Diff: config/falfalla.h

Revision:

12:083662bca47d

Child:

13:b088f0db7158

--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/config/falfalla.h	Tue Feb 12 12:56:21 2019 +0000
@@ -0,0 +1,68 @@
+#ifndef FALFALLA_H
+#define FALFALLA_H
+
+#define SWITCH_CHECK 1400
+#define NUMBER_FALFALLA 2 //何号機かを入れるとそれに応じて#if以下が変わって設定が変わる
+
+static float g_kpELE=2.0;
+static float g_kiELE=0.0;
+static float g_kdELE=0.0;
+static float g_kpRUD=3.0;
+static float g_kiRUD=0.0;
+static float g_kdRUD=0.0;
+static float g_kpAIL=3.0;
+static float g_kiAIL=0.0;
+static float g_kdAIL=0.0;
+
+static float g_rightloopROLL=-17.0;
+static float g_rightloopROLL_approach=-17.0;
+static float g_rightloopPITCH=-6.3;
+static float g_rightloopPITCH_approach = -15.0;
+static float g_leftloopROLL=16.0;
+static float g_leftloopROLL_approach=16.0;
+static float g_leftloopPITCH=-6.0;
+static float g_leftloopPITCH_approach=-13.0;
+static float g_gostraightROLL=2.0;
+static float g_gostraightPITCH=-3.0;
+static float g_takeoffTHR=1.0;
+static float g_loopTHR=0.58;
+
+static float g_rightloopROLLshort=-20.0;
+static float g_rightloopPITCHshort=-7.0;
+static float g_leftloopROLLshort=22.0;
+static float g_leftloopPITCHshort=-6.0;
+
+static float g_glideloopROLL = -5.0;      //rewrite
+static float g_glideloopPITCH = 0.0;
+static float g_autoonPITCH = -3.0;
+
+static int g_rightloopRUD = 1500;
+static int g_rightloopRUD_approach=1500;
+static int g_rightloopshortRUD = 1500;
+static int g_leftloopRUD = 1500;
+static int g_leftloopRUD_approach = 1710;
+static int g_leftloopshortRUD = 1500;
+static int g_glideloopRUD = 1500;
+
+static int g_AIL_L_correctionrightloop = 0;
+static int g_AIL_L_correctionrightloopshort = 0;
+static int g_AIL_L_correctionleftloop = 0;
+static int g_AIL_L_correctionleftloopshort = 0;
+
+
+#if NUMBER_FALFALLA == 1    //1号機
+const int8_t Reverce_falfalla[4] = {1,-1,1,1};   //Nutral:1 , Reverce:-1
+
+#elif NUMBER_FALFALLA == 2  //2号機
+const int16_t Reverce_falfalla[4] = {1,-1,1,-1};   //Nutral:1 , Reverce:-1
+
+#endif
+
+
+#endif /* ESTRELA_H_ */
+
+/*
+x軸回り    ロール
+y軸回り    ピッチ
+z軸回り    ヨー
+*/
\ No newline at end of file