JunMo Hong
센서보드 RF IRQ 테스트 중
Fork of
stm-spirit1-rf-driver
by 
ST
Diff: source/libs/Contiki_STM32_Library/spirit1-config.h
- Revision:
- 67:93bec0baf1de
- Parent:
- 45:2d01cc9bc761
--- a/source/libs/Contiki_STM32_Library/spirit1-config.h Wed Jul 05 14:02:16 2017 +0200 +++ b/source/libs/Contiki_STM32_Library/spirit1-config.h Thu Jul 06 11:13:31 2017 +0200 @@ -1,79 +1,79 @@ -/* - * Copyright (c) 2012, STMicroelectronics. - * All rights reserved. - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * 1. Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * 2. Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in the - * documentation and/or other materials provided with the distribution. - * 3. Neither the name of the Institute nor the names of its contributors - * may be used to endorse or promote products derived from this software - * without specific prior written permission. - * - * THIS SOFTWARE IS PROVIDED BY THE INSTITUTE AND CONTRIBUTORS ``AS IS'' AND - * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE - * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE - * ARE DISCLAIMED. IN NO EVENT SHALL THE INSTITUTE OR CONTRIBUTORS BE LIABLE - * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL - * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS - * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) - * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT - * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY - * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF - * SUCH DAMAGE. - * - * This file is part of the Contiki operating system. - * - */ -/*---------------------------------------------------------------------------*/ -#ifndef __SPIRIT1_CONFIG_H__ -#define __SPIRIT1_CONFIG_H__ -/*---------------------------------------------------------------------------*/ -#include "radio.h" -#include "SPIRIT_Config.h" -#include "spirit1-const.h" -/*---------------------------------------------------------------------------*/ -#define CCA_THRESHOLD -98.0 /* dBm */ -#define XTAL_FREQUENCY 50000000 /* Hz */ -#define SPIRIT_MAX_FIFO_LEN (96) // betzw - WAS: 600 -/*---------------------------------------------------------------------------*/ - -/* Sometimes Spirit1 seems to NOT deliver (correctly) the 'IRQ_RX_DATA_READY' - * event for packets which have a length which is close to a multiple of - * RX FIFO size. Furthermore, in these cases also the content delivery seems - * to be compromised as well as the generation of RX/TX FIFO errors. - * This can be avoided by reducing the maximum packet length to a value which - * is lower than the RX FIFO size. - * - * Enable beyond macro if you want to use the version of the driver which avoids - * FIFO overflows by reducing packet length. - * - * NOTE: the non delivery of event 'IRQ_RX_DATA_READY' MUST still be - * investigated further deeply (both on HW & SW level)! - */ -#define RX_FIFO_THR_WA - -/** - * The MAX_PACKET_LEN is an arbitrary value used to define the two array - * spirit_txbuf and spirit_rxbuf. - * The SPIRIT1 supports with its packet handler a length of 65,535 bytes, - * and in direct mode (without packet handler) there is no limit of data. - */ -#ifdef RX_FIFO_THR_WA -#define MAX_PACKET_LEN (SPIRIT_MAX_FIFO_LEN-1) -#else -#define MAX_PACKET_LEN (255) // betzw - WAS: SPIRIT_MAX_FIFO_LEN, but LEN_WIDTH is set to 7 so the variable payload length is theoretically from 0 to 255 bytes -#endif - -/*---------------------------------------------------------------------------*/ -/** - * Spirit1 IC version - */ -#define SPIRIT1_VERSION SPIRIT_VERSION_3_0 -/*---------------------------------------------------------------------------*/ -#endif /* __SPIRIT1_CONFIG_H__ */ -/*---------------------------------------------------------------------------*/ +/* + * Copyright (c) 2012, STMicroelectronics. + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * 1. Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * 3. Neither the name of the Institute nor the names of its contributors + * may be used to endorse or promote products derived from this software + * without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE INSTITUTE AND CONTRIBUTORS ``AS IS'' AND + * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE + * ARE DISCLAIMED. IN NO EVENT SHALL THE INSTITUTE OR CONTRIBUTORS BE LIABLE + * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS + * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) + * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT + * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY + * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF + * SUCH DAMAGE. + * + * This file is part of the Contiki operating system. + * + */ +/*---------------------------------------------------------------------------*/ +#ifndef __SPIRIT1_CONFIG_H__ +#define __SPIRIT1_CONFIG_H__ +/*---------------------------------------------------------------------------*/ +#include "radio.h" +#include "SPIRIT_Config.h" +#include "spirit1-const.h" +/*---------------------------------------------------------------------------*/ +#define CCA_THRESHOLD -98.0 /* dBm */ +#define XTAL_FREQUENCY 50000000 /* Hz */ +#define SPIRIT_MAX_FIFO_LEN (96) // betzw - WAS: 600 +/*---------------------------------------------------------------------------*/ + +/* Sometimes Spirit1 seems to NOT deliver (correctly) the 'IRQ_RX_DATA_READY' + * event for packets which have a length which is close to a multiple of + * RX FIFO size. Furthermore, in these cases also the content delivery seems + * to be compromised as well as the generation of RX/TX FIFO errors. + * This can be avoided by reducing the maximum packet length to a value which + * is lower than the RX FIFO size. + * + * Enable beyond macro if you want to use the version of the driver which avoids + * FIFO overflows by reducing packet length. + * + * NOTE: the non delivery of event 'IRQ_RX_DATA_READY' MUST still be + * investigated further deeply (both on HW & SW level)! + */ +#define RX_FIFO_THR_WA + +/** + * The MAX_PACKET_LEN is an arbitrary value used to define the two array + * spirit_txbuf and spirit_rxbuf. + * The SPIRIT1 supports with its packet handler a length of 65,535 bytes, + * and in direct mode (without packet handler) there is no limit of data. + */ +#ifdef RX_FIFO_THR_WA +#define MAX_PACKET_LEN (SPIRIT_MAX_FIFO_LEN-1) +#else +#define MAX_PACKET_LEN (255) // betzw - WAS: SPIRIT_MAX_FIFO_LEN, but LEN_WIDTH is set to 7 so the variable payload length is theoretically from 0 to 255 bytes +#endif + +/*---------------------------------------------------------------------------*/ +/** + * Spirit1 IC version + */ +#define SPIRIT1_VERSION SPIRIT_VERSION_3_0 +/*---------------------------------------------------------------------------*/ +#endif /* __SPIRIT1_CONFIG_H__ */ +/*---------------------------------------------------------------------------*/