:dda4072af5ff 217 *
jonmarsh 0:dda4072af5ff 218 * @param leds An 8 bit value to put on the LEDs
jonmarsh 0:dda4072af5ff 219 */
jonmarsh 0:dda4072af5ff 220 void leds(int val);
jonmarsh 0:dda4072af5ff 221
jonmarsh 0:dda4072af5ff 222 /** Locate the cursor on the 8x2 LCD
jonmarsh 0:dda4072af5ff 223 *
jonmarsh 0:dda4072af5ff 224 * @param x The horizontal position, from 0 to 7
jonmarsh 0:dda4072af5ff 225 * @param y The vertical position, from 0 to 1
jonmarsh 0:dda4072af5ff 226 */
jonmarsh 0:dda4072af5ff 227 void locate(int x, int y);
jonmarsh 0:dda4072af5ff 228
jonmarsh 0:dda4072af5ff 229 /** Clear the LCD
jonmarsh 0:dda4072af5ff 230 *
jonmarsh 0:dda4072af5ff 231 */
jonmarsh 0:dda4072af5ff 232 void cls(void);
jonmarsh 0:dda4072af5ff 233
jonmarsh 0:dda4072af5ff 234 /** Send a character directly to the 3pi serial interface
jonmarsh 0:dda4072af5ff 235 * @param c The character to send to the 3pi
jonmarsh 0:dda4072af5ff 236 */
jonmarsh 0:dda4072af5ff 237 int putc(int c);
jonmarsh 0:dda4072af5ff 238
jonmarsh 0:dda4072af5ff 239 /** Receive a character directly to the 3pi serial interface
jonmarsh 0:dda4072af5ff 240 * @returns c The character received from the 3pi
jonmarsh 0:dda4072af5ff 241 */
jonmarsh 0:dda4072af5ff 242 int getc();
jonmarsh 0:dda4072af5ff 243
jonmarsh 0:dda4072af5ff 244 /** Send a string buffer to the 3pi serial interface
jonmarsh 0:dda4072af5ff 245 * @param text A pointer to a char array
jonmarsh 0:dda4072af5ff 246 * @param int The character to send to the 3pi
jonmarsh 0:dda4072af5ff 247 */
jonmarsh 0:dda4072af5ff 248 int print(char* text, int length);
jonmarsh 0:dda4072af5ff 249
jonmarsh 0:dda4072af5ff 250
jonmarsh 0:dda4072af5ff 251
jonmarsh 0:dda4072af5ff 252
jonmarsh 0:dda4072af5ff 253 #ifdef MBED_RPC
jonmarsh 0:dda4072af5ff 254 virtual const struct rpc_method *get_rpc_methods();
jonmarsh 0:dda4072af5ff 255 #endif
jonmarsh 0:dda4072af5ff 256
jonmarsh 0:dda4072af5ff 257 private :
jonmarsh 0:dda4072af5ff 258
jonmarsh 0:dda4072af5ff 259 DigitalOut _nrst;
jonmarsh 0:dda4072af5ff 260 Serial _ser;
jonmarsh 0:dda4072af5ff 261
jonmarsh 0:dda4072af5ff 262 void motor (int motor, float speed);
jonmarsh 0:dda4072af5ff 263 virtual int _putc(int c);
jonmarsh 0:dda4072af5ff 264 virtual int _getc();
jonmarsh 0:dda4072af5ff 265
jonmarsh 0:dda4072af5ff 266 int raw_white_levels[5];
jonmarsh 0:dda4072af5ff 267
jonmarsh 0:dda4072af5ff 268 };
jonmarsh 0:dda4072af5ff 269
jonmarsh 0:dda4072af5ff 270 #endif