Diff: FreeIMU.h

Revision:

0:21840c01d3d7

Child:

2:5c419926dcd7

diff -r 000000000000 -r 21840c01d3d7 FreeIMU.h
--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/FreeIMU.h	Sat Nov 02 17:25:51 2013 +0000
@@ -0,0 +1,176 @@
+/*
+FreeIMU.h - A libre and easy to use orientation sensing library for Arduino
+Copyright (C) 2011 Fabio Varesano <fabio at varesano dot net>
+
+Development of this code has been supported by the Department of Computer Science,
+Universita' degli Studi di Torino, Italy within the Piemonte Project
+http://www.piemonte.di.unito.it/
+
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the version 3 GNU General Public License as
+published by the Free Software Foundation.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+
+*/
+
+#ifndef FreeIMU_h
+#define FreeIMU_h
+
+// Uncomment the appropriated version of FreeIMU you are using
+//#define FREEIMU_v01
+//#define FREEIMU_v02
+//#define FREEIMU_v03
+//#define FREEIMU_v035
+//#define FREEIMU_v035_MS
+//#define FREEIMU_v035_BMP
+#define FREEIMU_v04
+
+// 3rd party boards. Please consider donating or buying a FreeIMU board to support this library development.
+//#define SEN_10121 //IMU Digital Combo Board - 6 Degrees of Freedom ITG3200/ADXL345 SEN-10121 http://www.sparkfun.com/products/10121
+//#define SEN_10736 //9 Degrees of Freedom - Razor IMU SEN-10736 http://www.sparkfun.com/products/10736
+//#define SEN_10724 //9 Degrees of Freedom - Sensor Stick SEN-10724 http://www.sparkfun.com/products/10724
+//#define SEN_10183 //9 Degrees of Freedom - Sensor Stick  SEN-10183 http://www.sparkfun.com/products/10183
+//#define ARDUIMU_v3 //  DIYDrones ArduIMU+ V3 http://store.diydrones.com/ArduIMU_V3_p/kt-arduimu-30.htm or https://www.sparkfun.com/products/11055
+#define GEN_MPU6050 // Generic MPU6050 breakout board. Compatible with GY-521, SEN-11028 and other MPU6050 wich have the MPU6050 AD0 pin connected to GND.
+
+// *** No configuration needed below this line ***
+
+
+#define FREEIMU_LIB_VERSION "20121122"
+
+#define FREEIMU_DEVELOPER "Fabio Varesano - varesano.net"
+
+#if F_CPU == 16000000L
+  #define FREEIMU_FREQ "16 MHz"
+#elif F_CPU == 8000000L
+  #define FREEIMU_FREQ "8 MHz"
+#endif
+
+
+// board IDs
+
+#if defined(FREEIMU_v04)
+  #define FREEIMU_ID "FreeIMU v0.4"
+#endif
+
+
+#define HAS_MPU6050() (defined(FREEIMU_v04) || defined(GEN_MPU6050))
+
+#define IS_6DOM() (defined(SEN_10121) || defined(GEN_MPU6050))
+#define HAS_AXIS_ALIGNED() (defined(FREEIMU_v01) || defined(FREEIMU_v02) || defined(FREEIMU_v03) || defined(FREEIMU_v035) || defined(FREEIMU_v035_MS) || defined(FREEIMU_v035_BMP) || defined(FREEIMU_v04) || defined(SEN_10121) || defined(SEN_10736))
+
+
+
+//#include <Wire.h>
+
+#include "mbed.h"
+#include "calibration.h"
+/*
+#ifndef CALIBRATION_H
+#include <EEPROM.h>
+#endif
+
+#define FREEIMU_EEPROM_BASE 0x0A
+#define FREEIMU_EEPROM_SIGNATURE 0x19
+*/
+//#if FREEIMU_VER <= 3
+
+#if HAS_MPU6050()
+ // #include <Wire.h>
+  #include "I2Cdev.h"
+  #include "MPU6050.h"
+  #define FIMU_ACCGYRO_ADDR MPU6050_DEFAULT_ADDRESS
+
+#endif
+
+#include <HMC58X3.h>
+#include <MS561101BA.h>
+
+
+#define FIMU_BARO_ADDR MS561101BA_ADDR_CSB_LOW
+
+
+#define FIMU_BMA180_DEF_ADDR BMA180_ADDRESS_SDO_LOW
+#define FIMU_ITG3200_DEF_ADDR ITG3200_ADDR_AD0_LOW // AD0 connected to GND
+// HMC5843 address is fixed so don't bother to define it
+
+
+#define twoKpDef  (2.0f * 0.5f) // 2 * proportional gain
+#define twoKiDef  (2.0f * 0.1f) // 2 * integral gain
+
+#ifndef cbi
+#define cbi(sfr, bit) (_SFR_BYTE(sfr) &= ~_BV(bit))
+#endif
+
+class FreeIMU
+{
+  public:
+    FreeIMU();
+    void init();
+    void init(bool fastmode);
+    
+    void init(int accgyro_addr, bool fastmode);
+    
+    #ifndef CALIBRATION_H
+    void calLoad();
+    #endif
+    void zeroGyro();
+    void getRawValues(int16_t * raw_values);
+    void getValues(float * values);
+    void getQ(float * q);
+    void getEuler(float * angles);
+    void getYawPitchRoll(float * ypr);
+    void getEulerRad(float * angles);
+    void getYawPitchRollRad(float * ypr);
+    void gravityCompensateAcc(float * acc, float * q);
+    float getRawPressure();
+    
+    float getBaroAlt();
+    float getBaroAlt(float sea_press);
+    
+    // we make them public so that users can interact directly with device classes
+
+      MPU6050 accgyro;
+      MS561101BA baro;
+      HMC58X3 magn;
+    
+    int* raw_acc, raw_gyro, raw_magn;
+    // calibration parameters
+    int16_t gyro_off_x, gyro_off_y, gyro_off_z;
+    int16_t acc_off_x, acc_off_y, acc_off_z, magn_off_x, magn_off_y, magn_off_z;
+    float acc_scale_x, acc_scale_y, acc_scale_z, magn_scale_x, magn_scale_y, magn_scale_z;
+    
+  private:
+
+    void AHRSupdate(float gx, float gy, float gz, float ax, float ay, float az, float mx, float my, float mz);
+
+    //float q0, q1, q2, q3; // quaternion elements representing the estimated orientation
+    float iq0, iq1, iq2, iq3;
+    float exInt, eyInt, ezInt;  // scaled integral error
+    volatile float twoKp;      // 2 * proportional gain (Kp)
+    volatile float twoKi;      // 2 * integral gain (Ki)
+    volatile float q0, q1, q2, q3; // quaternion of sensor frame relative to auxiliary frame
+    volatile float integralFBx,  integralFBy, integralFBz;
+    Timer update;
+    int dt_us;
+    //unsigned long lastUpdate, now; // sample period expressed in milliseconds
+    float sampleFreq; // half the sample period expressed in seconds
+    
+    void getQ_simple(float* q);
+};
+
+float invSqrt(float number);
+void arr3_rad_to_deg(float * arr);
+
+
+
+#endif // FreeIMU_h
+