센서보드 RF IRQ 테스트 중
Fork of stm-spirit1-rf-driver by
source/libs/Contiki_STM32_Library/contiki-conf.h
- Committer:
- Wolfgang Betz
- Date:
- 2017-09-01
- Revision:
- 75:8dc65c09af67
- Parent:
- 67:93bec0baf1de
File content as of revision 75:8dc65c09af67:
/** ****************************************************************************** * @file platform/stm32nucleo-spirit1/contiki-conf.h * @author System LAB * @version V1.0.0 * @date 17-May-2015 * @brief Contiki configuration parameters ****************************************************************************** * @attention * * <h2><center>© COPYRIGHT(c) 2014 STMicroelectronics</center></h2> * * Redistribution and use in source and binary forms, with or without modification, * are permitted provided that the following conditions are met: * 1. Redistributions of source code must retain the above copyright notice, * this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright notice, * this list of conditions and the following disclaimer in the documentation * and/or other materials provided with the distribution. * 3. Neither the name of STMicroelectronics nor the names of its contributors * may be used to endorse or promote products derived from this software * without specific prior written permission. * * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. * ****************************************************************************** */ /*---------------------------------------------------------------------------*/ #ifndef __CONTIKI_CONF_H__ #define __CONTIKI_CONF_H__ /*---------------------------------------------------------------------------*/ #include "platform-conf.h" //#include "project-conf.h" /*---------------------------------------------------------------------------*/ #define SLIP_BRIDGE_CONF_NO_PUTCHAR 1 #define NETSTACK_CONF_RDC_CHANNEL_CHECK_RATE 8 #define NULLRDC_CONF_802154_AUTOACK 0 #define NETSTACK_CONF_FRAMER framer_802154 #define NETSTACK_CONF_NETWORK sicslowpan_driver #undef NETSTACK_CONF_RDC #define NETSTACK_CONF_RDC nullrdc_driver #define NETSTACK_RDC_HEADER_LEN 0 #undef NETSTACK_CONF_MAC #define NETSTACK_CONF_MAC csma_driver #define NETSTACK_MAC_HEADER_LEN 0 #define SICSLOWPAN_CONF_MAC_MAX_PAYLOAD \ (NETSTACK_RADIO_MAX_PAYLOAD_LEN - NETSTACK_MAC_HEADER_LEN - \ NETSTACK_RDC_HEADER_LEN ) #define RIMESTATS_CONF_ENABLED 0 #define RIMESTATS_CONF_ON 0 /* Network setup for IPv6 */ #define CXMAC_CONF_ANNOUNCEMENTS 0 /* A trick to resolve a compilation error with IAR. */ #ifdef __ICCARM__ #define UIP_CONF_DS6_AADDR_NBU 1 #endif /* radio driver blocks until ACK is received */ #define NULLRDC_CONF_ACK_WAIT_TIME (0) #define CONTIKIMAC_CONF_BROADCAST_RATE_LIMIT 0 #define IEEE802154_CONF_PANID 0xABCD #define AODV_COMPLIANCE #define WITH_ASCII 1 #define PROCESS_CONF_NUMEVENTS 8 #define PROCESS_CONF_STATS 1 /*#define PROCESS_CONF_FASTPOLL 4*/ #define LINKADDR_CONF_SIZE 8 #define UIP_CONF_LL_802154 1 #define UIP_CONF_LLH_LEN 0 #define UIP_CONF_ROUTER 1 /* configure number of neighbors and routes */ #ifndef UIP_CONF_DS6_ROUTE_NBU #define UIP_CONF_DS6_ROUTE_NBU 30 #endif /* UIP_CONF_DS6_ROUTE_NBU */ #ifndef UIP_CONF_ND6_SEND_RA #define UIP_CONF_ND6_SEND_RA 0 #endif #define UIP_CONF_ND6_REACHABLE_TIME 600000 //90000// 600000 #define UIP_CONF_ND6_RETRANS_TIMER 10000 #define UIP_CONF_IPV6 1 #ifndef UIP_CONF_IPV6_QUEUE_PKT #define UIP_CONF_IPV6_QUEUE_PKT 0 #endif /* UIP_CONF_IPV6_QUEUE_PKT */ #define UIP_CONF_IP_FORWARD 0 #ifndef UIP_CONF_BUFFER_SIZE //#define UIP_CONF_BUFFER_SIZE 280 #define UIP_CONF_BUFFER_SIZE 600 #endif #define SICSLOWPAN_CONF_MAXAGE 4 #define SICSLOWPAN_CONF_MAX_ADDR_CONTEXTS 2 #ifndef SICSLOWPAN_CONF_MAX_MAC_TRANSMISSIONS #define SICSLOWPAN_CONF_MAX_MAC_TRANSMISSIONS 5 #endif /* SICSLOWPAN_CONF_MAX_MAC_TRANSMISSIONS */ #define UIP_CONF_ICMP_DEST_UNREACH 1 #define UIP_CONF_DHCP_LIGHT #define UIP_CONF_LLH_LEN 0 #ifndef UIP_CONF_RECEIVE_WINDOW #define UIP_CONF_RECEIVE_WINDOW 150 #endif #ifndef UIP_CONF_TCP_MSS #define UIP_CONF_TCP_MSS UIP_CONF_RECEIVE_WINDOW #endif #define UIP_CONF_MAX_CONNECTIONS 4 #define UIP_CONF_MAX_LISTENPORTS 8 #define UIP_CONF_UDP_CONNS 12 #define UIP_CONF_FWCACHE_SIZE 30 #define UIP_CONF_BROADCAST 1 #define UIP_ARCH_IPCHKSUM 0 #define UIP_CONF_UDP 1 #define UIP_CONF_UDP_CHECKSUMS 1 #define UIP_CONF_TCP 1 /*---------------------------------------------------------------------------*/ /* include the project config */ /* PROJECT_CONF_H might be defined in the project Makefile */ #ifdef PROJECT_CONF_H #include "project-conf.h" #endif /* PROJECT_CONF_H */ /*---------------------------------------------------------------------------*/ #endif /* CONTIKI_CONF_H */ /*---------------------------------------------------------------------------*/