Jan Jongboom
/
mbed-edge-tutorial-firmware
This is the firmware for the 'Connecting devices to Pelion Device Management using Mbed Edge' tutorial
README.md@2:f76a61a91e47, 2018-08-14 (annotated)
- Committer:
- Jan Jongboom
- Date:
- Tue Aug 14 12:27:31 2018 +0200
- Revision:
- 2:f76a61a91e47
- Parent:
- 1:8f3bde1e6384
Report stdin status back
Who changed what in which revision?
User | Revision | Line number | New contents of line |
---|---|---|---|
Jan Jongboom |
0:2f1d715b6434 | 1 | # Mbed Edge tutorial |
Jan Jongboom |
0:2f1d715b6434 | 2 | |
Jan Jongboom |
1:8f3bde1e6384 | 3 | This is the firmware for the 'Connecting devices to Pelion Device Management using Mbed Edge' tutorial. It implements a simple proprietary serial protocol. Connect to the device on baud rate 115,200. |
Jan Jongboom |
0:2f1d715b6434 | 4 | |
Jan Jongboom |
0:2f1d715b6434 | 5 | **Commands** |
Jan Jongboom |
0:2f1d715b6434 | 6 | |
Jan Jongboom |
0:2f1d715b6434 | 7 | Send `+LED1\r` to turn the LED on. |
Jan Jongboom |
0:2f1d715b6434 | 8 | |
Jan Jongboom |
0:2f1d715b6434 | 9 | Send `-LED1\r` to turn the LED off. |
Jan Jongboom |
0:2f1d715b6434 | 10 | |
Jan Jongboom |
0:2f1d715b6434 | 11 | **Events** |
Jan Jongboom |
0:2f1d715b6434 | 12 | |
Jan Jongboom |
0:2f1d715b6434 | 13 | When the on-board button was pressed `<BTN=XX\r\n` is emitted, where `XX` is the total button count. |