Diff: arch/TARGET_K64F/hardware_init_MK64F12.c

Revision:

10:ab9330955226

--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/arch/TARGET_K64F/hardware_init_MK64F12.c	Thu Apr 24 10:45:51 2014 +0100
@@ -0,0 +1,92 @@
+/*
+ * Copyright (c) 2013 - 2014, Freescale Semiconductor, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ *
+ * o Redistributions of source code must retain the above copyright notice, this list
+ *   of conditions and the following disclaimer.
+ *
+ * o Redistributions in binary form must reproduce the above copyright notice, this
+ *   list of conditions and the following disclaimer in the documentation and/or
+ *   other materials provided with the distribution.
+ *
+ * o Neither the name of Freescale Semiconductor, Inc. nor the names of its
+ *   contributors may be used to endorse or promote products derived from this
+ *   software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE FOR
+ * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
+ * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+#include "fsl_port_hal.h"
+#include "fsl_clock_manager.h"
+#include "fsl_device_registers.h"
+#include "fsl_sim_hal.h"
+
+/*******************************************************************************
+ * Code
+ ******************************************************************************/
+void k64f_init_eth_hardware(void)
+{
+    uint8_t count;
+
+    /* Disable the mpu*/
+    BW_MPU_CESR_VLD(0);
+    
+    /* Open POTR clock gate*/
+    for (count = 0; count < HW_PORT_INSTANCE_COUNT; count++)
+    {
+        clock_manager_set_gate(kClockModulePORT, count, true);
+    }
+
+    /* Configure gpio*/
+    port_hal_mux_control(HW_PORTA, 12, kPortMuxAlt4);  /*!< ENET RMII0_RXD1/MII0_RXD1*/
+    port_hal_mux_control(HW_PORTA, 13, kPortMuxAlt4);  /*!< ENET RMII0_RXD0/MII0_RXD0*/
+    port_hal_mux_control(HW_PORTA, 14, kPortMuxAlt4);  /*!< ENET RMII0_CRS_DV/MII0_RXDV*/
+    port_hal_mux_control(HW_PORTA, 15, kPortMuxAlt4);  /*!< ENET RMII0_TXEN/MII0_TXEN*/
+    port_hal_mux_control(HW_PORTA, 16, kPortMuxAlt4);  /*!< ENET RMII0_TXD0/MII0_TXD0*/
+    port_hal_mux_control(HW_PORTA, 17, kPortMuxAlt4);  /*!< ENET RMII0_TXD01/MII0_TXD1*/
+    port_hal_mux_control(HW_PORTB, 0, kPortMuxAlt4);   /*!< ENET RMII0_MDIO/MII0_MDIO*/
+    port_hal_configure_open_drain(HW_PORTB,0, true);   /*!< ENET RMII0_MDC/MII0_MDC*/
+
+    // Added for FRDM-K64F
+    port_hal_pull_select(HW_PORTB, 0, kPortPullUp);
+    port_hal_configure_pull(HW_PORTB, 0, true);
+  
+    port_hal_mux_control(HW_PORTB, 1, kPortMuxAlt4);
+    /* Configure GPIO for MII interface */
+    port_hal_mux_control(HW_PORTA, 9, kPortMuxAlt4);   /*!< ENET MII0_RXD3*/
+    port_hal_mux_control(HW_PORTA, 10, kPortMuxAlt4);   /*!< ENET MII0_RXD2*/
+    port_hal_mux_control(HW_PORTA, 11, kPortMuxAlt4);   /*!< ENET MII0_RXCLK*/
+    port_hal_mux_control(HW_PORTA, 24, kPortMuxAlt4);   /*!< ENET MII0_TXD2*/
+    port_hal_mux_control(HW_PORTA, 25, kPortMuxAlt4);   /*!< ENET MII0_TXCLK*/
+    port_hal_mux_control(HW_PORTA, 26, kPortMuxAlt4);   /*!< ENET MII0_TXD3*/
+    port_hal_mux_control(HW_PORTA, 27, kPortMuxAlt4);   /*!< ENET MII0_CRS*/
+    port_hal_mux_control(HW_PORTA, 28, kPortMuxAlt4);   /*!< ENET MII0_TXER*/
+    port_hal_mux_control(HW_PORTA, 29, kPortMuxAlt4);   /*!< ENET MII0_COL*/  
+#if FSL_FEATURE_ENET_SUPPORT_PTP
+    port_hal_mux_control(HW_PORTC, (16 + ENET_TIMER_CHANNEL_NUM), kPortMuxAlt4); /* ENET ENET0_1588_TMR0*/
+    port_hal_configure_drive_strength(HW_PORTC, (16 + ENET_TIMER_CHANNEL_NUM), kPortHighDriveStrength); 
+#endif
+
+    /* Open ENET clock gate*/
+    clock_manager_set_gate(kClockModuleENET,0,true);
+
+    /* Select the ptp timer  outclk*/
+    clock_hal_set_clock_source(kSimClockTimeSrc, 2);
+}
+
+/*******************************************************************************
+ * EOF
+ ******************************************************************************/
+